AS 4433.6:2000
$33.80
Guide to the sampling of particulate materials – Inspection of mechanical sampling systems
| Published By | Publication Date | Number of Pages |
| AS | 2000-12-27 | 25 |
Sets out recommended practices for the inspection of mechanical sampling systems, covering general considerations including precision, mineral variability and bias.
Scope
This Guide sets out recommended practices for the inspection of mechanical sampling systems. This Guide serves as a reference for conformance with applicable Australian Standards.
This Guide covers general considerations including precision, mineral variability and bias; establishment of inspection systems and inspection procedure.
Related products
-
ACI 440.6 2008 RA2017 RA2022 SI
ACI SPEC-440.6-08(17)(22) Specification for Carbon Fiber-Reinforced Polymer Bar Material for Concrete Reinforcement (Reapproved 2022) Published…
-
BS EN 13399:2010
Bitumen and bituminous binders. Determination of storage stability of modified bitumen Published By Publication Date…
-
AS 4133.5:2002 (R2013)
Methods of testing rocks for engineering purposes – Sampling of rock core Published By Publication…
-
AS 4430.2:2004
Evaluation of devices, additives and processes which claim to improve vehicle performance – Spark ignition…
-
AS 4433.4:2001
Guide to the sampling of particulate materials – Checking for bias Published By Publication Date…
-
BS EN 14336:2004:2013 Edition
Heating systems in buildings. Installation and commissioning of water based heating systems Published By Publication…
-
BS 5449:1990:2002 Edition
Specification for forced circulation hot water central heating systems for domestic premises Published By Publication…
-
ASME BPVC III 1 NF 2023
ASME BPVC.III.1.NF-2023 Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NF,…
-
ASME NOG 1 2020
ASME NOG-1 – 2020 Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge,…
-
BS ISO 24336:2005
Laminate floor coverings. Determination of thickness swelling after partial immersion in water Published By Publication…
-
AS/NZS 4456.6:2003
Masonry units and segmental pavers and flags – Methods of test – Determining potential to…
-
ACI 440.6 2008 2017 2022
ACI SPEC-440.6-08(17)(22) Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement (Reapproved…
-
BS ISO 7240-15:2004:2006 Edition
Fire detection and alarm systems – Point type fire detectors using scattered light, transmitted light…
-
ASTM-D4336 2001
D4336-01 Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump…
-
AS 4123.6:2006
Mobile waste containers – Health, safety and environment Published By Publication Date Number of Pages…
-
BS 5266-10:2008
Guide to the design and provision of emergency lighting to reduce the risks from hazards…
-
ASME BPVC III 1 NF 2010
ASME BPVC – III – 1 – NF -2010 BPVC Section III, Rules for Construction…
-
AS 4433.3:2002
Guide to the sampling of particulate materials – Estimating sampling precision Published By Publication Date…
-
ACI 440.6 2008 R2017 R2022 SI
ACI SPEC-440.6-08(17)(22) Specification for Carbon Fiber-Reinforced Polymer Bar Material for Concrete Reinforcement (Reapproved 2022) Published…
-
AS 4430.1:2003
Evaluation of devices, additives and processes which claim to improve vehicle performance – Engines designed…
-
BS EN 4336:2002
Aerospace series. Steel FE-WA3801 (X4CrNiMn20-10-2). Filler metal for welding. Wire and rod Published By Publication…
-
BS EN 60384-1:2016
Fixed capacitors for use in electronic equipment – Generic specification Published By Publication Date Number…
-
HPS N43.6-2007 (R2013)
Sealed Radioactive Sources – Classification Published By Publication Date Number of Pages HPS 2007 24
-
ACI 440.6 08 RA 2022 2008
ACI SPEC-440.6-08(17)(22) Specification for Carbon Fiber-Reinforced Polymer Bar Material for Concrete Reinforcement (Reapproved 2022) Published…
-
ASTM-C695 2000
C695-91(2000) Standard Test Method for Compressive Strength of Carbon and Graphite Published By Publication Date…
-
AS 4435.4:2005 (R2016)
Insulators – Composite for overhead power lines – Voltages greater than 1000 V a.c. –…
-
ASTM-D4336 2005
D4336-05 Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump…
-
BS EN 62356-3:2004 2005
Video recording. 12,65 mm type D-11 format – Data mapping over SDTI Published By Publication…
-
BS EN 61937-4:2003:2004 Edition
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Non-linear PCM…
-
BS EN 62208:2003 2004
Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements Published By Publication Date Number…
-
AS 4433.5:2005
Guide to the sampling of particulate materials – Sampling of slurries Published By Publication Date…
-
ASTM-D4336 2010
D4336-05(2010) Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump…
-
ACI 440.6 08 2008
440.6-08 Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement Published By…
-
IEEE 45.2 2011
IEEE Recommended Practice for Electrical Installations on Shipboard — Controls and Automation Published By Publication…
-
AS 2434.6:2002 (R2013)
Methods for the analysis and testing of lower rank coal and its chars – Lower…
-
AS 1473.6:2005
Wood processing machinery – Safety – Finishing machinery – Surface planing and thicknessing machines Published…
-
ISO 24336:2005
Laminate floor coverings — Determination of thickness swelling after partial immersion in water Published By…
-
UNE-EN 4336:2002
Aerospace series- Steel FE-WA3801 (X4CrNiMn20-10-2)- Filler metal for welding- Wire and rod. Published By Publication…
-
AS 4693.6:2004
Surfaces for sports areas – Methods of test – Determination of resistance to staining Published…
-
ASHRAE StructuralandVibrationGuidelinesforDatacomEquipmentCenters 08 2008
Structural and Vibration Guidelines for Datacom Equipment Centers Published By Publication Date Number of Pages…
