AS 2726.1:2004
$27.30
Chainsaws – Safety requirements – Chainsaws for general use
| Published By | Publication Date | Number of Pages |
| AS | 2004-04-30 | 21 |
Specifies safety requirements for portable hand-held electrically driven and internal combustion engine driven chainsaws. It does not apply to pole-mounted power pruners, hydraulic chainsaws, attachments fitted to chainsaws and mechanical aids assisting the task of cutting wood. The requirements are based on those specified in ISO 11681-1 but consideration was also given to ANSI B175 and IEC 60745-2-13.
Scope
This Standard specifies safety requirements for portable, hand-held, electrically driven and internal combustion engine-driven chainsaws primarily intended for cutting wood.
This Standard does not apply to—
(a) pole-mounted powered pruners;
(b) hydraulic chainsaws;
(c) attachments fitted to chainsaws; or
(d) mechanical aids assisting the task of cutting wood.
Related products
-
AS 2428.1:2004 (R2016)
Methods of testing smoke/heat release vents – Determination of resistance to leakage during rain Published…
-
AS 2327.1:2003
Composite structures – Simply supported beams Published By Publication Date Number of Pages AS 2003-08-18…
-
AS/NZS 2276.1:2004 (R2017)
Cables for traffic signal installations – Multicore power cables Published By Publication Date Number of…
-
HB 172.1:2006
Message Usage Model – History and conceptual framework Published By Publication Date Number of Pages…
-
ISO 22621-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to…
-
BS 6043-2.21.1:2001
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Air…
-
ISO 22651:2002
Chaussures — Méthodes d’essai relatives aux premières de montage — Stabilité dimensionnelle Published By Publication…
-
AS 1926.1:2007
Swimming pool safety – Safety barriers for swimming pools Published By Publication Date Number of…
-
SAE AS 27260A:2006
Tie Down, Cargo, Aircraft, CGU-1/B Published By Publication Date Number of Pages SAE 2006-06-05 13
-
AS 2806.1:2003 (R2013)
Aluminium ores – Sampling – Sampling procedures Published By Publication Date Number of Pages AS…
-
BS 6043-2.20.1:2001
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Carboxy…
-
AS 3706.1:2003
Geotextiles – Methods of test – General requirements, sampling, conditioning, basic physical properties and statistical…
-
AS/NZS 2276.3:2002 (R2017)
Cables for traffic signal installations – Loop cables for vehicle detectors Published By Publication Date…
-
HB 226.2:2000
Contract toolbox for the construction industry – Tool 2 Review of common contract conditions Published…
-
AS 2862.1:2008
Copper, lead, zinc and nickel concentrates – Sampling – Sampling procedures for determination of metal…
-
AS 2625.1:2003
Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – General guidelines…
-
AS 2316.1:2009
Artificial climbing structures and challenge courses – Fixed and mobile artificial climbing and abseiling walls…
-
AS 2726.2:2004
Chainsaws – Safety requirements – Chainsaws for tree service Published By Publication Date Number of…
-
TIA/EIA/IS-826.1:2000
Wireless Intelligent Network – Capabilities for Pre-Paid Charging – Chapter 1: Overview Published By Publication…
-
AS 2278.1:2008
Aerosol containers – Metal aerosol dispensers of capacity 50 mL to 1000 mL inclusive Published…
-
ISO/TS 17261:2005
Intelligent transport systems – Automatic vehicle and equipment identification — Intermodal goods transport architecture and…
-
ISO 22621-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to…
-
AS/NZS 2754.1(Int):2008
Adhesives for timber and timber products – Adhesives for manufacture of plywood and laminated veneer…
-
AS/NZS 62026.1:2001
Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – General rules Published By Publication Date…
-
ISO 22621-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to…
-
AS 2796.2:2006 (R2016)
Timber – Hardwood – Sawn and milled products – Grade description Published By Publication Date…
-
HB 226.1:2000
Contract toolbox for the construction industry – Tool 1 How clients and contractors ensure success…
-
AS 2156.1:2001 (R2018)
Walking tracks – Classification and signage Published By Publication Date Number of Pages AS 2001-05-28…
-
HB 226.4:2000
Contract toolbox for the construction industry – Tool 4 Book of reference wall charts Published…
-
AS/NZS 4276.1:2007
Water microbiology – General information and procedures (ISO 8199:2005, MOD) Published By Publication Date Number…
-
AS 2758.1:2014
Aggregates and rock for engineering purposes – Concrete aggregates Published By Publication Date Number of…
-
BS 6920-2.2.1:2000+A3:2014
Suitability of non-metallic products for use in contact with water intended for human consumption with…
-
ASNT 2261-2008
ASNT Level III Study Guide: Ultrasonic Testing Method Published By Publication Date Number of Pages…
-
AS 2224.1:2009
Medicine measures – Glass Published By Publication Date Number of Pages AS 2009-05-13 20
-
AS 2856.1:2000 (R2013)
Coal petrography – Preparation of coal samples for incident light microscopy Published By Publication Date…
-
AS 2362.1:2002 (R2016)
Fire detection, warning, control and intercom systems – Methods of test – Heat sensitivity testing…
-
HB 226.3:2000
Contract toolbox for the construction industry – Tool 3 Review of commonly referenced standards Published…
-
AS 2986.1:2003 (R2016)
Workplace air quality – Sampling and anlysis of volatile organic compounds by solvent desorption/gas chromatography…
-
AS 4716.1:2002
Laboratory glassware – Bottles – Screw-neck bottles Published By Publication Date Number of Pages AS…
-
AS 4826.1:2001
Geometric Product Specifications (GPS) – Inspection by measurement of workpieces and measuring equipment – Decision…
