🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME A17.2 2020

ASME A17.2 2020

$98.04

ASME A17.2 – 2020: Guide for Inspection of Elevators, Escalators, and Moving Walks

Published By Publication Date Number of Pages
ASME 2020 477
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This Guide covers recommended inspection and testing procedures for electric and hydraulic elevators, escalators, and moving walks required to conform to the Safety Code for Elevators and Escalators, A17.1-1955 and later editions and The Safety Code for Existing Elevators and Escalators, A17.3. This Guide also addresses some requirements from editions of A17.1 prior to 1955. NOTE: This Guide may not reflect the latest requirements in the current A17.1 and A17.3 Codes.

PDF Catalog

PDF Pages PDF Title
4 CONTENTS
15 FOREWORD
18 ASME A17 ELEVATOR AND ESCALATOR COMMITTEE ROSTER
24 PREFACE
28 ASME A17.2-2020 SUMMARY OF CHANGES
30 Introduction
1 SCOPE
2 APPLICATION
31 3 QUALIFICATIONS OF INSPECTORS
4 PERSONAL SAFETY
5 DUTIES OF INSPECTORS
6 ARRANGEMENT FOR INSPECTION
7 RECOMMENDED EQUIPMENT
32 8 REFERENCE DOCUMENTS
Tables
Table 1 Procurement Information
33 Part 1 Elevator — Inside of Car
ITEM 1.1 DOOR REOPENING DEVICE
1.1.1 Periodic Inspections
1.1.2 Periodic Test
1.1.3 Acceptance
1.1.4 References
34 ITEM 1.2 STOP SWITCHES
1.2.1 Periodic Inspections
1.2.2 Periodic Test
1.2.3 Acceptance
1.2.4 References
ITEM 1.3 OPERATING CONTROL DEVICES
1.3.1 Periodic Inspections
35 1.3.2 Periodic Test
1.3.3 Acceptance
1.3.4 References
ITEM 1.4 SILLS AND CAR FLOOR
1.4.1 Periodic Inspections
36 1.4.2 Periodic Test
1.4.3 Acceptance
1.4.4 References
ITEM 1.5 CAR LIGHTING AND RECEPTACLES
1.5.1 Periodic Inspections
1.5.2 Periodic Test
1.5.3 Acceptance
37 1.5.4 References
ITEM 1.6 CAR EMERGENCY SIGNAL AND COMMUNICATION DEVICE(S)
1.6.1 Periodic Inspections
38 1.6.2 Periodic Test
1.6.3 Acceptance
1.6.4 References
ITEM 1.7 CAR DOOR OR GATE
1.7.1 Periodic Inspections
39 1.7.2 Periodic Test
1.7.3 Acceptance
1.7.4 References
ITEM 1.8 DOOR CLOSING FORCE
1.8.1 Periodic Inspections
1.8.2 Periodic Test: Category 1 (Annual) Test
1.8.3 Acceptance
1.8.4 References
40 ITEM 1.9 POWER CLOSING OF DOORS OR GATES
1.9.1 Periodic Inspections
1.9.2 Periodic Test
1.9.3 Acceptance
1.9.4 References
ITEM 1.10 POWER OPENING OF DOORS OR GATES
1.10.1 Periodic Inspections
1.10.2 Periodic Test
41 Figures
Figure 1.10.2 Door Operation Relative to Car Position
42 1.10.3 Acceptance
1.10.4 References
ITEM 1.11 CAR VISION PANELS AND GLASS CAR DOORS
1.11.1 Periodic Inspections
1.11.2 Periodic Test
1.11.3 Acceptance
1.11.4 References
43 ITEM 1.12 CAR ENCLOSURE
1.12.1 Periodic Inspections
1.12.2 Periodic Test
1.12.3 Acceptance
44 1.12.4 References
ITEM 1.13 EMERGENCY EXIT
1.13.1 Periodic Inspections
1.13.2 Periodic Test
1.13.3 Acceptance
1.13.4 References
45 ITEM 1.14 VENTILATION
1.14.1 Periodic Inspections
1.14.2 Periodic Test
1.14.3 Acceptance
1.14.4 References
ITEM 1.15 SIGNS AND OPERATING DEVICE SYMBOLS
1.15.1 Periodic Inspections
1.15.2 Periodic Test
1.15.3 Acceptance
1.15.4 References
ITEM 1.16 RATED LOAD, PLATFORM AREA, AND DATA PLATE
1.16.1 Periodic Inspections
1.16.2 Periodic Test
1.16.3 Acceptance
46 1.16.4 References
ITEM 1.17 STANDBY POWER OPERATION
1.17.1 Periodic Inspections
1.17.2 Periodic Test
1.17.3 Acceptance
47 1.17.4 References
ITEM 1.18 RESTRICTED OPENING OF CAR OR HOISTWAY DOORS
1.18.1 Periodic Inspections
48 1.18.2 Periodic Test
1.18.3 Acceptance
1.18.4 References
ITEM 1.19 CAR RIDE
1.19.1 Periodic Inspections
1.19.2 Periodic Test
1.19.3 Acceptance
1.19.4 References
49 ITEM 1.20 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
1.20.1 Periodic Inspections
1.20.2 Periodic Test
1.20.3 Acceptance
1.20.4 References
50 Part 2 Elevator — Machine Room
ITEM 2.1 ACCESS TO MACHINERY SPACE
2.1.1 Periodic Inspections
2.1.2 Periodic Test
2.1.3 Acceptance
2.1.4 References
ITEM 2.2 HEADROOM
2.2.1 Periodic Inspections
2.2.2 Periodic Test
2.2.3 Acceptance
51 2.2.4 References
ITEM 2.3 LIGHTING AND RECEPTACLES
2.3.1 Periodic Inspections
2.3.2 Periodic Test
2.3.3 Acceptance
2.3.4 References
52 ITEM 2.4 MACHINERY SPACE
2.4.1 Periodic Inspections
2.4.2 Periodic Test
2.4.3 Acceptance
2.4.4 References
ITEM 2.5 HOUSEKEEPING
2.5.1 Periodic Inspections
53 2.5.2 Periodic Test
2.5.3 Acceptance
2.5.4 References
ITEM 2.6 VENTILATION
2.6.1 Periodic Inspections
2.6.2 Periodic Test
2.6.3 Acceptance
2.6.4 References
ITEM 2.7 FIRE EXTINGUISHER
2.7.1 Periodic Inspections
54 2.7.2 Periodic Test
2.7.3 Acceptance
2.7.4 References
ITEM 2.8 PIPES, WIRING, AND DUCTS
2.8.1 Periodic Inspections
2.8.2 Periodic Test
2.8.3 Acceptance
2.8.4 References
ITEM 2.9 GUARDING OF EXPOSED AUXILIARY EQUIPMENT
2.9.1 Periodic Inspections
55 2.9.2 Periodic Test
2.9.3 Acceptance
2.9.4 References
ITEM 2.10 NUMBERING OF ELEVATORS, MACHINES, CONTROLLERS, AND DISCONNECT SWITCHES
2.10.1 Periodic Inspections
2.10.2 Periodic Test
2.10.3 Acceptance
2.10.4 References
ITEM 2.11 DISCONNECTING MEANS AND CONTROL
2.11.1 Periodic Inspections
56 2.11.2 Periodic Test
2.11.3 Acceptance
2.11.4 References
57 ITEM 2.12 CONTROLLER WIRING, FUSES, GROUNDING, ETC.
2.12.1 Periodic Inspections
2.12.2 Periodic Test
2.12.3 Acceptance
58 2.12.4 References
ITEM 2.13 GOVERNOR, OVERSPEED SWITCH, AND SEAL
2.13.1 Periodic Inspections
2.13.2 Periodic Test
60 Table 2.13.2.1 Governor Adjustment Settings
61 Figure 2.13.2.1 Dynamometer Connections for Testing the Pull-Through of Governor Jaws
62 2.13.3 Acceptance
63 2.13.4 References
ITEM 2.14 CODE DATA PLATE
2.14.1 Periodic Inspections
2.14.2 Periodic Test
2.14.3 Acceptance
2.14.4 References
64 ITEM 2.15 STATIC CONTROL
2.15.1 Periodic Inspections
2.15.2 Periodic Test
2.15.3 Acceptance
2.15.4 References
ITEM 2.16 OVERHEAD BEAM AND FASTENINGS
2.16.1 Periodic Inspections
2.16.2 Periodic Test
2.16.3 Acceptance
2.16.4 References
ITEM 2.17 DRIVE MACHINE BRAKE
2.17.1 Periodic Inspections
65 2.17.2 Periodic Test
2.17.3 Acceptance
2.17.4 References
66 ITEM 2.18 TRACTION-DRIVE MACHINES
2.18.1 Periodic Inspections
2.18.2 Periodic Test
2.18.3 Acceptance
2.18.4 References
ITEM 2.19 GEARS, BEARINGS, AND FLEXIBLE COUPLINGS
2.19.1 Periodic Inspections
67 2.19.2 Periodic Test
2.19.3 Acceptance
2.19.4 References
ITEM 2.20 WINDING DRUM MACHINE AND SLACK ROPE DEVICE, STOP-MOTION SWITCH, AND ROPE FASTENING
2.20.1 Periodic Inspections
68 2.20.2 Periodic Test
2.20.3 Acceptance
2.20.4 References
ITEM 2.21 BELT- OR CHAIN-DRIVE MACHINE
2.21.1 Periodic Inspections
69 2.21.2 Periodic Test
2.21.3 Acceptance
2.21.4 References
ITEM 2.22 MOTOR GENERATOR
2.22.1 Periodic Inspections
2.22.2 Periodic Test
2.22.3 Acceptance Test of Generator Suicide Circuit
2.22.4 References
ITEM 2.23 ABSORPTION OF REGENERATED POWER
2.23.1 Periodic Inspections
2.23.2 Periodic Test
2.23.3 Acceptance
2.23.4 References
ITEM 2.24 AC DRIVES FROM A DC SOURCE
2.24.1 Periodic Inspections
2.24.2 Periodic Test
70 2.24.3 Acceptance
2.24.4 References
ITEM 2.25 TRACTION SHEAVES
2.25.1 Periodic Inspections
2.25.2 Periodic Test
2.25.3 Acceptance
2.25.4 References
71 ITEM 2.26 SECONDARY AND DEFLECTOR SHEAVES
2.26.1 Periodic Inspections
2.26.2 Periodic Test
2.26.3 Acceptance
2.26.4 References
ITEM 2.27 ROPE FASTENINGS
2.27.1 Periodic Inspections
2.27.2 Periodic Test
2.27.3 Acceptance
2.27.4 References
ITEM 2.28 TERMINAL STOPPING DEVICES
2.28.1 Periodic Inspections
72 2.28.2 Periodic Test
2.28.3 Acceptance
2.28.4 References
73 ITEM 2.29 CAR AND COUNTERWEIGHT SAFETIES
2.29.1 Periodic Inspections
2.29.2 Periodic Test
Table 2.29.2(a) Maximum Safety Rope Pullout
76 Table 2.29.2(b) Minimum and Maximum Stopping Distances for Type B Car Safeties With Rated Load, and Type B Counterweight Safeties With No Load in the Car
Table 2.29.2(c) Gradual Wedge Clamp Safety
Table 2.29.2(d) Flexible Guide Clamp Safety
77 Figure 2.29.2(a) Safety Marks on Guide Rails, Poor Illumination
Table 2.29.2(e) Wedge Clamp Safety (Constant Retarding Force)
78 2.29.3 Acceptance Test of Governor and Safeties
2.29.4 References
ITEM 2.30 HYDRAULIC POWER UNIT
2.30.1 Periodic Inspections
Figure 2.29.2(b) Safety Marks on Guide Rails, Good Illumination
79 2.30.2 Periodic Test
2.30.3 Acceptance
2.30.4 References
ITEM 2.31 RELIEF VALVES
2.31.1 Periodic Inspections
2.31.2 Periodic Test
2.31.3 Acceptance
2.31.4 References
80 ITEM 2.32 CONTROL VALVE
2.32.1 Periodic Inspections
2.32.2 Periodic Test
2.32.3 Acceptance
2.32.4 References
ITEM 2.33 TANKS
2.33.1 Periodic Inspections
81 2.33.2 Periodic Test
2.33.3 Acceptance
2.33.4 References
ITEM 2.34 FLEXIBLE HYDRAULIC HOSES AND FITTING ASSEMBLIES
2.34.1 Periodic Inspections
2.34.2 Periodic Test
2.34.3 Acceptance Test
Table 2.34.3 Minimum Bend Radius for SAE 100R2 Hose
82 2.34.4 References
ITEM 2.35 SUPPLY LINE AND SHUTOFF VALVE
2.35.1 Periodic Inspections
2.35.2 Periodic Test
2.35.3 Acceptance
2.35.4 References
ITEM 2.36 HYDRAULIC CYLINDERS
2.36.1 Periodic Inspections
2.36.2 Periodic Test
83 2.36.3 Acceptance
2.36.4 References
ITEM 2.37 PRESSURE SWITCH
2.37.1 Periodic Inspections
2.37.2 Periodic Test
2.37.3 Acceptance
2.37.4 References
ITEM 2.38 ROPED WATER HYDRAULIC ELEVATORS
2.38.1 Periodic Inspections
2.38.2 Periodic Test
2.38.3 Acceptance
2.38.4 References
ITEM 2.39 LOW OIL PROTECTION
2.39.1 Periodic Inspections
2.39.2 Periodic Test
84 2.39.3 Acceptance
2.39.4 References
ITEM 2.40 MAINTENANCE RECORDS
2.40.1 Periodic Inspections
2.40.2 Periodic Test
2.40.3 Acceptance
2.40.4 References
ITEM 2.41 HYDRAULIC CONTROL
2.41.1 Periodic Inspections
2.41.2 Periodic Test
2.41.3 Acceptance
2.41.4 References
ITEM 2.42 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
2.42.1 Periodic Inspections
85 2.42.2 Periodic Test
2.42.3 Acceptance
2.42.4 References
86 ITEM 2.43 EMERGENCY BRAKE, ASCENDING CAR OVERSPEED, AND UNINTENDED CAR MOVEMENT PROTECTION
2.43.1 Periodic Inspections
2.43.2 Periodic Test
2.43.3 Acceptance
2.43.4 References
87 Table 2.43.3.1 Traction Elevator Brake Type, Function, and Performance
88 ITEM 2.44 AUXILIARY POWER LOWERING OPERATION
2.44.1 Periodic Inspections
2.44.2 Periodic Test
2.44.3 Acceptance
2.44.4 References
ITEM 2.45 INSPECTION OPERATION WITH OPEN DOOR CIRCUITS AND INSPECTION OPERATION HIERARCHY
2.45.1 Periodic Inspections
2.45.2 Periodic Test
2.45.3 Acceptance
2.45.4 References
Table 2.45.3 Operation Hierarchy
89 Part 3 Elevator — Top of Car
ITEM 3.1 TOP-OF-CAR STOP SWITCH
3.1.1 Periodic Inspections
3.1.2 Periodic Test
3.1.3 Acceptance
3.1.4 References
ITEM 3.2 CAR TOP LIGHT AND OUTLET
3.2.1 Periodic Inspections
3.2.2 Periodic Test
3.2.3 Acceptance
3.2.4 References
90 ITEM 3.3 TOP-OF-CAR OPERATING DEVICE
3.3.1 Periodic Inspections: Routine Inspections (for A17.1d-2000 and Earlier Editions); Periodic Inspections (for A17.1-2000 and Later Editions)
3.3.2 Periodic Test
3.3.3 Acceptance
3.3.4 References
ITEM 3.4 TOP-OF-CAR CLEARANCE, REFUGE SPACE, AND STANDARD RAILING
3.4.1 Periodic Inspections: Routine Inspections (for A17.1d-2000 and Earlier Editions); Periodic Inspections (for A17.1-2000 and Later Editions)
91 3.4.2 Periodic Test
3.4.3 Acceptance
92 3.4.4 References
Figure 3.4.1.2 Car Top Clearance and Runby (A17.1-1978 and Later Editions)
93 ITEM 3.5 NORMAL TERMINAL STOPPING DEVICES
3.5.1 Periodic Inspections
3.5.2 Periodic Test
3.5.3 Acceptance
3.5.4 References
ITEM 3.6 FINAL AND EMERGENCY TERMINAL STOPPING DEVICES
3.6.1 Periodic Inspections
94 3.6.2 Periodic Test
3.6.3 Acceptance
3.6.4 References
ITEM 3.7 CAR LEVELING AND ANTICREEP DEVICES
3.7.1 Periodic Inspections
95 3.7.2 Periodic Test
3.7.3 Acceptance
3.7.4 References
ITEM 3.8 TOP EMERGENCY EXIT
3.8.1 Periodic Inspections: Routine Inspections (for A17.1d-2000 and Earlier Editions); Periodic Inspections (for A17.1d-2000 and Later Editions)
3.8.2 Periodic Test
3.8.3 Acceptance
3.8.4 References
96 ITEM 3.9 FLOOR AND EMERGENCY IDENTIFICATION NUMBERING
3.9.1 Periodic Inspections
3.9.2 Periodic Test
3.9.3 Acceptance
3.9.4 References
ITEM 3.10 HOISTWAY CONSTRUCTION
3.10.1 Periodic Inspections
3.10.2 Periodic Test
3.10.3 Acceptance
3.10.4 References
ITEM 3.11 HOISTWAY SMOKE CONTROL
3.11.1 Periodic Inspections
97 3.11.2 Periodic Test
3.11.3 Acceptance
3.11.4 References
ITEM 3.12 PIPES, WIRING, AND DUCTS
3.12.1 Periodic Inspections
3.12.2 Periodic Test
3.12.3 Acceptance
3.12.4 References
98 ITEM 3.13 WINDOWS, PROJECTIONS, RECESSES, AND SETBACKS
3.13.1 Periodic Inspections
3.13.2 Periodic Test
3.13.3 Acceptance
3.13.4 References
ITEM 3.14 HOISTWAY CLEARANCES
3.14.1 Periodic Inspections
3.14.2 Periodic Test
3.14.3 Acceptance
3.14.4 References
Table 3.14.3(a) Horizontal Clearances
99 ITEM 3.15 MULTIPLE HOISTWAYS
3.15.1 Periodic Inspections
3.15.2 Periodic Test
3.15.3 Acceptance
3.15.4 References
ITEM 3.16 TRAVELING CABLES AND JUNCTION BOXES
3.16.1 Periodic Inspections
Table 3.14.3(b) Horizontal Distances
100 3.16.2 Periodic Test
3.16.3 Acceptance
3.16.4 References
Figure 3.16.1 Self-Tightening Grips
101 ITEM 3.17 DOOR AND GATE EQUIPMENT
3.17.1 Periodic Inspections
102 3.17.2 Periodic Test
3.17.3 Acceptance
3.17.4 References
ITEM 3.18 CAR FRAME AND STILES
3.18.1 Periodic Inspections
103 3.18.2 Periodic Test
3.18.3 Acceptance
3.18.4 References
ITEM 3.19 GUIDE RAILS, FASTENINGS, AND EQUIPMENT
3.19.1 Periodic Inspections
3.19.2 Periodic Test
3.19.3 Acceptance
3.19.4 References
104 ITEM 3.20 GOVERNOR ROPE
3.20.1 Periodic Inspections
3.20.2 Periodic Test
3.20.3 Acceptance
3.20.4 References
ITEM 3.21 GOVERNOR RELEASING CARRIER
3.21.1 Periodic Inspections
3.21.2 Periodic Test: 5-yr Test (for A17.1d-2000 and Earlier Editions); Category 5 Test (for A17.1-2000/B44-00 and Later Editions)
3.21.3 Acceptance
3.21.4 References
105 ITEM 3.22 WIRE ROPE FASTENING AND HITCH PLATE
3.22.1 Periodic Inspections
106 3.22.2 Periodic Test
3.22.3 Acceptance
3.22.4 References
Figure 3.22.1 Cross Section Through Tapered Rope Socket Showing Maximum and Minimum Projection of Loops Above Embedment Medium
107 ITEM 3.23 SUSPENSION COMPENSATION AND GOVERNOR SYSTEMS
3.23.1 Periodic Inspections
Table 3.22.1 Projection of Rope Strands Above Embedment Medium for 6- and 8-Strand Ropes
108 Figure 3.23.1(a) Types of Lay
109 Figure 3.23.1(b) Cross Sections of Typical Wire Ropes
110 Figure 3.23.1(c) Inspection and Replacement of Steel Wire Ropes
111 3.23.2 Periodic Test
3.23.3 Acceptance
3.23.4 References
ITEM 3.24 TOP COUNTERWEIGHT CLEARANCE
3.24.1 Periodic Inspections
112 3.24.2 Periodic Test
3.24.3 Acceptance
3.24.4 References
ITEM 3.25 CAR, OVERHEAD, AND DEFLECTOR SHEAVES
3.25.1 Periodic Inspections
3.25.2 Periodic Test
3.25.3 Acceptance
3.25.4 References
ITEM 3.26 BROKEN ROPE, CHAIN, OR TAPE SWITCH
3.26.1 Periodic Inspections
3.26.2 Periodic Test
3.26.3 Acceptance
3.26.4 References
113 ITEM 3.27 CROSSHEAD DATA PLATE AND ROPE DATA TAGS
3.27.1 Periodic Inspections
3.27.2 Periodic Test
3.27.3 Acceptance
3.27.4 References
ITEM 3.28 COUNTERWEIGHT AND COUNTERWEIGHT BUFFER
3.28.1 Periodic Inspections
3.28.2 Periodic Test
3.28.3 Acceptance
3.28.4 References
114 ITEM 3.29 COUNTERWEIGHT SAFETIES
3.29.1 Periodic Inspections
3.29.2 Periodic Test
3.29.3 Acceptance
3.29.4 References
ITEM 3.30 SPEED TEST
3.30.1 Periodic Inspections
3.30.2 Periodic Test
3.30.3 Acceptance
115 3.30.4 References
ITEM 3.31 SLACK ROPE DEVICE — ROPED HYDRAULIC ELEVATORS INSTALLED UNDER A17.1b-1989 AND LATER EDITIONS
3.31.1 Periodic Inspections
3.31.2 Periodic Test
3.31.3 Acceptance
3.31.4 References
ITEM 3.32 TRAVELING SHEAVE — ROPED HYDRAULIC ELEVATORS INSTALLED UNDER A17.1b-1989 AND LATER EDITIONS
3.32.1 Periodic Inspections
3.32.2 Periodic Test
3.32.3 Acceptance
116 3.32.4 References
ITEM 3.33 COMPENSATING ROPES AND CHAINS
3.33.1 Periodic Inspections
3.33.2 Periodic Test
3.33.3 Acceptance
3.33.4 References
ITEM 3.34 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
3.34.1 Periodic Inspection
3.34.2 Periodic Test
3.34.3 Acceptance
117 3.34.4 References
118 Part 4 Elevator — Outside Hoistway
ITEM 4.1 CAR PLATFORM GUARD
4.1.1 Periodic Inspections
4.1.2 Periodic Test
4.1.3 Acceptance
4.1.4 References
ITEM 4.2 HOISTWAY DOORS
4.2.1 Periodic Inspections
119 4.2.2 Periodic Test
4.2.3 Acceptance
4.2.4 References
Table 4.2.1-1 Maximum Allowable Opening for a Hoistway Door or Gate in the Closed Position
120 ITEM 4.3 VISION PANELS
4.3.1 Periodic Inspections
4.3.2 Periodic Test
4.3.3 Acceptance
4.3.4 References
ITEM 4.4 HOISTWAY DOOR-LOCKING DEVICES
4.4.1 Periodic Inspections
4.4.2 Periodic Test
4.4.3 Acceptance
4.4.4 References
121 ITEM 4.5 ACCESS TO HOISTWAY
4.5.1 Periodic Inspections
4.5.2 Periodic Test
4.5.3 Acceptance
4.5.4 References
ITEM 4.6 POWER CLOSING OF HOISTWAY DOORS
4.6.1 Periodic Inspections
4.6.2 Periodic Test
4.6.3 Acceptance
4.6.4 References
122 ITEM 4.7 SEQUENCE OPERATION
4.7.1 Periodic Inspections
4.7.2 Periodic Test
4.7.3 Acceptance
4.7.4 References
ITEM 4.8 HOISTWAY ENCLOSURE
4.8.1 Periodic Inspections
4.8.2 Periodic Test
4.8.3 Acceptance
4.8.4 References
ITEM 4.9 ELEVATOR PARKING DEVICES
4.9.1 Periodic Inspections
4.9.2 Periodic Test
4.9.3 Acceptance
123 4.9.4 References
ITEM 4.10 EMERGENCY DOORS IN BLIND HOISTWAYS
4.10.1 Periodic Inspections
4.10.2 Periodic Test
4.10.3 Acceptance
4.10.4 References
ITEM 4.11 SEPARATE COUNTERWEIGHT HOISTWAY
4.11.1 Periodic Inspections
4.11.2 Periodic Test
4.11.3 Acceptance
4.11.4 References
ITEM 4.12 STANDBY POWER SELECTION SWITCH
4.12.1 Periodic Inspections
124 4.12.2 Periodic Test: Yearly Test (for A17.1d-2000 and Earlier Editions); Category 1 Test (for A17.1-2000/B44-00 and Later Editions)
4.12.3 Acceptance
4.12.4 References
ITEM 4.13 EQUIPMENT IN PUBLIC LOCATIONS
4.13.1 Periodic Inspections
4.13.2 Periodic Test
4.13.3 Acceptance
4.13.4 References
125 Part 5 Elevator — Pit
ITEM 5.1 PIT ACCESS, LIGHTING, STOP SWITCH, AND CONDITION
5.1.1 Periodic Inspections
5.1.2 Periodic Test
5.1.3 Acceptance
126 5.1.4 References
ITEM 5.2 BOTTOM CLEARANCE, RUNBY, AND MINIMUM REFUGE SPACE
5.2.1 Periodic Inspections
5.2.2 Periodic Test
5.2.3 Acceptance
127 Figure 5.2.3.1 Bottom Car Clearance Electric and Hydraulic Elevators
128 5.2.4 References
ITEM 5.3 FINAL AND EMERGENCY TERMINAL STOPPING DEVICES
5.3.1 Periodic Inspections
5.3.2 Periodic Test
129 5.3.3 Acceptance
5.3.4 References
ITEM 5.4 NORMAL TERMINAL STOPPING DEVICES
5.4.1 Periodic Inspections
5.4.2 Periodic Test
5.4.3 Acceptance
5.4.4 References
ITEM 5.5 TRAVELING CABLES
5.5.1 Periodic Inspections
5.5.2 Periodic Test
5.5.3 Acceptance
5.5.4 References
ITEM 5.6 GOVERNOR-ROPE TENSION DEVICES
5.6.1 Periodic Inspections
130 5.6.2 Periodic Test
5.6.3 Acceptance
5.6.4 References
ITEM 5.7 CAR FRAME AND PLATFORM
5.7.1 Periodic Inspections
5.7.2 Periodic Test
5.7.3 Acceptance
5.7.4 References
131 ITEM 5.8 CAR AND COUNTERWEIGHT SAFETIES AND GUIDING MEMBERS — INCLUDING ROPED HYDRAULIC ELEVATORS INSTALLED UNDER A17.1b-1989 AND LATER EDITIONS
5.8.1 Periodic Inspections
5.8.2 Periodic Test
132 5.8.3 Acceptance
5.8.4 References
ITEM 5.9 CAR AND COUNTERWEIGHT BUFFERS AND EMERGENCY TERMINAL SPEED-LIMITING DEVICES
5.9.1 Periodic Inspections
Figure 5.8.1.1-1 Safety Gripping Face and Guide Rail Minimum Clearance
133 5.9.2 Periodic Test
134 5.9.3 Acceptance
5.9.4 References
ITEM 5.10 COMPENSATING CHAINS, ROPES, AND SHEAVES
5.10.1 Periodic Inspections
135 5.10.2 Periodic Test
5.10.3 Acceptance
5.10.4 References
ITEM 5.11 PLUNGER AND CYLINDER
5.11.1 Periodic Inspections
5.11.2 Periodic Test
5.11.3 Acceptance
5.11.4 References
ITEM 5.12 (RESERVED)
ITEM 5.13 GUIDING MEMBERS
5.13.1 Periodic Inspections
5.13.2 Periodic Test
5.13.3 Acceptance
5.13.4 References
136 ITEM 5.14 SUPPLY PIPING
5.14.1 Periodic Inspections
5.14.2 Periodic Test
5.14.3 Acceptance
5.14.4 References
ITEM 5.15 OVERSPEED VALVE
5.15.1 Periodic Inspections
5.15.2 Periodic Test
5.15.3 Acceptance
5.15.4 References
137 ITEM 5.16 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
5.16.1 Periodic Inspections
5.16.2 Periodic Test
5.16.3 Acceptance
5.16.4 References
ITEM 5.17 PLUNGER GRIPPER
5.17.1 Periodic Inspections
138 5.17.2 Periodic Test
5.17.3 Acceptance
139 5.17.4 References
Table 5.17.3.2 Plunger Gripper Stopping Distances With Rated Load in the Car
140 Part 6 Elevator — Firefighters’ Service
ITEM 6.1 OPERATION OF ELEVATORS UNDER FIRE AND OTHER EMERGENCY CONDITIONS (A17.1b-1973 THROUGH A17.1b-1980)
6.1.1 Periodic Inspections
6.1.2 Periodic Test: Yearly Test (for A17.1d-2000 and Earlier Editions); Category 1 Test (for A17.1-2000/B44-00 and Later Editions)
141 6.1.3 Acceptance
6.1.4 References
142 ITEM 6.2 OPERATION OF ELEVATORS UNDER FIRE AND OTHER EMERGENCY CONDITIONS (A17.1-1981 THROUGH A17.1b-1983)
6.2.1 Periodic Inspections
6.2.2 Periodic Test: Yearly Test (for A17.1d-2000 and Earlier Editions); Category 1 Test (for A17.1-2000/B44-00 and Later Editions)
144 6.2.3 Acceptance
6.2.4 References
ITEM 6.3 FIREFIGHTERS’ SERVICE (A17.1-1984 THROUGH A17.1a-1988 and A17.3)
6.3.1 Periodic Inspections
6.3.2 Periodic Test: Yearly Test (for A17.1d-2000 and Earlier Editions); Category 1 Test (for A17.1-2000/B44-00 and Later Editions)
146 6.3.3 Acceptance
6.3.4 References
ITEM 6.4 FIREFIGHTERS’ SERVICE (A17.1b-1989 THROUGH A17.1d-2000)
6.4.1 Periodic Inspections
6.4.2 Periodic Test: Yearly Test (for A17.1d-2000 and Earlier Editions); Category 1 Test (for A17.1-2000/B44-00 and Later Editions)
147 Figure 6.4.2(a) Visual Signal
149 6.4.3 Acceptance
6.4.4 References
Figure 6.4.2(b) Phase I Instructions
Figure 6.4.2(c) Phase II Instructions (A17.1b-1989 Through A17.1b-1995)
150 ITEM 6.5 ACCEPTANCE CHECKLIST FOR FIREFIGHTERS’ SERVICE (A17.1-2000/B44-00): AUTOMATIC ELEVATORS
6.5.1 Emergency Signaling Devices
Figure 6.4.2(d) Phase II Instructions (A17.1-1996 Through A17.1d-2000)
151 6.5.2 Phase I Key Switch and Instructions
6.5.3 Phase II In-Car Switch and Instructions
6.5.4 Monthly Test
6.5.5 Phase I Operation While Running
6.5.6 Phase I Operation With Doors Open
6.5.7 Emergency Stop Switch and/or In-Car Stop Switch and Doors Closing
6.5.8 Stop Switches and Door Buttons
6.5.9 Fire-Alarm-Initiating Device and Operation
152 6.5.10 Fire-Alarm-Initiating Device and Phase I Switch
6.5.11 Phase II Key Switch and Sign
6.5.12 Phase II Switch in the “HOLD” Position
6.5.13 Phase II Switch in the “OFF” Position and Doors Closing: Power-Operated Horizontally and Vertically Sliding Doors
153 6.5.14 Removal From Phase II Operation
6.5.15 Power Disconnects Open
6.5.16 Top-of-Car Operating Device
6.5.17 Automatic Elevators With Attendant Operation
6.5.18 Elevators on Phase I and Phase II Operation, Prevention of Operation and Disabling Not Allowed
154 Part 7 Escalator — External
ITEM 7.1 GENERAL FIRE PROTECTION
7.1.1 Periodic Inspections
7.1.2 Periodic Test
7.1.3 Acceptance
7.1.4 References
ITEM 7.2 GEOMETRY
7.2.1 Periodic Inspections
7.2.2 Periodic Test
7.2.3 Acceptance
155 7.2.4 References
ITEM 7.3 HANDRAILS
7.3.1 Periodic Inspections
Figure 7.2.1(a) Dimensions for Existing Escalators (for Escalators Installed Under A17.1-1955 and A17.1-1960 Editions)
156 Figure 7.2.1(b) Dimensions for Existing Escalators (for Escalators Installed Under A17.1-1965 Through A17.1-1981)
157 Figure 7.2.1(c) Relationship of Escalator Parts (for Escalators Installed Under A17.1a-1982 and Later Editions)
Figure 7.2.3 Checking Incline
158 7.3.2 Periodic Test
7.3.3 Acceptance
7.3.4 References
ITEM 7.4 ENTRANCE AND EGRESS ENDS
7.4.1 Periodic Inspections
7.4.2 Periodic Test
7.4.3 Acceptance
7.4.4 References
ITEM 7.5 LIGHTING
7.5.1 Periodic Inspections
Figure 7.4.1 Safety Zone
159 7.5.2 Periodic Test
7.5.3 Acceptance
7.5.4 References
ITEM 7.6 CAUTION SIGNS
7.6.1 Periodic Inspections
7.6.2 Periodic Test
7.6.3 Acceptance
7.6.4 References
ITEM 7.7 COMBPLATE AND COMB STEP IMPACT DEVICE
7.7.1 Periodic Inspections
7.7.2 Periodic Test
160 7.7.3 Acceptance
7.7.4 References
ITEM 7.8 DECK BARRICADES AND ANTISLIDE DEVICES
7.8.1 Periodic Inspections
Figure 7.7.1 Checking Step/Combplate Mesh
161 7.8.2 Periodic Test
7.8.3 Acceptance
7.8.4 References
Figure 7.7.3 Test of Combplate/Landing Plate Assembly
162 Figure 7.8.1(a) Deck Barricade
Figure 7.8.1(b) High-Deck Balustrade Antislide Devices
163 ITEM 7.9 STEPS AND UPTHRUST DEVICE
7.9.1 Periodic Inspections
Figure 7.9.1(a) Smooth Riser
164 Figure 7.9.1(b) Cleated Riser
Figure 7.9.1(c) Escalator Step Riser
165 7.9.2 Periodic Test
7.9.3 Acceptance
7.9.4 References
ITEM 7.10 OPERATING AND SAFETY DEVICES
7.10.1 Periodic Inspections
Figure 7.9.1(d) Escalator Step Tread [A17.1-1955 Through A17.1-1990, Rule 802.5 (Requirement 6.1.3.5)]
166 Figure 7.9.3 Example of Two Flat Steps
167 7.10.2 Periodic Test
7.10.3 Acceptance
7.10.4 References
ITEM 7.11 SKIRT-OBSTRUCTION DEVICE
7.11.1 Periodic Inspections
7.11.2 Periodic Test
7.11.3 Acceptance
7.11.4 References
ITEM 7.12 (RESERVED)
ITEM 7.13 EGRESS RESTRICTION (ROLLING SHUTTER) DEVICE
7.13.1 Periodic Inspections
168 Figure 7.11.2 Typical Skirt-Obstruction Device
169 7.13.2 Periodic Test
7.13.3 Acceptance
7.13.4 References
ITEM 7.14 SPEED
7.14.1 Periodic Inspections
7.14.2 Periodic Test
7.14.3 Acceptance
7.14.4 References
ITEM 7.15 BALUSTRADES
7.15.1 Periodic Inspections
7.15.2 Periodic Test
7.15.3 Acceptance
7.15.4 References
ITEM 7.16 CEILING INTERSECTION GUARDS
7.16.1 Periodic Inspections
170 7.16.2 Periodic Test
7.16.3 Acceptance
7.16.4 References
ITEM 7.17 STEP/SKIRT CLEARANCES, PANELS, AND PERFORMANCE INDEX
7.17.1 Periodic Inspections
Figure 7.16.1 Ceiling or Soffit Guard [Requirements 6.1.3.3.9 and 6.2.3.3.7 (Rules 802.3g and 902.3g)]
171 7.17.2 Periodic Test
Figure 7.17.1 Measuring Gap Between Step and Skirt
172 7.17.3 Acceptance
7.17.4 References
ITEM 7.18 OUTDOOR PROTECTION
7.18.1 Periodic Inspections
7.18.2 Periodic Test
7.18.3 Acceptance
Figure 7.17.2 Angle of Skirt Panel
173 7.18.4 References
ITEM 7.19 MAINTENANCE RECORDS
7.19.1 Periodic Inspections
7.19.2 Periodic Test
7.19.3 Acceptance
7.19.4 References
Figure 7.18.3 Escalator Cover Overlap
174 ITEM 7.20 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
7.20.1 Periodic Inspections
7.20.2 Periodic Test
7.20.3 Acceptance
7.20.4 References
175 Part 8 Escalator — Internal
ITEM 8.1 MACHINERY SPACE ACCESS, LIGHTING, RECEPTACLE, AND CONDITION
8.1.1 Periodic Inspections
8.1.2 Periodic Test
8.1.3 Acceptance
8.1.4 References
ITEM 8.2 MACHINERY SPACE STOP SWITCHES AND INSPECTION CONTROL
8.2.1 Periodic Inspections
176 8.2.2 Periodic Test
8.2.3 Acceptance
8.2.4 References
ITEM 8.3 CONTROLLER AND WIRING
8.3.1 Periodic Inspections
8.3.2 Periodic Test
8.3.3 Acceptance
8.3.4 References
177 ITEM 8.4 DRIVE MACHINE AND BRAKE
8.4.1 Periodic Inspections
8.4.2 Periodic Test
178 8.4.3 Acceptance
8.4.4 References
ITEM 8.5 SPEED GOVERNOR
8.5.1 Periodic Inspections
8.5.2 Periodic Test
8.5.3 Acceptance
8.5.4 References
ITEM 8.6 BROKEN DRIVE CHAIN DEVICE AND DISCONNECTED MOTOR SAFETY DEVICE
8.6.1 Periodic Inspections
8.6.2 Periodic Test
179 8.6.3 Acceptance
8.6.4 References
ITEM 8.7 REVERSAL STOP SWITCH
8.7.1 Periodic Inspections
8.7.2 Periodic Test
8.7.3 Acceptance
8.7.4 References
ITEM 8.8 BROKEN STEP CHAIN DEVICE
8.8.1 Periodic Inspections
8.8.2 Periodic Test
8.8.3 Acceptance
8.8.4 References
ITEM 8.9 STEP UPTHRUST DEVICE
8.9.1 Periodic Inspections
8.9.2 Periodic Test
180 8.9.3 Acceptance
8.9.4 References
ITEM 8.10 MISSING STEP DEVICE
8.10.1 Periodic Inspections
8.10.2 Periodic Test
8.10.3 Acceptance
8.10.4 References
ITEM 8.11 STEP LEVEL DEVICE
8.11.1 Periodic Inspections
8.11.2 Periodic Test
Figure 8.9.2 Typical Step Upthrust Device
181 8.11.3 Acceptance
8.11.4 References
ITEM 8.12 STEPS, STEP CHAINS, AND TRUSSES
8.12.1 Periodic Inspections
8.12.2 Periodic Test
Figure 8.12.2 Positioning of Steps for Inspection of Truss
182 8.12.3 Acceptance
8.12.4 References
ITEM 8.13 HANDRAIL SYSTEMS AND SAFETY DEVICES
8.13.1 Periodic Inspections
8.13.2 Periodic Test
183 8.13.3 Acceptance
8.13.4 References
ITEM 8.14 CODE DATA PLATE
8.14.1 Periodic Inspections
8.14.2 Periodic Test
8.14.3 Acceptance
8.14.4 References
ITEM 8.15 RESPONSE TO SMOKE DETECTORS
8.15.1 Periodic Inspections
8.15.2 Periodic Test
8.15.3 Acceptance
8.15.4 References
ITEM 8.16 STEP LATERAL DISPLACEMENT DEVICE
8.16.1 Periodic Inspections
8.16.2 Periodic Test
8.16.3 Acceptance
8.16.4 References
ITEM 8.17 INSPECTION CONTROL
8.17.1 Periodic Inspections
8.17.2 Periodic Test
184 8.17.3 Acceptance
8.17.4 References
ITEM 8.18 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
8.18.1 Periodic Inspections
8.18.2 Periodic Test
8.18.3 Acceptance
8.18.4 References
185 Part 9 Moving Walk — External
ITEM 9.1 GENERAL FIRE PROTECTION
9.1.1 Periodic Inspections
9.1.2 Periodic Test
9.1.3 Acceptance
9.1.4 References
ITEM 9.2 GEOMETRY
9.2.1 Periodic Inspections
9.2.2 Periodic Test
9.2.3 Acceptance
9.2.4 References
186 Figure 9.2.1(a) Moving Walk Geometry (for Moving Walks Installed Under A17.1-1965 Through A17.1b-1980)
187 Figure 9.2.1(b) Moving Walk Geometry (for Moving Walks Installed Under A17.1-1981 Through A17.1a-1991)
Figure 9.2.3 Maximum Treadway Angle
188 ITEM 9.3 HANDRAILS
9.3.1 Periodic Inspections
9.3.2 Periodic Test
Table 9.2.3(a) Treadway Width (A17.1-1965 Through A17.1d-1970)
Table 9.2.3(b) Treadway Width (A17.1-1971 and Later Editions)
Table 9.2.3(c) Minimum Treadway Width
189 9.3.3 Acceptance
9.3.4 References
ITEM 9.4 ENTRANCE AND EGRESS ENDS
9.4.1 Periodic Inspections
9.4.2 Periodic Test
9.4.3 Acceptance
9.4.4 References
ITEM 9.5 LIGHTING
9.5.1 Periodic Inspections
9.5.2 Periodic Test
9.5.3 Acceptance
9.5.4 References
ITEM 9.6 CAUTION SIGNS
9.6.1 Periodic Inspections
190 9.6.2 Periodic Test
9.6.3 Acceptance
9.6.4 References
ITEM 9.7 COMBPLATE AND COMB STEP IMPACT DEVICE
9.7.1 Periodic Inspections
9.7.2 Periodic Test
9.7.3 Acceptance
Figure 9.3.3 Moving Walk Handrail Extension (A17.1-1971 and Later Editions)
191 9.7.4 References
ITEM 9.8 DECK BARRICADES
9.8.1 Periodic Inspections
9.8.2 Periodic Test
9.8.3 Acceptance
9.8.4 References
ITEM 9.9 TREADWAYS
9.9.1 Periodic Inspections
192 9.9.2 Periodic Test
9.9.3 Acceptance
9.9.4 References
ITEM 9.10 OPERATING AND SAFETY DEVICES
9.10.1 Periodic Inspections
Figure 9.9.1 Moving Walk Treadway Slots
193 9.10.2 Periodic Test
9.10.3 Acceptance
9.10.4 References
ITEM 9.11 (RESERVED)
ITEM 9.12 (RESERVED)
ITEM 9.13 EGRESS RESTRICTION (ROLLING SHUTTER) DEVICE
9.13.1 Periodic Inspections
9.13.2 Periodic Test
9.13.3 Acceptance
9.13.4 References
ITEM 9.14 SPEED
9.14.1 Periodic Inspections
Table 9.14.1(a) Treadway Speed (A17.1-1981 and Later Editions)
194 9.14.2 Periodic Test
9.14.3 Acceptance
9.14.4 References
ITEM 9.15 BALUSTRADES
9.15.1 Periodic Inspections
9.15.2 Periodic Test
9.15.3 Acceptance
9.15.4 References
Table 9.14.1(b) Treadway Speed at Point of Entrance or Exit (A17.1-1965 Through A17.1b-1980)
Table 9.14.1(c) Treadway Speed at Any Point on Treadway (A17.1-1965 Through A17.1b-1980)
195 ITEM 9.16 CEILING INTERSECTION GUARDS
9.16.1 Periodic Inspections
9.16.2 Periodic Test
9.16.3 Acceptance
9.16.4 References
Figure 9.15.1 Treadway Clearances
196 ITEM 9.17 SKIRT PANELS
9.17.1 Periodic Inspections
9.17.2 Periodic Test
9.17.3 Acceptance
9.17.4 References
ITEM 9.18 OUTDOOR PROTECTION
9.18.1 Periodic Inspections
9.18.2 Periodic Test
9.18.3 Acceptance
9.18.4 References
ITEM 9.19 MAINTENANCE RECORDS
9.19.1 Periodic Inspections
197 9.19.2 Periodic Test
9.19.3 Acceptance
9.19.4 References
ITEM 9.20 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
9.20.1 Periodic Inspections
9.20.2 Periodic Test
9.20.3 Acceptance
9.20.4 References
198 Part 10 Moving Walk — Internal
ITEM 10.1 MACHINERY SPACE ACCESS, LIGHTING, RECEPTACLE, AND CONDITION
10.1.1 Periodic Inspections
10.1.2 Periodic Test
10.1.3 Acceptance
10.1.4 References
ITEM 10.2 STOP SWITCH AND INSPECTION CONTROL
10.2.1 Periodic Inspections
10.2.2 Periodic Test
199 10.2.3 Acceptance
10.2.4 References
ITEM 10.3 CONTROLLER AND WIRING
10.3.1 Periodic Inspections
10.3.2 Periodic Test
10.3.3 Acceptance
10.3.4 References
200 ITEM 10.4 DRIVE MACHINE AND BRAKE
10.4.1 Periodic Inspections
10.4.2 Periodic Test
201 10.4.3 Acceptance
10.4.4 References
ITEM 10.5 SPEED GOVERNOR
10.5.1 Periodic Inspections
10.5.2 Periodic Test
10.5.3 Acceptance
10.5.4 References
ITEM 10.6 BROKEN DRIVE CHAIN DEVICE AND DISCONNECTED MOTOR SAFETY DEVICE
10.6.1 Periodic Inspections
10.6.2 Periodic Test
202 10.6.3 Acceptance
10.6.4 References
ITEM 10.7 REVERSAL STOP SWITCH
10.7.1 Periodic Inspections
10.7.2 Periodic Test
10.7.3 Acceptance
10.7.4 References
ITEM 10.8 BROKEN TREADWAY DEVICE
10.8.1 Periodic Inspections
10.8.2 Periodic Test
10.8.3 Acceptance
10.8.4 References
ITEM 10.9 (RESERVED)
ITEM 10.10 MISSING PALLET DEVICE
10.10.1 Periodic Inspections
10.10.2 Periodic Test
203 10.10.3 Acceptance
10.10.4 References
ITEM 10.11 PALLET LEVEL DEVICE
10.11.1 Periodic Inspections
10.11.2 Periodic Test
10.11.3 Acceptance
10.11.4 References
ITEM 10.12 PALLETS, PALLET CHAINS, AND TRUSSES
10.12.1 Periodic Inspections
10.12.2 Periodic Test
10.12.3 Acceptance
204 10.12.4 References
ITEM 10.13 HANDRAIL SYSTEMS AND SAFETY DEVICES
10.13.1 Periodic Inspections
10.13.2 Periodic Test
205 10.13.3 Acceptance
10.13.4 References
ITEM 10.14 CODE DATA PLATE
10.14.1 Periodic Inspections
10.14.2 Periodic Test
10.14.3 Acceptance
10.14.4 References
ITEM 10.15 RESPONSE TO SMOKE DETECTORS
10.15.1 Periodic Inspections
10.15.2 Periodic Test
10.15.3 Acceptance
10.15.4 References
ITEM 10.16 INSPECTION CONTROL
10.16.1 Periodic Inspections
10.16.2 Periodic Test
10.16.3 Acceptance
10.16.4 References
206 ITEM 10.17 EARTHQUAKE INSPECTION AND TESTS (SEISMIC RISK ZONE 2 OR GREATER)
10.17.1 Periodic Inspections
10.17.2 Periodic Test
10.17.3 Acceptance
10.17.4 References
207 Part 11 Elevator — Machine-Room-Less (MRL)
ITEM 11.1 ACCESS TO MACHINE ROOM/MACHINERY SPACE/CONTROL ROOM/CONTROL SPACE
11.1.1 Periodic Inspections
11.1.2 Periodic Test
11.1.3 Acceptance
11.1.4 References
ITEM 11.2 ACCESS DOOR AND OPENINGS
11.2.1 Periodic Inspections
11.2.2 Periodic Test
11.2.3 Acceptance
11.2.4 References
208 ITEM 11.3 ENCLOSURE OF ROOMS AND SPACES
11.3.1 Periodic Inspections
11.3.2 Periodic Test
11.3.3 Acceptance
11.3.4 References
ITEM 11.4 (RESERVED)
ITEM 11.5 MACHINE/CONTROL ROOMS CONTAINING OVERHEAD DRIVE MACHINES
11.5.1 Periodic Inspections
11.5.2 Periodic Test
11.5.3 Acceptance
11.5.4 References
ITEM 11.6 (RESERVED)
ITEM 11.7 DISCONNECTING MEANS
11.7.1 Periodic Inspections
11.7.2 Periodic Test
11.7.3 Acceptance
11.7.4 References
ITEM 11.8 REMOTE MACHINE ROOMS AND CONTROL ROOMS
11.8.1 Periodic Inspections
11.8.2 Periodic Test
11.8.3 Acceptance
11.8.4 References
209 ITEM 11.9 INSPECTION AND TEST PANELS
11.9.1 Periodic Inspections
11.9.2 Periodic Test
11.9.3 Acceptance
11.9.4 References
ITEM 11.10 (RESERVED)
ITEM 11.11 (RESERVED)
ITEM 11.12 TRACTION SHEAVES
11.12.1 Periodic Inspections
11.12.2 Periodic Test
11.12.3 Acceptance
11.12.4 References
ITEM 11.13 SECONDARY AND DEFLECTOR SHEAVES
11.13.1 Periodic Inspections
210 11.13.2 Periodic Test
11.13.3 Acceptance
11.13.4 References
ITEM 11.14 TERMINAL STOPPING DEVICES
11.14.1 Periodic Inspections
11.14.2 Periodic Test
11.14.3 Acceptance
11.14.4 References
ITEM 11.15 WORKING AREAS INSIDE THE HOISTWAY AND IN THE PIT
11.15.1 Periodic Inspections
11.15.2 Periodic Test
11.15.3 Acceptance
211 11.15.4 References
ITEM 11.16 LOCATION OF MACHINERY SPACES, MACHINE ROOMS, CONTROL SPACES, CONTROL ROOMS, AND EQUIPMENT
11.16.1 Periodic Inspections
11.16.2 Periodic Test
11.16.3 Acceptance
11.16.4 References
ITEM 11.17 HYDRAULIC ELEVATORS — SHUTOFF/MANUAL LOWERING VALVES
11.17.1 Periodic Inspections
11.17.2 Periodic Test
11.17.3 Acceptance
11.17.4 References
ITEM 11.18 HYDRAULIC ELEVATORS — PRESSURE GAGE FITTINGS
11.18.1 Periodic Inspections
11.18.2 Periodic Test
11.18.3 Acceptance
11.18.4 References
ITEM 11.19 HYDRAULIC ELEVATORS — ATMOSPHERE STORAGE AND DISCHARGE TANKS
11.19.1 Periodic Inspections
11.19.2 Periodic Test
212 11.19.3 Acceptance
11.19.4 References
ITEM 11.20 HYDRAULIC ELEVATORS — PRESSURE PIPING
11.20.1 Periodic Inspections
11.20.2 Periodic Test
11.20.3 Acceptance
11.20.4 References
ITEM 11.21 EXPLANATORY FIGURES FOR DEFINITIONS OF ELEVATOR MACHINERY SPACE, MACHINE ROOM, CONTROL SPACE, CONTROL ROOM, REMOTE MACHINE ROOM, OR REMOTE CONTROL ROOM
ITEM 11.22 INSPECTION OPERATION AND HOISTWAY ACCESS SWITCH OPERATION HIERARCHY
Figure 11.21(a) Configuration A
Figure 11.21(b) Configuration B
Figure 11.21(c) Configuration C
213 Figure 11.21(d) Configuration D
Figure 11.21(e) Configuration E
214 Figure 11.21(f) Configuration F
Table 11.21 Definitions of Elevator Machinery Space, Machine Room, Control Space, Control Room, Remote Machine Room, or Remote Control Room
215 Table 11.22 Inspection Operation and Hoistway Access Switch Operation Hierarchy
216 Part 12 Dumbwaiter — Car
ITEM 12.1 DOOR REOPENING DEVICE
12.1.1 Periodic Inspections
12.1.2 Periodic Test
12.1.3 Acceptance
12.1.4 References
ITEM 12.2 OPERATING CONTROL DEVICES
12.2.1 Periodic Inspections
12.2.2 Periodic Test
12.2.3 Acceptance
12.2.4 References
ITEM 12.3 SILLS AND CAR FLOOR
12.3.1 Periodic Inspections
12.3.2 Periodic Test
12.3.3 Acceptance
217 12.3.4 References
ITEM 12.4 CAR LIGHTING
12.4.1 Periodic Inspections
12.4.2 Periodic Test
12.4.3 Acceptance
12.4.4 References
ITEM 12.5 CAR DOOR OR GATE
12.5.1 Periodic Inspections
12.5.2 Periodic Test
12.5.3 Acceptance
12.5.4 References
ITEM 12.6 POWER CLOSING OF DOORS OR GATES
12.6.1 Periodic Inspections
12.6.2 Periodic Test
12.6.3 Acceptance
12.6.4 References
ITEM 12.7 POWER OPENING OF DOORS OR GATES
12.7.1 Periodic Inspections
12.7.2 Periodic Test
12.7.3 Acceptance
12.7.4 References
218 ITEM 12.8 CAR VISION PANELS
12.8.1 Periodic Inspections
12.8.2 Periodic Test
12.8.3 Acceptance
12.8.4 References
ITEM 12.9 CAR ENCLOSURE
12.9.1 Periodic Inspections
12.9.2 Periodic Test
12.9.3 Acceptance
12.9.4 References
ITEM 12.10 SIGNS AND OPERATING DEVICE SYMBOLS
12.10.1 Periodic Inspections
12.10.2 Periodic Test
12.10.3 Acceptance
12.10.4 References
ITEM 12.11 RATED LOAD, PLATFORM VOLUME, AND DATA CAPACITY PLATE
12.11.1 Periodic Inspections
12.11.2 Periodic Test
12.11.3 Acceptance
12.11.4 References
ITEM 12.12 CAR RIDE
12.12.1 Periodic Inspections
12.12.2 Periodic Test
12.12.3 Acceptance
12.12.4 References
219 Part 13 Dumbwaiter — Machinery Space, Machine Room, Control Space, and Control Room
ITEM 13.1 ACCESS TO EQUIPMENT SPACE
13.1.1 Periodic Inspections
13.1.2 Periodic Test
13.1.3 Acceptance
13.1.4 References
ITEM 13.2 HEADROOM
13.2.1 Periodic Inspections
13.2.2 Periodic Test
13.2.3 Acceptance
13.2.4 References
ITEM 13.3 LIGHTING AND RECEPTACLES
13.3.1 Periodic Inspections
13.3.2 Periodic Test
13.3.3 Acceptance
13.3.4 References
ITEM 13.4 MACHINERY SPACE, MACHINE ROOM, CONTROL SPACE, AND CONTROL ROOM
13.4.1 Periodic Inspections
13.4.2 Periodic Test
13.4.3 Acceptance
13.4.4 References
220 ITEM 13.5 HOUSEKEEPING
13.5.1 Periodic Inspections
13.5.2 Periodic Test
13.5.3 Acceptance
13.5.4 References
ITEM 13.6 VENTILATION
13.6.1 Periodic Inspections
13.6.2 Periodic Test
13.6.3 Acceptance
13.6.4 References
ITEM 13.7 FIRE EXTINGUISHER
13.7.1 Periodic Inspections
13.7.2 Periodic Test
13.7.3 Acceptance
13.7.4 References
ITEM 13.8 PIPES, WIRING, AND DUCTS
13.8.1 Periodic Inspections
13.8.2 Periodic Test
13.8.3 Acceptance
13.8.4 References
ITEM 13.9 GUARDING OF EQUIPMENT
13.9.1 Periodic Inspections
13.9.2 Periodic Test
13.9.3 Acceptance
13.9.4 References
221 ITEM 13.10 NUMBERING OF DUMBWAITERS, MACHINES, AND DISCONNECT SWITCHES
13.10.1 Periodic Inspections
13.10.2 Periodic Test
13.10.3 Acceptance
13.10.4 References
ITEM 13.11 DISCONNECTING MEANS AND CONTROL
13.11.1 Periodic Inspections
13.11.2 Periodic Test
13.11.3 Acceptance
13.11.4 References
ITEM 13.12 CONTROLLER WIRING, FUSES, GROUNDING, ETC.
13.12.1 Periodic Inspections
13.12.2 Periodic Test
13.12.3 Acceptance — Inspection Made With Power Off
13.12.4 References
ITEM 13.13 GOVERNOR
13.13.1 Periodic Inspections
13.13.2 Periodic Test
13.13.3 Acceptance
13.13.4 References
222 ITEM 13.14 CODE DATA PLATE
13.14.1 Periodic Inspections
13.14.2 Periodic Test
13.14.3 Acceptance
13.14.4 References
ITEM 13.15 OVERHEAD BEAM AND FASTENINGS
13.15.1 Periodic Inspections
13.15.2 Periodic Test
13.15.3 Acceptance
13.15.4 References
ITEM 13.16 DRIVE MACHINE BRAKE
13.16.1 Periodic Inspections
13.16.2 Periodic Test
13.16.3 Acceptance
13.16.4 References
ITEM 13.17 TRACTION DRIVE MACHINES
13.17.1 Periodic Inspections
13.17.2 Periodic Test
13.17.3 Acceptance
13.17.4 References
ITEM 13.18 GEARS, BEARINGS, AND FLEXIBLE COUPLINGS
13.18.1 Periodic Inspections
13.18.2 Periodic Test
13.18.3 Acceptance
13.18.4 References
223 ITEM 13.19 WINDING DRUM MACHINE
13.19.1 Periodic Inspections
13.19.2 Periodic Test
13.19.3 Acceptance
13.19.4 References
ITEM 13.20 CHAIN DRIVE MACHINE AND DRIVE SPROCKETS
13.20.1 Periodic Inspections
13.20.2 Periodic Test
13.20.3 Acceptance
13.20.4 References
ITEM 13.21 ABSORPTION OF REGENERATED POWER
13.21.1 Periodic Inspections
13.21.2 Periodic Test
13.21.3 Acceptance
13.21.4 References
ITEM 13.22 AC DRIVE FROM A DC SOURCE
13.22.1 Periodic Inspections
13.22.2 Periodic Test
13.22.3 Acceptance
224 13.22.4 References
ITEM 13.23 TRACTION SHEAVES
13.23.1 Periodic Inspections
13.23.2 Periodic Test
13.23.3 Acceptance
13.23.4 References
ITEM 13.24 SECONDARY AND DEFLECTOR SHEAVES OR SPROCKETS
13.24.1 Periodic Inspections
13.24.2 Periodic Test
13.24.3 Acceptance
13.24.4 References
ITEM 13.25 ROPE AND CHAIN FASTENINGS
13.25.1 Periodic Inspections
13.25.2 Periodic Test
13.25.3 Acceptance
13.25.4 References
ITEM 13.26 TERMINAL STOPPING DEVICES
13.26.1 Periodic Inspections
13.26.2 Periodic Test
13.26.3 Acceptance
13.26.4 References
225 ITEM 13.27 CAR AND COUNTERWEIGHT SAFETIES
13.27.1 Periodic Inspections
13.27.2 Periodic Test
13.27.3 Acceptance
13.27.4 References
ITEM 13.28 HYDRAULIC POWER UNIT
13.28.1 Periodic Inspections
13.28.2 Periodic Test
13.28.3 Acceptance
13.28.4 References
ITEM 13.29 RELIEF VALVES
13.29.1 Periodic Inspections
13.29.2 Periodic Test
13.29.3 Acceptance
13.29.4 References
226 ITEM 13.30 CONTROL VALVE
13.30.1 Periodic Inspections
13.30.2 Periodic Test
13.30.3 Acceptance
13.30.4 References
ITEM 13.31 TANKS
13.31.1 Periodic Inspections
13.31.2 Periodic Test
13.31.3 Acceptance
13.31.4 References
ITEM 13.32 FLEXIBLE HYDRAULIC HOSES AND FITTING ASSEMBLIES
13.32.1 Periodic Inspections
13.32.2 Periodic Test
13.32.3 Acceptance
13.32.4 References
ITEM 13.33 SUPPLY LINE AND SHUTOFF VALVE
13.33.1 Periodic Inspections
13.33.2 Periodic Test
13.33.3 Acceptance
13.33.4 References
ITEM 13.34 HYDRAULIC CYLINDERS
13.34.1 Periodic Inspections
13.34.2 Periodic Test
13.34.3 Acceptance
227 13.34.4 References
ITEM 13.35 PRESSURE SWITCH
13.35.1 Periodic Inspections
13.35.2 Periodic Test
13.35.3 Acceptance
13.35.4 References
ITEM 13.36 CONTROLS FOR HYDRAULIC AND ROPE OR CHAIN HYDRAULIC DUMBWAITERS
13.36.1 Periodic Inspections
13.36.2 Periodic Test
13.36.3 Acceptance
13.36.4 References
228 Part 14 Dumbwaiter — Top of Car
ITEM 14.1 TOP-OF-CAR SWITCH
14.1.1 Periodic Inspections
14.1.2 Periodic Test
14.1.3 Acceptance
14.1.4 References
ITEM 14.2 TOP-OF-CAR OPERATING DEVICE
14.2.1 Periodic Inspections
14.2.2 Periodic Test
14.2.3 Acceptance
14.2.4 References
ITEM 14.3 TOP-OF-CAR CLEARANCE AND REFUGE SPACE
14.3.1 Periodic Inspections
14.3.2 Periodic Test
14.3.3 Acceptance
14.3.4 References
ITEM 14.4 NORMAL TERMINAL STOPPING DEVICE
14.4.1 Periodic Inspections
14.4.2 Periodic Test
14.4.3 Acceptance
229 14.4.4 References
ITEM 14.5 FINAL TERMINAL STOPPING AND TERMINAL SPEED-REDUCING DEVICES
14.5.1 Periodic Inspections
14.5.2 Periodic Test
14.5.3 Acceptance
14.5.4 References
ITEM 14.6 CAR LEVELING AND ANTICREEP DEVICES
14.6.1 Periodic Inspections
14.6.2 Periodic Test
14.6.3 Acceptance
14.6.4 References
230 ITEM 14.7 HOISTWAY CONSTRUCTION
14.7.1 Periodic Inspections
14.7.2 Periodic Test
14.7.3 Acceptance
14.7.4 References
ITEM 14.8 PIPES, WIRING, AND DUCTS
14.8.1 Periodic Inspections
14.8.2 Periodic Test
14.8.3 Acceptance
14.8.4 References
ITEM 14.9 WINDOWS, PROJECTIONS, RECESSES, AND SETBACKS
14.9.1 Periodic Inspections
14.9.2 Periodic Test
14.9.3 Acceptance
14.9.4 References
ITEM 14.10 HOISTWAY CLEARANCE
14.10.1 Periodic Inspections
14.10.2 Periodic Test
14.10.3 Acceptance
14.10.4 References
ITEM 14.11 MULTIPLE HOISTWAYS
14.11.1 Periodic Inspections
14.11.2 Periodic Test
14.11.3 Acceptance
14.11.4 References
ITEM 14.12 TRAVELING CABLES AND JUNCTION BOXES
14.12.1 Periodic Inspections
14.12.2 Periodic Test
14.12.3 Acceptance
14.12.4 References
231 ITEM 14.13 DOOR AND GATE EQUIPMENT
14.13.1 Periodic Inspections
14.13.2 Periodic Test
14.13.3 Acceptance
14.13.4 References
ITEM 14.14 CAR FRAME AND STILES
14.14.1 Periodic Inspections
14.14.2 Periodic Test
14.14.3 Acceptance
14.14.4 References
ITEM 14.15 GUIDE RAILS, FASTENING, AND EQUIPMENT
14.15.1 Periodic Inspections
14.15.2 Periodic Test
14.15.3 Acceptance
14.15.4 References
ITEM 14.16 GOVERNOR ROPE
14.16.1 Periodic Inspections
14.16.2 Periodic Test
14.16.3 Acceptance
14.16.4 References
ITEM 14.17 WIRE ROPE OR CHAIN FASTENING AND HITCH PLATE
14.17.1 Periodic Inspections
14.17.2 Periodic Test
14.17.3 Acceptance
14.17.4 References
ITEM 14.18 SUSPENSION ROPE OR CHAIN
14.18.1 Periodic Inspections
14.18.2 Periodic Test
14.18.3 Acceptance
232 14.18.4 References
ITEM 14.19 TOP COUNTERWEIGHT CLEARANCE
14.19.1 Periodic Inspections
14.19.2 Periodic Test
14.19.3 Acceptance
14.19.4 References
ITEM 14.20 CAR, OVERHEAD, AND DEFLECTOR SHEAVES
14.20.1 Periodic Inspections
14.20.2 Periodic Test
14.20.3 Acceptance
14.20.4 References
ITEM 14.21 BROKEN ROPE, CHAIN, OR TAPE SELECTOR SWITCH
14.21.1 Periodic Inspections
14.21.2 Periodic Test
14.21.3 Acceptance
14.21.4 References
ITEM 14.22 DATA PLATES
14.22.1 Periodic Inspections
14.22.2 Periodic Test
14.22.3 Acceptance
14.22.4 References
ITEM 14.23 COUNTERWEIGHT AND COUNTERWEIGHT BUFFER
14.23.1 Periodic Inspections
14.23.2 Periodic Test
14.23.3 Acceptance
14.23.4 References
233 ITEM 14.24 COUNTERWEIGHT SAFETY
14.24.1 Periodic Inspections
14.24.2 Periodic Test
14.24.3 Acceptance
14.24.4 References
ITEM 14.25 SPEED TEST
14.25.1 Periodic Inspections
14.25.2 Periodic Test
14.25.3 Acceptance
14.25.4 References
ITEM 14.26 SLACK ROPE OR SLACK CHAIN DEVICE
14.26.1 Periodic Inspections
14.26.2 Periodic Test
14.26.3 Acceptance
14.26.4 References
ITEM 14.27 TRAVELING SHEAVE
ITEM 14.28 COMPENSATING ROPES OR CHAINS
14.28.1 Periodic Inspections
14.28.2 Periodic Test
14.28.3 Acceptance
14.28.4 References
234 Part 15 Dumbwaiter — Outside Hoistway
ITEM 15.1 CAR GUARDS
15.1.1 Periodic Inspections
15.1.2 Periodic Test
15.1.3 Acceptance
15.1.4 References
ITEM 15.2 HOISTWAY DOORS
15.2.1 Periodic Inspections
15.2.2 Periodic Test
15.2.3 Acceptance
15.2.4 References
ITEM 15.3 VISION PANELS
15.3.1 Periodic Inspections
15.3.2 Periodic Test
15.3.3 Acceptance
15.3.4 References
ITEM 15.4 HOISTWAY DOOR-LOCKING DEVICES
15.4.1 Periodic Inspections
15.4.2 Periodic Test
15.4.3 Acceptance
235 15.4.4 References
ITEM 15.5 ACCESS TO HOISTWAY
15.5.1 Periodic Inspections
15.5.2 Periodic Test
15.5.3 Acceptance
15.5.4 References
ITEM 15.6 POWER CLOSING OF HOISTWAY DOORS
15.6.1 Periodic Inspections
15.6.2 Periodic Test
15.6.3 Acceptance
15.6.4 References
ITEM 15.7 HOISTWAY ENCLOSURE
15.7.1 Periodic Inspections
15.7.2 Periodic Test
15.7.3 Acceptance
15.7.4 References
ITEM 15.8 SEPARATE COUNTERWEIGHT HOISTWAY
15.8.1 Periodic Inspections
15.8.2 Periodic Test
15.8.3 Acceptance
15.8.4 References
236 Part 16 Dumbwaiter — Pit
ITEM 16.1 PIT ACCESS, LIGHTING, STOP SWITCH, AND CONDITION
16.1.1 Periodic Inspections
16.1.2 Periodic Test
16.1.3 Acceptance
16.1.4 References
ITEM 16.2 BOTTOM CLEARANCE AND RUNBY
16.2.1 Periodic Inspections
16.2.2 Periodic Test
16.2.3 Acceptance
16.2.4 References
ITEM 16.3 FINAL AND EMERGENCY TERMINAL STOPPING DEVICES
ITEM 16.4 NORMAL TERMINAL STOPPING DEVICES
ITEM 16.5 TRAVELING CABLES
16.5.1 Periodic Inspections
16.5.2 Periodic Test
16.5.3 Acceptance
16.5.4 References
ITEM 16.6 GOVERNOR-ROPE TENSION DEVICE
16.6.1 Periodic Inspections
16.6.2 Periodic Test
16.6.3 Acceptance
16.6.4 References
ITEM 16.7 CAR FRAME AND PLATFORM
237 ITEM 16.8 CAR SAFETIES AND GUIDING MEMBERS
16.8.1 Periodic Inspections
16.8.2 Periodic Test
16.8.3 Acceptance
16.8.4 References
ITEM 16.9 BUFFER
16.9.1 Periodic Inspections
16.9.2 Periodic Test
16.9.3 Acceptance
16.9.4 References
ITEM 16.10 PLUNGER AND CYLINDER
16.10.1 Periodic Inspections
16.10.2 Periodic Test
16.10.3 Acceptance
16.10.4 References
ITEM 16.11 CAR BUFFER
ITEM 16.12 GUIDING MEMBERS
16.12.1 Periodic Inspections
16.12.2 Periodic Test
16.12.3 Acceptance
16.12.4 References
ITEM 16.13 SUPPLY PIPING
16.13.1 Periodic Inspections
16.13.2 Periodic Test
16.13.3 Acceptance
16.13.4 References
238 MANDATORY APPENDICES
MANDATORY APPENDIX I GUIDE FOR INSPECTION OF INCLINED ELEVATORS
239 Part I-1 Inclined Elevator — Inside of Car
241 Figure I-1.16.3.3 Net Platform Area Measurements
242 Part I-2 Inclined Elevator — Machine Room
244 Figure I-2.13.2.3(a) Static Governor-Rope Drive
Figure I-2.13.2.3(b) Wheel-Driven Governor
Figure I-2.28.2.3 Retractable Sill
245 Part I-3 Inclined Elevator — Top-of-Car/Uphill Emergency Exit/End-Loading Top-of-Car Door
246 Figure I-3.4 Uphill Clearance
250 Part I-4 Inclined Elevator — Outside Hoistway
251 Figure I-4.1 Car Platform Guard
252 Part I-5 Inclined Elevator — Pit
254 Figure I-5.1.1.3 Pits and Work Spaces
Figure I-5.2.1.3 Refuge Space When Conformance to A17.1/B44, Requirement 2.4.1 Is Not Provided
255 Part I-6 Inclined Elevator — Firefighters’ Service
258 MANDATORY APPENDIX II GUIDE FOR INSPECTION OF PRIVATE RESIDENCE ELECTRIC AND HYDRAULIC ELEVATORS
259 Part II-1 Private Residence Elevator — Inside of Car
261 Table II-1.7.3 Maximum Distance Between Hoistway Face of Landing Door and Car Door or Gate, Private Residence Elevator (A17.1-2016/B44-16 and Later Editions)
263 Part II-2 Private Residence Elevator — Machine Room or Machinery Space
270 Part II-3 Private Residence Elevator — Top of Car
274 Part II-4 Private Residence Elevator — Outside Hoistway
276 Part II-5 Private Residence Elevator — Pit
278 MANDATORY APPENDIX III GUIDE FOR INSPECTION OF PRIVATE RESIDENCE INCLINED ELEVATORS
279 Part III-1 Private Residence Inclined Elevators — Inside of Car
281 Part III-2 Private Residence Inclined Elevators — Machine Room
282 Part III-3 Private Residence Inclined Elevators — Top of Car
283 Part III-4 Private Residence Inclined Elevators — Outside Hoistway
285 NONMANDATORY APPENDICES
NONMANDATORY APPENDIX A INSPECTION CHECKLISTS
286 Table A-1 Checklist for Electric Elevators
301 Table A-2 Checklist for Hydraulic Elevators
315 Table A-3 Checklist for Escalators
319 Table A-4 Checklist for Moving Walks
322 NONMANDATORY APPENDIX B ACCEPTANCE CHECKLISTS
398 NONMANDATORY APPENDIX C GUIDELINES FOR CSA B44.1/ASME A17.5-2004
C-1 GENERAL
C-2 GUIDELINES FOR ELECTRICAL DEVICES REQUIRING LABELING/MARKING
400 NONMANDATORY APPENDIX D CHECKLISTS FOR ELECTRIC AND HYDRAULIC ELEVATORS, ESCALATORS, AND MOVING WALKS
439 NONMANDATORY APPENDIX E CHECKLISTS AND REPORTS FOR INSPECTION OF ELECTRIC AND HYDRAULIC ELEVATORS, ESCALATORS, AND MOVING WALKS
444 NONMANDATORY APPENDIX F INSPECTION CHECKLISTS FOR LIMITED-USE/LIMITED-APPLICATION ELECTRIC AND HYDRAULIC ELEVATORS
464 Table G-1 Guidelines for Mass and Closing Time of Elevator Horizontally Sliding Doors (See A17.1/B44, Requirements 2.13.4.2.4, 8.6.3.8, 8.6.4.19.8, and 8.6.5.14.6.)
NONMANDATORY APPENDIX G GUIDE FOR TYPICAL DOOR CLOSING TIMES
465 NONMANDATORY APPENDIX H EXAMPLES OF SUSPENSION MEMBER TENSION MEASUREMENT DATA AND CALCULATIONS FOR ADJUSTMENT
H-1 EXAMPLE 1: FIVE-SUSPENSION-MEMBER SYSTEM
H-2 EXAMPLE 2: SEVEN-SUSPENSION-MEMBER SYSTEM
466 NONMANDATORY APPENDIX I ACCEPTANCE CHECKLIST FOR OCCUPANT EVACUATION OPERATION (A17.1-2013/B44-13)
473 NONMANDATORY APPENDIX J ACCEPTANCE CHECKLIST FOR STANDBY/EMERGENCY POWER

Related products

ASME A17.2 2020
$98.04