BS 3858:1992
$102.76
Specification for binding and identification sleeves for use on electric cables and wires
| Published By | Publication Date | Number of Pages |
| BSI | 1992 | 16 |
This British Standard specifies requirements and tests for binding and identification sleeves intended for use on electric cables and insulated wires.
NOTE These sleeves are not for use as primary insulation The standard applies to sleeves of the following types:
-
type 1 sleeves are polychloroprene and suitable for temperature ranges of – 65 °C to 70 °C;
-
type 3 sleeves are poly(vinyl chloride) (PVC) and suitable for temperature ranges of – 65 °C to 70 °C;
-
type 4 sleeves are PVC/nitrile and suitable for temperature ranges of – 65 °C to 70 °C;
-
type 5 sleeves are silicone and suitable for temperature ranges of – 65 °C to 150 °C.
Related products
-
BS EN 2858-3:1994
Titanium and titanium alloys. Forging stock and forgings. Technical specifications – Pre-production and production forgings…
-
AS/NZS 1491:1996
Finger jointed structural timber Published By Publication Date Number of Pages AS 1996-04-04 24
-
BS ISO/IEC 10744:1997:1998 Edition
Information technology. Hypermedia/time-based structuring language (HyTime) Published By Publication Date Number of Pages BSI 1998…
-
BS 3958-2:1982
Thermal insulating materials – Calcium silicate preformed insulation Published By Publication Date Number of Pages…
-
BS 3958-6:1972
Thermal insulating materials – Finishing materials; hard setting composition, self-setting cement and gypsum plaster Published…
-
BS EN 29314-2:1995
Information processing systems. Fibre Distributed Data Interface (FDDI) – Token Ring Media Access Control (MAC)…
-
BS EN 385:1995
Finger jointed structural timber. Performance requirements and minimum production requirements Published By Publication Date Number…
-
BS 3878:1982
Specification for flexible PVC sheeting for hospital use Published By Publication Date Number of Pages…
-
BS EN 23758:1994
Textiles. Care labelling code using symbols Published By Publication Date Number of Pages BSI 1994…
-
BS ISO 3058:1998
Non-destructive testing. Aids to visual inspection. Selection of low-power magnifiers Published By Publication Date Number…
-
BS 3958-4:1982
Thermal insulating materials – Bonded preformed man-made mineral fibre pipe sections Published By Publication Date…
-
BSI PAS 43:2006
Safe working of vehicle breakdown, recovery and removal operations. Management system specification Published By Publication…
-
BS 388:1972
Specification for aluminium pigments Published By Publication Date Number of Pages BSI 1972 20
-
BS EN ISO 9029:1997
Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method…
-
BS 7377:1991:1993 Edition
Specification for step stools Published By Publication Date Number of Pages BSI 1993 30
-
BS 4584-2:1972:1982 Edition
Specification for metal-clad base materials for printed circuits – Epoxide woven glass fabric copper-clad laminated…
-
BS 7499-1:1991
Manned security services – Code of practice for static guarding and mobile patrol services Published…
-
BS 3868:1995
Specification for prefabricated drainage stack units in galvanized steel Published By Publication Date Number of…
-
BS 5293-14:1991
Sampling and testing carbon black for use in the rubber industry – Method for determination…
-
BS EN 2858-2:1994
Titanium and titanium alloys. Forging stock and forgings. Technical specification. – Forging stock Published By…
-
BS 3558-1:1997
Glossary of rubber terms – International terms Published By Publication Date Number of Pages BSI…
-
BS 5728-6:1993
Measurement of flow of cold potable water in closed conduits – Test methods for combination…
-
BS 3958-1:1982
Thermal insulating materials – Magnesia preformed insulation Published By Publication Date Number of Pages BSI…
-
BS ISO 3888-1:1999
Passenger cars. Test track for a severe lane-change manoeuvre – Double-lane change Published By Publication…
-
BS EN 61347-1:2001+A1:2008:2010 Edition
Lamp controlgear – General and safety requirements Published By Publication Date Number of Pages BSI…
-
BS 4858:1972
Specification for silo tanks for liquid milk and milk products Published By Publication Date Number…
-
BS EN 2858-1:1994
Titanium and titanium alloys. Forging stock and forgings. Technical specifications – General requirements Published By…
-
BS EN 3058:1994
Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads…
-
BS 6446:1997
Specification for manufacture of glued structural components of timber and wood based panels Published By…
-
BS EN 120001:1993:1991 Edition
Harmonized system of quality assessment for electronic components. Blank detail specification. Light emitting diodes, light…
-
BS EN ISO 3868:1995
Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method Published By…
-
BS EN 61036:1997:2002 Edition
Alternating current static watt-hour meters for active energy (classes 1 and 2) Published By Publication…
-
BS EN 855:1997
Plastics hoses and hose assemblies. Thermoplastics textile reinforced hydraulic type. Specification Published By Publication Date…
-
BS 3858:1965:1978 Edition
Specification for binding and identification sleeves for use on electric cables and wires Published By…
-
BS 7858:1996
Code of practice for security screening of personnel employed in a security environment Published By…
-
BS EN ISO 3838:1996:1985 Edition
Methods for determination of density or relative density of petroleum and petroleum products (pyknometer methods)…
-
BS 5293-15:1991
Sampling and testing carbon black for use in the rubber industry – Method for determination…
-
BS EN 20865:1992
Slots in platens for projection welding machines Published By Publication Date Number of Pages BSI…
-
BS ISO 3858:2004
Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract Published By Publication…
-
BS 2A 302:2000 2001
Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification Published…
