🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME A112.19.8 07:2007 Edition

ASME A112.19.8 07:2007 Edition

$75.42

ASME A112.19.8 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs

Published By Publication Date Number of Pages
ASME 2007 30
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

PDF Catalog

PDF Pages PDF Title
4 CONTENTS
CONTENTS
FIGURES
FIGURES
MANDATORY APPENDICES
MANDATORY APPENDICES
5 FOREWORD
FOREWORD
6 COMMITTEE ROSTER
COMMITTEE ROSTER
7 CORRESPONDENCE WITH THE A112 COMMITTEE
CORRESPONDENCE WITH THE A112 COMMITTEE
8 1 GENERAL
1 GENERAL
1.1 Scope
1.1 Scope
1.1.1 General Requirements.
1.1.1 General Requirements.
1.1.2 Definition.
1.1.2 Definition.
1.1.3 Compliance.
1.1.3 Compliance.
1.1.4 Revisions.
1.1.4 Revisions.
1.1.5 Exclusions
1.1.5 Exclusions
1.1.5.1
1.1.5.1
1.1.5.2
1.1.5.2
1.1.6 Types of Suction Fittings
1.1.6 Types of Suction Fittings
1.1.6.1 General.
1.1.6.1 General.
1.1.6.2 Field Fabricated Outlets.
1.1.6.2 Field Fabricated Outlets.
1.1.6.3 Venturi Outlets.
1.1.6.3 Venturi Outlets.
1.1.6.4 Swim Jet Combination Fittings.
1.1.6.4 Swim Jet Combination Fittings.
1.1.6.5 Submerged Suction Outlets.
1.1.6.5 Submerged Suction Outlets.
1.1.7 Single or Multiple Usage
1.1.7 Single or Multiple Usage
1.1.7.1
1.1.7.1
1.1.7.2
1.1.7.2
1.2 Related Standards
1.2 Related Standards
1.3 Units of Measurement
1.3 Units of Measurement
1.4 References
1.4 References
9 1.5 Definitions
1.5 Definitions
1 Finger Probe “Edge”
1 Finger Probe “Edge”
10 2 FITTING DESIGN, ASSEMBLY, AND MATERIAL REQUIREMENTS
2 FITTING DESIGN, ASSEMBLY, AND MATERIAL REQUIREMENTS
2.1 General Requirements
2.1 General Requirements
2.1.1
2.1.1
2.1.1.1
2.1.1.1
2.1.1.2
2.1.1.2
2.1.1.3
2.1.1.3
2.1.1.4
2.1.1.4
2.1.1.5
2.1.1.5
2.1.1.6
2.1.1.6
2.1.2
2.1.2
11 2.1.3
2.1.3
2.1.4
2.1.4
2.2 Fitting Exposure
2.2 Fitting Exposure
2.3 Specific Design Requirements
2.3 Specific Design Requirements
2.3.1 Field Fabricated Outlets.
2.3.1 Field Fabricated Outlets.
2.3.1.1 Suction Outlet Cover/Grates.
2.3.1.1 Suction Outlet Cover/Grates.
2.3.1.2 Entrapping Force Criterion for Q
2.3.1.2 Entrapping Force Criterion for Q
2.3.1.3 Maximum Rating, ft3/sec.
2.3.1.3 Maximum Rating, ft3/sec.
2.3.1.4 Maximum Rating, gal/min.
2.3.1.4 Maximum Rating, gal/min.
2.3.1.5 Alternate Test.
2.3.1.5 Alternate Test.
2.3.1.6 Sump.
2.3.1.6 Sump.
2.3.1.7 Design.
2.3.1.7 Design.
2.3.2 Venturi Outlets.
2.3.2 Venturi Outlets.
2.3.3 Swim Jet Combination Fittings.
2.3.3 Swim Jet Combination Fittings.
2.3.4 Submerged Suction Outlets.
2.3.4 Submerged Suction Outlets.
12 3 PHYSICAL TESTING
3 PHYSICAL TESTING
3.1 General
3.1 General
3.1.1 Certification.
3.1.1 Certification.
3.1.2 Conditions for Tests and Evaluation.
3.1.2 Conditions for Tests and Evaluation.
3.1.3 Test Procedure.
3.1.3 Test Procedure.
3.1.4 Test Fixture.
3.1.4 Test Fixture.
3.1.5 Conditioning.
3.1.5 Conditioning.
3.1.6 Crack Detection.
3.1.6 Crack Detection.
3.1.6.1 Inking Procedure.
3.1.6.1 Inking Procedure.
3.1.6.2 Method of Inspection of the Fitting Surface.
3.1.6.2 Method of Inspection of the Fitting Surface.
3.1.7 Performance Requirement.
3.1.7 Performance Requirement.
3.2 Ultraviolet Light Exposure Test
3.2 Ultraviolet Light Exposure Test
2 Field Built Sump
2 Field Built Sump
13 3.2.1 Test Method.
3.2.1 Test Method.
3.2.2 Performance Requirement.
3.2.2 Performance Requirement.
3.3 Vertical Load and Deformation Test
3.3 Vertical Load and Deformation Test
3.3.1 Test Method.
3.3.1 Test Method.
3.3.2 Performance Requirement.
3.3.2 Performance Requirement.
3.4 Horizontal Load and Deformation Test
3.4 Horizontal Load and Deformation Test
3.5 Point Load to Excess Test
3.5 Point Load to Excess Test
3.5.1 Test Method.
3.5.1 Test Method.
3.5.2 Performance Requirement.
3.5.2 Performance Requirement.
3.6 Shear Load Test
3.6 Shear Load Test
3.6.1 Test Method.
3.6.1 Test Method.
3.6.2 Performance Requirement.
3.6.2 Performance Requirement.
3.7 Vacuum and Point Impact Test
3.7 Vacuum and Point Impact Test
3.7.1 Test Method
3.7.1 Test Method
14 3.7.2 Performance Requirement.
3.7.2 Performance Requirement.
3.8 Pull Load Test
3.8 Pull Load Test
3.8.1 Test Method.
3.8.1 Test Method.
3.8.2 Performance Requirement.
3.8.2 Performance Requirement.
4 HAIR ENTRAPMENT
4 HAIR ENTRAPMENT
4.1 General
4.1 General
4.1.1 Impedance.
4.1.1 Impedance.
4.1.2 Sample Types.
4.1.2 Sample Types.
4.1.2.1 Type 1.
4.1.2.1 Type 1.
4.1.2.2 Type 2.
4.1.2.2 Type 2.
4.1.3 Suction Fitting.
4.1.3 Suction Fitting.
4.1.4 Field Fabricated Outlets.
4.1.4 Field Fabricated Outlets.
4.1.5 Test Equipment
4.1.5 Test Equipment
4.1.5.1 Test Tank.
4.1.5.1 Test Tank.
4.1.5.2 Pump.
4.1.5.2 Pump.
4.1.5.3 Pump Inlet.
4.1.5.3 Pump Inlet.
4.1.5.4 Scale.
4.1.5.4 Scale.
4.1.5.5 Test Fixture.
4.1.5.5 Test Fixture.
4.1.5.6 Mounting Surface.
4.1.5.6 Mounting Surface.
15 3 Test Tank Pull Mechanism
3 Test Tank Pull Mechanism
4 Test Tank Side View
4 Test Tank Side View
16 4.1.5.7 Test Procedure.
4.1.5.7 Test Procedure.
4.1.6 Alternate Test Tank
4.1.6 Alternate Test Tank
4.1.6.1 Depth of Tank.
4.1.6.1 Depth of Tank.
4.1.6.2 Water Volume.
4.1.6.2 Water Volume.
4.1.6.3 Alternate Test Pool.
4.1.6.3 Alternate Test Pool.
4.1.6.4 Water Currents.
4.1.6.4 Water Currents.
4.2 Test Method
4.2 Test Method
4.2.1
4.2.1
4.2.2
4.2.2
4.2.3
4.2.3
5 Test Tank Top View
5 Test Tank Top View
17 6 Test Tank Mounting Plate
6 Test Tank Mounting Plate
7 Test Tank Baffles
7 Test Tank Baffles
18 4.2.4
4.2.4
4.2.5
4.2.5
4.2.6
4.2.6
4.2.7
4.2.7
4.2.7.1
4.2.7.1
4.2.7.2
4.2.7.2
4.2.8
4.2.8
4.2.8.1
4.2.8.1
8 Anticlastic Mounting Surface (Typical)
8 Anticlastic Mounting Surface (Typical)
19 4.2.8.2
4.2.8.2
4.3 Performance Requirement
4.3 Performance Requirement
5 BODY ENTRAPMENT
5 BODY ENTRAPMENT
5.1 General
5.1 General
5.1.1 Design and Installation.
5.1.1 Design and Installation.
5.1.2 Fittings
5.1.2 Fittings
5.1.2.1
5.1.2.1
5.1.2.2
5.1.2.2
5.1.3 Test Equipment.
5.1.3 Test Equipment.
9 Hair Test Diagrams
9 Hair Test Diagrams
20 5.2 Test Method
5.2 Test Method
5.2.1
5.2.1
5.2.1.1
5.2.1.1
5.2.1.2
5.2.1.2
5.2.2
5.2.2
5.3 Performance Requirement
5.3 Performance Requirement
5.3.1
5.3.1
10 Body Block Element
10 Body Block Element
11 Body Block Element Dimensions
11 Body Block Element Dimensions
21 5.3.2
5.3.2
6 FINGER AND LIMB ENTRAPMENT
6 FINGER AND LIMB ENTRAPMENT
6.1 General
6.1 General
6.1.1 Design and Installation.
6.1.1 Design and Installation.
6.1.1.1
6.1.1.1
6.1.2 Small Aperture.
6.1.2 Small Aperture.
6.1.3 Large Aperture.
6.1.3 Large Aperture.
6.1.4 Suction Outlet Testing
6.1.4 Suction Outlet Testing
6.1.4.1
6.1.4.1
6.1.4.2
6.1.4.2
6.1.5 Conditions for Tests.
6.1.5 Conditions for Tests.
6.1.6 Conditions Using UL Articulate Probe.
6.1.6 Conditions Using UL Articulate Probe.
6.2 Test Method
6.2 Test Method
6.3 Performance Requirement
6.3 Performance Requirement
TABLE
TABLE
1 Applicable Body Block Element — Calculation of Removal Force
1 Applicable Body Block Element — Calculation of Removal Force
22 12 Finger Probe — Finger and Limb Entrapment Test
12 Finger Probe — Finger and Limb Entrapment Test
13 Finger Probe
13 Finger Probe
23 14 Finger Probe Dimensions
14 Finger Probe Dimensions
15 Finger Probe Knuckle Dimensions
15 Finger Probe Knuckle Dimensions
24 7 PACKAGING AND INSTALLATION INSTRUCTIONS
7 PACKAGING AND INSTALLATION INSTRUCTIONS
7.1 Marking of Suction Fittings
7.1 Marking of Suction Fittings
7.1.1
7.1.1
7.1.2
7.1.2
7.2 Packaging of Suction Fittings
7.2 Packaging of Suction Fittings
7.2.1
7.2.1
26 I TORSO SPECIMEN WITH RECTANGLE SUPERPOSED
I TORSO SPECIMEN WITH RECTANGLE SUPERPOSED
27 II FITTING TYPE REQUIREMENTS
II FITTING TYPE REQUIREMENTS
28 NONMANDATORY APPENDIX
NONMANDATORY APPENDIX
A SUCTION FITTING TEST FORM — HAIR ENTRAPMENT
A SUCTION FITTING TEST FORM — HAIR ENTRAPMENT

Related products

ASME A112.19.8 07
$75.42