ISO 8378-1:1986
$27.30
Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides — Part 1: Dimensional, physical and magnetic characteristics
| Published By | Publication Date | Number of Pages |
| ISO | 1986-12 | 19 |
Provides the dimensional, physical and magnetic characteristics of 130 mm (5,25 in) flexible disk cartridges for data interchange between EDP systems with modified frequency modulation recording on 80 tracks on each side and recorded at 7 958 ftprad, 3,8 tpmm (96 tpi). Applicable in conjunction with ISO 8378 and ISO 8378/2 or 8378/3. References: ISO 7665 and ISO 9293.
Related products
-
BS EN ISO 8308:2008
Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing…
-
BS ISO/IEC 8348:1993
Information technology. Open systems interconnection. Network service definition Published By Publication Date Number of Pages…
-
BS 7020-7.1:1988:1989 Edition
Analysis of iron ores. Methods for the determination of sulphur content – Gravimetric method Published…
-
ASME B18.5.2.1M 06:2006 Edition
ASME B18.5.2.1M Metric Round Head Short Square Neck Bolts Published By Publication Date Number of…
-
BS EN 28318:1992:1987 Edition
Complete, filled transport packages. Methods for determination of resistance to sinusoidal variable frequency vibration Published…
-
ISO 8378-3:1986
Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified…
-
ISO 8378-2:1986
Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified…
-
ISO/IEC 8881:1989
Information processing systems — Data communications — Use of the X.25 packet level protocol in…
-
BS ISO/IEC 10030:1995
Information technology. Telecommunications and information exchange between systems. End System Routeing Information Exchange protocol for…
-
BS 7023-1:1988:1989 Edition
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data…
-
BS 7224:1990
Specification for use of X.25 to provide the OSI connection-mode network service Published By Publication…
-
BSI DD 134:1985
Open Systems Interconnection: network layer addressing (ISO/DIS 8348/DAD 2) Published By Publication Date Number of…
-
JIS B 1008:2009
Fasteners – Bolts and studs – Split pin holes and wire holes Published By Publication…
-
BS 5499-5:2002
Graphical symbols and signs. Safety signs, including fire safety signs – Signs with specific safety…
-
BS 6068-2.10:1984
Water quality. Physical, chemical and biochemical methods – Determination of ammonium: potentiometric method Published By…
-
BS 7111:1991
Guide to modes of operation for a 64-bit block cipher algorithm Published By Publication Date…
-
BS 2782-9 Method 941:1990
Methods of testing plastics. Sampling and test specimen preparation – Determination of maximum reversion of…
-
BS ISO/IEC 8348:1996:1998 Edition
Information technology. Open systems interconnection. Network service definition Published By Publication Date Number of Pages…
-
BS EN 28738:1992
Plain washers for clevis pins. Product grade A Published By Publication Date Number of Pages…
-
BS EN ISO 8308:1996
Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing…
-
BS ISO 8178-3:1994:1996 Edition
Reciprocating internal combustion engines. Exhaust emission measurement – Definitions and methods of measurement of exhaust…
-
BS 7023-3:1988:1989 Edition
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data…
-
AS/NZS 2994:2000
Information technology – Open Systems Interconnection – Network service definition Published By Publication Date Number…
-
BS ISO 8368:1999
Hydrometric determinations. Flow measurements in open channels using structures. Guidelines for the selection of structure…
-
BSI DD 118:1985
Open Systems Interconnection: protocol for providing the connectionless-mode network service (ISO/DIS 8473 and ISO/DIS 8348…
-
BS EN 23878:1993
Hardmetals. Vickers hardness test Published By Publication Date Number of Pages BSI 1993 14
-
BS 4434:1989
Specification for safety aspects in the design, construction and installation of refrigerating appliances and systems…
-
BS ISO 8178-4:2007:2009 Edition
Reciprocating internal combustion engines. Exhaust emission measurement – Steady-state test cycles for different engine applications…
-
BS 6783-4:1986
Sampling and analysis of nickel, ferronickel and nickel alloys – Method for determination of silver,…
-
BS 5600-4-4.6:1987
Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals – Vickers…
-
BSI DD 122:1985
Open Systems Interconnection: use of X.25 to provide the connection-oriented network service (ISO/DP 8878) Published…
-
BS 6487:1984
Specification for split pin holes and wire holes in bolts, screws and studs Published By…
-
BS 5551-3-3.6:1989:1990 Edition
Fertilizers. Physical properties – Method for determination of static angle of repose of solid fertilizers…
-
BS 7568-9:1992
Press tools – Guides for round punches Published By Publication Date Number of Pages BSI…
-
BS 7220:1990:1992 Edition
Information processing systems. Data communications. Network service definition Published By Publication Date Number of Pages…
-
CAN/CSA-ISO/IEC 10030-96:1996 Edition
Information Technology – Telecommunications and Information Exchange Between Systems – End System Routeing Information Exchange…
-
BSI DD 119:1985
Open Systems Interconnection: connection-mode network service definition (ISO/DIS 8348) Published By Publication Date Number of…
-
BS 5378-2:1980
Safety signs and colours – Specification for colorimetric and photometric properties of materials Published By…
-
BS ISO 8178-1:2006:2009 Edition
Reciprocating internal combustion engines. Exhaust emission measurement – Test-bed measurement of gaseous and particulate exhaust…
-
JIS B 1171:2005
Cup Head Square Neck Bolts Published By Publication Date Number of Pages JIS 2005-03-20 10
