ASTM-B833 2009
$40.63
B833-09 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
| Published By | Publication Date | Number of Pages |
| ASTM | 2009 | 5 |
1.1 This specification covers zinc and zinc alloy wire used to deposit zinc coatings by thermal spraying (metallizing) for the corrosion protection of steel and iron. Zinc and zinc alloy wire provided under this specification is intended for use in oxy-fuel and electric arc thermal spraying equipment. Additional zinc alloy compositions used in thermal spraying primarily for electronic applications are found in Specification B943 .
1.2 Zinc alloy wire compositions used in thermal spraying primarily for electronic applications are found in Specification B943 .
1.3 Zinc alloy wire compositions used as solders are found in Specification B907 .
1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Ordering Information |
| 2 | Materials and Manufacture Chemical Composition Physical Properties and Mechanical Properties Dimensions, Weights, and Permissible Variations Workmanship, Finish and Appearance Acceptance Tests TABLE 1 |
| 3 | TABLE 2 |
| 4 | Certification Packaging and Packaging Materials Keywords X1. PHYSICAL PROPERTIES X1.1 X1.2 |
| 5 | X2. MECHANICAL PROPERTIES X2.1 X2.2 |
Related products
-
ASTM-B533 2019
B533-85(2019) Standard Test Method for Peel Strength of Metal Electroplated Plastics Published By Publication Date…
-
ASTM-B833 2006
B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the…
-
ASTM-B933 2009
B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials Published By Publication…
-
ASTM-E833 2009
E833-09a Standard Terminology of Building Economics Published By Publication Date Number of Pages ASTM 2009…
-
ASTM-B833 2000
B833-00 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) Published By…
-
ASTM-B883 2005
B883-05 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials Published By Publication Date Number…
-
ASTM-A833 2019
A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers Published…
-
ASTM-F833 2019
F833-19 Standard Consumer Safety Performance Specification for Carriages and Strollers Published By Publication Date Number…
-
ASTM-B839 2009
B839-04(2009) Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and…
-
ASTM-B633 2019
B633-19 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel Published By Publication…
-
ASTM-B863 2008
B863-08 Standard Specification for Titanium and Titanium Alloy Wire Published By Publication Date Number of…
-
ASTM-F833 2009
F833-09 Standard Consumer Safety Performance Specification for Carriages and Strollers Published By Publication Date Number…
-
ASTM-E833 2002
E833-02a Standard Terminology of Building Economics Published By Publication Date Number of Pages ASTM 2002…
-
ASTM-A833 2001
A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers Published By…
-
ASTM-B733 2004
B733-04 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal Published By Publication Date Number…
-
ASTM-B834 2009
B834-95(2009) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS…
-
ASTM-B863 2009
B863-09 Standard Specification for Titanium and Titanium Alloy Wire Published By Publication Date Number of…
-
ASTM-A833 2008
A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers Published By…
-
ASTM-B833 2001
B833-01e1 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) Published By…
-
ASTM-E833 2009
E833-09 Standard Terminology of Building Economics Published By Publication Date Number of Pages ASTM 2009…
-
ASTM-B863 2006
B863-06a Standard Specification for Titanium and Titanium Alloy Wire Published By Publication Date Number of…
-
ASTM-B933 2009(Redline)
B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials (Redline) Published By…
-
ASTM-B835 2009
B835-04(2009) Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction Published…
-
ASTM-B803 2008(Redline)
B803-08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead…
-
ASTM-B883 2019
B883-19 Standard Specification for Metal Injection Molded (MIM) Materials Published By Publication Date Number of…
-
ASTM-B833 2001
B833-01 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) Published By…
-
ASTM-B833 2009(Redline)
B833-09 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the…
-
ASTM-E833 2008
E833-08 Standard Terminology of Building Economics Published By Publication Date Number of Pages ASTM 2008…
-
ASTM-B733 2009
B733-04(2009) Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal Published By Publication Date Number…
-
ASTM-E833 2001
E833-01a Standard Terminology of Building Economics Published By Publication Date Number of Pages ASTM 2001…
-
ASTM-B836 2005
B836-00(2005) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction Published…
-
ASTM-B823 2009
B823-09 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts Published By…
-
ASTM-B833 2005
B833-05 Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion…
-
ASTM-B837 2009
B837-01(2009) Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas…
-
ASTM-B836 2000
B836-00 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction Published…
-
ASTM-A833 2019(Redline)
A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers (Redline)…
-
ASTM-B835 2004
B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction Published…
-
ASTM-C833 2008(Redline)
C833-01(2008) Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets (Redline) Published By Publication Date Number of…
-
ASTM-B533 2009
B533-85(2009) Standard Test Method for Peel Strength of Metal Electroplated Plastics Published By Publication Date…
-
ASTM-B833 2001
B833-01a Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) Published By…
