🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME B30.18 2021

ASME B30.18 2021

$98.04

ASME B30.18 – 2021 Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist)

Published By Publication Date Number of Pages
ASME 2021
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

B30.18 applies to the construction, installation, operation, inspection, and maintenance of hand-powered and power-driven overhead and gantry cranes that have a top or under running multiple girder bridge with a vertically guided carriage, with or without a top or under running trolley. The requirements included in this volume also apply to stacker cranes having the same fundamental characteristics, such as cantilever gantry and semi-gantry stacker cranes.

PDF Catalog

PDF Pages PDF Title
4 CONTENTS
6 FOREWORD
8 ASME B30 COMMITTEE ROSTER
10 B30 STANDARD INTRODUCTION
13 ASME B30.18-2021 SUMMARY OF CHANGES
14 Chapter 18-0 Scope, Definitions, Personnel Competence, and References
SECTION 18-0.1: SCOPE OF B30.18
SECTION 18-0.2: DEFINITIONS
18-0.2.1 Types of Equipment
18-0.2.2 General
15 Figures
Figure 18-0.2.1-1 Cab-Operated Stacker Crane
16 Figure 18-0.2.1-2 Floor-Operated Stacker Crane
17 Figure 18-0.2.1-3 Underhung Stacker Crane Movement
19 SECTION 18-0.3: PERSONNEL COMPETENCE
SECTION 18-0.4: REFERENCES TO OTHER CODES AND STANDARDS
21 Chapter 18-1 General Construction and Installation
SECTION 18-1.1: MARKING
18-1.1.1 Rated Load Markings — Crane
18-1.1.2 Manufacturer’s Identification Markings
18-1.1.3 Warnings
18-1.1.4 Technical and Safety-Related Information
SECTION 18-1.2: CLEARANCES
18-1.2.1 Clearance From Obstruction
22 18-1.2.2 Clearance Between Noninterlocking Parallel Cranes
SECTION 18-1.3: GENERAL CONSTRUCTION — RUNWAYS AND SUPPORTING STRUCTURES
18-1.3.1 Foundations and Anchorages
18-1.3.2 Crane Runways
SECTION 18-1.4: STACKER CRANE CONSTRUCTION
18-1.4.1 Welded Construction
18-1.4.2 Bridge Structure
18-1.4.3 Molten Metal
18-1.4.4 Modifications
SECTION 18-1.5: CABS
18-1.5.1 Cab Construction
23 18-1.5.2 Access to Stacker Crane
18-1.5.3 Tool Box
18-1.5.4 Fire Extinguisher
18-1.5.5 Lighting
SECTION 18-1.6: FOOTWALKS AND LADDERS
18-1.6.1 Location of Footwalks
18-1.6.2 Construction of Footwalks
18-1.6.3 Toeboards and Handrails for Footwalks
18-1.6.4 Ladders and Stairways
18-1.6.5 Egress
SECTION 18-1.7: STOPS, BUMPERS, RAIL SWEEPS, AND GUARDS
18-1.7.1 Trolley Stops
18-1.7.2 Bridge Bumpers (Buffers)
24 18-1.7.3 Trolley Bumpers (Buffers)
18-1.7.4 Rail Sweeps
18-1.7.5 Wheel and Truck Frames
18-1.7.6 Guards for Moving Parts
SECTION 18-1.8: BRAKES
18-1.8.1 Brakes for Stacker Crane Hoists
25 18-1.8.2 Hoist Holding Brakes
18-1.8.3 Hoist Controlled Braking Means
18-1.8.4 Brakes for Stacker Crane Trolleys and Bridges (Cab Operated)
18-1.8.5 Brakes for Stacker Crane Trolleys and Bridges (Floor and Remote Operated, Including Skeleton Cab Operated)
18-1.8.6 Stacker Crane Trolley and Bridge Braking Means
18-1.8.7 Application of Stacker Crane Trolley Brakes
26 18-1.8.8 Application of Stacker Crane Bridge Brakes
SECTION 18-1.9: ELECTRICAL EQUIPMENT
18-1.9.1 General
18-1.9.2 Equipment
18-1.9.3 Controllers
27 Figure 18-1.9.3-1 Recommended Arrangement of Controllers or Master Switches (Three-Motor Crane)
Figure 18-1.9.3-2 Recommended Arrangement of Controllers or Master Switches (Four-Motor Crane)
28 Figure 18-1.9.3-3 Recommended Arrangement of Controllers (Pendant Push-Button Station Arrangement)
Figure 18-1.9.3-4 Recommended Arrangement of Controllers (Radio Crane Control Transmitter Lever Arrangement)
29 18-1.9.4 Resistors
18-1.9.5 Switches
18-1.9.6 Runway Conductors
18-1.9.7 Extension Lamps
SECTION 18-1.10: HOISTING EQUIPMENT
18-1.10.1 Sheaves
18-1.10.2 Drums
18-1.10.3 Rope
30 18-1.10.4 Equalizers
18-1.10.5 Guards for Hoisting Ropes
SECTION 18-1.11: WARNING DEVICES
SECTION 18-1.12: LUBRICATION
31 Chapter 18-2 Inspection, Testing, and Maintenance
SECTION 18.2.1: INSPECTION
18-2.1.1 General
18-2.1.2 Inspection Classification
18-2.1.3 Frequent Inspection
18-2.1.4 Periodic Inspection
32 18-2.1.5 Stacker Cranes Not in Regular Use
18-2.1.6 Inspection Records
SECTION 18-2.2: TESTING
18-2.2.1 Operational Tests
18-2.2.2 Rated Load Test
SECTION 18-2.3: MAINTENANCE
18-2.3.1 Preventive Maintenance
18-2.3.2 Maintenance Procedure
33 18-2.3.3 Adjustments and Repairs
18-2.3.4 Lubrication
SECTION 18-2.4: ROPE INSPECTION, REPLACEMENT, AND MAINTENANCE
18-2.4.1 General
18-2.4.2 Rope Inspection
34 18-2.4.3 Rope Replacement
18-2.4.4 Rope Maintenance
SECTION 18-2.5: TRANSLATION OF TECHNICAL AND SAFETY-RELATED INFORMATION AND MANUAL(S)
35 Chapter 18-3 Operation
SECTION 18-3.1: QUALIFICATIONS AND RESPONSIBILITIES
18-3.1.1 Operators
18-3.1.2 Qualifications for Operators
18-3.1.3 Responsibilities
36 SECTION 18-3.2: TRANSLATION OF TECHNICAL AND SAFETY-RELATED INFORMATION AND MANUAL(S)
SECTION 18-3.3: CONDUCT OF OPERATORS
SECTION 18-3.4: HANDLING THE LOAD
18-3.4.1 Load Weight
18-3.4.2 Moving the Load
37 18-3.4.3 Hoist Limit Devices (Switches)
SECTION 18-3.5: MISCELLANEOUS
18-3.5.1 Ladders
18-3.5.2 Cabs
18-3.5.3 Fire Extinguishers
18-3.5.4 Crane Lockout/Tagout

Related products

ASME B30.18 2021
$98.04