Sets out requirements of product performance, safety, design, construction and maintenance, including installation requirements, test conditions and procedures.
Scope
This Standard specifies requirements for the manufacture and testing of skylights comprising a factory-manufactured assembly to permit natural light transmission. The Standard includes requirements for materials, fastenings and hardware, weatherproofing, ventilation, safety labels, marking and maintenance for skylights complete and ready for installation in a roof opening. It is designed for use by manufacturers, suppliers, designers and consumers alike.
This Standard applies to factory-manufactured natural lighting systems installed into roofs including skylights (roof lights), roof windows and tubular skylights (tubular roof lights).
This Standard does not apply to complex overhead roof glazing systems, including barrel vault, atriums, conservatories and roof systems constructed from light-transmitting materials.
NOTES:
1 Alternative methods for determining compliance with this Standard are given in Appendix B.
2 While information on the choice of a skylight for a particular application is outside the scope of this Standard, information is provided in the Commentary C3.2.2 that provides some guidance in this respect.
Related products
-
SAE AMS 4289:2001
Aluminum Alloy Castings 7.0Si – 0.55Mg – 0.12Ti (F357.0-T6) Solution and Precipitation Heat Treated Published…
-
BS EN 4286:2005
Aerospace series. Aluminium alloy AL-P8090-T89. Die forgings. a ≤ 125 mm Published By Publication Date…
-
WRC 485:2003
Suitable Heating Conditions in Local Post Weld Heat Treatment Published By Publication Date Number of…
-
SAE AMS 4288:2001
Aluminum Alloy Castings 7.0Si – 0.58Mg – 0.15Ti (E357.0-T6) Solution and Precipitation Heat Treated Published…
-
ASTM-C285 2005
C285-88(2005) Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel Published By…
-
AS/NZS 4281:2007
Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and between 30 and 41…
-
BS EN 4283:2005
Aerospace series. Aluminium alloy AL-P2219-T87. Plate. 6 mm < a ≤ 40 mm Published By…
-
ASTM-A285 2003
A285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength Published By…
-
SAE AMS 6285:2002
Steel Tubing (Seamless for Machined Parts) .55Ni .50Cr .25Mo (.38 – .43C) Heat-Treated (180,000 Tensile…
-
ASTM-D4285 2006
D4285-83(2006) Standard Test Method for Indicating Oil or Water in Compressed Air Published By Publication…
-
ASTM-E285 2002
E285-80(2002) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials Published By Publication…
-
UNE-EN 4286:2005
Aerospace series – Aluminium alloy AL-P8090-T89 – Die forgings – a <=125 mm Published By…
-
ASTM-E285 2008
E285-08 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials Published By Publication…
-
AS 4288:2003 (R2016)
Soft underlays for textile floor coverings Published By Publication Date Number of Pages AS 2003-01-08…
-
UNE-EN 4287:2005
Aerospace series – Aluminium alloy AL-P7010 – Forging stock Published By Publication Date Number of…
-
UNE-EN 4215:2005
Aerospace series – Aluminium alloy AL-P7175-T651 – Plate – 6 mm <a <=80 mm Published…
-
BS EN 2285:2017
Aerospace series. Bushes, plain, aluminium alloy, with self-lubricating liner. Dimensions and loads Published By Publication…
-
IEEE 1285-2005
IEEE Standard for Scalable Storage Interface Published By Publication Date Number of Pages IEEE 2005
-
BS ISO 5285:2004
Conveyor belts. Guidelines for storage and handling Published By Publication Date Number of Pages BSI…
-
SAE AMSQQW 428B:2017
Wire, Steel, Carbon (High Carbon, Round, for Mechanical Springs, General Purpose) Published By Publication Date…
-
SAE ARP 4205:2005
Aerospace Fluid Power – Hydraulic Filter Elements – Method for Evaluating Dynamic Efficiency with Cyclic…
-
ASTM-A285/A285M 2017(Redline)
A285/A285M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength (Redline) Published…
-
BS EN 4215:2005
Aerospace series. Aluminium alloy AL-P7175-T651. Plate. 6 mm <a ≤80 mm Published By Publication Date…
-
ASTM-A285 2001
A285/A285M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength Published By…
-
ASTM-E285 2008(Redline)
E285-08 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials (Redline) Published By…
-
SAE AIR 4985:2005
A Methodology for Quantifying the Performance of An Engine Monitoring System Published By Publication Date…
-
AS 4985:2002
Collection and stabilization of urine samples for quantitation of trace and toxic elements Published By…
-
BS EN 4185:2001
Aerospace series. Pipe coupling 8°30′ in titanium alloy. Tees, bulkhead on run long Published By…
-
BS ISO 2285:2007
Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set,…
-
IEEE 1285 2006
IEEE Standard for Scalable Storage Interface Published By Publication Date Number of Pages IEEE 2006…
-
SAE AMS 4285F:2017
Aluminum Alloy Castings, Centrifugal 7.0Si – 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated Published By…
-
FEMA 428 2003
FEMA 428 – Primer for Design Safe Schools Projects in Case of Terrorist Attacks Published…
-
UNE-EN 4185:2001
Aerospace series – Pipe coupling 8º30′ i titanium alloy – Tees bulkhead on run long.…
-
ASTM-A285/A285M 2017
A285/A285M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength Published By…
-
BS ISO 2285:2001:2002 Edition
Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set,…
-
ASTM-A285 2007
A285/A285M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength Published By…
-
BS EN 4085:2001
Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Amorphous foil Published By…
-
AS 4885:2006
Transfusion sets for single use Published By Publication Date Number of Pages AS 2006-10-04 24
-
AS/NZS 4284:2008
Testing of building facades Published By Publication Date Number of Pages AS 2008-04-28 41
-
UNE-EN 4283:2005
Aerospace series – Aluminium alloy AL-P2219-T87 – Plate – 6 mm <a <=40 mm Published…
