Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASTM-A65 2001

ASTM-A65 2001

$35.75

A65-01 Standard Specification for Steel Track Spikes

Published By Publication Date Number of Pages
ASTM 2001 3
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Categories: ,

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

1.1 This specification covers steel track spikes used as fastenings between railroad rails, tie plates, and ties.

1.2 Two grades of spikes are described, Grades 1 and 2, previously known as ‘soft’ and ‘high carbon’ steel.

1.3 Supplementary Requirement (S1) specifying copper content is provided. It shall apply only when specified by the purchaser.

1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Related products

  • ASTM-A675 2003

    ASTM-A675 2003

    A675/A675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties Published By Publication…

    $35.75 Add to cart
  • ASTM-A265 2009

    ASTM-A265 2009

    A265-09 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate Published By Publication Date Number…

    $40.63 Add to cart
  • ASTM-A265 2003

    ASTM-A265 2003

    A265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate Published By Publication Date Number…

    $40.63 Add to cart
  • ASTM-A965 2010

    ASTM-A965 2010

    A965/A965M-10 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…

    $40.63 Add to cart
  • ASTM-A635 2009(Redline)

    ASTM-A635 2009(Redline)

    A635/A635M-09b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength…

    $31.20 Add to cart
  • ASTM-A645 2010

    ASTM-A645 2010

    A645/A645M-10 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated…

    $35.75 Add to cart
  • ASTM-A653 2006

    ASTM-A653 2006

    A653/A653M-06 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $44.96 Add to cart
  • ASTM-A66 2001

    ASTM-A66 2001

    A66-01 Standard Specification for Steel Screw Spikes Published By Publication Date Number of Pages ASTM…

    $35.75 Add to cart
  • ASTM-A653 2009

    ASTM-A653 2009

    A653/A653M-09 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $44.96 Add to cart
  • ASTM-A653 2000

    ASTM-A653 2000

    A653/A653M-00 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $40.63 Add to cart
  • ASTM-A635 2001

    ASTM-A635 2001

    A635/A635M-01 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural,…

    $40.63 Add to cart
  • ASTM-G65 2000

    ASTM-G65 2000

    G65-00e1 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus Published By…

    $44.96 Add to cart
  • ASTM-A865 2006

    ASTM-A865 2006

    A865/A865M-06 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for…

    $40.63 Add to cart
  • ASTM-A653 2009

    ASTM-A653 2009

    A653/A653M-09a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $44.96 Add to cart
  • ASTM-A656 2011(Redline)

    ASTM-A656 2011(Redline)

    A656/A656M-11 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability (Redline) Published…

    $24.05 Add to cart
  • ASTM-A6/A6M 2021(Redline)

    ASTM-A6/A6M 2021(Redline)

    A6/A6M-21 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet…

    $61.75 Add to cart
  • ASTM-A653 2008

    ASTM-A653 2008

    A653/A653M-08 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $44.96 Add to cart
  • ASTM-A653 2001

    ASTM-A653 2001

    A653/A653M-01 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $40.63 Add to cart
  • ASTM-A645 2005

    ASTM-A645 2005

    A645/A645M-05 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated…

    $35.75 Add to cart
  • ASTM-G65 2004

    ASTM-G65 2004

    G65-04 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus Published By…

    $44.96 Add to cart
  • ASTM-A656 2011

    ASTM-A656 2011

    A656/A656M-11 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability Published By…

    $35.75 Add to cart
  • ASTM-A65 2007

    ASTM-A65 2007

    A65-07 Standard Specification for Steel Track Spikes Published By Publication Date Number of Pages ASTM…

    $35.75 Add to cart
  • ASTM-A565 2003

    ASTM-A565 2003

    A565-03 Standard Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High-Temperature Service…

    $35.75 Add to cart
  • ASTM-A965 2001

    ASTM-A965 2001

    A965/A965M-01 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…

    $40.63 Add to cart
  • ASTM-A565 2010

    ASTM-A565 2010

    A565/A565M-10 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service Published By Publication Date…

    $35.75 Add to cart
  • ASTM-A656 2005

    ASTM-A656 2005

    A656/A656M-05 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability Published By…

    $35.75 Add to cart
  • ASTM-A565 2003

    ASTM-A565 2003

    A565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service Published By Publication Date…

    $35.75 Add to cart
  • ASTM-A65 2007(Redline)

    ASTM-A65 2007(Redline)

    A65-07 Standard Specification for Steel Track Spikes (Redline) Published By Publication Date Number of Pages…

    $23.40 Add to cart
  • ASTM-A965 2005

    ASTM-A965 2005

    A965/A965M-05 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…

    $40.63 Add to cart
  • ASTM-A6/A6M 2021

    ASTM-A6/A6M 2021

    A6/A6M-21 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet…

    $67.71 Add to cart
  • ASTM-A657 2008(Redline)

    ASTM-A657 2008(Redline)

    A657/A657M-03(2008)e1 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced…

    $27.30 Add to cart
  • ASTM-A675 2009

    ASTM-A675 2009

    A675/A675M-03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties Published By Publication…

    $35.75 Add to cart
  • ASTM-A653 2001

    ASTM-A653 2001

    A653/A653M-01a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $40.63 Add to cart
  • ASTM-A656 2010(Redline)

    ASTM-A656 2010(Redline)

    A656/A656M-10 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability (Redline) Published…

    $24.05 Add to cart
  • ASTM-A653 2010

    ASTM-A653 2010

    A653/A653M-10 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $44.96 Add to cart
  • ASTM-A656 2003

    ASTM-A656 2003

    A656/A656M-03 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability Published By…

    $35.75 Add to cart
  • ASTM-A653 2007

    ASTM-A653 2007

    A653/A653M-07 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…

    $44.96 Add to cart
  • ASTM-A625 2003

    ASTM-A625 2003

    A625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced Published By Publication Date…

    $35.75 Add to cart
  • ASTM-A635 2008

    ASTM-A635 2008

    A635/A635M-08 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength…

    $40.63 Add to cart
  • ASTM-A659 2001

    ASTM-A659 2001

    A659/A659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25…

    $35.75 Add to cart
ASTM-A65 2001
$35.75