AS 3566.2:2002
$33.80
Self-drilling screws for the building and construction industries – Corrosion resistance requirements
| Published By | Publication Date | Number of Pages |
| AS | 2002-03-19 | 24 |
Specifies the requirements for four levels of the corrosion resistance of self-drilling screws for the building and construction industries.
Scope
This Standard specifies the requirements for corrosion resistance of self-drilling screws used in the building and construction industries.
Related products
-
AS ISO 5366.1:2004
Anaesthetic respiratory equipment – Tracheostomy tubes – Tubes and connectors for use in adults (ISO…
-
AS/NZS 2566.2:2002 (R2016)
Buried flexible pipelines – Installation Published By Publication Date Number of Pages AS 2002-08-12 93
-
AS/NZS 3666.3:2000
Air-handling and water systems of buildings – Microbial control – Performance-based maintenance of cooling water…
-
AS ISO 5366.3:2004
Anaesthetic respiratory equipment – Tracheostomy tubes – Paediatric tracheostomy tubes (ISO 5366-3:2001, MOD) Published By…
-
ASTM-D5662 2012(Redline)
D5662-12 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers…
-
AS 3706.2:2000
Geotextiles – Methods of test – Determination of tensile properties – Wide-strip method Published By…
-
AS 3565.4:2007 (R2019)
Meters for water supply – In-service compliance testing Published By Publication Date Number of Pages…
-
AS/NZS 3500.2:2003
Plumbing and drainage – Sanitary plumbing and drainage Published By Publication Date Number of Pages…
-
AS/NZS 3696.2:2008
Wheelchairs – Determination of dynamic stability of electric wheelchairs Published By Publication Date Number of…
-
AS/NZS 3560.2:2003 (R2017)
Electric cables – Cross-linked polyethylene insulated – Aerial bundled – For working voltages up to…
-
AS/NZS 3666.2:2002
Air-handling and water systems of buildings – Microbial control – Operation and maintenance Published By…
-
AS/NZS 3666.1:2002
Air-handling and water systems of buildings – Microbial control – Design, installation and commissioning Published…
-
ASTM-D5662 2006
D5662-06a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers…
-
AS 3582.2:2001
Supplementary cementitious materials for use with portland and blended cement – Slag – Ground granulated…
-
AS/NZS 4266.2:2004
Reconstituted wood-based panels – Methods of test – Dimensions, squareness, flatness and edge straightness of…
-
AS/NZS 3560.1:2000
Electric cables – Cross-linked polyethylene insulated – Aerial bundled – For working voltages up to…
-
ASTM-D5662 2012
D5662-12 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers…
-
AS/NZS 1546.2:2008
On-site domestic wastewater treatment units – Waterless composting toilets Published By Publication Date Number of…
-
IEEE 1516.2 2001
Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) – HLA Object Model Template…
-
AS 1666.2:2009 (R2019)
Wire-rope slings – Care and use Published By Publication Date Number of Pages AS 2009-04-02…
-
AS 3523.2:2008
Identification cards – Identification of issuers – Application and registration procedures Published By Publication Date…
-
ASTM-D5662 2006
D5662-06 Standard Test Method for Determining Automotive Gear Oil Compatability with Typical Oil Seal Elastomers…
-
AS 3706.2:2012
Geotextiles – Methods of test-Determination of tensile properties – Wide strip and grab method Published…
-
ASTM-D5662 2012(Redline)
D5662-12a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers…
-
AS ISO 13766.2:2020
Earth-moving and building construction machinery – Electromagnetic compatibility (EMC) of machines with internal electrical power…
-
IEEE 1516.2-2000
IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) – HLA Object Model…
-
ASTM-D5662 2008
D5662-08 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers…
-
ISO 15662:2006
Intelligent transport systems — Wide area communication — Protocol management information Published By Publication Date…
-
AS/NZS 3584.2:2008
Diesel engine systems for underground coal mines – Explosion protected Published By Publication Date Number…
-
AS 3572.2:2002
Plastics – Glass filament reinforced plastics (GRP) – Methods of test – Determination of chemical…
-
ACI 355.2 2022
ACI CODE-355.2-22: Post-Installed Mechanical Anchors in Concrete—Qualification Requirements and Commentary Published By Publication Date Number…
-
ASTM-D5662 2009
D5662-09 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers…
-
ASTM-D5662 2008
D5662-08a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers…
-
AS 3566.1:2002 (R2015)
Self-drilling screws for the building and construction industries – General requirements and mechanical properties Published…
-
AS 3564.1:2020
Automotive repairs – Terminology- Automatic transmission Published By Publication Date Number of Pages AS 2020-06-12…
-
AS/NZS 1546.2:2001
On-site domestic wastewater treatment units – Waterless composting toilets Published By Publication Date Number of…
-
AS 3571.2:2009
Plastics piping systems – Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin –…
-
AS 3864.2:2012
Medical refrigeration equipment – For the storage of blood and blood products – User-related requirements…
-
AS 3533.2:2009
Amusement rides and devices – Operation and maintenance Published By Publication Date Number of Pages…
-
AS 3507.2:2006 (R2016)
Non-destructive testing – Radiographic determination of quality of ferrous castings Published By Publication Date Number…
