Name: ASME A17.1 2016 w ERRATA 0121 PDF - PDF Standards Store
Price: 98.04 USD
Availability: InStock

The ASME A17.1 / CSA B44 Safety Code for Elevators and Escalators has become the accepted guide throughout North America for the design, construction, installation, operation, inspection, testing, maintenance, alteration, and repair of elevators, escalators and related conveyances.

PDF Catalog

PDF Pages	PDF Title
2	Errata to ASME A17.1-2013/CSA B44-13 and ASME A17.1-2016/CSA B44-16 Safety Code for Elevators and Escalators
5	CONTENTS
7	Figures
8	Tables
10	ASME FOREWORD
15	ASME A17 COMMITTEE ROSTER STANDARDS COMMITTEE Honorary Members Regulatory Advisory Council
16	NATIONAL INTEREST REVIEW GROUP B44.1/A17.5 ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT COMMITTEE CODE COORDINATION COMMITTEE DUMBWAITER AND ATD COMMITTEE EARTHQUAKE SAFETY COMMITTEE EDITORIAL COMMITTEE ELECTRICAL COMMITTEE ELEVATORS USED FOR CONSTRUCTION COMMITTEE
17	EMERGENCY OPERATIONS COMMITTEE EMERGENCY PERSONNEL COMMITTEE ESCALATOR AND MOVING WALK COMMITTEE EXISTING INSTALLATIONS COMMITTEE HAND AND SIDEWALK ELEVATOR COMMITTEE
18	HOISTWAY COMMITTEE HYDRAULIC COMMITTEE INCLINED ELEVATOR COMMITTEE INSPECTIONS COMMITTEE INTERNATIONAL STANDARDS COMMITTEE
19	LIMITED-USE/LIMITED-APPLICATION ELEVATOR COMMITTEE MAINTENANCE, REPAIR, AND REPLACEMENT COMMITTEE MARINE ELEVATOR COMMITTEE MECHANICAL DESIGN COMMITTEE MINE ELEVATOR COMMITTEE NEW TECHNOLOGY COMMITTEE
20	OUTSIDE EMERGENCY ELEVATOR COMMITTEE QUALIFICATION OF ELEVATOR INSPECTORS QEI COMMITTEE RACK-AND-PINION AND SPECIAL PURPOSE PERSONNEL ELEVATOR COMMITTEE RESIDENCE ELEVATOR COMMITTEE WIND TURBINE ELEVATOR COMMITTEE
21	CSA B44 COMMITTEE ON THE ELEVATOR SAFETY CODE TECHNICAL COMMITTEE Associate Members CSA B44.1/ASME A17.5 JOINT COMMITTEE ON ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT
23	ASME PREFACE GENERAL APPLICATION OF REQUIREMENTS TO NEW TECHNOLOGY FORM AND ARRANGEMENT METRIC SI UNITS ASME ELEVATOR PUBLICATIONS
24	CORRESPONDENCE WITH A17 COMMITTEE
26	CSA PREFACE
27	SUMMARY OF CHANGES
37	SAFETY CODE FOR ELEVATORS AND ESCALATORS Part 1 General SECTION 1.1 SCOPE
38	SECTION 1.2 PURPOSE AND EXCEPTIONS SECTION 1.3 DEFINITIONS
55	Part 2 Electric Elevators SCOPE SECTION 2.1 CONSTRUCTION OF HOISTWAYS AND HOISTWAY ENCLOSURES
57	SECTION 2.2 PITS
59	SECTION 2.3 LOCATION AND GUARDING OF COUNTERWElGHTS
60	SECTION 2.4 VERTICAL CLEARANCES AND RUNBYS FOR CARS AND COUNTERWEIGHTS
61	Table 2.4.2.2 Minimum Bottom Run by for Counterweight Elevators With Spring Buffers, Elastomeric Buffers, or Solid Bumpers and Rheostatic Control or Single-Speed AC Control
62	SECTION 2.5 HORIZONTAL CAR AND COUNTERWEIGHT CLEARANCES
63	SECTION 2.6 PROTECTION OF SPACE BELOW HOlSTWAYS SECTION 2.7 MACHINERY SPACES, MACHINE ROOMS, CONTROL SPACES, AND CONTROL ROOMS
71	SECTION 2.8 EQUIPMENT IN HOISTWAYS, MACHINERY SPACES, MACHINE ROOMS, CONTROL SPACES, AND CONTROL ROOMS
73	SECTION 2.9 MACHINERY AND SHEAVE BEAMS, SUPPORTS, AND FOUNDATIONS
75	SECTION 2.10 GUARDING OF EQUIPMENT AND STANDARD RAILING SECTION 2.11 PROTECTION OF HOISTWAY OPENINGS
83	SECTION 2.12 HOISTWAY DOOR LOCKING DEVICES AND ELECTRIC CONTACTS, AND HOISTWAY ACCESS SWITCHES
88	SECTION 2.13 POWER OPERATION OF HOISTWAY DOORS AND CAR DOORS
93	SECTION 2.14 CAR ENCLOSURES, CAR DOORS AND GATES, AND CAR ILLUMINATION
103	SECTION 2.15 CAR FRAMES AND PLATFORMS
106	SECTION 2.16 CAPACITY AND LOADING Table 2.15.10.1 Maximum Allowable Stresses in Car Frame and Platform Members and Connections, for Steels Specified in 2.15.6.2.1 and 2.15.6.2.2
107	Fig. 2.16.1.1 Inside Net Platform Areas for Passenger Elevators Table 2.16.1.1 Maximum Inside Net Platform Areas for the Various Rated Loads
111	SECTION 2.17 CAR AND COUNTERWEIGHT SAFETIES
112	Table 2.17.3 Maximum and Minimum Stopping Distances for Type B Car Safeties With Rated Load and Type B Counterweight Safeties
114	SECTION 2.18 SPEED GOVERNORS
115	Table 2.18.2.1 Maximum Car Speeds at Which Speed Governor Trips and Governor Overspeed Switch Operates
117	SECTION 2.19 ASCENDING CAR OVERSPEED AND UNINTENDED CAR MOVEMENT PROTECTION Table 2.18.7.4 Multiplier for Determining Governor Sheave Pitch Diameter
119	SECTION 2.20 SUSPENSION MEANS AND THEIR CONNECTIONS
120	Table 2.20.3 Minimum Factors of Safety for Suspension Members
124	Fig. 2.20.9.4 Tapered Rope Sockets Fig. 2.20.9.5 Wedge Rope Sockets Table 2.20.9.4.5 Relation of Rope Diameter to Diameter of the Small Socket Hole
128	SECTION 2.21 COUNTERWEIGHTS
129	SECTION 2.22 BUFFERS AND BUMPERS Table 2.22.3.1 Minimum Spring Buffer Strokes
131	Table 2.22.4.1 Minimum Oil Buffer Strokes
132	SECTION 2.23 CAR AND COUNTERWEIGHT GUIDE RAILS, GUIDEÃRAIL SUPPORTS, AND FASTENINGS
133	Fig. 2.23.3 Elevator Guide Rails Table 2.23.3 T-Section Guide-Rail Dimensions
135	Fig. 2.23.4.1-1 Maximum Weight of a Car With Rated Load or of Counterweight With Safety Device for a Pair of Guide Rails as Specified in 2.23.4.1
136	Fig. 2.23.4.1-2 Minimum Moment of Inertia About x-x Axis for a Single Guide Rail With Its Reinforcement
140	Table 2.23.4.3.1 Guide Rails for Counterweight Without Safeties Table 2.23.4.3.3 Intermediate Tie Brackets
141	SECTION 2.24 DRIVING MACHINES AND SHEAVES Table 2.23.7.2.1 Minimum Thickness of Fishplates and Minimum Diameter of Fastening Bolts Table 2.23.10.2 Minimum Size of Rail-Fastening Bolts
144	SECTION 2.25 TERMINAL STOPPING DEVICES
148	SECTION 2.26 OPERATING DEVICES AND CONTROL EQUIPMENT
155	Table 2.26.4.3.2 SIL for Electrical Protective Devices and Other Electrical Safety Functions
159	SECTION 2.27 EMERGENCY OPERATION AND SIGNALING DEVICES
160	Table 2.26.12.1 Symbol Identification
165	Fig. 2.27.3.1.6(h) Visual Signal
168	Fig. 2.27.3.3.7 Panel Layout
171	Fig. 2.27.7.1 Phase I Emergency Recall Operation Instructions
172	Fig. 2.27.7.2 Phase II Emergency In-Car Operation
173	Fig. 2.27.8 FEO-K1 Key
174	Fig. 2.27.9 Elevator Corridor Call Station Pictograph
176	SECTION 2.28 LAYOUT DRAWINGS SECTION 2.29 IDENTIFICATION
177	SECTION 2.30 SWAY CONTROL GUIDES
178	Part 3 Hydraulic Elevators SCOPE SECTION 3.1 CONSTRUCTION OF HOISTWAYS AND HOISTWAY ENCLOSURES SECTION 3.2 PITS SECTION 3.3 LOCATION AND GUARDING OF COUNTERWEIGHTS SECTION 3.4 BOTTOM AND TOP CLEARANCES AND RUNBYS FOR CARS AND COUNTERWEIGHTS
179	SECTION 3.5 HORIZONTAL CAR AND COUNTERWEIGHT CLEARANCES SECTION 3.6 PROTECTION OF SPACES BELOW HOISTWAY
180	SECTION 3.7 MACHINERY SPACES, MACHINE ROOMS, CONTROL SPACES, AND CONTROL ROOMS SECTION 3.8 ELECTRICAL EQUIPMENT, WIRING, PIPES, AND DUCTS IN HOISTWAY, MACHINERY SPACES, MACHINE ROOMS, CONTROL SPACES, AND CONTROL ROOMS SECTION 3.9 MACHINERY AND SHEAVE BEAMS, SUPPORTS, AND FOUNDATIONS
181	SECTION 3.10 GUARDING OF EXPOSED AUXILIARY EQUIPMENT SECTION 3.11 PROTECTION OF HOISTWAY LANDING OPENINGS SECTION 3.12 HOISTWAY DOOR LOCKING DEVICES, ELECTRIC CONTACTS, AND HOISTWAY ACCESS SWITCHES SECTION 3.13 POWER OPERATION, POWER OPENING, AND POWER CLOSING OF HOISTWAY DOORS AND CAR DOORS OR GATES SECTION 3.14 CAR ENCLOSURES, CAR DOORS AND GATES, AND CAR ILLUMINATION SECTION 3.15 CAR FRAMES AND PLATFORMS
182	SECTION 3.16 CAPACITY AND LOADING SECTION 3.17 CAR SAFETIES, COUNTERWEIGHT SAFETIES, PLUNGER GRIPPER, AND GOVERNORS
184	SECTION 3.18 HYDRAULIC JACKS
186	SECTION 3.19 VALVES, PRESSURE PIPING, AND FITTINGS
189	SECTION 3.20 ROPES AND ROPE CONNECTIONS SECTION 3.21 COUNTERWEIGHTS SECTION 3.22 BUFFERS AND BUMPERS
190	SECTION 3.23 GUIDE RAILS, GUIDE-RAIL SUPPORTS, AND FASTENINGS SECTION 3.24 HYDRAULIC MACHINES AND TANKS SECTION 3.25 TERMINAL STOPPING DEVICES
192	SECTION 3.26 OPERATING DEVICES AND CONTROL EQUIPMENT
194	SECTION 3.27 EMERGENCY OPERATION AND SIGNALING DEVICES
195	SECTION 3.28 LAYOUT DATA SECTION 3.29 IDENTIFICATION
196	Part 4 Elevators With Other Types of Driving Machines SCOPE SECTION 4.1 RACK-AND-PINION ELEVATORS
200	Table 4.1.18.1 Maximum and Minimum Stopping Distances for Rack-and-Pinion Safeties With Rated Load
203	SECTION 4.2 SCREW-COLUMN ELEVATORS
206	SECTION 4.3 HAND ELEVATORS
210	Part 5 Special Application Elevators SCOPE SECTION 5.1 INCLINED ELEVATORS
214	Table 5.1.14.2 Minimum and Maximum Stopping Distances at Given Angles From Horizontal Table 5.1.17.2 Spring Buffer Stroke
215	Fig. 5.1.17.3 Vertical and Horizontal Components of Velocity Table 5.1.17.4.4 Minimum Oil Buffer Strokes at Given Angle From Horizontal
216	SECTION 5.2 LIMITED-USE/LIMITED-APPLICATION ELEVATORS
230	SECTION 5.4 PRIVATE RESIDENCE INCLINED ELEVATORS
233	SECTION 5.5 POWER SIDEWALK ELEVATORS
237	SECTION 5.6 ROOFTOP ELEVATORS
240	SECTION 5.7 SPECIAL PURPOSE PERSONNEL ELEVATORS
248	SECTION 5.9 MINE ELEVATORS
252	SECTION 5.10 ELEVATORS USED FOR CONSTRUCTION
256	SECTION 5.11 WIND TURBINE TOWER ELEVATORS SECTION 5.12 OUTSIDE EMERGENCY ELEVATORS
258	Part 6 Escalators and Moving Walks SCOPE SECTION 6.1 ESCALATORS
260	Fig. 6.1.3.3.10 Dimensions
269	Fig. 6.1.6.9.1 Caution Sign
271	SECTION 6.2 MOVING WALKS
274	Table 6.2.3.7 Treadway Width
276	Table 6.2.4 Treadway Speed
282	Part 7 Dumbwaiters and Material Lifts SCOPE SECTION 7.1 POWER AND HAND DUMBWAITERS WITHOUT AUTOMATIC TRANSFER DEVICES
287	SECTION 7.2 ELECTRIC AND HAND DUMBWAITERS WITHOUT AUTOMATIC TRANSFER DEVICES
290	Table 7.2.6.4 Factors of Safety for Wire Rope andChains Table 7.2.8.1 Minimum Spring Buffer Strokes
291	Table 7.2.8.2 Minimum Oil Buffer Strokes
293	SECTION 7.3 HYDRAULIC DUMBWAITERS WITHOUT AUTOMATIC TRANSFER DEVICES
294	SECTION 7.4 MATERIAL LIFTS WITHOUT AUTOMATIC TRANSFER DEVICES
295	Table 7.4.3 Type B Material Lifts
298	SECTION 7.5 ELECTRIC MATERIAL LIFTS WITHOUT AUTOMATIC TRANSFER DEVICES
304	SECTION 7.6 HYDRAULIC MATERIAL LIFTS WITHOUT AUTOMATIC TRANSFER DEVICES
305	SECTION 7.7 AUTOMATIC TRANSFER DEVICES
306	SECTION 7.8 POWER DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES SECTION 7.9 ELECTRIC MATERIAL LIFTS WITH AUTOMATIC TRANSFER DEVICES
307	Table 7.9.2.14 Minimum Spring Buffer Strokes
308	SECTION 7.10 HYDRAULIC MATERIAL LIFTS WITH AUTOMATIC TRANSFER DEVICES Table 7.9.2.15 Minimum Oil Buffer Strokes
309	Part 8 General Requirements SCOPE SECTION 8.1 SECURITY
310	SECTION 8.2 DESIGN DATA AND FORMULAS
311	Fig. 8.2.1.2 Minimum Rated Load for Passenger Elevators
314	Fig. 8.2.2.5.1 Turning Moment Based on Class of Loading
316	Fig. 8.2.4 Gravity Stopping Distances
317	Fig. 8.2.5 Maximum Governor Tripping Speeds
319	Fig. 8.2.6 Stopping Distances for Type B Car and Counterweight Safeties
322	Fig. 8.2.7 Minimum Factors of Safety of Suspension Members of Power Passenger and Freight Elevators
324	Fig. 8.2.8.1.1 Allowable Gross Loads
328	Fig. 8.2.9.1.3 Load Distribution
329	SECTION 8.3 ENGINEERING TESTS, TYPE TESTS, AND CERTIFICATION
340	SECTION 8.4 ELEVATOR SEISMIC REQUIREMENTS
341	Fig. 8.4.3.1.3 Arc of Contact
344	Fig. 8.4.8.2-1 12 kg/m (8 lb/ft) Guide-Rail Bracket Spacing
345	Fig. 8.4.8.2-2 16.5 kg/m (11 lb/ft) Guide-Rail Bracket Spacing
346	Fig. 8.4.8.2-3 18 kg/m (12 lb/ft) Guide-Rail Bracket Spacing
347	Fig. 8.4.8.2-4 22.5 kg/m (15 lb/ft) Guide-Rail Bracket Spacing
348	Fig. 8.4.8.2-5 27.5 kg/m (18.5 lb/ft) Guide-Rail Bracket Spacing
349	Fig. 8.4.8.2-6 33.5 kg/m (22.5 lb/ft) Guide-Rail Bracket Spacing
350	Fig. 8.4.8.2-7 44.5 kg/m (30 lb/ft) Guide-Rail Bracket Spacing
351	Fig. 8.4.8.2-8 Car and Counterweight Load Factor
353	Table 8.4.8.7 Stresses and Deflections of Guide-Rail Brackets and Supports
355	Fig. 8.4.8.9 Guide-Rail Axes
356	Fig. 8.4.10.1.1 Earthquake Elevator Equipment Requirements Diagrammatic Representation
357	Table 8.4.10.1.1 Visual Indication Matrix
358	Fig. 8.4.10.1.3 Earthquake Emergency Operation Diagrammatic Representation
361	Table 8.4.11.13 Pipe Support Spacing
365	Table 8.4.12.2.2 Maximum Allowable Deflection
366	SECTION 8.5 ESCALATOR AND MOVING WALK SEISMIC REQUIREMENTS
368	Fig. 8.5.1 Balustrade Handrail Force
369	SECTION 8.6 MAINTENANCE, REPAIR, REPLACEMENT, AND TESTING Table 8.5.5 Component-Based Allowable Design Stresses
381	Table 8.6.4.20.4 Brake Test Loads
389	Fig. 8.6.8.15.19(e)
393	SECTION 8.7 ALTERATIONS
412	SECTION 8.8 WELDING
413	SECTION 8.9 CODE DATA PLATE SECTION 8.10 ACCEPTANCE INSPECTIONS AND TESTS
430	SECTION 8.11 PERIODIC INSPECTIONS AND WITNESSING OF TESTS
437	SECTION 8.12 FLOOD RESISTANCES
438	Part 9 Reference Codes, Standards, and Specifications
449	NONMANDATORY APPENDICES NONMANDATORY APPENDIX A CONTROL SYSTEM
450	Fig. A-1
451	Fig. B-1 Unlocking Zone NONMANDATORY APPENDIX B UNLOCKING ZONE
452	Fig. C-1 Parallelepiped Volume Orientations NONMANDATORY APPENDIX C LOCATION OF TOP EMERGENCY EXIT
453	N0NMANDATORY APPENDIX D RATED LOAD AND CAPACITY PLATES FOR PASSENGER ELEVATORS
454	NONMANDATORY APPENDIX E ELEVATOR REQUIREMENTS FOR PERSONS WITH PHYSICAL DISABILITIES IN JURISDICTIONS ENFORCING NBCC INTRODUCTION E-1 Scope E-2 Definitions E-3 Leveling E-4 Door Operation E-5 Door Size E-6 Door Protective and Reopening Device E-6.1 E-6.2 E-7 Door Timing for Hall and Car Calls E-7.1 E-7.2 E-7.3 E-8 Inside Dimensions of Elevator Cars E-8.1
455	Table E-1 Minimum Dimensions of Elevator Cars E-8.2 E-9 Car Controls E-9.1 Features. E-9.2 Height. E-9.3 Buttons E-9.3.1 Button Dimensions. E-9.3.2 Button Arrangement. E-9.3.2.1 E-9.3.3 Button Characteristics E-9.3.3.1 E-9.3.3.2 E-9.3.4 Control Button. E-9.3.5 Visible Indicators. E-9.3.6 Elevator Car Call Sequential Step Scanning.
456	E-9.4 Telephone-Style Keypads. E-10 Car Position Indicators E-10.1 General. E-10.2 Visible Indicators. E-10.2.1 Floor Arrival. E-10.3 Audible Indicators E-10.3.1 E-10.3.2 E-11 Emergency Communications E-11.1 General. E-11.2 Instructions. E-12 Floor Surfaces E-13 Handrails E-14 Illumination Levels E-15 Hall Buttons E-15.1 E-15.2 E-15.3 E-15.4 E-15.5 E-15.6 Keypads. E-16 Hall or InÃCar Signals E-16.1 General. E-16.2 Audible Signals.
457	E-16.3 Visible Signals E-16.3.1 Height. E-16.3.2 Size. E-16.3.3 Visibility. E-17 Floor/Car Designations E-18 DestinationÃOriented Elevators E-18.1 General. E-18.2 Call Buttons. E-18.3 Hall Signals E-18.3.1 General. E-18.3.2 Visible Signals E-18.3.2.1 Height. E-18.3.2.2 Size. E-18.3.2.3 Visibility. E-18.4 Car Controls. E-18.5 Car Position Indicators E-18.5.1 General. E-18.5.2 Visible Indicators. E-18.5.3 Audible Indicators.
458	E-18.6 Elevator Car Identification. E-18.7 Destination-Oriented Elevators. E-19 LimitedÃUse/LimitedÃApplication Elevators E-19.1 Elevator Door Requirements. E-19.1.1 Sliding Doors. E-19.1.2 Swinging Doors. E-19.1.2.1 Power Operation. E-19.1.2.2 Duration. E-19.1.3 Door Location and Width. E-19.1.3.1 Cars With Single Door or Doors on Opposite Ends. E-19.1.3.2 Cars With Doors on Adjacent Sides E-19.1.3.2.1 E-19.1.3.2.2 E-19.2 Elevator Car Requirements. E-19.2.1 Inside Dimensions. E-19.3 Elevator Car Controls, E-20 Signs E-20.1 E-20.2 Visual Characters E-20.2.1 General E-20.2.1.1 E-20.2.1.2 E-20.2.2 Case. E-20.2.3 Style. E-20.2.4 Character Height. E-20.2.5 Character Width. E-20.2.6 Stroke Width.
459	E-20.2.7 Character Spacing. E-20.2.8 Line Spacing. E-20.2.9 Finish and Contrast. E-20.3 Raised Characters E-20.3.1 General. E-20.3.2 Depth. E-20.3.3 Case. E-20.3.4 Style. E-20.3.5 Character Height E-20.3.5.1 E-20.3.5.2 E-20.3.6 Character Width. E-20.3.7 Stroke Width. E-20.3.7.1 Maximum. E-20.3.7.2 Minimum. E-20.3.8 Character Spacing. E-20.3.9 Line Spacing. E-20.3.10 Location. E-20.3.11 Finish and Contrast E-20.3.11.1 E-20.3.11.2 E-20.4 Braille E-20.4.1 General. E-20.4.2 Uppercase Letters. E-20.4.3 Dimensions.
460	Fig. E-20.4 Braille Measurements Table E-20.4 Measurement Range for Standard Sign Braille E-20.4.4 Position. E-20.5 Pictograms E-20.5.1 General. E-20.5.2 Pictogram Field. E-20.5.3 Finish and Contrast. E-20.6 Symbols of Accessibility E-20.6.1 General.
461	Fig. E-20.6.3 International Symbol of Accessibility E-20.6.2 Finish and Contrast. E-20.6.3 International Symbol of Accessibility. E-20.7 Variable Message Signs E-20.7.1 General. E-20.7.2 Protective Covering. E-20.7.3 Rate of Change.
462	NONMANDATORY APPENDIX F ASCENDING CAR OVERSPEED AND UNINTENDED CAR MOVEMENT PROTECTION
463	Table F-1 Traction Elevator Brake Type, Function, and Performance
464	Fig. F-1 Ascending Car Overspeed Protection (2.19.1)
465	Fig. F-2 Unintended Car Movement Protection (2.19.2)
466	Fig. G-1 Top-of-Car Clearance Requirements Fig. G-2 Additional Top-of-Car Clearance Requirements NONMANDATORY APPENDIX G TOP-OF-CAR CLEARANCE
467	Fig. G-3 Top-of-Car Marking Requirements
468	Fig. G-4 Additional Top-of-Car Marking Requirements
469	Fig. G-5 Additional Top-of-Car Clearance Requirements
470	Fig. G-6 Additional Top-of-Car Clearance
471	Fig. H-1 NONMANDATORY APPENDIX H PRIVATE RESIDENCE ELEVATOR GUARDING 5.3.1.6.2
472	Fig. I-1 Relationship of Escalator Parts Fig. I-2 Handrail NONMANDATORY APPENDIX I ESCALATOR AND MOVING WALK DIAGRAMS
473	Fig. I-3 Escalator Nomenclature
474	Fig. I-4 Skirt or Dynamic Skirt Panel: Step Nose Fig. I-5 Ceiling or Soffit Guard
475	Fig. I-7 Escalator Step Tread Fig. I-8 Cleated Riser
476	Fig. I-9 Moving Walk Geometry
477	Fig. I-10 Moving Walk Treadway Slots Fig. I-11 Stopping Distances Corresponding to a Deceleration Rate of 0.91 m/s2
478	Fig. I-12 Clearance Between Escalator Steps
479	Fig. J-1 NONMANDATORY APPENDIX J RELATIONSHIP OF PIT LADDER TO HOISTWAY DOOR UNLOCKING MEANS
480	Fig. K-1 NONMANDATORY APPENDIX K BEVELING AND CLEARANCE REQUIREMENTS 7.4.7.4
481	NONMANDATORY APPENDIX L INDEX OF ALTERATION REQUIREMENTS FOR ELECTRIC ELEVATORS, HYDRAULIC ELEVATORS, ESCALATORS, AND MOVING WALKS
486	Fig. M-1 NONMANDATORY APPENDIX M INERTIA APPLICATION FOR TYPE A SAFETY DEVICE LOCATION OF TEST WEIGHT 8.10.2.2.2ii2
487	NONMANDATORY APPENDIX N RECOMMENDED INSPECTION AND TEST INTERVALS IN “MONTHS”
488	Table N-1 Recommended Inspection and Test Intervals in “Months”
489	Table N-2 Guidelines on Use of Monitoring to Provide Inspection Data INTRODUCTION TO MONITORING TABLE NÃ2INTRODUCTION TO MONITORING TABLE NÃ2INTRODUCTION TO MONITORING TABLE NÃ2 INTRODUCTION TO MONITORING TABLE NÃ2INTRODUCTION TO MONITORING TABLE NÃ2INTRODUCTION TO MONITORING TABLE NÃ2
495	Table P-1 Plunger Gripper Stopping Distances NONMANDATORY APPENDIX P PLUNGER GRIPPER STOPPING DISTANCES
496	Table Q-1 NONMANDATORY APPENDIX Q EXPLANATORY FIGURES FOR THE DEFINITIONS OF ELEVATOR MACHINERY SPACE, MACHINE ROOM, CONTROL SPACE, CONTROL ROOM, REMOTE MACHINE ROOM, OR REMOTE CONTROL ROOM
497	Fig. Q-1 Fig. Q-2 Fig. Q-3 Fig. Q-4
498	Fig. Q-5 Fig. Q-6
499	NONMANDATORY APPENDIX R INSPECTION OPERATION AND HOISTWAY ACCESS SWITCH OPERATION HIERARCHY
500	Table R-1 Inspection Operation and Hoistway Access Switch Operation Hierarchy
501	NONMANDATORY APPENDIX S VERTICALLY SLIDING DOORS — ILLUSTRATIONS OF DETECTION ZONES 2.13.3.4
502	Fig. S-1
503	Fig. S-2
504	Fig. S-3
505	Fig. S-4
506	Fig. S-5
507	Fig. S-6
508	Fig. S-7
509	Fig. S-8
510	Fig. S-9
511	Fig. S-10
512	Fig. S-11
513	Fig. S-12
514	NONMANDATORY APPENDIX T
515	Table U-1 Design Requirements — Traction Elevator Suspension System NONMANDATORY APPENDIX U DESIGN REQUIREMENTS — TRACTION ELEVATOR SUSPENSION SYSTEM
516	NONMANDATORY APPENDIX V BUILDING FEATURES FOR OCCUPANT EVACUATION OPERATION V-1 Human Factors Considerations V-1.1 Occupant Evacuation Operation.
518	NONMANDATORY APPENDIX W
519	Table X-1 Acceptance Test for Electric Elevators Acceptance Test: Electric Elevators NONMANDATORY APPENDIX X ACCEPTANCE TESTS
520	Table X-2 Acceptance Test for Hydraulic Elevators Acceptance Test: Hydraulic Elevators
521	Table X-3 Acceptance Test for Escalators Acceptance Test: Escalators
522	Table X-4 Acceptance Test for Moving Walks Acceptance Test: Moving Walks
523	NONMANDATORY APPENDIX Y MAINTENANCE CONTROL PROGRAM RECORDS
524	Table Y-1 Maintenance Control Program Records
526	Table Z-1 Mass and Closing Time of Horizontally Sliding Elevator Doors NONMANDATORY APPENDIX Z MASS AND CLOSING TIME OF HORIZONTALLY SLIDING ELEVATOR DOORS
527	INDEX
554	INTERPRETATIONS NO. 33 INTRODUCTION APPLICABILITY OF INTERPRETATIONS FORM AND ARRANGEMENT
556	Inquiry: 11-2010 Inquiry: 11-2153 Inquiry: 11-2155
557	Inquiry: 11-2156
558	Inquiry: 11-2229
559	Inquiry: 11-2229 Reconsideration
560	Inquiry: 12-990
561	Inquiry: 12-990 Reconsideration
562	Inquiry: 12-991 Inquiry: 12-1012
563	Inquiry: 12-1552 Inquiry: 12-1618
564	Inquiry: 12-1620 Inquiry: 12-1745 Inquiry: 12-1746
565	Inquiry: 12-1747 Inquiry: 12-1748 Inquiry: 12-1749
566	Inquiry: 12-1751 Inquiry: 12-1752 Inquiry: 12-2274
567	Inquiry: 13-5
568	Inquiry: 13-273
569	Inquiry: 13-319 Inquiry: 13-343
570	Inquiry: 13-445
572	Inquiry: 13-496 Inquiry: 13-702 Inquiry: 13-719
573	Inquiry: 13-742 Inquiry: 13-787 Inquiry: 13-934
574	Inquiry: 13-1022
575	Inquiry: 13-1050 Inquiry: 13-1460 Inquiry: 13-1462
576	Inquiry: 13-1463 Inquiry: 13-1471 Inquiry: 13-1496
577	Inquiry: 13-1509 Inquiry: 13-1543 Inquiry: 13-1544
578	Inquiry: 13-1753 Inquiry: 13-1790 Inquiry: 13-2001
579	Inquiry: 13-2177 Inquiry: 13-2197 Inquiry: 14-61
580	Inquiry: 14-62 Inquiry: 14-85 Inquiry: 14-95
581	Inquiry: 14-96 Inquiry: 14-227
582	Inquiry: 14-324 Inquiry: 14-411 Inquiry: 14-503
583	Inquiry: 14-665 Inquiry: 14-702
584	Inquiry: 14-971 Inquiry: 14-999 Inquiry: 14-1000
585	Inquiry: 14-1023 Inquiry: 14-1025
586	Inquiry: 14-1026 Inquiry: 14-1104
587	Inquiry: 14-1426 Inquiry: 14-1503
588	Inquiry: 14-1637 Inquiry: 14-1834 Inquiry: 14-1883
589	Inquiry: 14-1885 Inquiry: 15-39 Inquiry: 15-136
590	Inquiry: 15-142 Inquiry: 15-319
591	Inquiry: 15-476 Inquiry: 15-501
592	Inquiry: 15-614
593	Inquiry: 15-716 Inquiry: 15-883
594	Inquiry: 15-886 Inquiry: 15-1139 Inquiry: 15-1446
595	Inquiry: 15-1447 Inquiry: 15-1671 Inquiry: 15-1697 Inquiry: 15-1755
596	Inquiry: 15-2003 Inquiry: 15-2004

Published By	Publication Date	Number of Pages
ASME	2016	599


PDF Format	Searchable	Printable	Preview Now

Standard Title	ASME A17.1 / CSA B44 – 2016 Safety Code for Elevators and Escalators with February 2021 ERRATA
Published Code	ASME
Publication Date	2016
Pages Count	599

ASME A17.1 2016 w ERRATA 0121

PDF Catalog

Related products