🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME B16.34 2013

ASME B16.34 2013

$98.04

ASME B16.34 Valves – Flanged, Threaded, and Welding End

Published By Publication Date Number of Pages
ASME 2013 208
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Upon request from industry and government, ASME has been defining piping safety since 1922. This Standard applies to new construction. It covers pressure-temperature ratings, dimensions, tolerances, materials, nondestructive examination requirements, testing, and marking for cast, forged, and fabricated flanged, threaded, and welding end and wafer or flangeless valves of steel, nickel-base alloys, and other alloys shown in Table 1. Wafer or flangeless valves, bolted or through-bolt types, that are installed between flanges or against a flange are treated as flanged-end valves. Alternative rules for NPS 2

PDF Catalog

PDF Pages PDF Title
5 CONTENTS
7 FOREWORD
10 COMMITTEE ROSTER
11 CORRESPONDENCE WITH THE B16 COMMITTEE
12 INTRODUCTION
13 SUMMARY OF CHANGES
15 1 SCOPE
16 2 PRESSURE– TEMPERATURE RATINGS
18 3 NOMINAL PIPE SIZE
4 MARKING
19 5 MATERIALS
20 6 DIMENSIONS
24 7 PRESSURE TESTING
25 8 REQUIREMENTS FOR SPECIAL CLASS VALVES
37 Tables
Table 1 Material Specification List: Applicable ASTM Specification
42 Table 2- 1.1 Ratings for Group 1.1 Materials
A – Standard Class
B – Special Class
43 Table 2- 1.2 Ratings for Group 1.2 Materials
A – Standard Class
B – Special Class
44 Table 2- 1.3 Ratings for Group 1.3 Materials
A – Standard Class
B – Special Class
45 Table 2- 1.4 Ratings for Group 1.4 Materials
A – Standard Class
B – Special Class
46 Table 2- 1.5 Ratings for Group 1.5 Materials
A – Standard Class
B – Special Class
47 Table 2- 1.6 Ratings for Group 1.6 Materials
A – Standard Class
B – Special Class
48 Table 2- 1.7 Ratings for Group 1.7 Materials
A – Standard Class
B – Special Class
49 Table 2- 1.8 Ratings for Group 1.8 Materials
A – Standard Class
B – Special Class
50 Table 2- 1.9 Ratings for Group 1.9 Materials
A – Standard Class
B – Special Class
51 Table 2- 1.10 Ratings for Group 1.10 Materials
A – Standard Class
B – Special Class
52 Table 2- 1.11 Ratings for Group 1.11 Materials
A – Standard Class
53 Table 2- 1.11 Ratings for Group 1.11 Materials ( Cont’d) B – Special Class
54 Table 2- 1.12 Ratings for Group 1.12 Materials
A – Standard Class
B – Special Class
55 Table 2- 1.13 Ratings for Group 1.13 Materials
A – Standard Class
B – Special Class
56 Table 2- 1.14 Ratings for Group 1.14 Materials
A – Standard Class
B – Special Class
57 Table 2- 1.15 Ratings for Group 1.15 Materials
A – Standard Class
B – Special Class
58 Table 2- 1.16 Ratings for Group 1.16 Materials
A – Standard Class
59 Table 2- 1.16 Ratings for Group 1.16 Materials ( Cont’d) B – Special Class
60 Table 2- 1.17 Ratings for Group 1.17 Materials
A – Standard Class
B – Special Class
61 Table 2- 1.18 Ratings for Group 1.18 Materials
A – Standard Class
B – Special Class
62 Table 2- 2.1 Ratings for Group 2.1 Materials
A – Standard Class
63 Table 2- 2.1 Ratings for Group 2.1 Materials ( Cont’d) B – Special Class
64 Table 2- 2.2 Ratings for Group 2.2 Materials
A – Standard Class
65 Table 2- 2.2 Ratings for Group 2.2 Materials ( Cont’d) B – Special Class
66 Table 2- 2.3 Ratings for Group 2.3 Material
A – Standard Class
B – Special Class
67 Table 2- 2.4 Ratings for Group 2.4 Materials
A – Standard Class
68 Table 2- 2.4 Ratings for Group 2.4 Materials ( Cont’d) B – Special Class
69 Table 2- 2.5 Ratings for Group 2.5 Materials
A – Standard Class
70 Table 2- 2.5 Ratings for Group 2.5 Materials ( Cont’d) B – Special Class
71 Table 2- 2.6 Ratings for Group 2.6 Materials
A – Standard Class
72 Table 2- 2.6 Ratings for Group 2.6 Materials ( Cont’d) B – Special Class
73 Table 2- 2.7 Ratings for Group 2.7 Materials
A – Standard Class
74 Table 2- 2.7 Ratings for Group 2.7 Materials ( Cont’d) B – Special Class
75 Table 2- 2.8 Ratings for Group 2.8 Materials
A – Standard Class
B – Special Class
76 Table 2- 2.9 Ratings for Group 2.9 Materials
A – Standard Class
77 Table 2- 2.9 Ratings for Group 2.9 Materials ( Cont’d) B – Special Class
78 Table 2- 2.10 Ratings for Group 2.10 Materials
A – Standard Class
79 Table 2- 2.10 Ratings for Group 2.10 Materials ( Cont’d) B – Special Class
80 Table 2- 2.11 Ratings for Group 2.11 Materials
A – Standard Class
81 Table 2- 2.11 Ratings for Group 2.11 Materials ( Cont’d) B – Special Class
82 Table 2- 2.12 Ratings for Group 2.12 Materials
A – Standard Class
83 Table 2- 2.12 Ratings for Group 2.12 Materials ( Cont’d) B – Special Class
84 Table 2- 3.1 Ratings for Group 3.1 Materials
A – Standard Class
B – Special Class
85 Table 2- 3.2 Ratings for Group 3.2 Materials
A – Standard Class
B – Special Class
86 Table 2- 3.3 Ratings for Group 3.3 Materials
A – Standard Class
B – Special Class
87 Table 2- 3.4 Ratings for Group 3.4 Materials
A – Standard Class
B – Special Class
88 Table 2- 3.5 Ratings for Group 3.5 Materials
A – Standard Class
B – Special Class
89 Table 2- 3.6 Ratings for Group 3.6 Materials
A – Standard Class
90 Table 2- 3.6 Ratings for Group 3.6 Materials ( Cont’d) B – Special Class
91 Table 2- 3.7 Ratings for Group 3.7 Materials
A – Standard Class
B – Special Class
92 Table 2- 3.8 Ratings for Group 3.8 Materials
A – Standard Class
93 Table 2- 3.8 Ratings for Group 3.8 Materials ( Cont’d) B – Special Class
94 Table 2- 3.9 Ratings for Group 3.9 Materials
A – Standard Class
95 Table 2- 3.9 Ratings for Group 3.9 Materials ( Cont’d) B – Special Class
96 Table 2- 3.10 Ratings for Group 3.10 Materials
A – Standard Class
B – Special Class
97 Table 2- 3.11 Ratings for Group 3.11 Materials
A – Standard Class
B – Special Class
98 Table 2- 3.12 Ratings for Group 3.12 Materials
A – Standard Class
B – Special Class
99 Table 2- 3.13 Ratings for Group 3.13 Materials
A – Standard Class
B – Special Class
100 Table 2- 3.14 Ratings for Group 3.14 Materials
A – Standard Class
B – Special Class
101 Table 2- 3.15 Ratings for Group 3.15 Materials
A – Standard Class
102 Table 2- 3.15 Ratings for Group 3.15 Materials ( Cont’d) B – Special Class
103 Table 2- 3.16 Ratings for Group 3.16 Materials
A – Standard Class
104 Table 2- 3.16 Ratings for Group 3.16 Materials ( Cont’d) B – Special Class
105 Table 2- 3.17 Ratings for Group 3.17 Materials
A – Standard Class
B – Special Class
106 Table 2- 3.18 Ratings for Group 3.18 Materials
A – Standard Class
B – Special Class
107 Table 2- 3.19 Ratings for Group 3.19 Materials
A – Standard Class
108 Table 2- 3.19 Ratings for Group 3.19 Materials ( Cont’d) B – Special Class
109 Table 3A Valve Body Minimum Wall Thickness,
112 Table 3B Valve Body Minimum Wall Thickness,
115 Table 4 Minimum Wall Thickness for Socket Welding and Threaded Ends
117 MANDATORY APPENDIX I RADIOGRAPHY EXAMINATION: PROCEDURE AND ACCEPTANCE STANDARDS
I- 1 RADIOGRAPHY PROCEDURE
I- 2 ACCEPTANCE STANDARDS
118 Table I- 1 Acceptance Criteria for Thickness per Para. I- 2.1
Table I- 2 Acceptance Criteria for Thickness per Para. I- 2.2
Table I- 3 Acceptance Criteria for Thickness per Para. I- 2.3
119 MANDATORY APPENDIX II MAGNETIC PARTICLE EXAMINATION: PROCEDURE AND ACCEPTANCE STANDARDS
II- 1 PROCEDURE
II- 2 ACCEPTANCE STANDARDS1
120 MANDATORY APPENDIX III LIQUID PENETRANT EXAMINATION: PROCEDURE AND ACCEPTANCE STANDARDS
III- 1 PROCEDURE
III- 2 ACCEPTANCE STANDARDS1
121 MANDATORY APPENDIX IV ULTRASONIC EXAMINATION: PROCEDURE AND ACCEPTANCE STANDARDS
IV- 1 PROCEDURE
IV- 2 ACCEPTANCE STANDARDS
122 MANDATORY APPENDIX V REQUIREMENTS FOR LIMITED CLASS VALVES
V- 1 GENERAL
Table V- 1 Material Coefficient,
125 MANDATORY APPENDIX VI BASIS EQUATIONS FOR MINIMUM WALL THICKNESS
VI- 1 MINIMUM WALL THICKNESS EQUATIONS
VI- 2 DESIGN VALUES
126 Table VI- 1 Basis Equations for Minimum Wall Thickness, mm
Table VI- 2 Basis Equations for Minimum Wall Thickness, in.
127 MANDATORY APPENDIX VII PRESSURE– TEMPERATURE RATINGS: U. S. CUSTOMARY UNITS1
128 Table VII- 2- 1.1 Ratings for Group 1.1 Materials
A – Standard Class
B – Special Class
129 Table VII- 2- 1.2 Ratings for Group 1.2 Materials
A – Standard Class
B – Special Class
130 Table VII- 2- 1.3 Ratings for Group 1.3 Materials
A – Standard Class
B – Special Class
131 Table VII- 2- 1.4 Ratings for Group 1.4 Materials
A – Standard Class
B – Special Class
132 Table VII- 2- 1.5 Ratings for Group 1.5 Materials
A – Standard Class
B – Special Class
133 Table VII- 2- 1.6 Ratings for Group 1.6 Materials
A – Standard Class
B – Special Class
134 Table VII- 2- 1.7 Ratings for Group 1.7 Materials
A – Standard Class
B – Special Class
135 Table VII- 2- 1.8 Ratings for Group 1.8 Materials
A – Standard Class
B – Special Class
136 Table VII- 2- 1.9 Ratings for Group 1.9 Materials
A – Standard Class
B – Special Class
137 Table VII- 2- 1.10 Ratings for Group 1.10 Materials
A – Standard Class
B – Special Class
138 Table VII- 2- 1.11 Ratings for Group 1.11 Materials
A – Standard Class
B – Special Class
139 Table VII- 2- 1.12 Ratings for Group 1.12 Materials
A – Standard Class
B – Special Class
140 Table VII- 2- 1.13 Ratings for Group 1.13 Materials
A – Standard Class
B – Special Class
141 Table VII- 2- 1.14 Ratings for Group 1.14 Materials
A – Standard Class
B – Special Class
142 Table VII- 2- 1.15 Ratings for Group 1.15 Materials
A – Standard Class
B – Special Class
143 Table VII- 2- 1.16 Ratings for Group 1.16 Materials
A – Standard Class
B – Special Class
144 Table VII- 2- 1.17 Ratings for Group 1.17 Materials
A – Standard Class
B – Special Class
145 Table VII- 2- 1.18 Ratings for Group 1.18 Materials
A – Standard Class
B – Special Class
146 Table VII- 2- 2.1 Ratings for Group 2.1 Materials
A – Standard Class
147 Table VII- 2- 2.1 Ratings For Group 2.1 Materials ( Cont’d) B – Special Class
148 Table VII- 2- 2.2 Ratings for Group 2.2 Materials
A – Standard Class
149 Table VII- 2- 2.2 Ratings For Group 2.2 Materials ( Cont’d) B – Special Class
150 Table VII- 2- 2.3 Ratings for Group 2.3 Materials
A – Standard Class
B – Special Class
151 Table VII- 2- 2.4 Ratings for Group 2.4 Materials
A – Standard Class
152 Table VII- 2- 2.4 Ratings for Group 2.4 Materials ( Cont’d) B – Special Class
153 Table VII- 2- 2.5 Ratings for Group 2.5 Materials
A – Standard Class
154 Table VII- 2- 2.5 Ratings for Group 2.5 Materials ( Cont’d) B – Special Class
155 Table VII- 2- 2.6 Ratings for Group 2.6 Materials
A – Standard Class
156 Table VII- 2- 2.6 Ratings for Group 2.6 Materials ( Cont’d) B – Special Class
157 Table VII- 2- 2.7 Ratings for Group 2.7 Materials
A – Standard Class
158 Table VII- 2- 2.7 Ratings for Group 2.7 Materials ( Cont’d) B – Special Class
159 Table VII- 2- 2.8 Ratings for Group 2.8 Materials
A – Standard Class
B – Special Class
160 Table VII- 2- 2.9 Ratings for Group 2.9 Materials
A – Standard Class
161 Table VII- 2- 2.9 Ratings for Group 2.9 Materials ( Cont’d) B – Special Class
162 Table VII- 2- 2.10 Ratings for Group 2.10 Materials
A – Standard Class
163 Table VII- 2- 2.10 Ratings for Group 2.10 Materials ( Cont’d) B – Special Class
164 Table VII- 2- 2.11 Ratings for Group 2.11 Materials
A – Standard Class
165 Table VII- 2- 2.11 Ratings for Group 2.11 Materials ( Cont’d) B – Special Class
166 Table VII- 2- 2.12 Ratings for Group 2.12 Materials
A – Standard Class
167 Table VII- 2- 2.12 Ratings for Group 2.12 Materials ( Cont’d) B – Special Class
168 Table VII- 2- 3.1 Ratings for Group 3.1 Materials
A – Standard Class
B – Special Class
169 Table VII- 2- 3.2 Ratings for Group 3.2 Materials
A – Standard Class
B – Special Class
170 Table VII- 2- 3.3 Ratings for Group 3.3 Materials
A – Standard Class
B – Special Class
171 Table VII- 2- 3.4 Ratings for Group 3.4 Materials
A – Standard Class
B – Special Class
172 Table VII- 2- 3.5 Ratings for Group 3.5 Materials
A – Standard Class
B – Special Class
173 Table VII- 2- 3.6 Ratings for Group 3.6 Materials
A – Standard Class
174 Table VII- 2- 3.6 Ratings for Group 3.6 Materials ( Cont’d) B – Special Class
175 Table VII- 2- 3.7 Ratings for Group 3.7 Materials
A – Standard Class
B – Special Class
176 Table VII- 2- 3.8 Ratings for Group 3.8 Materials
A – Standard Class
177 Table VII- 2- 3.8 Ratings for Group 3.8 Materials ( Cont’d) B – Special Class
178 Table VII- 2- 3.9 Ratings for Group 3.9 Materials
A – Standard Class
179 Table VII- 2- 3.9 Ratings for Group 3.9 Materials ( Cont’d) B – Special Class
180 Table VII- 2- 3.10 Ratings for Group 3.10 Materials
A – Standard Class
B – Special Class
181 Table VII- 2- 3.11 Ratings for Group 3.11 Materials
A – Standard Class
B – Special Class
182 Table VII- 2- 3.12 Ratings for Group 3.12 Materials
A – Standard Class
B – Special Class
183 Table VII- 2- 3.13 Ratings for Group 3.13 Materials
A – Standard Class
B – Special Class
184 Table VII- 2- 3.14 Ratings for Group 3.14 Materials
A – Standard Class
B – Special Class
185 Table VII- 2- 3.15 Ratings for Group 3.15 Materials
A – Standard Class
186 Table VII- 2- 3.15 Ratings for Group 3.15 Materials ( Cont’d) B – Special Class
187 Table VII- 2- 3.16 Ratings for Group 3.16 Materials
A – Standard Class
188 Table VII- 2- 3.16 Ratings for Group 3.16 Materials ( Cont’d) B – Special Class
189 Table VII- 2- 3.17 Ratings for Group 3.17 Materials
A – Standard Class
B – Special Class
190 Table VII- 2- 3.18 Ratings for Group 3.18 Materials
A – Standard Class
B – Special Class
191 Table VII- 2- 3.19 Ratings for Group 3.19 Materials
A – Standard Class
192 Table VII- 2- 3.19 Ratings for Group 3.19 Materials ( Cont’d) B – Special Class
193 MANDATORY APPENDIX VIII REFERENCES
196 NONMANDATORY APPENDIX A RELATIONSHIP BETWEEN NOMINAL PIPE SIZE AND INSIDE DIAMETER
197 Table A- 1 Inside Diameter,
198 NONMANDATORY APPENDIX B METHOD USED FOR ESTABLISHING PRESSURE– TEMPERATURE RATINGS
B- 1 GENERAL CONSIDERATIONS
B- 2 STANDARD CLASS RATING METHOD
200 B- 3 SPECIAL CLASS RATING METHOD
B- 4 INTERMEDIATE RATING CLASS METHOD
201 Table B- 1 Pressure– Temperature Matrix
Table B- 2 Class- Diameter Matrix
B- 5 MAXIMUM RATINGS
202 Table B- 3M Ceiling Pressure, bar A – Standard Class
B – Special Class
203 Table B- 3M Ceiling Pressure, bar ( Cont’d) B – Special Class ( Cont’d)
204 Table B- 3 Ceiling Pressure, psi ( Cont’d) A – Standard Class
B – Special Class
205 NONMANDATORY APPENDIX C QUALITY SYSTEM PROGRAM

Related products

  • ASME B16.20 2023

    ASME B16.20 2023

    ASME B16.20-2023 Metallic Gaskets for Pipe Flanges Published By Publication Date Number of Pages ASME…

    $98.04 Add to cart
  • ASME B16.26 2018

    ASME B16.26 2018

    ASME B16.26 – 2018 Cast Copper Alloy Fittings for Flared Copper Tubes Published By Publication…

    $98.04 Add to cart
  • ASME B16.10 2017

    ASME B16.10 2017

    ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves Published By Publication Date Number of Pages…

    $98.04 Add to cart
  • ASME B16.38 2023

    ASME B16.38 2023

    ASME B16.38-2023 Large Metallic Valves for Gas Distribution Published By Publication Date Number of Pages…

    $98.04 Add to cart
  • ASME B16.26 2013

    ASME B16.26 2013

    ASME B16.26 Cast Copper Alloy Fittings for Flared Copper Tubes Published By Publication Date Number…

    $98.04 Add to cart
  • ASME B16.25 2012

    ASME B16.25 2012

    ASME B16.25 Buttwelding Ends Published By Publication Date Number of Pages ASME 2012 32

    $98.04 Add to cart
  • ASME B16.50 2018

    ASME B16.50 2018

    ASME B16.50 – 2018 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings Published By Publication…

    $98.04 Add to cart
  • ASME B16.33 2012 R2017

    ASME B16.33 2012 R2017

    ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to…

    $98.04 Add to cart
  • ASME B16.40 2019

    ASME B16.40 2019

    ASME B16.40 – 2019: Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems…

    $98.04 Add to cart
  • ASME B16.25 2017

    ASME B16.25 2017

    ASME B16.25 Buttwelding Ends Published By Publication Date Number of Pages ASME 2017 38

    $98.04 Add to cart
  • ASME B16.5 2013

    ASME B16.5 2013

    ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard Published…

    $98.04 Add to cart
  • ASME B16.42 2016

    ASME B16.42 2016

    ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300 Published By…

    $98.04 Add to cart
  • ASME B16.23 2016

    ASME B16.23 2016

    ASME B16.23 Cast Copper Alloy Solder Joint Drainage Fittings: DWV Published By Publication Date Number…

    $98.04 Add to cart
  • ASME B16.38 2012

    ASME B16.38 2012

    ASME B16.38 Large Metallic Valves for Gas Distribution: Manually Operated, NPS 2 1/2 (DN 65)…

    $98.04 Add to cart
  • ASME Y14.34 2013

    ASME Y14.34 2013

    ASME Y14.34 Associated Lists Published By Publication Date Number of Pages ASME 2013 36

    $98.04 Add to cart
  • ASME B16.3 2016

    ASME B16.3 2016

    ASME B16.3 Malleable Iron Threaded Fittings: Classes 150 and 300 Published By Publication Date Number…

    $98.04 Add to cart
  • ASME B16.36 2015

    ASME B16.36 2015

    ASME B16.36 – 2015: Orifice Flanges Published By Publication Date Number of Pages ASME 2015…

    $98.04 Add to cart
  • ASME B16.15 2013

    ASME B16.15 2013

    ASME B16.15 Cast Copper Alloy Threaded Fittings: Classes 125 and 250 Published By Publication Date…

    $98.04 Add to cart
  • ASME B16.44 2023

    ASME B16.44 2023

    ASME B16.44-2023 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to…

    $98.04 Add to cart
  • ASME B16.11 2016

    ASME B16.11 2016

    ASME B16.11 Forged Fittings, Socket-Welding and Threaded Published By Publication Date Number of Pages ASME…

    $98.04 Add to cart
  • ASME B16.44 2012

    ASME B16.44 2012

    ASME B16.44 Manually Operated Metallic Gas Valves for Use in Above Ground Piping Systems up…

    $98.04 Add to cart
  • ASME B16.22 2012

    ASME B16.22 2012

    ASME B16.22 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings Published By Publication Date Number…

    $98.04 Add to cart
  • ASME B16.49 2023

    ASME B16.49 2023

    ASME B16.49-2023 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems Published By…

    $98.04 Add to cart
  • ASME B16.38 2012 R2017

    ASME B16.38 2012 R2017

    ASME B16.38 Large Metallic Valves for Gas Distribution: Manual Operated,NPS 2 1/2 (DN 65) to…

    $98.04 Add to cart
  • ASME B16.39 2019

    ASME B16.39 2019

    ASME B16.39-2019: Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300 Published By Publication…

    $98.04 Add to cart
  • ASME B16.51 2018

    ASME B16.51 2018

    ASME B16.51 – 2018 Copper and Copper Alloy Press-Connect Pressure Fittings Published By Publication Date…

    $98.04 Add to cart
  • ASME B16.4 2016

    ASME B16.4 2016

    ASME B16.4 Gray Iron Threaded Fittings: Classes 125 and 250 Published By Publication Date Number…

    $98.04 Add to cart
  • ASME B16.21 2016

    ASME B16.21 2016

    ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges Published By Publication Date Number of Pages…

    $98.04 Add to cart
  • ASME B16.50 2013

    ASME B16.50 2013

    ASME B16.50 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings Published By Publication Date Number…

    $98.04 Add to cart
  • ASME B16.40 2013

    ASME B16.40 2013

    ASME B16.40 Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems Published By…

    $98.04 Add to cart
  • ASME B16.44 2012 R2017

    ASME B16.44 2012 R2017

    ASME B16.44 Manually Operated Metallic Gas Valves for Use in Above Ground Piping Systems up…

    $98.04 Add to cart
  • ASME B16.33 2012

    ASME B16.33 2012

    ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to…

    $98.04 Add to cart
  • ASME B16.39 2014

    ASME B16.39 2014

    ASME B16.39 Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300 Published By Publication…

    $98.04 Add to cart
  • ASME B107.34 2003

    ASME B107.34 2003

    ASME B107.34 Socket Wrenches for Spark Plugs Published By Publication Date Number of Pages ASME…

    $98.04 Add to cart
  • ASME B16.12 2019

    ASME B16.12 2019

    ASME B16.12-2019 – Cast Iron Threaded Drainage Fittings Published By Publication Date Number of Pages…

    $98.04 Add to cart
  • ASME B18.24 2023

    ASME B18.24 2023

    ASME B18.24-2023 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products Published By…

    $98.04 Add to cart
  • ASME B16.24 2016

    ASME B16.24 2016

    ASME B16.24 Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600,…

    $98.04 Add to cart
  • ASME B16.51 2013

    ASME B16.51 2013

    ASME B16.51 Copper and Copper Alloy Press-Connect Pressure Fittings Published By Publication Date Number of…

    $98.04 Add to cart
  • ASME B16.34 2017

    ASME B16.34 2017

    ASME B16.34 Valves Flanged, Threaded, and Welding End Published By Publication Date Number of Pages…

    $98.04 Add to cart
  • ASME B16.29 2012

    ASME B16.29 2012

    ASME B16.29 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV Published By Publication Date…

    $98.04 Add to cart
ASME B16.34 2013
$98.04