AS 3962:2020
$57.20
Marina design
Published By | Publication Date | Number of Pages |
AS | 2020-03-06 | 72 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
The objective of this Standard is to provide designers, manufacturers and operators of marina and vessel berthing facilities with requirements for recreational marinas and small commercial vessels up to 50 m in length. Requirements are also given for on-shore facilities such as dry boat storage, boatlifts, boat ramps and associated parking facilities.
Scope
This Standard sets out requirements for the design of marinas suitable for vessels up to 50 m in length.
The Standard covers fixed berth and floating pontoon marina systems, single pontoons and floating wave attenuators. Requirements are also given for on-shore facilities such as dry boat storage, boatlifts, boat ramps and associated parking facilities.
The Standard covers berths, pontoons and marinas located in coastal waters, lakes, rivers and dams.
NOTE Refer to relevant authorities for additional requirements for assessment of the environmental impact of marinas.
Published Code | AS |
---|---|
Published By | Australia Standards |
Publication Date | 2020-03-06 |
Pages Count | 72 |
Language | English |
Edition | 3 |
File Size | 1.1 MB |
ISBN | 9781760727468 |
ICS Codes | 47.020.01 - General standards related to shipbuilding and marine structures |
Related products
-
ASTM-B962 2023(Redline)
B962-23 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using…
-
ISO 3262-14:2000
Matières de charge pour peintures — Spécifications et méthodes d’essai — Partie 14: Cristobalite Published…
-
AS 3992:2020
Pressure equipment – Welding and brazing qualification Published By Publication Date Number of Pages AS…
-
ISO 23962:2021
Traditional Chinese medicine — Processed Aconitum carmichaelii lateral root Published By Publication Date Number of…
-
AS 3972:2010
General purpose and blended cements Published By Publication Date Number of Pages AS 2010-10-22 29
-
BS EN 3762:2022 2023
Aerospace series. Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944). Softened and cold worked. Wire for forged fasteners. D…
-
ASTM-B962 2023
B962-23 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using…
-
AS 3952:2002 (R2015)
Water supply – Spring hydrant valve for waterworks purposes Published By Publication Date Number of…
-
ISO 3262-19:2021
Extenders — Specifications and methods of test — Part 19: Precipitated silica Published By Publication…
-
ASTM-A962/A962M 2023
A962/A962M-23 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from…
-
ISO 3262-11:2000
Extenders for paints — Specifications and methods of test — Part 11: Natural talc, in…
-
ISO 3262-18:2000
Extenders for paints — Specifications and methods of test — Part 18: Precipitated sodium aluminium…
-
ISO 3262-15:2000
Matières de charge pour peintures — Spécifications et méthodes d’essai — Partie 15: Silice vitreuse…
-
BS ISO 3862:2020
Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification…
-
BS 7962:2000 2004
Black materials for masking existing road markings. Specification Published By Publication Date Number of Pages…
-
ASTM-A962/A962M 2023(Redline)
A962/A962M-23a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from…
-
BS ISO 9362:2022
Banking. Banking telecommunication messages. Business identifier code (BIC) Published By Publication Date Number of Pages…
-
BS ISO 3966:2020
Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes Published…
-
ISO 3262-16:2000
Extenders for paints — Specifications and methods of test — Part 16: Aluminium hydroxides Published…
-
ISO 3862:2020
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids…
-
ASTM-A962/A962M 2022(Redline)
A962/A962M-22 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from…
-
BS EN ISO 3262-6:2022 2023
Extenders for paints. Specifications and methods of test – Precipitated calcium carbonate Published By Publication…
-
ASTM-F962 2023
F962-04(2023) Standard Specification for Oil Spill Response Boom Connection: Z-Connector Published By Publication Date Number…
-
ISO 9362:2022
Banking – Banking telecommunication messages – Business identifier code (BIC) Published By Publication Date Number…
-
ASTM-A962 2000
A962/A962M-00 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended…
-
ASTM-A962/A962M 2022
A962/A962M-22 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from…
-
ISO 2962:2010
Cheese and processed cheese products — Determination of total phosphorus content — Molecular absorption spectrometric…
-
ISO 3966:2020
Mesurage du débit des fluides dans les conduites fermées — Méthode d’exploration du champ des…
-
ASTM-A962 2010
A962/A962M-10 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from…
-
ISO/IEC 5962:2021
Information technology — SPDX® Specification V2.2.1 Published By Publication Date Number of Pages ISO 2021-08…
-
ISO 3262-10:2000
Matières de charge pour peintures — Spécifications et méthodes d’essai — Partie 10: Talc et…
-
ISO 3262-20:2021
Extenders — Specifications and methods of test — Part 20: Fumed silica Published By Publication…
-
ASTM-D962 2020
D962-81(2020) Standard Specification for Aluminum Powder and Paste Pigments for Paints Published By Publication Date…
-
ASTM-F962 2010
F962-04(2010) Standard Specification for Oil Spill Response Boom Connection: Z-Connector Published By Publication Date Number…
-
ISO 3262-1:2020
Matières de charge — Spécifications et méthodes d’essai — Partie 1: Introduction et méthodes d’essai…
-
UL 962:2021
Standard for Household and Commercial Furnishings Published By Publication Date Number of Pages UL 2021-01-12…
-
ASTM-A962/A962M 2023
A962/A962M-23a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from…
-
ASTM-A962/A962M 2024(Redline)
A962/A962M-24 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from…
-
AS 3862:2020
External fusion-bonded epoxy coating for steel pipes Published By Publication Date Number of Pages AS…
-
ISO 3262-19:2000
Extenders for paints — Specifications and methods of test — Part 19: Precipitated silica Published…