ASTM-C884 1998
$35.75
C884/C884M-98 Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
| Published By | Publication Date | Number of Pages |
| ASTM | 1998 | 2 |
1.1 This test method covers the determination of which epoxy-resin formulations are subject to debonding when used as overlays for concrete when the combination of the two is subjected to temperature changes that may be met in the field.
1.2 The values stated in inch-pound units are to be regarded as the standard.
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in Section 7.
Related products
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
ASTM-C880 1998
C880-98 Standard Test Method for Flexural Strength of Dimension Stone Published By Publication Date Number…
-
ASTM-C88 1999
C88-99a Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium…
-
ASTM-C184:1994 Edition
C184-94e1 Standard Test Method for Fineness of Hydraulic Cement by the 150-µm (No. 100) and…
-
ASTM-C854 1990
C854-90 Test Method for Resistance to External Loads on Metal Reflective Pipe Insulation (Withdrawn 1997)…
-
BICSI ITSIMM 8 v2 2022
Information Technology Systems Installation Methods Manual (ITSIMM), 8th Edition Published By Publication Date Number of…
-
ICC IFC Commentary 2012
International Fire Code and Commentary Published By Publication Date Number of Pages ICC 2012 1343
-
ASTM-C887 1996
C887-79a(1996)e1 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar Published By Publication…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Approved Draft) Published By…
-
ASTM-C804 1988
C804-83(1988)e1 Practices for Use of Solvent-Release Type Sealants Published By Publication Date Number of Pages…
-
ASTM-B884 1997
B884-97 Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications Published By…
-
AGMA 6001-F19:2019 Edition
Design and Selection of Components for Enclosed Gear Drives Published By Publication Date Number of…
-
ASTM-C584 1999
C584-81(1999) Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products Published…
-
ICC IBC Commentary BothVolumes 2012
IBC Code and Commentary Combo, Vol. 1 & 2 Published By Publication Date Number of…
-
ASTM-C684 1999
C684-99 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens Published…
-
ASTM-C824 1996
C824-91(1996) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass…
-
IEEE 802.16-2009
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless…
-
ASTM-C886 1998
C886-98 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials Published By…
-
ASME BPVC II D M 2015
ASME BPVC – II – D – M -2015 BPVC Section II, Materials, Part D,…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
ICC IFC CommentaryVol 1 2 2018 1stPrint
International Fire Code and Commentary Published By Publication Date Number of Pages ICC 2018 1603
-
IFC Commentary 09 2009
International Fire Code and Commentary Published By Publication Date Number of Pages ICC 2009 1263
-
ASTM-C384 1998
C384-98 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube…
-
ASCE 9780784411384 2010
Pipelines 2010 Published By Publication Date Number of Pages ASCE 2010 1590
-
BICSI TDMM 15 v1 2024
BICSI Telecommunications Distribution Methods Manual (TDMM), 15th Edition Published By Publication Date Number of Pages…
-
ASTM-F884 1996
F884-96 Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner…
-
AGMA 6101-F19:2019 Edition
Design and Selection of Components for Enclosed Gear Drives (Metric Edition) Published By Publication Date…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
ASTM-C889 1999
C889-99 Standard Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3)…
-
ASTM-C883 1989
C883-89 Standard Test Method for Effective Shrinkage of Epoxy-Resin Systems Used With Concrete (Withdrawn 1996)…
-
IEEE 802.16 2009
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless…
-
ASTM-C882 1999
C882-99 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant…
-
ASTM-E884 1993
E884-82(1993) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities Published By Publication…
-
ASME A17.1 2013 w ERRATA 0121
ASME A17.1 / CSA B44 – 2013 Safety Code for Elevators and Escalators with February…
-
ASTM-C888 1997
C888-97 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder Published By Publication Date Number of…
-
ASME BPVC CC NC Edtn 2007
ASME BPVC CODE CASES: Nuclear Components-2007 Published By Publication Date Number of Pages ASME 2007
-
ASTM-C848 1999
C848-88(1999) Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares…
-
IEEE 802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks (Published) Published By Publication…
-
ASTM-C784 1993
C784-93e1 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets (Withdrawn 2002) Published By Publication…
-
ASTM-C864 1999
C864-99 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers Published By…
