🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME B18.27 1998 R2017

ASME B18.27 1998 R2017

$75.42

ASME B18.27 Tapered and Reduced Cross Section Retaining Rings (Inch Series)

Published By Publication Date Number of Pages
ASME 1998 249
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This Standard covers general and dimensional data for the following general purpose tapered and reduced cross section retaining rings: a) External Type NA1, Internal Type NA2, and E-Ring Type NA3 b) Heavy Duty External Type NA4, Reinforced E-Rings NA5, C-Rings Type NA6 c) Bowed External Rings NA7, Bowed Internal Rings NA8, Bowed External E-Rings NA9 d) Inverted External Type NA10, Inverted Internal Type NA11, Beveled External Type NA12, Beveled Internal Type NA13 e) External Self-Locking Rings Type NA14, External Interlocking rings Type NA15, External Bowed Locking Prongs Rings Type NA16 The data my used with the nominal size shafts and housings listed and in grooves of the recommended dimensions listed herein. Also included are formulas and tolerances on which dimensional data are based. Three appendices include guidance for assembly and recommended standard drawing formats. The inclusion of dimensional data in this Standard in not intended to imply that all of the products described are stock productions sizes. Consumers should consult with suppliers concerning lists of stock production sizes. B18.27-1998 is a consolidation and update of B18.27.1, Part 1 External Type – NA1; Internal Type NA2; E-Ring Type – NA3; B18.27.2, Part 2 Heavy Duty External – NA4; Reinforced “E” Rings – NA5; “C” Type Rings – NA6; B18.27.3, Part 3 Bowed External – NA7; Bowed Internal – NA8; Bowed External “E” – NA9; B18.27a-1999 addenda added in B18.27.4, Part 4 Inverted External NA10, Inverted Internal NA11, Beveled External NA12, Beveled Internal NA13 B18.27b-2000 addenda added in B18.27.5, Part 5 Type NA14 – External Self-Locking Rings; Type NA15 – External Interlocking Rings; Type NA16 – External Bowed Locking Prongs Rings This publication is issued with an automatic addenda service. All addenda service publications are issued in loose leaf format to facilitate later insertion of replacement pages which incorporate the latest approved changes to the standard. Purchasers may wish to purchase a binder from ASME (ASME Binder), but the publication will also fit a standard three ring binder. Details on the specifics of the addenda service are as follows:

PDF Catalog

PDF Pages PDF Title
8 SUMMARY OF CHANGES
10 FOREWORD
12 COMMITTEE ROSTER
14 CORRESPONDENCE WITH 818 COMMITTEE
16 PREFACE
20 CONTENTS
22 ASME B18.27.1
ASME B18.27.1 CONTENTS
24 1 INTRODUCTORY NOTES
25 2 GENERAL DATA
3 MATERIAL
26 4 HARDNESS TESTING PROCEDURE
5 PERMANENT SET LIMITS
Tables
TABLE 1 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CARBON SPRING STEEL)
27 TABLE 2 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CORROSION-RESISTANT STEEL)
TABLE 3 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (BERYLLIUM COPPER)
28 6 IRREGULARITY LIMITATIONS
7 WORKMANSHIP
8 ADDITIONAL DATA
Figures
FIG. 1 PERMANENT SET MEASUREMENTS FOR TYPE NA 1 RINGS
FIG. 2 PERMANENT SET MEASUREMENTS FOR TYPE NA2 RINGS
29 FIG. 3 DISH FOR TYPE NA1, TYPE NA2, AND TYPE NA3 RINGS
FIG. 4 PITCH FOR TYPE NA1, TYPE NA2, AND TYPE NA3 RINGS
TABLE 4 DISH LIMITATIONS FOR TAPERED AND REDUCED SECTION RETAINING RINGS
TABLE 5 PITCH LIMITATIONS FOR TAPERED AND REDUCED SECTION RETAINING RINGS
30 TABLE 6 ILLUSTRATION
31 TABLE 6 NA 1 BASIC EXTERNAL RETAINING RINGS
34 TABLE 7 ILLUSTRATION
35 TABLE 7 NA2 BASIC INTERNAL RETAINING RINGS
38 TABLE 8 ILLUSTRATION
39 TABLE 8 NA3 IE-TYPE) EXTERNAL RETAINING RINGS
40 MANDATORY APPENDICES
MANDATORY APPENDIX I BASIC EXTERNAL SERIES NA 1
46 MANDATORY APPENDIX II BASIC INTERNAL SERIES NA2
52 MANDATORY APPENDIX III E-RING EXTERNAL SERIES NA3
56 NONMANDATORV APPENDICES
NONMANDATORV APPENDIX A TYPE NA 1 REFERENCE METRIC VALUES (DIMENSIONS)
60 NONMANDATORY APPENDIX B TYPE NA 1 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
66 NONMANDATORV APPENDIX C TYPE NA2 REFERENCE METRIC VALUES (DIMENSIONS)
70 NONMANDATORY APPENDIX D TYPE NA2 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
76 NONMANDATORY APPENDIX E TYPE NA3 REFERENCE METRIC VALUES (DIMENSIONS)
78 NONMANDATORY APPENDIX F TYPE NA3 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
80 ASME B18.27.2
ASME B 18.27.2 CONTENTS
82 1 INTRODUCTORY NOTES
83 2 GENERAL DATA
3 MATERIAL
4 HARDNESS TESTING PROCEDURE
84 5 PERMANENT SET LIMITS
Tables
TABLE 1 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CARBON SPRING STEEL)
TABLE 2 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CORROSION-RESISTANT STEEL)
85 6 IRREGULARITY LIMITATIONS
7 WORKMANSHIP
8 ADDITIONAL DATA
Figures
FIG. 1 PERMANENT SET MEASUREMENTS FOR TYPE NA4 RINGS
TABLE 3 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (BERYLLIUM COPPER)
86 FIG. 2 DISH FOR TYPE NA4, TYPE NA5, AND TYPE NA6 RINGS
FIG. 3 PITCH FOR TYPE NA4, TYPE NA5, AND TYPE NA6 RINGS
87 TABLE 4 DISH LIMITATIONS FOR TAPERED AND REDUCED SECTION RETAINING RINGS
TABLE 5 PITCH LIMITATIONS FOR TAPERED AND REDUCED SECTION RETAINING RINGS
88 TABLE 6 ILLUSTRATION
89 TABLE 6 NA4 HEAVY DUTY EXTERNAL RETAINING RINGS
90 TABLE 7 ILLUSTRATION
91 TABLE 1 NA5 (REINFORCED E-TYPE) EXTERNAL RETAINING RINGS
92 TABLE 8 ILLUSTRATION
93 TABLE 8 NA6 (C-TYPE) EXTERNAL RETAINING RINGS
94 MANDATORY APPENDICES
MANDATORY APPENDIX I HEAVY DUTY EXTERNAL SERIES NA4
98 MANDATORY APPENDIX II REINFORCED E-RING SERIES NA5
100 MANDATORY APPENDIX III C-RING SERIES NA6
102 NONMANDATORV APPENDICES
NONMANDATORV APPENDIX A TYPE NA4 REFERENCE METRIC VALUES (DIMENSIONS)
104 NONMANDATORY APPENDIX B TYPE NA4 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
106 NONMANDATORY APPENDIX C TYPE NA5 REFERENCE METRIC VALUES (DIMENSIONS)
108 NONMANDATORY APPENDIX D TYPE NA5 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
110 NONMANDATORV APPENDIX E TYPE NA6 REFERENCE METRIC VALUES (DIMENSIONS)
112 NONMANDATORY APPENDIX F TYPE NA6 REFERENCE METRIC VALUES {SUPPLEMENTARY INFORMATION)
114 ASME B18.27.3
ASME B 18.27.3 Contents
116 1 INTRODUCTORY NOTES
117 2 GENERAL DATA
3 MATERIAL
118 4 HARDNESS TESTING PROCEDURE
5 PERMANENT SET LIMITS
Tables
TABLE 1 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CARBON SPRING STEEL)
119 Figures
Fig. 1 Permanent Set Measurements For Type NA8 Rings
FIG. 2 PERMANENT SET MEASUREMENTS FOR TYPE NAS RINGS
TABLE 2 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CORROSION-RESISTANT STEEL)
120 6 WORKMANSHIP
7 ADDITIONAL DATA
TABLE 3 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (BERYLLIUM COPPER)
121 TABLE 4 ILLUSTRATION
122 TABLE 4 NA7 BOWED BASIC EXTERNAL RETAINING RINGS
124 TABLE 5 ILLUSTRATION
125 TABLE 5 NAB BOWED BASIC INTERNAL RETAINING RINGS
126 TABLE 6 ILLUSTRATION
127 TABLE 6 NA9 BOWED (E· TYPE) EXTERNAL RETAINING RINGS
128 MANDATORY APPENDICES
MANDATORY APPENDIX I BOWED EXTERNAL SERIES NA7
132 MANDATORY APPENDIX II BOWED INTERNAL SERIES NAB
136 MANDATORY APPENDIX III BOWED E-RING EXTERNAL SERIES NA9
140 NONMANDATORV APPENDICES
NONMANDATORV APPENDIX A TYPE NA7 REFERENCE METRIC VALUES (DIMENSIONS)
144 NONMANDATORY APPENDIX B TYPE NA7 REFERENCE METRIC VALUES (SUPPLEMENT ARY INFORMATION)
148 NONMANDATORV APPENDIX C TYPE NAS REFERENCE METRIC VALUES (DIMENSIONS}
150 NONMANDATORY APPENDIX D TYPE NA8 REFERENCE METRIC VALUES (SUPPLEMENT ARY INFORMATION)
152 NONMANDA TORY APPENDIX E TYPE NA9 REFERENCE METRIC VALUES (DIMENSIONS)
154 NONMANDATORY APPENDIX F TYPE NA9 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
156 ASME B18.27.4
ASME B18.27.4 Contents
158 1 INTRODUCTORY NOTES
159 2 GENERAL DATA
3 MATERIAL
160 4 HARDNESS TESTING PROCEDURE
5 PERMANENT SET LIMITS
Tables
TABLE 1 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CARBON SPRING STEEL)
161 TABLE 2 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CORROSION-RESIST ANT STEEL)
TABLE 3 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (BERYLLIUM COPPER)
162 Figures
FIG. 1 PERMANENT SET MEASUREMENTS FOR TYPE NA 10 RINGS
FIG. 2 PERMANENT SET MEASUREMENTS FOR TYPE NA 11 RINGS
FIG. 3 PERMANENT SET MEASUREMENTS FOR TYPE NA 12 RINGS
FIG. 4 PERMANENT SET MEASUREMENTS FOR TYPE NA 13 RINGS
163 6 IRREGULARITY LIMITATIONS
7 WORKMANSHIP
8 ADDITIONAL DATA
TABLE 4 DISH LIMITATIONS
TABLE 5 PITCH LIMITATIONS
164 TABLE 6 ILLUSTRATION
165 TABLE 6 NA10 INVERTED EXTERNAL RETAINING RINGS
166 TABLE 7 ILLUSTRATION
167 TABLE 7 NA11 INVERTED INTERNAL RETAINING RINGS
168 TABLE 8 ILLUSTRATION
169 TABLE 8 NA12 BEVELED EXTERNAL RETAINING RINGS
171 TABLE 9 ILLUSTRATION
172 TABLE 9 NA13 BEVELED INTERNAL RETAINING RINGS
174 MANDATORY APPENDICES
MANDATORY APPENDIX I INVERTED EXTERNAL SERIES NA 10
178 MANDATORY APPENDIX II INVERTED INTERNAL SERIES NA 11
182 MANDATORY APPENDIX III BEVELED EXTERNAL SERIES NA12
186 MANDATORY APPENDIX IV BEVELED INTERNAL SERIES NA 13
190 NONMANDATORV APPENDICES
NONMANDATORV APPENDIX A TYPE NA 10 REFERENCE METRIC VALUES (DIMENSIONS)
192 NONMANDATORY APPENDIX B TYPE NA10 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
194 NONMANDATORV APPENDIX C TYPE NA 11 REFERENCE METRIC VALUES (DIMENSIONS)
196 NONMANDATORV APPENDIX D TYPE NA 11 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
198 NONMANDATORY APPENDIX E TYPE NA12 REFERENCE METRIC VALUES (DIMENSIONS)
202 NONMANDATORY APPENDIX F TYPE NA 12 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
204 NONMANDATORY APPENDIX G TYPE NA13 REFERENCE METRIC VALUES (DIMENSIONS)
208 NONMANDATORY APPENDIX H TYPE NA13 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
212 ASME B18.27.5
ASME B18.27.5 Contents
214 1 INTRODUCTORY NOTES
215 2 GENERAL DATA
3 MATERIAL
216 4 HARDNESS TESTING PROCEDURE
5 EXPANDABILITY AND CRACKING TESTS
Tables
TABLE 1 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CARBON SPRING STEEL}
217 6 IRREGULARITY LIMITATIONS
7 WORKMANSHIP
TABLE 2 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (CORROSION-RESISTANT STEEL)
218 Figures
FIG. 1 DISH FOR TYPES NA14 AND NA15
FIG. 2 PITCH FOR TYPES NA14 AND NA15
TABLE 3 HARDNESS RANGES FOR TAPERED AND REDUCED CROSS SECTION RETAINING RINGS (BERYLLIUM COPPER)
TABLE 4 DISH LIMITATIONS
TABLE 5 PITCH LIMITATIONS
219 8 ADDITIONAL DATA
220 TABLE 6 ILLUSTRATION
221 TABLE 6 NA14 EXTERNAL SELF-LOCKING RETAINING RINGS
222 TABLE 7 ILLUSTRATION
223 TABLE 7 NA15 EXTERNAL INTERLOCKING RETAINING RINGS
224 TABLE 8 NA16 EXTERNAL BOWED LOCKING PRONGS RETAINING RINGS
226 MANDATORY APPENDICES
MANDATORY APPENDIX I EXTERNAL SELF-LOCKING SERIES NA 14
228 MANDATORY APPENDIX II EXTERNAL INTERLOCKING SERIES NA 15
232 MANDATORY APPENDIX III EXTERNAL BOWED LOCKING PRONGS SERIES NA16
234 NONMANDATORY APPENDICES
NONMANDATORY APPENDIX A TYPE NA14 REFERENCE METRIC VALUES (DIMENSIONS)
236 NONMANDATORY APPENDIX B TYPE NA14 REFERENCE METRIC VALUES (SUPPLEMENT ARY INFORMATION)
238 NONMANDATORY APPENDIX C TYPE NA15 REFERENCE METRIC VALUES (DIMENSIONS)
240 NONMANDATORY APPENDIX D TYPE NA15 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)
242 NONMANDATORY APPENDIX E TYPE NA16 REFERENCE METRIC VALUES (DIMENSIONS)
244 NONMANDATORV APPENDIX F TYPE NA16 REFERENCE METRIC VALUES (SUPPLEMENTARY INFORMATION)

Related products

ASME B18.27 1998 R2017
$75.42