AS 2252.1:2002
$27.30
Biological safety cabinets – Biological safety cabinets (Class I) for personnel and environment protection
| Published By | Publication Date | Number of Pages |
| AS | 2002-11-13 | 24 |
Specifies requirements for Class I biological safety cabinets which are intended to provide protection from hazardous biological agents for personnel and the environment.
Scope
This Standard specifies requirements for Class I biological safety cabinets which are intended to provide protection from hazardous biological agents for personnel and the environment. The cabinets are exhaust-ventilated and provide protection by means of an inward flow of air away from the operator and by high efficiency particulate air (HEPA) filtration of exhaust air.
It is essential that this Standard be read in conjunction with AS/NZS 2647, which describes recommended practices for installation and use of these cabinets.
NOTES:
1 These cabinets are intended only for handling materials which can be inactivated or rendered safe by an effective decontamination procedure such as that described in AS/NZS 2647.
2 Additional design requirements may apply to cabinets which are required to afford protection against other hazards such as toxic materials not of biological origin or against radiation.
3 For work with cytotoxic drugs, the user is referred to AS 2567.
4 Ergonomic considerations for the design and use of biological safety cabinets are addressed in Appendix A.
Related products
-
AS/NZS 2243.1:2005
Safety in laboratories – Planning and operational aspects Published By Publication Date Number of Pages…
-
AS 2224.1:2009
Medicine measures – Glass Published By Publication Date Number of Pages AS 2009-05-13 20
-
ISO 22561:2020
Gasoline engines with direct fuel injection (GDI engines) — Installation of the injectors to the…
-
AS/NZS 2632.1:2020
Codes for the representation of names of countries and their subdivisions – Country code Published…
-
AS 2862.1:2008
Copper, lead, zinc and nickel concentrates – Sampling – Sampling procedures for determination of metal…
-
AS/NZS 2201.1:2007
Intruder alarm systems – Client’s premises – Design, installation, commissioning and maintenance Published By Publication…
-
AS/NZS 2512.1:2009
Methods of testing protective helmets – Definitions and headforms Published By Publication Date Number of…
-
AS 2362.1:2002 (R2016)
Fire detection, warning, control and intercom systems – Methods of test – Heat sensitivity testing…
-
AS 4292.1:2006
Railway safety management – General requirements Published By Publication Date Number of Pages AS 2006-01-05…
-
AS ISO 3452.1:2020
Non-destructive testing – Penetrant testing – General principles Published By Publication Date Number of Pages…
-
NZS 5257.1:2004
Gas industry audit protocol Published By Publication Date Number of Pages SNZ 2004-06-30 32
-
AS 2278.1:2022
Aerosol containers Metal aerosol dispensers of capacity 50 mL to 1 000 mL inclusive Published…
-
AS/NZS 2269.1:2012
Plywood – Structural – Determination of structural properties – Test methods Published By Publication Date…
-
AS 2550.1:2002
Cranes, hoists and winches – Safe use – General requirements Published By Publication Date Number…
-
AS 2293.1:2005
Emergency escape lighting and exit signs for buildings – System design, installation and operation Published…
-
AS/NZS 2211.1:2004
Safety of laser products – Equipment classification, requirements and user’s guide (IEC 60825-1:2001, MOD) Published…
-
AS 2278.1:2008
Aerosol containers – Metal aerosol dispensers of capacity 50 mL to 1000 mL inclusive Published…
-
ACI 225.1T 2020
ACI 225.1T-20: Removal of Optional Alkali Limit in Standard Specifications for Portland Cement Published By…
-
ISO/TR 22521:2005
Portable hand-held forestry machines — Vibration emission values at the handles — Comparative data in…
-
AS 2625.1:2003
Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – General guidelines…
-
AS 2213.1:2001
Commercial road vehicles – Mechanical connections between towing vehicles – Selection and marking of pin-type…
-
ISO 22531:2020
Optics and photonics — Optical materials and components — Test method for climate resistance of…
-
AS 2452.1:2004 (R2017)
Non-destructive testing – Determination of thickness – Determination of wall thickness of pipe by the…
-
ISO 22522:2007
Matériel de protection des cultures — Mesurage au champ de la répartition de la pulvérisation…
-
AS 2252.2:2009
Controlled environments – Biological safety cabinets Class II – Design Published By Publication Date Number…
-
AS 2205.2.1:2003 (R2018)
Methods for destructive testing of welds in metal – Transverse butt tensile tests Published By…
-
AS 2582.1:2003 (R2020)
Complete, filled transport packages – Methods of test – Identification of parts when testing Published…
-
AS/NZS 2642.1:2007
Polybutylene (PB) plumbing pipe systems – Polybutylene (PB) pipe extrusion compounds Published By Publication Date…
-
AS 2252.2:2004
Biological safety cabinets – Laminar flow biological safety cabinets (Class II) for personnel, environment and…
-
AS 2452.3:2005
Non-destructive testing – Determination of thickness – Use of ultrasonic testing Published By Publication Date…
-
ISO 22201:2009
Lifts (elevators) — Design and development of programmable electronic systems in safety-related applications for lifts…
-
ISO 22721:2007
Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for underground…
-
ISO 28521:2009
Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and…
-
AS/NZS 2455.1:2007
Textile floor coverings – Installation practice – General Published By Publication Date Number of Pages…
-
ISO 22524:2020
Pilot plan for industrial wastewater treatment facilities in the objective of water reuse Published By…
-
AS 2856.1:2000 (R2013)
Coal petrography – Preparation of coal samples for incident light microscopy Published By Publication Date…
-
AS 2205.1:2003 (R2018)
Methods for destructive testing of welds in metal – General requirements for tests Published By…
-
AS 2156.1:2001 (R2018)
Walking tracks – Classification and signage Published By Publication Date Number of Pages AS 2001-05-28…
-
AS 4254.1:2012
Ductwork for air-handling systems in buildings-Flexible duct Published By Publication Date Number of Pages AS…
-
AS 4256.1:2006 (R2018)
Plastic roof and wall cladding materials – General requirements Published By Publication Date Number of…
