ASTM-F1923:1998 Edition
$35.75
F1923-98 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
Published By | Publication Date | Number of Pages |
ASTM | 1998 | 3 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This test method covers measurements for comparative tire strength and dimensional characteristics. This test method covers new and retreaded pneumatic tires, both tube and tubeless types, and flaps when applicable, for mounting on construction, earthmoving, mining and logging equipment, graders, mobile cranes, and similar vehicles operated at low speeds off the road.
1.2 The SI units given are to be regarded as standard. The units given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Title | F1923-98 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway |
---|---|
Published Code | ASTM |
Publication Date | 1998 |
Pages Count | 3 |
ICS Codes | 83.160.99 - Other tyres |
This document does not provide a preview.
Related products
-
ASTM-E1923:2003 Edition
E1923-97(2003) Standard Guide for Sampling Terrestrial and Wetlands Vegetation Published By Publication Date Number of…
-
ASTM-F1023:2012 Edition(Redline)
F1023-12 Standard Specification for Dispensers, Powdered Iced Tea (Redline) Published By Publication Date Number of…
-
ASTM-F1973:1999 Edition
F1973-99 Standard Specification for Factory Assebled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel…
-
ASTM-F1023:2012 Edition
F1023-12 Standard Specification for Dispensers, Powdered Iced Tea Published By Publication Date Number of Pages…
-
ASTM-F1963:2023 Edition
F1963-05(2023) Standard Specification for Deep-Fat Fryers, Gas or Electric, Open Published By Publication Date Number…
-
ASTM-F1423:2009 Edition
F1423-09 Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal…
-
ASTM-F1924:2011 Edition
F1924-05(2011) Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas…
-
ASTM-F1123:2019 Edition
F1123-87(2019) Standard Specification for Non-Metallic Expansion Joints Published By Publication Date Number of Pages ASTM…
-
ASTM-F1913:2010 Edition
F1913-04(2010) Standard Specification for Vinyl Sheet Floor Covering Without Backing Published By Publication Date Number…
-
ASTM-F1993:2022 Edition
F1993-16(2022) Standard Classification System of Human Land Search and Rescue Resources Published By Publication Date…
-
ASTM-F1923:2014 Edition
F1923-98(2014) Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway Published By Publication Date…
-
ASTM-F1823:2007 Edition
F1823-97(2007) Standard Guide for Water Rescue Personal Flotation Device (PFD) Published By Publication Date Number…
-
ASTM-F1925:2017 Edition
F1925-17 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants Published By…
-
ASTM-F1921:2012 Edition
F1921-12 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends…
-
ASTM-F1923:2005 Edition
F1923-98(2005) Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway Published By Publication Date…
-
ASTM-F1920:2020 Edition
F1920-20 Standard Test Method for Performance of Rack Conveyor Commercial Dishwashing Machines Published By Publication…
-
ASTM-F1823:2012 Edition
F1823-97(2012) Standard Guide for Water Rescue Personal Flotation Device (PFD) Published By Publication Date Number…
-
ASTM-F1927:2007 Edition
F1927-07 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at…
-
ASTM-F1223:2014 Edition
F1223-14 Standard Test Method for Determination of Total Knee Replacement Constraint Published By Publication Date…
-
ASTM-F1922:1998 Edition
F1922-98 Standard Test Method for Tires, Pneumatic, Vehicular, Highway Published By Publication Date Number of…
-
ASTM-D1923:1967 Edition
D1923-67 Method of Test for Tensile Properties of Thin Plastic Sheeting Using the Inclined Plane…
-
ASTM-F1926:1999 Edition
F1926-99 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings Published…
-
ASTM-F1983:2014 Edition
F1983-14 Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications…
-
ASTM-F1973:2021 Edition(Redline)
F1973-21 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
ASTM-F1922:2021 Edition(Redline)
F1922-21 Standard Test Method for Tires, Pneumatic, Vehicular, Highway (Redline) Published By Publication Date Number…
-
ASTM-F1920:2007 Edition
F1920-07 Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines Published By Publication…
-
ASTM-F1953:2010 Edition(Redline)
F1953-10 Standard Guide for Construction and Maintenance of Grass Tennis Courts (Redline) Published By Publication…
-
ASTM-F1923:2021 Edition(Redline)
F1923-21 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway (Redline) Published By Publication…
-
ASTM-F1953:2010 Edition
F1953-10 Standard Guide for Construction and Maintenance of Grass Tennis Courts Published By Publication Date…
-
ASTM-F1023:2018 Edition
F1023-12(2018) Standard Specification for Dispensers, Powdered Iced Tea Published By Publication Date Number of Pages…
-
ASTM-F1922:2021 Edition
F1922-21 Standard Test Method for Tires, Pneumatic, Vehicular, Highway Published By Publication Date Number of…
-
ASTM-F1929:2015 Edition(Redline)
F1929-15 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration…
-
ASTM-F1223:2020 Edition(Redline)
F1223-20 Standard Test Method for Determination of Total Knee Replacement Constraint (Redline) Published By Publication…
-
ASTM-F1922:2014 Edition
F1922-98(2014) Standard Test Method for Tires, Pneumatic, Vehicular, Highway Published By Publication Date Number of…
-
ASTM-F1924:2019 Edition
F1924-19 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas…
-
ASTM-F1923:2021 Edition
F1923-21 Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway Published By Publication Date…
-
ASTM-F1973:2021 Edition
F1973-21 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and…
-
ASTM-F1925:2022 Edition
F1925-22 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants Published By…
-
ASTM-F1223:2020 Edition
F1223-20 Standard Test Method for Determination of Total Knee Replacement Constraint Published By Publication Date…
-
ASTM-F1983:2023 Edition
F1983-23 Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications…