🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME B16.24 2016

ASME B16.24 2016

$98.04

ASME B16.24 Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500

Published By Publication Date Number of Pages
ASME 2016 42
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This Standard covers cast copper alloy: threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500; flanged fittings having rating class designation 150 and 300; and threaded and flanged valves having rating class designations 150, 300, 600, 900, 1500, and 2500. It also establishes requirements for: pressure-temperature ratings; size and method of designating openings for reduced fittings; markings; materials; dimensions; bolting and gaskets; tolerances; nondestructive examination for valves; and tests. This standard also provides dimensional requirements for flanged ends of valves conforming to MSS SP-80.

PDF Catalog

PDF Pages PDF Title
4 CONTENTS
5 FOREWORD
7 ASME B16 COMMITTEE ROSTER
8 CORRESPONDENCE WITH THE B16 COMMITTEE
10 SUMMARY OF CHANGES
12 LIST OF CHANGES IN RECORD NUMBER ORDER
14 1 SCOPE
1.1 Inclusions
1.2 Dimensional Requirements
1.3 MSS SP-80 Requirements
1.4 ASTM B148 Requirements
2 GENERAL
2.1 Relevant Units
2.2 References
2.3 Quality Systems
2.4 Service Conditions
2.5 User Accountability
2.6 Time of Purchase, Manufacture, or Installation
15 2.7 Denotation
2.7.1 Pressure-Temperature Rating Designation.
2.7.2 Size.
3 PRESSURE-TEMPERATURE RATINGS
3.1 General
3.2 Flanged Joints
3.3 Pressure-Temperature Ratings of Flanged Joints
3.4 Rating Temperature
3.5 Low-Temperature Service
3.6 System Hydrostatic Test
16 Tables
Table 1 Pressure–Temperature Ratings for ASTM B61 Alloy C92200 and ASTM B62 Alloy C83600
17 Table 2 Dimensions of Class 150 Threaded Companion and Blind Flanges for Alloys C83600 and C92200
18 Table 3 Dimensions of Class 150 Elbows, Tees, Crosses, Laterals, True Ys (Straight Sizes), and Reducers
19 Table 4 Dimensions of Class 300 Threaded Companion and Blind Flanges for Alloys C83600 and C92200
20 Table 5 Dimensions of Class 300 Elbows, Tees, Crosses, Laterals, True Ys (Straight Sizes), and Reducers
21 4 SIZE AND METHOD OF DESIGNATING OPENINGS
4.1 Flanges, Fittings, and Valves
4.2 Reducing Fittings
5 MARKING
5.1 General
5.1.1 Name.
5.1.2 Material.
5.1.3 Pressure-Temperature Rating Designation.
Table 6 Pressure–Temperature Ratings for ASTM B148 Alloy C95200 Flanges
Table 7 Pressure–Temperature Ratings for ASTM B148 Alloy C95400 Flanges
22 Figure
Fig. 1 Method of Designating Outlets of Reducing Fittings
23 5.1.4 Conformance.
5.1.5 Size.
6 MATERIALS
6.1 General
6.2 Flanges
6.2.1 ASTM B61.
6.2.2 ASTM B62.
6.2.3 ASTM B148.
6.2.3.1 Ordering Information.
6.2.3.2 Test Bars.
6.2.3.3 Sampling.
6.2.3.4 Weld Repair Approval.
6.2.3.5 Weld Repair.
6.3 Flanged Fittings
6.4 Valves — Flanged and Threaded
6.5 Bolting
6.5.1 Steel Bolting.
6.5.2 Nonferrous Boltings.
6.6 Gaskets
24 6.7 Materials Selection
7 FLANGE AND VALVE BODY DIMENSIONS
7.1 General
7.1.1 ASTM B61 and ASTM B62.
7.1.2 ASTM B148 Alloys.
7.1.3 ASTM B148 End Flanges.
7.2 End-Flange Facings
7.3 Threaded Flanges
7.4 Thread Chamfer
7.5 Thread Length
7.6 Thread Gauging
7.7 Threaded Flange Assembly
7.8 Flanged Bolt Holes
7.9 Spot and Back Facing
8 FITTING AND VALVE DIMENSIONS
8.1 Center-to-Face Dimensions
8.1.1 Side Outlet Fittings.
8.1.2 Elbows
25 8.1.3 Tees, Crosses, and Laterals
8.1.4 True Ys.
8.1.5 Reducers and Eccentric Reducers.
8.1.6 Valves.
8.1.7 Interchangeability.
8.2 Wall Thickness
8.2.1 Fittings.
8.2.2 Valves.
9 BOLTING AND GASKETS
9.1 Bolting
9.2 Gaskets
10 TOLERANCES
10.1 Convention
10.2 Wall Thickness
26 10.3 Center-to-Face
10.4 Facings
10.5 Flange Thickness
10.6 Counterbore, Threaded Flanges
10.7 Drilling and Facing
11 PRESSURE TESTING
11.1 Flange Test
11.2 Flanged Fitting Test
11.2.1 Shell Pressure Test.
11.2.2 Test Conditions.
11.2.3 Test Fluid.
11.2.4 Test Duration.
11.2.5 Acceptance.
11.3 Valve Pressure Test
28 Table I-1 Pressure–Temperature Ratings for ASTM B61 Alloy C92200 and ASTM B62 Alloy C83600
MANDATORY APPENDIX I DIMENSIONS OF FITTINGS IN U.S. CUSTOMARY UNITS
29 Table I-2 Dimensions of Class 150 Threaded Companion and Blind Flanges for Alloys C83600 and C92200
30 Table I-3 Dimensions of Class 150 Elbows, Tees, Crosses, Laterals, True Ys (Straight Sizes), and Reducers
31 Table I-4 Dimensions of Class 300 Threaded Companion and Blind Flanges for Alloys C83600 and C92200
32 Table I-5 Dimensions of Class 300 Elbows, Tees, Crosses, Laterals, True Ys (Straight Sizes), and Reducers
33 Table I-6 Pressure–Temperature Ratings for ASTM B148 Alloy C95200 Flanges
Table I-7 Pressure–Temperature Ratings for ASTM B148 Alloy C95400 Flanges
34 MANDATORY APPENDIX II ASTM B148 VALVE CONSTRUCTION SUPPLEMENTAL REQUIREMENTS
II-0 GENERAL STATEMENTS
II-1 SCOPE
II-2 GENERAL
II-2.7 Denotation
II-2.7.1 Pressure-Temperature Rating Designation.
II-3 PRESSURE-TEMPERATURE RATINGS
II-3.6 System Hydrostatic Test
II-4 SIZE AND METHOD OF DESIGNATING OPENINGS
II-4.3 Valves
II-5 MARKING
II-5.1 General
II-5.1.4 Conformance.
II-5.2 Valve Identification Plate
35 II-6 MATERIALS
II-6.4 Valves — Flanged and Threaded
II-6.5 Bolting
II-6.5.1 Steel Bolting.
II-6.5.2 Nonferrous Bolting.
II-7 FLANGE AND VALVE BODY DIMENSIONS
II-7.1 General
II-7.1.3 ASTM B148 End Flanges.
II-7.6 Thread Gauging
II-8 FITTING AND VALVE DIMENSIONS
II-8.1 Center-to-Face Dimensions
II-8.1.6 Valves.
II-8.1.8 Valve Body Flanges.
II-8.3 Additional Valve Body Dimensional Requirements
II-8.3.1 Wall Thickness.
II-8.3.2 Threaded End Dimensions.
II-8.3.3 Auxiliary Connections.
II-8.3.4 Body Joints.
II-8.3.5 Stem Retention.
II-8.3.6 Wafer or Flangeless Valves.
II-9 BOLTING AND GASKETS
II-10 TOLERANCES
II-10.8 Valve Face-to-Face Tolerances
II-10.8.1 Straightway Valves
36 II-10.8.2 Angle Valves.
II-11 PRESSURE TESTING
II-11.3 Valve Pressure Test
II-11.3.1 Closure Acceptance Leakage.
37 MANDATORY APPENDIX III REFERENCES
38 NONMANDATORY APPENDIX A QUALITY SYSTEM PROGRAM
39 NONMANDATORY APPENDIX B METHOD USED FOR ESTABLISHING PRESSUREÅTEMPERATURE RATINGS
B-1 GENERAL
B-1.1 Introduction
B-1.2 Material Properties
B-2 PRESSURE-TEMPERATURE RATING METHOD
B-2.1 Rating Equation
B-2.2 Selected Stress

Related products

  • ASME PTB 2 2022

    ASME PTB 2 2022

    ASME PTB-2-2022 Guide to Life Cycle Management of Pressure Equipment Integrity Published By Publication Date…

    $98.04 Add to cart
  • ASME B16.21 2016

    ASME B16.21 2016

    ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges Published By Publication Date Number of Pages…

    $98.04 Add to cart
ASME B16.24 2016
$98.04