AS 1180.14:1991
$9.75
Methods of test for hose made from elastomeric materials – Determination of reeling properties of non-collapsible hose
| Published By | Publication Date | Number of Pages |
| AS | 1991-08-09 | 4 |
Specifies the method for determining the reeling properties of non-collapsible hose with internal diameters up to 75 mm and intended for winding onto a reel. Reagents, apparatus, test pieces, procedures for petroleum-resistant hose and hose other than petroleum-resistant hose are laid down.
Scope
This Standard sets out the method for determining the reeling properties of non-collapsible hose with internal diameters up to 75 mm and intended for winding onto a reel.
Related products
-
AS 1380.1:1998
Fibre-rope slings – Product specification Published By Publication Date Number of Pages AS 1998-03-05 18
-
IEEE 14536-1995
ISO/IEC/IEEE 14536:1995 [ANSI/IEEE Std 896.5-1995] Information technology – Microprocessor systems – Futurebus+(R), Profile M (Military)…
-
ASTM-D2564 1991
D2564-91 Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems Published…
-
BS 1016-110.1:1996
Methods for analysis and testing of coal and coke. Size analysis of coke – Nominal…
-
IEEE 896.5a 1995
IEEE Standard for Futurebus+(R), Profile M (Military): Errata, Corrections, and Clarifications Published By Publication Date…
-
BS EN ISO 10715:2001:2007 Edition
Natural gas. Sampling guidelines Published By Publication Date Number of Pages BSI 2007 42
-
ASTM-E1155:1996 Edition
E1155-96 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers Published…
-
AS 1170.4 Supp 1:1993
Minimum design loads on structures (known as the SAA Loading Code) – Earthquake loads –…
-
ISO 11014-1:1994
Safety data sheet for chemical products — Part 1: Content and order of sections Published…
-
AS 1189.1:1991
Data processing – Vocabulary – Fundamental terms Published By Publication Date Number of Pages AS…
-
ASTM-D3311:1992 Edition
D3311-92 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns Published By Publication…
-
BS 3656:1981
Specification for asbestos-cement pipes, joints and fittings for sewerage and drainage Published By Publication Date…
-
BS 1016-18:1981
Methods for analysis and testing of coal and coke – Size analysis of coke Published…
-
IEEE 1101.4-1993
IEEE Standard for Military Module, Format E Form Factor Published By Publication Date Number of…
-
TCNA A108 A118 A136 2024
ANSI A108-A118-A136.1 Tile Industry Specifications Published By Publication Date Number of Pages TCNA 2024 228
-
ASME BPVC X 2023
ASME BPVC.X-2023 Section X, Fiber-Reinforced Plastic Pressure Vessels Published By Publication Date Number of Pages…
-
IEEE 1101.4 1993
IEEE Standard for Military Module, Format E Form Factor Published By Publication Date Number of…
-
AS 1170.4:1993
Minimum design loads on structures (known as the SAA Loading Code) – Earthquake loads Published…
-
TCNA A108 A118 A136 November 2021
ANSI A108-A118-A136.1 American National Specifications or the Installation of Ceramic Tile, Release Date: November 2021…
-
IEEE 896.5 1994
IEEE Standard for Futurebus+(R), Profile M (Military) Published By Publication Date Number of Pages IEEE…
-
IEEE 896.5a-1994
IEEE Standard for Futurebus+(R), Profile M (Military): Errata, Corrections, and Clarifications Published By Publication Date…
-
AS 1189.11:1991
Data processing – Vocabulary – Processing units Published By Publication Date Number of Pages AS…
-
AS 1418.14:1996
Cranes (including hoists and winches) – Requirements for cranes subject to arduous working conditions Published…
-
BS 5418:1979
Specification for marking of general purpose industrial valves Published By Publication Date Number of Pages…
-
AS 1189.12:1991
Data processing – Vocabulary – Peripheral equipment Published By Publication Date Number of Pages AS…
-
BS ISO 728:2021
Coke. Size analysis by sieving Published By Publication Date Number of Pages BSI 2021 18
-
ASTM-D4294 1998
D4294-90(1998)e1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy Published…
-
AGMA 1010-F14:2014 Edition
Appearance of Gear Teeth – Terminology of Wear and Failure Published By Publication Date Number…
-
IEEE 802.16 2009
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless…
-
AS 1180.5:1999
Methods of test for hose made from elastomeric materials – Hydrostatic pressure Published By Publication…
-
NFPA 79 2015
NFPA 79: Electrical Standard for Industrial Machinery Handbook Published By Publication Date Number of Pages…
-
AS 1189.18:1991
Data processing – Vocabulary – Distributed data processing Published By Publication Date Number of Pages…
-
IEEE 896.5-1993
IEEE Standard for Futurebus+(R), Profile M (Military) Published By Publication Date Number of Pages IEEE…
-
AS 1189.19:1991
Data processing – Vocabulary – Analog computing Published By Publication Date Number of Pages AS…
-
CSA B1800:21:2021 Edition
Thermoplastic non-pressure piping compendium (Including revision history of 2021) Published By Publication Date Number of…
-
AS/NZS 1050.14:1994
Methods for the analysis of iron and steel – Determination of manganese in iron and…
-
BS EN 61078:2006
Analysis techniques for dependability. Reliability block diagram and Boolean methods Published By Publication Date Number…
-
IEEE 802.16 2002
IEEE Standard for Local and Metropolitan Area Networks – Part 16: Air Interface for Fixed…
-
AS 1189.4:1991
Data processing – Vocabulary – Organization of data Published By Publication Date Number of Pages…
-
IEEE 802.16-2009
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless…