ASME B107.100 2020
$98.04
ASME B107.100-2020: Flat Wrenches
| Published By | Publication Date | Number of Pages |
| ASME | 2020 | 57 |
This Standard provides the general, dimensional, performance, and safety requirements for combination wrenches. Inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. B107.100-2010 is a consolidation and update of B107.6, B107.9, B107.39 and B107.40. It also includes three new sections B107.8, B107.21 and B107.66.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | CONTENTS |
| 6 | FOREWORD |
| 7 | ASME B107 COMMITTEE ROSTER |
| 8 | CORRESPONDENCE WITH THE B107 COMMITTEE |
| 10 | 1 SCOPE 2 DEFINITIONS 3 REFERENCES |
| 11 | 4 CLASSIFICATION 5 PERFORMANCE REQUIREMENTS 5.1 Design — Categories 6, 9, 39, and 40 Tables Table 4-1 Flat Wrenches |
| 12 | 5.2 Design — Category 8: Adjustable Wrenches 5.3 Design — Category 21: Crowfoot Wrench Figures Figure 5.1.1-1 Category 6 Combination Wrench |
| 13 | Table 5.1.1-1 Category 6 Combination Wrench (U.S. Customary) |
| 14 | Table 5.1.1-1M Category 6 Combination Wrench (Metric) |
| 15 | Table 5.1.1-2 Category 6 Lengths (U.S. Customary) |
| 16 | Table 5.1.1-2M Category 6 Lengths (Metric) |
| 17 | Figure 5.1.2-1 Category 9, Type I Box Wrench Figure 5.1.2-2 Category 9, Type I Box Wrench (Alternate Construction) |
| 18 | Figure 5.1.2-3 Category 9, Type II Box Wrench |
| 19 | Figure 5.1.2-4 Category 9, Type III Box Wrench |
| 20 | Table 5.1.2-1 Category 9 Box Wrench (U.S. Customary) |
| 21 | Table 5.1.2-1M Category 9 Box Wrench (Metric) |
| 22 | Table 5.1.2-2 Category 9 Lengths (U.S. Customary) |
| 23 | 5.4 Design — Category 66: Ratcheting Box Wrench 5.5 Wrench Openings Table 5.1.2-2M Category 9 Lengths (Metric) |
| 24 | 5.6 Materials 5.7 Markings 5.8 Hardness 5.9 Finish Figure 5.1.3-1 Category 39, Type I Engineer’s Wrench |
| 25 | Figure 5.1.3-2 Category 39, Type II, Class 1 Angle Wrench |
| 26 | Figure 5.1.3-3 Category 39, Type II, Classes 2 and 3 Angle Wrench Figure 5.1.3-4 Category 39, Type III Tappet Wrench |
| 27 | Table 5.1.3-1 Category 39 Open-End Wrench (U.S. Customary) |
| 28 | Table 5.1.3-1M Category 39 Open-End Wrench (Metric) |
| 29 | Table 5.1.3-2 Category 39, Type I Lengths (U.S. Customary) Table 5.1.3-2M Category 39, Type I Lengths (Metric) |
| 30 | Table 5.1.3-3 Category 39, Type II, Class 1 Lengths (U.S. Customary) Table 5.1.3-3M Category 39, Type II, Class 1 Lengths (Metric) |
| 31 | Table 5.1.3-4 Category 39, Type II, Class 2 Lengths (U.S. Customary) Table 5.1.3-4M Category 39, Type II, Class 2 Lengths (Metric) Table 5.1.3-5 Category 39, Type III Lengths (U.S. Customary) Table 5.1.3-5M Category 39, Type III Lengths (Metric) |
| 32 | Figure 5.1.4-1 Category 40, Type I Flare Nut Wrench Figure 5.1.4-2 Category 40, Type II Flare Nut Combination Wrench |
| 33 | Table 5.1.4-1 Category 40, Type I Flare Nut Wrench (U.S. Customary) Table 5.1.4-1M Category 40, Type I Flare Nut Wrench (Metric) |
| 34 | Table 5.1.4-2 Category 40, Type II Flare Nut Combination Wrench (U.S. Customary) Table 5.1.4-2M Category 40, Type II Flare Nut Combination Wrench (Metric) |
| 35 | Table 5.1.4-3 Category 40, Type I Lengths (U.S. Customary) Table 5.1.4-3M Category 40, Type I Lengths (Metric) Table 5.1.4-4 Category 40, Type II Lengths (U.S. Customary) Table 5.1.4-4M Category 40, Type II Lengths (Metric) |
| 36 | Figure 5.2-1 Category 8 Adjustable Wrench Table 5.2-1 Category 8 Adjustable Wrench (U.S. Customary) |
| 37 | Figure 5.3.1-1 Category 21, Type I, Class 1 Crowfoot Wrench, Flare Nut, Standard Duty Figure 5.3.1-2 Category 21, Type I, Class 2 Crowfoot Wrench, Flare Nut, Heavy Duty |
| 38 | Table 5.3.1-1 Category 21, Type I, Class 1 Flare Nut, 1⁄4 in. Square Drive, Standard Duty (U.S. Customary) Table 5.3.1-2 Category 21, Type I, Class 1 Flare Nut, 3⁄8 in. Square Drive, Standard Duty (U.S. Customary) |
| 39 | Table 5.3.1-3 Category 21, Type I, Class 1 Flare Nut, 1⁄2 in. Square Drive, Standard Duty (U.S. Customary) |
| 40 | Table 5.3.1-4 Category 21, Type I, Class 2 Flare Nut, 3⁄8 in. Square Drive, Heavy Duty (U.S. Customary) Table 5.3.1-4M Category 21, Type I, Class 2 Flare Nut, 3⁄8 in. Square Drive, Heavy Duty (Metric) |
| 41 | 5.10 Comfort Grips Figure 5.3.2-1 Category 21, Type II Crowfoot Wrench, Open End |
| 42 | Table 5.3.2-1 Category 21, Type II, Class 1 Open End, 3⁄8 in. Square Drive, Standard Duty (U.S. Customary) |
| 43 | Table 5.3.2-1M Category 21, Type II, Class 1 Open End, 3⁄8 in. Square Drive, Standard Duty (Metric) Table 5.3.2-2 Category 21, Type II, Class 1 Open End, 1⁄2 in. Square Drive, Standard Duty (U.S. Customary) |
| 44 | Table 5.3.2-3 Category 21, Type II, Class 1 Open End, 3⁄8 in. Square Drive, Heavy Duty (U.S. Customary) |
| 45 | Figure 5.4-1 Category 66 Laminated Ratcheting Box Wrench Figure 5.4-2 Category 66 Laminated Ratcheting Box Wrench (Offset) Figure 5.4-3 Category 66 Nonlaminated Ratcheting Box Wrench Figure 5.4-4 Category 66 Nonlaminated Ratcheting Box Wrench (With Reversing Mechanism) |
| 46 | 6 TESTS 6.1 Hardness 6.2 Proof Torque Test Figure 5.9.1-1 Flash Restrictions Figure 6.2.2-1 Category 8 Test Configuration |
| 47 | 6.3 Alternative Coating Tests Figure 6.2.2-2 Category 8 Mandrel Configuration |
| 48 | Table 6.2.3-1 Category 66 Ratcheting Box Wrench Torque Requirements (U.S. Customary) |
| 49 | 6.4 Clearance of Movable Jaw — Category 8 6.5 Parallelism of Jaw Surfaces — Category 8 6.6 Comfort Grip Solvent Test Table 6.2.3-1M Category 66 Ratcheting Box Wrench Torque Requirements (Metric) |
| 50 | Figure 6.4-1 Category 8 Jaw Clearance Measurement Figure 6.5-1 Parallelism Measurement |
| 51 | 6.7 Drop Test — Categories 8 and 66 6.8 Reversing Torque — Category 66 6.9 Cycle Test — Category 66 6.10 Failure Mode Test 7 SAFETY REQUIREMENTS AND LIMITATIONS OF USE |
| 52 | NONMANDATORY APPENDIX A DESIGNATIONS A-1 INTRODUCTION A-2 SPECIFICATIONS |
