ASTM-D2481:2002 Edition
$35.75
D2481-81(2002) Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
Published By | Publication Date | Number of Pages |
ASTM | 2002 | 4 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This test method determines the relative effectiveness of wood preservatives in small wood specimens exposed to a natural marine environment. It is not within the scope of this procedure to determine the retention or duration of protection for commercial size piles and timbers.
1.2 The requirements for preparing the material for testing and the test procedures appear in the following order:
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Section |
|
Summary of Test Method | 3 |
Assembly of Test Specimens | 9 |
Treatment Procedure | 7 |
Inspection | 11 |
Evaluation of Results | 12 |
Pretreatment Handling | 6 |
Reports | 13 |
Test Specimens | 5 |
Post-Treatment Handling | 8 |
Exposure | 10 |
ICS Codes | 71.100.50 - Wood-protecting chemicals |
Related products
-
ASTM-D1481:2007 Edition(Redline)
D1481-02(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by…
-
ASTM-D1481:2012 Edition(Redline)
D1481-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by…
-
ASTM-D2881:2019 Edition(Redline)
D2881-19 Standard Classification for Metalworking Fluids and Related Materials (Redline) Published By Publication Date Number…
-
ASTM-D2581:2001 Edition
D2581-01 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials Published By Publication Date…
-
ASTM-D2581:2002 Edition
D2581-02 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials Published By Publication Date…
-
ASTM-E2481:2008 Edition
E2481-08 Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules Published By Publication…
-
ASTM-D2281:2005 Edition
D2281-68(2005) Standard Test Method for Evaluation of Wetting Agents by the Skein Test Published By…
-
ASTM-D2281:2016 Edition
D2281-10(2016) Standard Test Method for Evaluation of Wetting Agents by the Skein Test Published By…
-
ASTM-D5481:2020 Edition
D5481-13(2020) Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell…
-
ASTM-D1481:1991 Edition
D1481-91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by…
-
ASTM-D2421:2019 Edition
D2421-19 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume,…
-
ASTM-D3481:2002 Edition
D3481-97(2002) Standard Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous…
-
ASTM-D5481:2021 Edition
D5481-21 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell…
-
ASTM-D2471:1999 Edition
D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins…
-
ASTM-D5481:2013 Edition(Redline)
D5481-13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell…
-
ASTM-D7481:2009 Edition
D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a…
-
ASTM-D2281:1997 Edition
D2281-68(1997) Standard Test Method for Evaluation of Wetting Agents by the Skein Test Published By…
-
ASTM-D1481:2007 Edition
D1481-02(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by…
-
ASTM-D2421:2001 Edition
D2421-01 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume,…
-
ASTM-D2381:1999 Edition
D2381-87(1999)e1 Standard Test Methods for Flexible Composite Materials Used for Electrical Insulation (Withdrawn 2005) Published…
-
ASTM-E2481:2018 Edition
E2481-12(2018) Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules Published By Publication…
-
ASTM-D2881:2003 Edition
D2881-03 Standard Classification for Metal Working Fluids and Related Materials Published By Publication Date Number…
-
ASTM-D2481:1994 Edition
D2481-81(1994)e1 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means…
-
ASTM-D5481:2020 Edition(Redline)
D5481-20a Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell…
-
ASTM-D2421:2007 Edition
D2421-02(2007) Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume,…
-
ASTM-D2421:2013 Edition
D2421-13 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume,…
-
ASTM-D2981:2009 Edition
D2981-94(2009) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion Published…
-
ASTM-D2481:2005 Edition
D2481-05 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means…
-
ASTM-D5481:2021 Edition(Redline)
D5481-21 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell…
-
ASTM-D4481:2015 Edition
D4481-10(2015) Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts Published By Publication Date…
-
ASTM-D5481:2020 Edition
D5481-20 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell…
-
ASTM-D2481:2005 Edition(Redline)
D2481-05 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means…
-
ASTM-D2981:1998 Edition
D2981-94(1998) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion Published…
-
ASTM-D2281:2010 Edition
D2281-10 Standard Test Method for Evaluation of Wetting Agents by the Skein Test Published By…
-
ASTM-E2481:2006 Edition
E2481-06 Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules Published By Publication…
-
ASTM-D2881:2012 Edition(Redline)
D2881-12 Standard Classification for Metalworking Fluids and Related Materials (Redline) Published By Publication Date Number…
-
ASTM-D2281:2024 Edition
D2281-10(2024) Standard Test Method for Evaluation of Wetting Agents by the Skein Test Published By…
-
ASTM-D6481:2014 Edition
D6481-14 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils…
-
ASTM-D5481:2004 Edition
D5481-04 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell…
-
ASTM-D4281:1995 Edition
D4281-95 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination Published…