AS 3564.5:1993
$9.75
Automotive repairs – Terminology – Engine
| Published By | Publication Date | Number of Pages |
| AS | 1993-04-13 | 7 |
Sets out a terminology for describing the reconditioning and repair of reciprocating spark ignition automotive and industrial engines by the automotive repair industry.
Scope
This Standard sets out terminology for the reconditioning and remanufacturing of reciprocating spark ignition automotive and industrial engines which are used in conjunction with standard ancillary code of practice components in applications intended by the original manufacturer.
NOTE: This Standard should be used in conjunction with AS 4182, Automotive repairs-Code of practice for reconditioning reciprocating spark ignition engines.
Related products
-
AS 3564.6:1994
Automotive repairs – Terminology – Constant velocity joints Published By Publication Date Number of Pages…
-
BS 3476:1980
Specification for boric acid and boric oxide, technical grades Published By Publication Date Number of…
-
HB 122.3.4.5:1999
The Workplace Manual – Model 3: Work/Life Elements – Element 3.4.5: Employer-provided Programs – Work/Life…
-
BS 4200-1:1967
Guide on the reliability of electronic equipment and parts used therein – Introduction Published By…
-
AS 3583.5:1991 (R2016)
Methods of test for supplementary cementitious materials for use with portland cement – Determination of…
-
BS EN ISO 9288:2022
Thermal insulation. Heat transfer by radiation. Vocabulary Published By Publication Date Number of Pages BSI…
-
BS QC 960501:1992
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches…
-
BS 6472-1:2008
Guide to evaluation of human exposure to vibration in buildings – Vibration sources other than…
-
ASTM-D4821:1999 Edition
D4821-99 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias Published By Publication…
-
AS 4594.5:1999
Internal combustion engines – Performance – Engines for land, rail-traction and marine use – Torsional…
-
AS/NZS 4524.5:1998
Bonded abrasive products – Dimensions – Part 5: Grinding wheels for surface grinding/side grinding Published…
-
BS 3228-2:1960
Procedures for obtaining the properties of steel at elevated temperatures – Rupture strength Published By…
-
AS/NZS 3646.5:1994
Information processing systems – Open Systems Interconnection – File transfer, access and management – Protocol…
-
AS 3558.5:1999 (R2016)
Methods of testing plastics and composite materials sanitary plumbing fixtures – Determination of degradation by…
-
BS 3898:1965:1970 Edition
Specification for laboratory humidity ovens (injection type) Published By Publication Date Number of Pages BSI…
-
BS 3975-5:1969
Glossary for landscape work – Horticultural, arboricultural and forestry practice Published By Publication Date Number…
-
BS 2782-1 Method 115A:1978
Methods of testing plastics. Thermal properties – Plastic yield Published By Publication Date Number of…
-
IEEE C37.40-1993
IEEE Standard Service Conditions and Definitions for High Voltage Fuses, Distribution Enclosed Single-Pole Air Switches,…
-
ASTM-D4837 1997
D4837-97 Standard Specification for Propylene Glycol Monomethyl Ether Published By Publication Date Number of Pages…
-
ASTM-D5645 1995
D5645-95A Standard Test Methods for Determining Physical Properties of Inflatable Restraint Cushions (Withdrawn 1999) Published…
-
AS/NZS 3964.2:1994
Information technology – Open Systems Interconnection – Common management information protocol – Protocol implementation conformance…
-
BS EN 253:2009+A2:2015
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly…
-
BS 2629-2:1970
Specification for pallets for materials handling for through transit – Recommendations for pallets for use…
-
BS 2942:1957:1964 Edition
Specification for formaldehyde solution Published By Publication Date Number of Pages BSI 1964 12
-
AS 3564.4:1993
Automotive repairs – Terminology – Power steering Published By Publication Date Number of Pages AS…
-
AS 3964.1:1992
Information technology – Open Systems Interconnection – Common management information protocol – Specification Published By…
-
JIS G 3545:1991
Boron Steel Wires for Cold Heading and Cold Forging Published By Publication Date Number of…
-
AS/NZS 3894.5:1995
Site testing of protective coatings – Determination of surface profile Published By Publication Date Number…
-
ASTM-D4818:1999 Edition
D4818-89(1999) Standard Classification for Rubber Compounding Materials-Vulcanization Accelerators Published By Publication Date Number of Pages…
-
BS EN IEC 60721-3-2:2018:2022 Edition
Classification of environmental conditions – Classification of groups of environmental parameters and their severities. Transportation…
-
AS 4264.5:1999 (R2013)
Coal and coke – Sampling – Guide to the inspection of mechanical sampling systems Published…
-
BS EN ISO 5457:1999+A1:2010
Technical product documentation. Sizes and layout of drawing sheets Published By Publication Date Number of…
-
BS EN ISO 9902-1:2001+A2:2014
Textile machinery. Noise test code – Common requirements Published By Publication Date Number of Pages…
-
AS/NZS 4356.5:1996 (R2016)
Medical electrical equipment – Characteristics of electro-optical X-ray image intensifiers – Determination of the detective…
-
BS ISO 5057:2022
Industrial trucks.Inspection and repair of fork arms in service on forklift trucks Published By Publication…
-
BS 3693A:1964
Recommendations for the design of scales and indexes – Recommended form of digits for use…
-
ANSI C78.1432:1997 (S2018)
American National Standard for Tungsten Halogen (TH) Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5…
-
BS 3384:1984
Specification for dental gold solders Published By Publication Date Number of Pages BSI 1984 7
-
BS EN 62020:1999:2006 Edition
Electrical accessories. Residual current monitors for household and similar uses (RCMs) Published By Publication Date…
-
AS 3587.5:1998
Ferroalloys – Chemical analysis – Determination of sulfur content – Infrared method Published By Publication…
