AS 1617.5:2003 (R2013)
$15.60
Refractory bricks and shapes – Magnesite, chrome
| Published By | Publication Date | Number of Pages |
| AS | 2003-03-25 | 13 |
Sets out requirements for machine-made, basic refractory bricks.
Scope
This Standard specifies requirements for machine-made, basic refractory bricks. This Standard deals with—
(a) classification in terms of composition and type of bonding;
(b) dimensional tolerances;
(c) texture and surface appearance; and
(d) permanent dimensional change after heating.
Related products
-
AS 1617.3:2003 (R2013)
Refractory bricks and shapes – High alumina Published By Publication Date Number of Pages AS…
-
ASTM-B61:2013 Edition
B61-08(2013) Standard Specification for Steam or Valve Bronze Castings Published By Publication Date Number of…
-
AS/NZS CISPR 16.4.5:2013
Specification for radio disturbance and immunity measuring apparatus and methods – Uncertainties, statistics and limit…
-
AS 1817.1:2003 (R2017)
Metallic materials – Vickers hardness test – Test methods (ISO 6507-1:1997, MOD) Published By Publication…
-
ASTM-D1998:2013 Edition
D1998-13 Standard Specification for Polyethylene Upright Storage Tanks Published By Publication Date Number of Pages…
-
ASTM-D6175:2013 Edition
D6175-03(2013) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles…
-
AS 1617.4:2003 (R2013):2002 Edition
Refractory bricks and shapes – Silica Published By Publication Date Number of Pages AS 2002-03-25…
-
AS 1627.2:2002 (R2017)
Metal finishing – Preparation and pretreatment of surfaces – Power tool cleaning Published By Publication…
-
IEEE 1613.1 2013
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution…
-
ASTM-D6785 2013(Redline)
D6785-13 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite…
-
AS 3637.5:2005 (R2017)
Underground mining – Winding suspension equipment – Rope swivels and swivel hooks Published By Publication…
-
AS 1817.3:2002 (R2017)
Metallic materials – Vickers hardness test – Calibration of reference blocks Published By Publication Date…
-
ISO 16165:2013
Ships and marine technology — Marine environment protection — Terminology relating to oil spill response…
-
AS 1817.2:2002 (R2017)
Metallic materials – Vickers hardness test – Verification of testing machines Published By Publication Date…
-
BS EN 12175:2013
Chemicals used for treatment of water intended for human consumption. He xafluorosilicic acid Published By…
-
AS/NZS CISPR 16.2.5:2013
Specification for radio disturbance and immunity measuring apparatus and methods-In situ measurements of disturbing emissions…
-
AS 1627.5:2003 (R2017)
Metal finishing – Preparation and pretreatment of surfaces – Pickling Published By Publication Date Number…
-
ISO/TR 16115:2013
Gas cylinders — Classification of imperfections arising during the manufacture of seamless steel and aluminium…
-
AS 1627.6:2003 (R2017)
Metal finishing – Preparation and pretreatment of surfaces – Chemical conversion treatment of metals Published…
-
ISO 16145-4:2013
Ships and marine technology — Protective coatings and inspection method — Part 4: Automated measuring…
-
ASTM-D7072 2013
D7072-04(2013) Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings Published By Publication Date Number…
-
BSI 13/30282903 DC:2013 Edition
BS EN 16475-2. Chimneys. Accessories. Part 2. Chimney fans. Requirements and test methods Published By…
-
AS 1617.2:2003 (R2013)
Refractory bricks and shapes – Insulating Published By Publication Date Number of Pages AS 2003-03-25…
-
BSI 13/30287004 DC:2013 Edition
BS EN 61755-6-1. Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces.…
-
AS 1617.1:2003 (R2013)
Refractory bricks and shapes – Fireclay Published By Publication Date Number of Pages AS 2003-03-25…
-
ASTM-D4378 2013
D4378-13 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined…
-
BS ISO 24631-7:2012:2013 Edition
Radiofrequency identification of animals – Synchronization of ISO 11785 identification systems Published By Publication Date…
-
BSI PD CEN/TS 16375:2013
Liming materials. Determination of the amount of residual finely ground carbonate in soils. Volumetric method…
-
ASTM-E2254 2013
E2254-13 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers Published By Publication…
-
IEEE 1671.2 2013
IEEE Standard for Automatic Test Markup Language (ATML) Instrument Description Published By Publication Date Number…
-
ISO/TS 16195:2013
Nanotechnologies — Guidance for developing representative test materials consisting of nano-objects in dry powder form…
-
AS 1627.4:2005 (R2017)
Metal finishing – Preparation and pretreatment of surfaces – Abrasive blast cleaning of steel Published…
-
AS 1418.5:2013
Cranes, hoists and winches-Mobile cranes (EN 13000:2010, MOD) Published By Publication Date Number of Pages…
-
ASTM-E2864 2013
E2864-13 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area…
-
BSI PD ISO/TR 16115:2013:2014 Edition
Gas cylinders. Classification of imperfections arising during the manufacture of seamless steel and aluminium alloy…
-
AS 1627.1:2003 (R2017)
Metal finishing – Preparation and pretreatment of surfaces – Removal of oil, grease and related…
-
ASTM-D7334 2013
D7334-08(2013) Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle…
-
ASTM-D7540 2013
D7540-09(2013) Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller Published By Publication…
-
IEEE 1613.1-2013
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution…
-
AS 1627.9:2002 (R2017)
Metal finishing – Preparation and pretreatment of surfaces – Pictorial surface preparation standards for painting…
