šŸ”„šŸ”„ Donā€™t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

šŸ”
ASME BPVC CC BPV 2010

ASME BPVC CC BPV 2010

$290.00

ASME BPVC CODE CASES: Boilers and Pressure Vessels-2010

Published By Publication Date Number of Pages
ASME 2010
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. Weā€™re here to assist you 24/7.
Email:[email protected]

None

PDF Catalog

PDF Pages PDF Title
7 INDEX TO NEW AND REVISED CASES
9 SUMMARY OF CHANGES
11 NUMERIC INDEX
19 SUBJECT INDEX
27 CASES OF ASME BOILER AND PRESSURE VESSEL CODE
Case 1325-18 Nickel-Iron-Chromium Alloys 800 and 800H(UNS N08800 and N08810) and Nickel-Iron-Chromium-Molybdenum-Copper Low-Carbon Alloy (UNSN08028) Section I
29 Case 1518-5 Weld Joint Examination for Pneumatically Tested PressureVesselsSection VIII, Division 1
31 Case 1750-22 Materials for Bodies, Bonnets, Yokes, Housings, and Holders of Pressure Relief Devices Sections I; VIII, Division 1; and X
35 Case 1827-3 Nickel-Chromium-Iron (Alloy N06600) for Water-Wetted Service Section I
37 Case 1849-1 Gray Cast Iron Castings Section I
39 Case 1855-1 Section VIII, Division 1, Unfired Steam Boiler in Section I System Section I
41 Case 1876-3 Design of Safety Valve Connections Section I
45 Case 1918 Attachment of Nozzles or Couplings to a Boiler Vessel After Postweld Heat Treatment Section I
47 Case 1923-4 Restricting Lift to Achieve Reduced Relieving Capacities of Full Lift, Nozzle Type, Flat Seated Safety and Safety Relief Valves Section I
49 Case 1924-2 Nickel-Molybdenum-Chromium Alloy (UNS N10276) Section I
51 Case 1932-5 SA-736/SA-736M Plates and ASTM A 859/A 859M-95 Forgings Section VIII, Divisions 1, 2, and 3
53 Case 1934 Alternative Rules for Heat Treatment of Boiler External Piping Section I
55 Case 1935-4 Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Section I
57 Case 1936-3 Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825) for Water Wetted Service Section I
59 Case 1949-4 Forgings of Nickel-Iron-Chromium Alloys N08800 and N08810 Section I
61 Case 1968-1 Use of Acoustic Emission Examination in Lieu of Radiography Section VIII, Division 1
63 Case 1993-6 Precipitation-Hardening Nickel Alloy (UNS N07718) Used as Bolting Material Section I
65 Case 1998 Drilled Holes Not Penetrating Through Vessel Wall Section I
67 Case 2016-1 Alternative Requirements for Seal Welding of Threaded Connections, UF-32(b) Section VIII, Division 1
69 Case 2038-5 25Cr-22Ni-2Mo-N, UNS S31050, Austenitic Stainless Steel Forgings Section VIII, Divisions 1 and 2
71 Case 2055-2 Pneumatic Testing of Pressure Vessels, UG-20 Section VIII, Division 1
73 Case 2056-1 Use of SA-333, Grade 6 Seamless and Welded Steel Pipe Section I
75 Case 2063-6 Ni-22Cr-14W-2Mo-La Alloy (UNS N06230) Section I
77 Case 2068-3 UNS S32550 Plates Section VIII, Division 2
79 Case 2073-1 SA-487 Grade CA6NM Class A Section I
81 Case 2091-3 Buckling Pin Pressure Relief Devices Section VIII, Division 1
83 Case 2093 A 439 Type D-2 Austenitic Ductile Iron Section VIII, Division 1
85 Case 2096-2 Nondestructive Examination As an Alternative to Hydrostatic Testing for SA-376 Section II, Part A
87 Case 2115-3 Austenitic Stainless Steel Tubes, SA-213/SA-213M, Grade TP310HCbN, UNS S31042 Section I
89 Case 2116-2 Sole Use of Metric Units for Pressure Relief Device Nameplates Sections VIII, Divisions 1 and 2, and X
91 Case 2120-1 Nickel-Iron-Chromium-Molybdenum-Copper Low Carbon Alloy (UNS N08926) for Code Construction Section VIII, Division 1
93 Case 2127-3 Type 304LN (Alloy UNS S30453) Austenitic Stainless Steel Section VIII, Division 1
97 Case 2130-4 ASTM A 841/A 841M-98 ļæ½ Plate Section VIII, Divisions 1, 2, and 3
99 Case 2142-3 F-Number Grouping for Ni-Cr-Fe Filler Metals Section IX
101 Case 2143-1 F-Number Grouping for Ni-Cr-Fe, Classification UNS W86152 Welding Electrode Section IX (Applicable to all Sections, including Section III, Division 1, and Section XI)
103 Case 2146 24Cr-17Ni-6Mn-4.5Mo-N, UNS S34565, Austenitic Stainless Steel Forgings, Bar, Fittings, Welded and Seamless Pipe and Tube, Plate, Sheet, and Strip Section VIII, Division 1
107 Case 2148-1 Use of Rod and Bar for Nozzle Necks Section VIII, Division 1
109 Case 2150 Large-End Cone-to-Cylinder Junction for 30 < ļæ½ ā‰¤ 60 Degrees Section VIII, Division 1
115 Case 2151-1 3 Chromium-1 Molybdenum-1ā„4 Vanadium-Columbium-Calcium Alloy Steel Plates and Forgings Section VIII, Divisions 1 and 2
117 Case 2153-1 Use of Semi-Permanent Mold Cast Aluminum Alloy A356.0 for the Manufacture of Heating Boilers Under Part HC Section IV
119 Case 2155 Use of Rod and Bar for Heads Section VIII, Division 1
121 Case 2156-1 Use of Rod and Bar for Hollow Cylindrical-Shaped Parts Larger Than NPS 4 Section VIII, Division 1
123 Case 2172 Use of B 43 Seamless Red Brass Pipe (UNS C23000) With Drawn General Purpose Temper (H58) for Threaded Piping for Construction of PMB and PEB Miniature Electric Boilers Section I
125 Case 2179-7 Seamless 9Cr-2W Material Section I and Section VIII, Division 1
127 Case 2180-5 Seamless 12Cr-2W Material Sections I and VIII, Division 1
129 Case 2192-6 Modified 9Cr-1Mo-V Cast Material Section I
131 Case 2195-1 24.5Cr-22Ni-7.5Mo-3Mn-N Austenitic Stainless Steel (UNS S32654) Section VIII, Division 1
133 Case 2196-1 Austenitic Stainless Steel Seamless Tubes and Pipe (18Cr-11Ni-Cb-N), UNS S34751 Section VIII, Division 1
135 Case 2197-1 18.5Cr-15.5Ni-4.5Mo-N Alloy (UNS S31726) Austenitic Stainless Steel Section VIII, Division 1
137 Case 2199-5 2.25Cr-1.6W-V-Cb Material Section I
141 Case 2203-1 Omission of Lifting Device Requirements for PressureRelief Valves on Air, Water Over 140Ā°F, or SteamService Section VIII, Division 1
143 Case 2205 Alternate Rules for Heat Treatment of Repair Weldsto Castings Section VIII, Division 1
145 Case 2217-5 Precipitation-Hardening Ni-Cr-Mo Alloy(UNS N07725) Section VIII, Divisions 1, 2, and 3
147 Case 2222-2 Precipitation-Hardening Nickel Alloy (UNS N07718)Used as Pressure Retaining Component Material Section VIII, Divisions 1 and 2
149 Case 2223-3 Use of SA-705 Type 630 Forgings (UNS S17400) andSA-693 Type 630 Plate (UNS S17400) Section VIII, Divisions 1 and 2
151 Case 2224-2 Use of 304L Stainless Steel at Elevated Temperatures Section VIII, Division 1
153 Case 2226-2 Ni-Cr-Mo Alloy UNS N06022 for Code Constructionfor Temperatures up to 1250Ā°F Section I
155 Case 2229 Design of Layered Vessels Using Flat Ribbon WoundCylindrical Shells Section VIII, Division 1
161 Case 2230-2 Use of Ni-Al Bronze C95820 Sand Castings for Pressure Vessels Section VIII, Division 1
163 Case 2235-9 Use of Ultrasonic Examination in Lieu of Radiography Section I; Section VIII, Divisions 1 and 2; and Section XII
173 Case 2239-1 Use of Permanent Mold Cast Aluminum Alloys UNS A13560 and A03570 Section VIII, Division 1
175 Case 2244-2 UNS J93380 (CD3MWCuN) Section VIII, Division
179 Case 2245-125Cr-7.5Ni-3.5Mo-N-Cu-W Alloy, UNS S32760 Forgings, Plate, Sheet, Strip, Bar, Seamless and Welded Pipe and Tube, and Fittings Section VIII, Division 1
183 Case 2247 Alternative Pressure Test Procedure to UG-99 andUG-100 for the Construction of Multistream Aluminum Vacuum Brazed Plate-Fin Heat Exchangers Section VIII, Division 1
185 Case 2249 Use of Furnace Brazing for Lethal Service Section VIII, Division 1
187 Case 2254 Changeover Valves Installed Between Safety Valves or Safety Relief Valves and Boilers Section I
189 Case 2256 Valve Markings Section IV
191 Case 2260-1 Alternative Rules for Design of Ellipsoidal and Torispherical Formed Heads Section VIII, Division
193 Case 2268-1 Use of Annealed C12200 Alloy Welded Tubing Section VIII, Division 1
195 Case 2270 Ultrasonic Examination of Welds Made by the Electron Beam Process Section VIII, Division 1
197 Case 2276-1 Austenitic Ni-Cr-Mo-Nb Alloy (UNS N06626)Section VIII, Division 1
199 Case 2277 Use of 17Cr-4Ni-4Cu (UNS S17400) Section VIII, Division 2
201 Case 2286-4 Alternative Rules for Determining Allowable External Pressure and Compressive Stresses for Cylinders,Cones, Spheres, and Formed Heads Section VIII, Division 1
217 Case 2295-3 29Cr-6.5Ni-2Mo-N Austenitic-Ferritic Stainless Steel UNS S32906 Section VIII, Divisions 1 and 2
219 Case 2296 Use of Titanium-Clad Carbon Steel Plate in the As-Rolled Condition Section VIII, Divisions 1 and 2
221 Case 2297 F-Number Grouping for 9Cr-1Mo-V FCAW Consumable Section IX (Applicable to all sections, including Section III, Division I, and Section XI)
223 Case 2299 Alternative Rules for Outside Diameter Tolerance forPipe Section VIII, Divisions 1 and 2
225 Case 2300 Use of SA-372 Grade E Class 55, Grade J Class 55,and Grade F, G, and H Class 55 and 65 Forgings,Quenched and Tempered Section VIII, Division 1
227 Case 2304-2 Austenitic Fe-35Ni-27Cr Alloy (UNS S35045)Section I and Section VIII, Division
229 Case 2305-1 Exemption From Postweld NDE Requirements ofUG-93(d)(4)(b) on Fig. UW-13.2(d) Construction Section VIII, Division 1
231 Case 2309 Alternative Rules for Ultrasonic Examination of Cladding and Base Metal Clad Interfaces Section V
233 Case 2313 Electric Resistance and Autogenous Welded Tubing With 100% Longitudinal Weld Joint Factor for Use in Feedwater Heaters Section VIII, Division
235 Case 2315-1 Ni-33Fe-25Cr Alloy (UNS N08120) for Code Construction Section VIII, Division 1
237 Case 2318 Alternative Flanged Joint Design for Nuclear Material Fluidized Bed Reactors Section VIII, Division I
239 Case 2321-1 Exemption From Postweld Heat Treatment for P-No. 4 or P-No. 5A Tube-to-Tubesheet Seal Welds Section VIII, Division 1
241 Case 2324 Use of Automated Ultrasound Leak Detection Systemin Lieu of Visual Inspections Required by UG-100(d)Section VIII, Division 1
243 Case 2326-1 Qualification of Welders and Welding Operators by Ultrasonic Examination Section IX
245 Case 2327-29 Cr-1Mo-1W-Cb Material Section I
249 Case 2328-1 Austenitic Stainless Steel Seamless Tubes (18Cr-9Ni-3Cu-Cb-N) Section I
251 Case 2329-1 Use of SA-278 Material for Part HLW Construction ofLined Headers Section IV
253 Case 2330-1 Local Thin Areas in Spherical Segments of Heads Section I
255 Case 2331-1 Local Thin Areas in Cylindrical Shells Section I
257 Case 2334 Single Fillet Lap Joints in the Shell of a Shell-and-TubeHeat Exchanger Section VIII, Division 1
259 Case 2335 Use of ASTM A 553/A 553M-95 Section VIII, Divisions 1 and 2
261 Case 2344-2 Use of Sand Cast Aluminum Alloy A356.0, T6 Temper,for the Manufacture of Hot Water Heating Boilers Under Part HC Section IV
263 Case 2346-1 Alternative Rules for Ellipsoidal or TorisphericalHeads Having Integral Backing Strip Attachedto Shells Section VIII, Division 1
265 Case 2349-1 Alternative Rules for Corner Joint Fabrication Section VIII, Division 1
267 Case 2350 Strength of Aluminum Brazed Joints Up to 400Ā°F Section VIII, Division 1
269 Case 2351 Alternative Rules for Brazing Qualifications Section VIII, Division 1
271 Case 2353-1 Seamless 1.15Ni-0.65Cu-Mo-Cb Material Section I
273 Case 2357-2 Ni-Fe-Cr Alloy N08801 for Water-Wetted Service Section I
275 Case 2358 ASTM A 1010-00 (UNS S41003) Material Section VIII, Division
277 Case 2359-2 Ni-25Cr-9.5Fe-2.1Al Alloy (UNS N06025)Section I and Section VIII, Division
279 Case 2361 Alternative Stresses That May Be Used in the Equation in UG-101(k) for Calculating the Maximum Allowable Working Pressure at Design Temperature Section VIII, Division
281 Case 2362 Copper Alloy (UNS C10100 and UNS C10300) for Code Construction Section VIII, Division 1
283 Case 2364 Carbon Manganese Steel Plate, SA-299/SA-299M Section I
285 Case 2367-1 Marking of Rupture Disk Devices Fully Enclosed in a Rupture Disk Holder or System Section VIII, Divisions 1 and 2
287 Case 2369 Alternative Rules for Pressure Testing Vessels Utilizinga Bolted Flat Blind Flange as Removable or Remote End Closures Section VIII, Division 1
289 Case 2377 Radiographic Requirements for SA-612 Steel Plate Section VIII, Division 1
291 Case 2378 Use of a Power Actuated Pressure Relief Valve for High Pressure Vessels Instead of Pressure Relief Valves or Rupture Disks Section VIII, Division 3
293 Case 2382-4 Use of Sand Cast Aluminum Alloy ENAC-AlSi10Mg(a), F Temper, in the Manufacture of HotWater Heating Boilers Under Part HC Section IV
295 Case 2385-1 37Ni-30Co-28Cr-2.75Si Alloy (UNS N12160)Section VIII, Division 1
297 Case 2390-5 Composite Reinforced Pressure Vessels Section VIII, Division 3
321 Case 2394-1 Use of Impregnation to Correct Seepage Leaks in Aluminum Alloy Sand Castings Section IV
323 Case 2395 Certification of Rupture Disk Device With No Outlet Connection Section VIII, Division 1
325 Case 2396 Alternative Method of Vessel Markings Section VIII, Division 1
327 Case 2397 Pressure Relief Valves That Exceed the Capability ofTesting Laboratories Sections I and VIII, Division 1
329 Case 2400 Alternative Rules for the Postweld Heat Treatment of Finned Tubes Section VIII, Division 1
331 Case 2401 ASME SA-240 Type 316 Plate Section VIII, Division
333 Case 2402 SA-995, UNS J92205, (CD3MN), Austenitic/FerriticDuplex Stainless Steel Section VIII, Division 1
335 Case 2403 Aluminum Alloy (Aluminum-6.3Magnesium) for Code Construction Section VIII, Division 1
337 Case 2404-1 Copper Beryllium Alloy (UNS C17510) for Code Construction Section VIII, Division 1
341 Case 2407 Pneumatic Test Section VIII, Division
343 Case 2408-1 Alternative Method of Pressure Relief Device Marking Section VIII, Divisions 1 and 2
345 Case 2410 Low Silicon, Aluminum Killed Forgings to SA-508 Grade 4N, Class 1, 2, or 3 Section VIII, Division
347 Case 2411 Use of Polymer Material for Bolted Box Headers Section IV
351 Case 2413-1 Intermodal Transport Tanks Section VIII, Division 2
353 Case 2416 Use of 15Cr-5Ni-3Cu (UNS S15500) Section VIII, Division 2
355 Case 2418-1SA-182, SA-240, and SA-479 21Cr-5Mn-1.5Ni-Cu-N(UNS S32101) Austenitic-Ferritic Duplex Stainless Steel Section VIII, Division 1
357 Case 2419 Use of SA-268 Ferritic Stainless Steel Welded Tubing,TP430 Ti, UNS S43036 Section VIII, Division 1
359 Case 2421 Single Fillet Lap Joint for Heat Exchanger Tube Welds Section VIII, Division 1
361 Case 2424 Alternative Attachment Details for Welded Stayed Construction Using Dimpled or Embossed Plate Section VIII, Division 1
363 Case 2425-2 Titanium Aluminum Vanadium Ruthenium Alloy(Ti-3Al-2.5V-0.1Ru) UNS R56323 Section VIII, Division 1
365 Case 2426Titanium Nickel-Molybdenum Ruthenium Alloy,Ti-0.8Ni-0.3Mo-0.1Ru Section VIII, Division 1
367 Case 2427 Chromium-Nickel-Molybdenum-Nitrogen-TungstenDuplex Stainless Steel UNS S39274 Plate Section VIII, Division 1
369 Case 2428-2 Attachment of Tubes to Flat Tubesheets Using Complete Penetration Welds Section I and Section VIII, Division 1
371 Case 2430 Use of A 213/A 213M-04 UNS S31060 Austenitic Stainless Steel Seamless Tubing and A 240/A 240M-04a1UNS S31060 Austenitic Stainless Steel Plate Sections I and VIII, Division 1
377 Case 2432-1 Use of 5052-H32, 6061-T6, and 6061-T651 Temper Aluminum Alloys in Part HF of Section IV, for Construction of Heating Boilers Sections IV and II-B
381 Case 2437-1 Rules for Diffusion Bonded, Flat Plate, Microchannel Heat Exchanger Section VIII, Division
383 Case 2439 Ni-Cr-Co-Mo Alloy (UNS N06617) Section I
385 Case 2440 Use of Mn-1ā„2Mo-1ā„2Ni (UNS K12039) Pipe Section I
387 Case 2445-1 23Cr-25Ni-5.5Mo-N, UNS S32053, Austenitic Stainless Steel Section VIII, Division 1
389 Case 2446 Pilot-Operated Pressure Relief Valves for PG-67.2.6 Applications Section I
391 Case 2448 Nameplate Location Section VIII, Division
393 Case 2449 Nozzles With Corner Radius Section VIII, Division 1
395 Case 2450 Use of UNS S38815 Stainless Steel to 800Ā°F (427Ā°C) Section VIII, Division 1
397 Case 2451-1 Steel Plates Produced by Thermomechanical Control Process (TMCP) Section VIII, Division 3
399 Case 2456 SA-451, Grades CPF3M and CPF8M Section VIII, Division 1
401 Case 2458-3 Austenitic Fe-27Ni-22Cr-7Mo-Mn-Cu-N Alloy (UNSS31277) Section I and Section VIII, Division 1
407 Case 2461 Use of Chromium-Silicon Alloy Steel Wire for Pressure Vessel Winding Section VIII, Division 3
409 Case 2463 Welding of Tubes to Tubesheets by Deformation Resistance Welding (DRW) Process Section VIII, Division 1
413 Case 2468 Use of Nickel-Chromium-Molybdenum-Columbium Alloy UNS N06625 Section VIII, Division
415 Case 2469-1 Pneumatic Testing Section IV
417 Case 2473 F-Number Grouping for Cr-Fe-Ni-Mo-Cu, Classification UNS R20033 Filler Metal Section IX
419 Case 2475 18Cr-9Ni-2.5W-V-Cb Austenitic Seamless Tube Steel Section I
421 Case 2476 Radiography Using Phosphor Imaging Plate Section V
423 Case 2477 Use of SA/BS EN 10028-31, Grade P460NL1, Fine Grain Normalized Steel Plates Section VIII, Division 2
425 Case 2478 Use of SB-247, 6061-T6 Aluminum Alloy Section VIII, Division 2
429 Case 2481 Ni-29Cr-3.5Fe-3.3Al-1.5Nb Alloy (UNS N06693)Section VIII, Division 1
431 Case 2483 Use of Aluminum Alloy EN AC-AlSi7Mg Sand Castingsin F Temper Condition Meeting All Requirements ofBS EN1706 1998 Section IV
433 Case 2484 58Ni-33Cr-8Mo Alloy (UNS N06035) Section VIII, Division 1
435 Case 2485 Steam Drum in Heat Recovery Steam Generator System Section I
437 Case 2487 Breaking Pin Pressure Relief Devices Section VIII, Division 1
439 Case 2488-2 UNS S31803 Plates and Seamless and Welded Pipe andTube and Forgings and Fittings and Bar Section I
441 Case 2489 Use of SA-508 Class 1, Grades 2 and 3 Forgings Section I
443 Case 2493 Parallel Plate Explosion Welding for Butt Joints Between Dissimilar Metals Section IX
447 Case 2494 Corrosion-Resistant Cu-Sb Carbon Steel Tube Section I
449 Case 2496 27Cr-7.6Ni-1Mo-2.3W-N Austenitic-Ferritic Stainless Steel Seamless Tubing and Pipe Section VIII, Divisions 1 and 2
451 Case 2497-3 Unalloyed and Palladium or Ruthenium CorrosionEnhanced Titanium Grades With 58 ksi Minimum UTS, UNS R50400, R52400, R52402, and R52404 Section VIII, Division 1
455 Case 2498 Use of SA/EN 10028-2, Grades P235GH and P265GHSteel Section VIII, Division 1
457 Case 2499 Alternative Rules for Calculating Tubesheet Shear Stress Section VIII, Division 1
459 Case 2500 Use of ASTM A 576 Hot-Wrought Carbon Steel Bars for Forming Fittings for HLW Construction Section IV
461 Case 2501-1 Use of Aluminum Alloy 6063-0 Conforming to SB-241/SB-241M in the Manufacture of Hot Water BoilersUnder Part HF Section IV
463 Case 2502 Use of Aluminum Alloy 6063-T5 in the Manufacture of Hot Water Heating Boilers Under Part HF Section IV
465 Case 2503-1 Use of UNS S32003 Stainless Steel Section VIII, Division 1
467 Case 2507 Minimum Thickness of Dimpled or Embossed Assemblies Per Appendix 17 Section VIII, Division 1
469 Case 2511 Requirements for Use of an Alternative Test Method Under PG-73.4.2.2 Section I
471 Case 2512 18Cr-10Ni-3Cu-Ti-Cb Seamless Austenitic Stainless Steel Tube Section I
475 Case 2513 Cold-Rolled Temper SB-152 Copper Plate for Code Construction Section VIII, Division 1
477 Case 2514-1 Use of SA-182 F22V, SA-336 F22V, SA-541 22V, SA-542Type D, Class 4a, and SA-832 22V to 850Ā°F (454Ā°C) Section VIII, Division 3
483 Case 2515 Use of ASTM A 514-00a Plate Material, All Grades Section VIII, Division 3
485 Case 2516 Use of Chromium-Silicon Alloy Steel Wire ASTM A 401/A 401M UNS G92540 Section VIII, Division 3
487 Case 2518-1 ASTM B 407-04 UNS N06811, 42Ni-29Cr-28Fe-Mo-N,Seamless Pipes and Tubes Section I
489 Case 2520 ASTM B 444-04 UNS N06852, 50Ni-21.5Cr-17.5Fe-9Mo-Nb, Solution Annealed Seamless Pipes and TubesSection I
491 Case 2523 Use of Metric Units Sections I; IV; V; VIII, Divisions 1, 2, and 3; IX; X;and XII
493 Case 2524-1 Use of EN 10025-2:2004, Steel Name S355J2+N(Steel Number 1.0577+N) Section VIII, Division 3
495 Case 2526 Use of 49Fe-24Ni-21Cr-6Mo-Cu-N (UNS N08367) Bolting Materials for Pressure Vessels Section VIII, Division 1
497 Case 2527 Pneumatic Testing of Pressure Vessels, U-1(j), UM Vessels Section VIII, Division
499 Case 2529 Drain Valve on Horizontal Helical Coil Watertube Boilers Section IV
501 Case 2530 Use of Power Actuated Pressure Relief System for High Pressure Vessels Instead of Pressure Relief Valves or Rupture Disks Section VIII, Division
503 Case 2531 Use of ASME B31.3, Chapter IX for Design of Rupture Disk Holders Section VIII, Division 3
505 Case 2532-2 Titanium Aluminum Vanadium Iron Alloy (Ti 4Al-2.5V-1.5Fe) Section VIII, Division 1
511 Case 2534 Use of SA-240 (UNS S43932) in Thickness LessThan 1ā„4 in. Section IV
513 Case 2537 Alternative Rules for Ellipsoidal or Torispherical Heads Having Integral Backing Strip Attached to Shells Section VIII, Division
515 Case 2538 Minimum Thickness of Furnace Brazed Plate Heat Exchanger Heads Section VIII, Division 1
517 Case 2541 Use of Manual Phased Array Ultrasonic Examination Section V
519 Case 2543 25Cr-6Ni-Mo-N, UNS S32506, Austenitic-Ferritic Duplex Stainless Steel Section VIII, Division 1
521 Case 2544-2 Tolerance for Formed Heads for External Pressure Design Conditions Section VIII, Division 1
523 Case 2545-1 Use of SB-210 Alloys 3003-O and 6061-T6 and SB-241Alloy 1100-O Tubes for Construction of Heating Boilers Section IV
525 Case 2546 Use of SA-240 Grade 904L (UNS N08904) Section IV
527 Case 2547 Alternatives to Flange Rigidity Requirements,Appendix 2-14 Section VIII, Division 1
529 Case 2553 Use of Nickel Alloy UNS N06230 in Construction of Boilers Section IV
531 Case 2554 Alternative Method to Area Replacement Rules for Openings Under Internal Pressure Section XII
533 Case 2555 Use of SA-240 Grade 410S (UNS S41008) in the Construction of Boilers Section IV
535 Case 2556-2 Method for Basing Design Values on Material Properties Affirmed by Material Manufacturers Section I and Section VIII, Divisions 1, 2, and 3
537 Case 2557 Use of Manual Phased Array S-Scan Ultrasonic Examination Per Article 4 Section V
539 Case 2558 Use of Manual Phased Array E-Scan Ultrasonic Examination Per Article 4 Section V
541 Case 2559 Section VIII, Division 2 Components in Boilers Section I
543 Case 2560 Pressure Vessels With Overpressure Protection by System Design for Application to Gas Turbine Systems Section VIII, Division 1
545 Case 2561 Use of Power-Actuated Pressure-Relief System for High-Pressure Vessels Instead of Pressure-Relief Valves or Rupture Disk sSection VIII, Division 3
547 Case 2562 Use of NF A 36-215,1 Grade P440 NJ4, Fine Grain Normalized Steel Plates Section VIII, Division 2
549 Case 2563 Aluminum Alloy, UNS A96061 Temper T6 and UNS A96061 Temper T651 Section VIII, Division 3
553 Case 2564-2 Impulsively Loaded Pressure Vessels Section VIII, Division 3
559 Case 2565 Mounting Safety and Safety Relief Valves for Coil TypeHeating Boilers Section IV
561 Case 2567 SA-705, Type XM-12, Conditions H1075, H1025, H925,and H900 Forging Materials Section VIII, Division 3
565 Case 2570 Copper Alloys Section IV
569 Case 2571-1 Use of SA-240, Grades 304L and 316L in Thickness Less Than 1ā„4 in. (6 mm) Section IV
571 Case 2573 Use of Aluminum Alloy 6063-T6 Conforming to SB-221 in the Manufacture of Heating Boilers Under Part HF Section IV
573 Case 2576 Use of ASTM A 672-06 and A 691-98(R2002) Electric-Fusion-Welded Pipe Section I
575 Case 2577 Use of 316L Stainless Steel at Elevated Temperatures Section VIII, Division 1
577 Case 2579-2 Composite Reinforced Pressure Vessels for Gaseous H2 Service Section VIII, Division 3
599 Case 2581 20Cr-25Ni-1.5Mo-Cb-N Seamless Austenitic Stainless Steel Tube Section I
601 Case 2582 UNS S31803 Plate and Seamless and Welded Pipe Section IV
603 Case 2583 Alternative Relief-Valve Sizing Section IV
605 Case 2585-1 23Cr-35Ni-7.5Mo-N, UNS N08354, Austenitic Alloy Section VIII, Division 1
607 Case 2586-1 25Cr-7.5Ni-4.5Mo-Co-N Austenitic-Ferritic Stainless Steel UNS S32707 Section VIII, Division 1
609 Case 2587 Alternative Rules for Designing U-Shaped Bellows Section VIII, Division 1
611 Case 2588 Ni-Cr-Mo Bolting Material UNS N06059,ASTM F 468-06 Section VIII, Division 1
613 Case 2589 SA-350, Grade LF2 Castings Section VIII, Division 3
615 Case 2590-1 Use of Noncertificate Holders for Welding Section VIII, Divisions 1 and 2
617 Case 2591 25Cr-20Ni Austenitic Stainless Steel UNS S31002 Section VIII, Division 1
619 Case 2592-1 Use of Welds That Are Not Ground or Machined Section VIII, Division 3
621 Case 2593-1 Use of Friction Stir Welding (FSW) for 5052 Aluminum Alloy Bellows Expansion Joints for Pressure Vessels Section VIII, Division 1
623 Case 2594 Use of EN 10028-3: 20031, Grade P460NL1, Fine Grain Normalized Steel Plates Section VIII, Division 2
625 Case 2595 Use of Materials in a Current Code Edition for a Boiler Constructed to an Earlier Code Edition Section I
627 Case 2596 Coldstretching of Austenitic Stainless Steel Pressure Vessels Section VIII, Division 1
631 Case 2597 Permit Testing a Single Forging to Represent Several Thicknesses Section VIII, Division 3
633 Case 2598 22Cr-15Ni-Cb-N Austenitic Stainless Steel SeamlessTubing Section I
637 Case 2599 Use of Linear Phased Array E-Scan Ultrasonic Examination Per Article 4 Section V
639 Case 2600 Use of Linear Phased Array S-Scan Ultrasonic Examination Per Article 4 Section V
641 Case 2601 Recertification of Materials for Construction Section VIII, Division 3
643 Case 2602-1 Dry Film Storage of Digital Radiographic Images Section V
645 Case 2603 Use of UNS S32101 Ferritic/Austenitic Stainless SteelPlate, Pipe, and Tube Section IV
647 Case 2604 Use of Pneumatic Testing on Individual Cast Aluminum Sections Section IV
649 Case 2605-1 Fatigue Evaluation for SA-182 F22V, SA-336 F22V,SA-541 22V, SA-542 Type D, Class 4a, and SA-832 Grade 22V at Temperatures Greater Than 371Ā°C(700Ā°F) and Less Than or Equal to 454Ā°C (850Ā°F) Section VIII, Division
659 Case 2606 Use of SA-350, Grade LF2, Class 1 Steel Forgings Section I
661 Case 2607 Use of SA-420, Grade WPL6 and Welded Steel Fittings Section I
663 Case 2608 Testing of Vessels Containing an Internal Piston Section VIII, Division
665 Case 2609 Use of Chromium-Silicon Alloy Steel Wire ASTMA 401/A 401M-03 UNS G92540 Section VIII, Division 3
667 Case 2610 SA-453, Grade 660, Class C, High Temperature Bolting Materials With Expansion Coefficients Comparable to Austenitic Steels Section VIII, Divisions 1 and 2
669 Case 2611 Use of SA/EN 10028-3, Grade P355N,1 Fine Grain Normalized Steel Plates Section VIII, Division 2
671 Case 2612 Nondestructive Examination as an Alternative to Hydrostatic Testing for SB-444 Section II, Part B
673 Case 2613 Phenolic Lining Material in HLW-200 Application Section IV
675 Case 2614 Alternative Lining Material in HLW-200 Application Section IV
677 Case 2615 Use of Sheet or Plate Material With Revised Minimum Thickness for HLW Water Heater and Storage Tank Construction Section IV
679 Case 26162014-T6 Aluminum Hand Forgings for Nonwelded Construction Section VIII, Division 1
681 Case 2617 18Cr-15Ni-4Mo-3Cu-N, UNS S31727, Austenitic Stainless Steel Section VIII, Division 1
683 Case 2618 Use of SB-148 C95500, As-Cast Temper, in the Manufacture of Heating Boilers, Part HF and Potable-Water Heaters, Part HLW Section IV
685 Case 2619 Use of ASTM A 414/A 414M-07 Section VIII, Division I
687 Case 2620 Use of UNS S32101 Ferritic/Austenitic Stainless Steel Plate, Pipe, and Tube in the Manufacture of Part HLW Water Heaters and Storage Tanks Section IV
689 Case 2621-1 Diffusion Bonding Section VIII, Division 1
691 Case 2623 Alternate Weld Size for Attachment of Flat Heads Forming a Corner Joint Section IV
693 Case 2624 Intermodal Transport Tanks (UN T50 Portable Tanks) Section VIII, Division 2
695 Case 2625 Alternative Rules for Determining Allowable Localized Compressive Stresses in Cone-Cylinder Junctions,Spherical Shells, and Hemispherical Heads Section VIII, Division 2
697 Case 2626 Minimum Thickness Requirements of Tubes in Air Cooled and Cooling Tower Heat Exchangers Section VIII, Divisions 1 and 2
699 Case 2627 Use of Aluminum Alloy EN AW-6060 T1 Extruded(Integrally) Finned Tube in the Manufacture of Hot Water Heating Boilers Section IV
701 Case 2628 Use of SB-241/SB-241M Grade 6063 T1 (UNS A96063)Aluminum Alloy Extruded (Integrally) Finned and Coiled Tube in the Manufacture of Hot Water Heating Boilers Section IV
703 Case 2629 Alloy UNS N06690 Up To 1200Ā°F (649Ā°C) Section VIII, Division 1
705 Case 2630 Use of Fatigue Analysis Screening, Method A For Vessels Made of 1.25Cr-0.5Mo-Si and 2.25Cr-1Mo SteelsSection VIII, Division
707 Case 2631 Titanium Aluminum Alloy, ASTM B 367-08b, Ti 3Al-2.5V or Ti 3Al-2.5V-0.05Pd Castings Section VIII, Division 1
709 Case 2632 Use of UNS N06625 Nickel Alloy (60Ni-22Cr-9Mo-3.5Cb) Annealed Grade 1 in Welded Tube, Plate, Sheet,and Strip Section I
711 Case 2633 Cast ASTM B 752-06 Zirconium Alloy Grades 702C and 705C Section VIII, Division
713 Case 2634 Inspection Openings in Small Pressure Vessels Section VIII, Division 1
715 Case 2635 Single Feedwater Source for Solar Fired Boiler Section I
717 Case 2636 ASTM A 240/A 240M-09a UNS S30530 SolutionAnnealed Austenitic Stainless Steel Plate and Sheet Section VIII, Division 1
719 Case 2637 UNS S32205 Plates, Bars, Seamless and Welded Pipe and Tube, Forgings, and Fittings Section VIII, Division 1
721 Case 2638 Alternative Piping Calibration Blocks Section V
723 Case 2639 25Cr-14Ni-Mo-Low C (UNS S30925) Seamless Austenitic Steel Tube Section I
725 Case 2640 Postponement of Mandatory Date for Compliance Section I
727 Case 2641 Titanium Nickel Molybdenum Alloy (Ti 0.8Ni-0.3Mo),Grade C-12 Castings Section VIII, Division 1

Related products

ASME BPVC CC BPV 2010
$290.00