AS 4882:2003
$27.30
Shielding gases for welding
| Published By | Publication Date | Number of Pages |
| AS | 2003-09-05 | 17 |
Describes a system of classification of shielding gases for welding.
Scope
This Standard specifies the requirements for shielding gases and the tolerances on the nominal value of constituent gases in mixtures. This Standard applies, but is not limited, to the following processes:
(a) Gas tungsten arc welding (GTAW).
(b) Gas metal arc welding (GMAW).
(c) Flux cored arc welding (FCAW).
(d) Plasma arc welding (PAW).
NOTES:
1 For further information on shielding gases for GTAW and GMAW refer to Appendix A.
2 For information on safety in the use of shielding gases, see Appendix B.
Related products
-
ASTM-D4882 2005
D4882-05 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test…
-
AS 4862:2000 (R2016)
Lead and lead alloys – Determination of impurities and alloying elements – Atomic emission spectrometric…
-
BS 4482:2005 2007
Steel wire for the reinforcement of concrete products. Specification Published By Publication Date Number of…
-
AS 1882:2002 (R2020)
Earth and bonding clamps Published By Publication Date Number of Pages AS 2002-07-18 21
-
ASTM-D882 2000
D882-00 Standard Test Method for Tensile Properties of Thin Plastic Sheeting Published By Publication Date…
-
BS EN 4882:2022 2023
Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Sheets and…
-
ASTM-B882 2005
B882-05 Specification for Pre-Patinated Copper for Architectural Applications Published By Publication Date Number of Pages…
-
ASTM-D4882 2001
D4882-01 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test…
-
AS/NZS 4812:2003
Non-destructive examination and discard criteria for wire ropes in mine winding systems Published By Publication…
-
ASTM-C882 2005
C882-05 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant…
-
ASTM-B882 2000
B882-00 Specification for Pre-Patinated Copper for Architectural Applications Published By Publication Date Number of Pages…
-
AS 4832:2007 (R2017)
Cathodic protection – Installation of galvanic sacrificial anodes in soil Published By Publication Date Number…
-
AS 4885:2006
Transfusion sets for single use Published By Publication Date Number of Pages AS 2006-10-04 24
-
AS 4884:2008
Method of test for determination of histamine levels in fish and fish products/seafoods by fluorometric…
-
ASTM-A882 2004
A882/A882M-04a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand Published By Publication Date Number…
-
BS EN 4382:2006 2007
Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D…
-
ASTM-C882 2005
C882/C882M-05e1 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant…
-
AS/NZS 4886:2007
Domestic solid fuel burning appliance – Pellet heaters – Determination of flue gas emission Published…
-
ICAO 9882:2008
Manual on Air Traffic Management System Requirements Published By Publication Date Number of Pages ICAO…
-
BS 7882:2008
Method for calibration and classification of torque measuring devices Published By Publication Date Number of…
-
ASTM-D882 2001
D882-01 Standard Test Method for Tensile Properties of Thin Plastic Sheeting Published By Publication Date…
-
ASTM-C882 2013
C882/C882M-13 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant…
-
ASTM-E882 2003
E882-87(2003) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory Published By…
-
SAE AS 4882A:2003
Clamp, Loop, Cushioned, Hinged, Quick Release – Cable or Wire Published By Publication Date Number…
-
AS 4982:2003 (R2016)
Thermal performance of refrigerated transport equipment – Specification and testing Published By Publication Date Number…
-
ASTM-C882 2013(Redline)
C882/C882M-13 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant…
-
ASTM-D882 2009
D882-09 Standard Test Method for Tensile Properties of Thin Plastic Sheeting Published By Publication Date…
-
ISO 4892-4:2013
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps…
-
TR 4887:2008
Call centre standards scoping study Published By Publication Date Number of Pages AS 2008-02-19 36
-
WRC 488:2004
Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry Published By Publication Date…
-
WRC 482:2003
Special Finite Elements for Piping Elbows and Bends at High Temperatures with Creep Published By…
-
ISO 4892-4:2004
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps…
-
ASTM-D882 2002
D882-02 Standard Test Method for Tensile Properties of Thin Plastic Sheeting Published By Publication Date…
-
ISO 3882:2003
Revêtements métalliques et autres revêtements inorganiques — Vue d’ensemble sur les méthodes de mesurage de…
-
ISO 4832:2006
Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coliforms…
-
BS 3882:2007
Specification for topsoil and requirements for use Published By Publication Date Number of Pages BSI…
-
ISO 4582:2007
Plastics — Determination of changes in colour and variations in properties after exposure to daylight…
-
BS ISO 4832:2006 2009
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coliforms. Colony-count…
-
ASTM-F882 2002
F882-84(2002) Standard Performance and Safety Specification for Cryosurgical Medical Instruments (Withdrawn 2011) Published By Publication…
-
ASTM-D4882 2005(Redline)
D4882-05 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test…
