AS 4430.2:2004
$16.25
Evaluation of devices, additives and processes which claim to improve vehicle performance – Spark ignition engine system
| Published By | Publication Date | Number of Pages |
| AS | 2004-11-17 | 21 |
Specifies test procedures and performance requirements for evaluating claims that a device, additive or process can improve the performance of a spark ignition engine system.
Scope
This Standard specifies test procedures and performance requirements for evaluating claims that a device, additive or process can improve the performance of a spark ignition engine system.
This Standard is applicable to all M and N category spark ignition engine motor vehicles with a GVM less than or equal to 3.5 tonnes, as defined in the Australian Design Rules (ADRs).
Related products
-
ASTM-D4302 2014
D4302-14 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints Published By Publication Date Number…
-
AS 4433.3:2002
Guide to the sampling of particulate materials – Estimating sampling precision Published By Publication Date…
-
IEEE P400.2 2024
IEEE Approved Draft Guide for Field Testing of Shielded Power Cable Systems Using Very Low…
-
IEEE 400.2 2005
IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)…
-
AS/NZS 4034.2:2008
Motor vehicles – Cargo barriers for occupant protection – Partial cargo barriers Published By Publication…
-
AS/NZS 4280.2:2003
406 MHz satellite distress beacons – Personal locator beacons (PLBs) Published By Publication Date Number…
-
ACI 440.2R 08 2008
440.2R-08 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete…
-
AS 2434.2:2002 (R2013)
Methods for the analysis and testing of lower rank coal and its chars – Lower…
-
IEEE 1450.2-2002
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for DC…
-
AS 4457.2:2008
Earth-moving machinery – Off-the-road wheels, rims and tyres – Maintenance and repair – Tyres Published…
-
AS/NZS 3439.2:2002
Low-voltage switchgear and controlgear assemblies – Particular requirements for busbar trunking systems (busways) Published By…
-
ACI 440.5 08 2008
440.5-08 Specification for Construction with Fiber-Reinforced Polymer Reinforcing Bars Published By Publication Date Number of…
-
AS 4032.2:2005 (R2015)
Water supply – Valves for the control of hot water supply temperatures – Tempering valves…
-
AS 2439.2:2007
Perforated plastics drainage and effluent pipe and fittings – Perforated effluent pipe and associated fittings…
-
IEEE 1450.2 2003
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for DC…
-
AS/NZS 4456.2:2003
Masonry units and segmental pavers and flags – Methods of test – Assessment of mean…
-
AS 4030.1:2002 (R2016)
Lead sulfide concentrates – Chemical analysis – Determination of lead content – EDTA titration method…
-
AS 4180.2:2008 (R2018)
Measurement of drift loss from cooling towers – Lost chloride method Published By Publication Date…
-
AS 4435.4:2005 (R2016)
Insulators – Composite for overhead power lines – Voltages greater than 1000 V a.c. –…
-
AS 4433.6:2000
Guide to the sampling of particulate materials – Inspection of mechanical sampling systems Published By…
-
HPS N43.2-2001
Radiation Safety for X-ray Diffraction and Fluorescence Analysis Equipment Published By Publication Date Number of…
-
AS/NZS 4934.2(Int):2008
Incandescent lamps for general lighting services – Minimum Energy Performance Standards (MEPS) requirements Published By…
-
AS/NZS 4417.2:2001
Marking of electrical products to indicate compliance with regulations – Specific requirements for electrical safety…
-
AS 4433.4:2001
Guide to the sampling of particulate materials – Checking for bias Published By Publication Date…
-
AS 4538.2:2000 (R2013)
Guide to the sampling of alumina – Preparation of samples Published By Publication Date Number…
-
AS/NZS 4415.2:2003
Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands –…
-
AS/NZS 4240.2:2009
Remote control systems for mining equipment – Operation and maintenance for underground metalliferous mining Published…
-
AS 4932.2:2002
Representation of results of particle size analysis – Calculation of average particle sizes/diameters and moments…
-
AS 4430.1:2003
Evaluation of devices, additives and processes which claim to improve vehicle performance – Engines designed…
-
AS/NZS 4492.2:2000
Wool-Fleece testing and measurement – Determination of washing yield and clean fleece weight Published By…
-
AS/NZS 4474.2:2001
Performance of household electrical appliances – Refrigerating appliances – Energy labelling and minimum energy standard…
-
ISO 14302:2002
Space systems — Electromagnetic compatibility requirements Published By Publication Date Number of Pages ISO 2002-12…
-
AS 4433.5:2005
Guide to the sampling of particulate materials – Sampling of slurries Published By Publication Date…
-
ACI 440.6 08 2008
440.6-08 Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement Published By…
-
AS 4418.2:2000 (R2016)
Supervisory control and data acquisition (SCADA) – Generic telecommunications and interface protocol – Fire alarm…
-
AS 4700.2:2004
Implementation of Health Level Seven (HL7) Version 2.3.1 – Pathology orders and results Published By…
-
ASTM-D4302 2005
D4302-05 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints Published By Publication Date Number…
-
ASTM-D4302 2014(Redline)
D4302-14 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints (Redline) Published By Publication Date…
-
AS 4700.2:2007
Implementation of Health Level Seven (HL7) Version 2.4 – Pathology and medical imaging (diagnostics) Published…
-
AS 3730.2:2006 (R2016)
Guide to the properties of paints for buildings – Latex – Interior – Semi-gloss Published…
