ASME BPVC CC NC Edtn 2007
$377.00
ASME BPVC CODE CASES: Nuclear Components-2007
| Published By | Publication Date | Number of Pages |
| ASME | 2007 |
None
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | LIST OF SECTIONS |
| 6 | INDEX TO NEW AND REVISED CASES |
| 7 | NOTES TO NUMERIC INDEX |
| 8 | SUMMARY OF CHANGES |
| 10 | NUMERIC INDEX |
| 16 | SUBJECT INDEX |
| 24 | APPLICABILITY INDEX FOR SECTION XI CASES |
| 40 | CASES OF ASME BOILER AND PRESSURE VESSEL CODE Case N-4-12 Special Type 403 Modified Forgings or Bars, Class 1 and CS Section III, Division 1 |
| 44 | Case N-60-5 Material for Core Support Structures Section III, Division 1 |
| 50 | Case N-62-7 Internal and External Valve Items, Classes 1, 2, and 3 Section III, Division 1 |
| 72 | Case N-71-18 Additional Materials for Subsection NF, Class 1, 2, 3, and MC Supports Fabricated by Welding Section III, Division I |
| 104 | Case N-122-2 Procedure for Evaluation of the Design of Rectangular Cross Section Attachments on Class 1 Piping Section III, Division 1 |
| 108 | Case N-131-1 Material for Internal Pressure Retaining Items for Pressure Relief Valves, Classes 1, 2, and 3 Section III, Division 1 |
| 110 | Case N-133-3 Use of SB-148 Alloys 952 and 954, Class 3 Section III, Division 1 |
| 112 | Case N-154-1 Projection Resistance Welding of Valve Seats, Classes 1, 2, and 3 Section III, Division 1 |
| 114 | Case N-155-2 Fiberglass Reinforced Thermosetting Resin Pipe Section III, Division 1 |
| 168 | Case N-160-1 Finned Tubing for Construction Section III, Division 1 |
| 170 | Case N-192-3 Use of Braided Flexible Connectors, Classes 2 and 3 Section III, Division 1 |
| 172 | Case N-201-5 Class CS Components in Elevated Temperature Service Section III, Division 1 |
| 326 | Case N-205 Use of Ductile Iron SA-395, Class 3 Section III, Division 1 |
| 328 | Case N-208-1 Fatigue Analysis for Precipitation Hardening Nickel Alloy Bolting Material to Specification SB-637 N07718 for Class 1 Construction Section III, Division 1 |
| 330 | Case N-213 Welded Radial Shear Bar Assemblies Section III, Division 2 |
| 334 | Case N-243 Boundaries Within Castings Used for Core Support Structures Section III, Division 1, Class CS |
| 336 | Case N-249-14 Additional Materials for Subsection NF, Class 1, 2, 3, and MC Supports Fabricated Without Welding Section III, Division 1 |
| 368 | Case N-253-14 Construction of Class 2 or Class 3 Components for Elevated Temperature Service Section III, Division 1 |
| 402 | Case N-254 Fabrication and Installation of Elevated Temperature Components, Class 2 and 3 Section III, Division 1 |
| 404 | Case N-257 Protection Against Overpressure of Elevated Tempera-ture Components, Classes 2 and 3 Section III, Division 1 |
| 408 | Case N-258-2 Design of Interaction Zones for Concrete Containments Section III, Division 2 |
| 410 | Case N-284-2 Metal Containment Shell Buckling Design Methods, Class MC Section III, Division 1 |
| 434 | Case N-290-1 Expansion Joints in Class 1, Liquid Metal Piping Section III, Division 1 |
| 464 | Case N-307-3 Ultrasonic Examination of Class 1 Bolting, Table IWB-2500-1, Examination Category B-G-1 Section XI, Division 1 |
| 466 | Case N-312 Use of Stud Welds to Anchor Section III, Division 1, Class MC Vessels to Section III, Division 2, Class CC Concrete Containment Structures Section III, Division 2 |
| 468 | Case N-315 Repair of Bellows Section III, Division 1 |
| 470 | Case N-318-5 Procedure for Evaluation of the Design of Rectangular Cross Section Attachments on Class 2 or 3 Piping Section III, Division 1 |
| 474 | Case N-319-3 Alternate Procedure for Evaluation of Stresses in Butt Welding Elbows in Class 1 Piping Section III, Division 1 |
| 476 | Case N-323-1 Alternative Examination for Welded Attachments to Pressure Vessels Section XI, Division 1 |
| 480 | Case N-329 Examination of Bar Material Section III, Division 1, Class 1 |
| 482 | Case N-351 Use of Subsize Charpy V-Notch Specimens Section III, Division 1 |
| 484 | Case N-369 Resistance Welding of Bellows Section III, Division 1 |
| 486 | Case N-373-3 Alternative PWHT Time at Temperature for P-No. 5A or P-No. 5B Group 1 Material, Classes 1, 2, and 3 Section III, Division 1 |
| 488 | Case N-391-2 Procedure for Evaluation of the Design of Hollow Circular Cross Section Welded Attachments on Class 1 Piping Section III, Division 1 |
| 492 | Case N-392-3 Procedure for Evaluation of the Design of Hollow Circular Cross Section Welded Attachments on Classes 2 and 3 Piping Section III, Division 1 |
| 496 | Case N-405-1 Socket Welds Section III, Division 1 |
| 498 | Case N-416-4 Alternative Pressure Test Requirement for Welded or Brazed Repairs, Fabrication Welds or Brazed Joints for Replacement Parts and Piping Subassemblies, or Installation of Replacement Items by Welding or Braz-ing, Classes 1, 2, and 3 Section XI, Division 1 |
| 500 | Case N-432-1 Repair Welding Using Automatic or Machine Gas Tungsten-Arc Welding (GTAW) Temper Bead Tech-nique Section XI, Division 1 |
| 504 | Case N-452 Specialized Subcontracted Welding Process (Electron Beam Welding) Section III, Division 1 |
| 506 | Case N-453-3 Nickel-Chromium-Molybdenum-Copper Stainless Steel (UNS N08925 and N08926) for Class 2 and 3 Construction Section III, Division 1 |
| 508 | Case N-454-1 Nickel-Chromium-Molybdenum-Copper Stainless Steels (UNS N08925 and N08926) Wrought Fittings for Class 2 and 3 Construction Section III, Division 1 |
| 510 | Case N-455-1 Nickel-Chromium-Molybdenum-Copper Stainless Steels (UNS N08925 and N08926) Forged Flanges and Fittings for Class 2 and 3 Construction Section III, Division 1 |
| 512 | Case N-460 Alternative Examination Coverage for Class 1 and Class 2 Welds Section XI, Division 1 |
| 514 | Case N-467 Testing of Elevated Temperature Components, Classes 2 and 3 Section III, Division 1 |
| 516 | Case N-469-1 Martensitic Stainless Steel for Classes 1, 2, and 3 Components Section III, Division 1 |
| 518 | Case N-483-3 Alternative Rules to the Provisions of NCA-3800, Requirements for Purchase of Material Section III, Divisions 1 and 3 |
| 522 | Case N-491-2 Alternative Rules for Examination of Class 1, 2, 3, and MC Component Supports of Light-Water Cooled Power Plants Section XI, Division 1 |
| 530 | Case N-493 Alternative Radiographic Acceptance Criteria for Vessels Used as Shipping Casks, Class 1 Section III, Division 1 |
| 532 | Case N-494-4 Pipe Specific Evaluation Procedures and Acceptance Criteria for Flaws in Piping that Exceed the Acceptance Standards Section XI, Division 1 |
| 546 | Case N-496-2 Helical-Coil Threaded Inserts Section XI, Division 1 |
| 548 | Case N-498-4 Alternative Requirements for 10-Year System Hydrostatic Testing for Class 1, 2, and 3 Systems Section XI, Division 1 |
| 550 | Case N-499-2 Use of SA-533 Grade B, Class 1 Plate and SA-508 Class 3 Forgings and their Weldments for Limited Elevated Temperature Service Section III, Division 1 |
| 568 | Case N-500-2 Alternative Rules for Standard Supports for Classes 1, 2, 3 and MC Section III, Division 1 |
| 570 | Case N-504-4 Alternative Rules for Repair of Classes 1, 2, and 3 Austenitic Stainless Steel Piping Section XI, Division 1 |
| 574 | Case N-505 Alternative Rules for the Examination of Butt Welds Used as Closure Welds for Electrical Penetration Assemblies in Containment Structures Section III, Division 1 |
| 576 | Case N-508-3 Rotation of Serviced Snubbers and Pressure Relief Valves for the Purpose of Testing Section XI, Division 1 |
| 578 | Case N-510-1 Borated Stainless Steel for Class CS Core Support Structures and Class 1 Component Supports Section III, Division 1 |
| 582 | Case N-511 Design Temperatures for Atmospheric and 0–15 psi Storage Tanks Section III, Division 1 |
| 584 | Case N-513-2 Evaluation Criteria for Temporary Acceptance of Flaws in Moderate Energy Class 2 or 3 Piping Section XI, Division 1 |
| 594 | Case N-516-3 Underwater Welding Section XI, Division 1 |
| 598 | Case N-517-1 Quality Assurance Program Requirements for Owners Section XI, Division 1 |
| 600 | Case N-520-1 Alternative Rules for Renewal of N-type Certificates for Plants Not in Active Construction Section III, Division 1 |
| 602 | Case N-525 Design Stress Intensities and Yield Strength Values for UNS N06690 With a Minimum Specified Yield Strength of 30 ksi, Class 1 Components Section III, Division 1 |
| 604 | Case N-526 Alternative Requirements for Successive Inspections of Class 1 and 2 Vessels Section XI, Division 1 |
| 606 | Case N-528-1 Purchase, Exchange, or Transfer of Material Between Nuclear Plant Sites Section XI, Division 1 |
| 608 | Case N-530 Provisions for Establishing Allowable Axial Compressive Membrane Stresses in the Cylindrical Walls of 0-15 psi Storage Tanks, Classes 2 and 3 Section III, Division 1 |
| 620 | Case N-532-4 Repair/Replacement Activity Documentation Requirements and Inservice Summary Report Preparation and Submission Section XI, Division 1 |
| 626 | Case N-533-1 Alternative Requirements for VT-2 Visual Examination of Class 1, 2, and 3 Insulated Pressure-Retaining Bolted Connections Section XI, Division 1 |
| 628 | Case N-534 Alternative Requirements for Pneumatic Pressure Testing Section XI, Division 1 |
| 630 | Case N-537 Location of Ultrasonic Depth-Sizing Flaws Section XI, Division 1 |
| 632 | Case N-539 UNS N08367 in Class 2 and 3 Valves Section III, Division 1 |
| 634 | Case N-548 Air Cooling of SA-182 Grades F304, F304L, F316, F316L Forgings Instead of Liquid Quenching After Solution Heat Treatment, Classes 1, 2, and 3 Section III, Division 1 |
| 636 | Case N-552 Alternative Methods — Qualification for Nozzle Inside Radius Section from the Outside Surface Section XI, Division 1 |
| 640 | Case N-553-1 Eddy Current Surface Examination Section XI, Division 1 |
| 642 | Case N-554-3 Alternative Requirements for Reconciliation of Replacement Items and Addition of New Systems Section XI, Division 1 |
| 646 | Case N-557-1 In-Place Dry Annealing of a PWR Nuclear Reactor Vessel Section XI, Division 1 |
| 648 | Case N-558 Stamping of Class 2 Vessels Fabricated to Subsection NB Section III, Division 1 |
| 650 | Case N-560-2 Alternative Examination Requirements for Class 1, Category B-J Piping Welds Section XI, Division 1 |
| 664 | Case N-561-1 Alternative Requirements for Wall Thickness Restoration of Class 2 and High Energy Class 3 Carbon Steel Piping Section XI, Division 1 |
| 670 | Case N-562-1 Alternative Requirements for Wall Thickness Restoration of Class 3 Moderate Energy Carbon Steel Piping Section XI, Division 1 |
| 674 | Case N-564-2 UNS J93380, Alloy CD3MWCuN, Classes 2 and 3 Construction Section III, Division 1 |
| 678 | Case N-565 Alternative Methods of Nozzle Attachment for Class 1 Vessels Section III, Division 1 |
| 680 | Case N-566-2 Corrective Action for Leakage Identified at Bolted Connections Section XI, Division 1 |
| 682 | Case N-567-1 Reconciliation Requirements for Class 1, 2, and 3 Replacement Components Section XI, Division 1 |
| 684 | Case N-569-1 Alternative Rules for Repair by Electrochemical Deposition of Classes 1 and 2 Steam Generator Tubing Section XI, Division 1 |
| 688 | Case N-570-1 Alternative Rules for Linear Piping and Linear Standard Supports for Classes 1, 2, 3, and MC Section III, Division 1 |
| 690 | Case N-572 Use of SB-425 (UNS N08825) Bar and Rod for Class 1 Construction Section III, Division 1 |
| 692 | Case N-573 Transfer of Procedure Qualification Records Between Owners Section XI, Division 1 |
| 694 | Case N-575 Alternative Examination Requirements for Full Penetration Nozzle-to-Vessel Welds in Reactor Vessels with Set-On Type Nozzles Section XI, Division 1 |
| 698 | Case N-576-1 Repair of Classes 1 and 2 SB-163, UNS N06600 Steam Generator Tubing Section XI, Division 1 |
| 702 | Case N-577-1 Risk-Informed Requirements for Class 1, 2, or 3 Piping, Method A Section XI, Division 1 |
| 716 | Case N-578-1 Risk-Informed Requirements for Class 1, 2, or 3 Piping, Method B Section XI, Division 1 |
| 734 | Case N-579 Use of Nonstandard Nuts, Class 1, 2, and 3, MC, CS Components and Supports Construction Section III, Division 1 |
| 736 | Case N-580-1 Use of Alloy 600 With Columbium Added Section III, Division 1 |
| 740 | Case N-583 Annual Training Alternative Section XI, Division 1 |
| 742 | Case N-586-1 Alternative Additional Examination Requirements for Classes 1, 2, and 3 Piping, Components, and Supports Section XI, Division 1 |
| 744 | Case N-589-1 Class 3 Nonmetallic Cured-In-Place Piping Section XI, Division 1 |
| 756 | Case N-593-1 Examination Requirements for Steam Generator Nozzle-to-Vessel Welds Section XI, Division 1 |
| 758 | Case N-594 Repairs to P-4 and P-5A Materials for Pumps and Valves Without Postweld Heat Treatment Section III, Division 1 |
| 760 | Case N-595-4 Requirements for Spent Fuel Storage Canisters Section III, Division 1 |
| 762 | Case N-597-2 Requirements for Analytical Evaluation of Pipe Wall Thinning Section XI, Division 1 |
| 774 | Case N-600 Transfer of Welder, Welding Operator, Brazer, and Brazing Operator Qualifications Between Owners Section XI, Division 1 |
| 776 | Case N-606-1 Similar and Dissimilar Metal Welding Using Ambient Temperature Machine GTAW Temper Bead Technique for BWR CRD Housing/Stub Tube Repairs Section XI, Division 1 |
| 782 | Case N-607 Guidance on Implementation of NS Certificate of Accreditation Section III, Division 1 |
| 784 | Case N-609 Alternative Requirements to Stress-Based Selection Criteria for Category B-J Welds Section XI, Division 1 |
| 786 | Case N-610 Alternative Reference Stress Intensity Factor (KIR) ) Curve for Class Components Section III, Division 1 |
| 788 | Case N-611 Use of Stress Limits as an Alternate to Pressure Limits Subsection NC/ND-3500 Section III, Division 1 |
| 790 | Case N-613-1 Ultrasonic Examination of Full Penetration Nozzles in Vessels, Examination Category B-D, Item No’s. B3.10 and B3.90, Reactor Nozzle-To-Vessel Welds, Figs. IWB- 2500-7(a), (b), and (c) Section XI, Division 1 |
| 794 | Case N-615 Ultrasonic Examination as a Surface Examination Method for Category B-F and B-J Piping Welds Section XI, Division 1 |
| 796 | Case N-616 Alternative Requirements for VT-2 Visual Examination of Classes 1, 2, and 3 Insulated Pressure Retaining Bolted Connections Section XI, Division 1 |
| 798 | Case N-618 Use of a Reactor Pressure Vessel as a Transportation Containment System Section XI, Division 1 |
| 802 | Case N-619 Alternative Requirements for Nozzle Inner Radius Inspections for Class 1 Pressurizer and Steam Genera-tor Nozzles Section XI, Division 1 |
| 804 | Case N-620 Rules for Class 1 Type M Pumps Section III, Division 1 |
| 808 | Case N-621-1 Ni-Cr-Mo Alloy (UNS N06022) Welded Construction to 800°F Section III, Division 1 |
| 810 | Case N-624 Successive Inspections Section XI, Division 1 |
| 812 | Case N-625-1 Ni-Cr-Mo Alloy (UNS N06059) Welded Construction to 800°F Section III, Division 1 |
| 814 | Case N-626 Use of Plastic Analysis for the Design of Type B Con-tainment Components for Nuclear Material Transpor-tation Casks Section III, Division 3 |
| 816 | Case N-629 Use of Fracture Toughness Test Data to Establish Reference Temperature for Pressure Retaining Materials Section XI, Division 1 |
| 818 | Case N-631 Use of Fracture Toughness Test Data to Establish Reference Temperature for Pressure Retaining Materials Other Than Bolting for Class 1 Vessels Section III, Division 1 |
| 820 | Case N-632 Use of ASTM A 572, Grades 50 and 65 for Structural Attachments to Class CC Containment Liners Section III, Division 2 |
| 822 | Case N-633 Use of SA-533/SA-533M, Type B, Class 2, Plate for Structural Attachments to Class CC Containment Liners Section III, Division 2 |
| 824 | Case N-634 Alternatives to the Provisions of CC-2511 for Structural Attachments to Class CC Containment Liners Section III, Division 2 |
| 826 | Case N-635-1 Use of 22Cr-5Ni-3Mo-N (Alloy UNS S31803) Forgings, Plate, Bar, Welded and Seamless Pipe, and/or Tube, Fittings, and Fusion Welded Pipe With Addition of Filler Metal, Classes 1, 2, and 3 Section III, Division 1 |
| 828 | Case N-636 Use of 18Cr-13Ni-3Mo (Alloy UNS S31703), 19Cr-15Ni- 4Mo (Alloy UNS S31725), and 18.5Cr-15.5Ni-4.5Mo-N (Alloy UNS S31726) Forgings, Seamless Tubing, Plate, Welded Tubing, Welded and Seamless Pipe, Welded Pipe With Addition of Filler Metal and Fittings, Classes 2 and 3 Section III, Division 1 |
| 830 | Case N-637 Use of 44Fe-25Ni-21Cr-Mo (Alloy UNS N08904) Plate, Bar, Fittings, Welded Pipe, and Welded Tube, Classes 2 and 3 Section III, Division 1 |
| 832 | Case N-638-4 Similar and Dissimilar Metal Welding Using Ambient Temperature Machine GTAW Temper Bead Technique Section XI, Division 1 |
| 838 | Case N-639 Alternative Calibration Block Material Section XI, Division 1 |
| 840 | Case N-641 Alternative Pressure-Temperature Relationship and Low Temperature Overpressure Protection System Requirements Section XI, Division 1 |
| 842 | Case N-642 Alternative Rules for Progressive Liquid Penetrant Examination of Groove Welds in P-No. 8 Materials 3/16 in. (5 mm) Thick and Less Made by Autogenous Machine or Automatic Welding Section III, Division 1 |
| 844 | Case N-643-2 Fatigue Crack Growth Rate Curves for Ferritic Steels in PWR Water Environment Section XI, Division 1 |
| 850 | Case N-644-1 Weld Procedure Qualification for Procedures Exempt From PWHT in Classes 1, 2, and 3 Construction Section III, Division 1 |
| 852 | Case N-645-1 Use of Rupture Disk Devices on Nuclear Fuel Storage Cannisters, Class 1 Section III, Division 1 |
| 854 | Case N-646 Alternative Stress Intensification Factors for Circumferential Fillet Welded or Socket Welded Joints for Class 2 or 3 Piping Section III, Division 1 |
| 856 | Case N-647 Alternative to Augmented Examination Requirements of IWE-2500 Section XI, Division 1 |
| 858 | Case N-648-1 Alternative Requirements for Inner Radius Examinations of Class 1 Reactor Vessel Nozzles Section XI, Division 1 |
| 860 | Case N-649 Alternative Requirements for IWE-5240 Visual Examination Section XI, Division 1 |
| 862 | Case N-650 Use of SA-537, Class 2 Plate Material in Non-pressure Boundary Application Service 700°F to 850°F, Class 1 or CS Section III, Division 1 |
| 864 | Case N-651 Ferritic and Dissimilar Metal Welding Using SMAW Temper Bead Technique Without Removing the Weld Bead Crown for the First Layer Section XI, Division 1 |
| 870 | Case N-652-1 Alternative Requirements to Categories B-G-1, B-G-2, and C-D Bolting Examination Methods and Selection Criteria Section XI, Division 1 |
| 876 | Case N-653 Qualification Requirements for Full Structural Overlaid Wrought Austenitic Piping Welds Section XI, Division 1 |
| 880 | Case N-654 Acceptance Criteria for Flaws in Ferritic Steel Components 4 in. and Greater in Thickness Section XI, Division 1 |
| 882 | Case N-655 Use of SA-738, Grade B, for Metal Containment Vessels, Class MC Section III, Division 1 |
| 884 | Case N-656 Rules for the Construction of Inner Transportation Containments Section III, Division 3 |
| 886 | Case N-657 Use of the N-1A Data Report Form for Spent Fuel Canisters Section III, Division 1 |
| 888 | Case N-658 Qualification Requirements for Ultrasonic Examination of Wrought Austenitic Piping Welds Section XI, Division 1 |
| 890 | Case N-659-1 Use of Ultrasonic Examination in Lieu of Radiography for Weld Examination Section III, Division 1 |
| 892 | Case N-660 Risk-Informed Safety Classification for Use in Risk-Informed Repair/Replacement Activities Section XI, Division 1 |
| 900 | Case N-661-1 Alternative Requirements for Wall Thickness Restoration of Class 2 and 3 Carbon Steel Piping for Raw Water Service Section XI, Division 1 |
| 904 | Case N-662 Alternative Repair/Replacement Requirements for Items Classified in Accordance With Risk-Informed Processes Section XI, Division 1 |
| 908 | Case N-663 Alternative Requirements for Classes 1 and 2 Surface Examinations Section XI, Division 1 |
| 910 | Case N-664 Performance Demonstration Requirements for Examination of Unclad Reactor Pressure Vessel Welds, Excluding Flange Welds Section XI, Division 1 |
| 912 | Case N-665 Alternative Requirements for Beam Angle Measurements Using Refracted Longitudinal Wave Search Units Section XI, Division 1 |
| 914 | Case N-666 Weld Overlay of Class 1, 2, and 3 Socket Welded Connections Section XI, Division 1 |
| 920 | Case N-670 Use of Ductile Cast Iron Conforming to ASTM A 874/A 874M-98 or JIS G5504-1992 for Transport Containments Section III, Division 3 |
| 924 | Case N-673 Boron Containing Powder Metallurgy Aluminum Alloy for Storage and Transportation of Spent Nuclear Fuel Section III, Division 1 |
| 926 | Case N-683 Method for Determining Maximum Allowable False Calls When Performing Single-Sided Access Performance Demonstration in Accordance With, Appendix VIII, Supplements 4 and 6 Section XI, Division 1 |
| 928 | Case N-685 Lighting Requirements for Surface Examination Section XI, Division 1 |
| 930 | Case N-686-1 Alternative Requirements for Visual Examinations, VT-1, VT-2, and VT-3 Section XI, Division 1 |
| 932 | Case N-691 Application of Risk-Informed Insights to Increase the Inspection Interval for Pressurized Water Reactor Vessels Section XI, Division 1 |
| 938 | Case N-692 Use of Standard Welding Procedures Section III, Divisions 1 and 3 |
| 940 | Case N-693 Alternative Method to the Requirements of NB-3228.6 for Analyzing Piping Subjected to Reversing Dynamic Loads Section III, Division 1 |
| 942 | Case N-694-1 Evaluation Procedure and Acceptance Criteria for PWR Reactor Vessel Head Penetration Nozzles Section XI, Division 1 |
| 948 | Case N-695 Qualification Requirements for Dissimilar Metal Piping Welds Section XI, Division 1 |
| 952 | Case N-696 Qualification Requirements for Appendix VIII Piping Examinations Conducted From the Inside Surface Section XI, Division 1 |
| 954 | Case N-697 Pressurized Water Reactor (PWR) Examination and Alternative Examination Requirements for Pressure Retaining Welds in Control Rod Drive and Instrument Nozzle Housings Section XI, Division 1 |
| 956 | Case N-698 Design Stress Intensities and Yield Strength Values for UNS N06690 With a Minimum Specified Yield Strength of 35 ksi (240 MPa), Class 1 Components Section III, Division 1 |
| 958 | Case N-699 Use of Titanium Grade 2 (UNS R50400) Tube and Bar, and Grade 1 (UNS R50250) Plate and Sheet for Class 1 Construction Section III, Division 1 |
| 960 | Case N-700 Alternative Rules for Selection of Classes 1, 2, and 3 Vessel Welded Attachments for Examination Section XI, Division 1 |
| 962 | Case N-702 Alternative Requirements for Boiling Water Reactor (BWR) Nozzle Inner Radius and Nozzle-to-Shell Welds Section XI, Division 1 |
| 964 | Case N-703 Use of Strain Hardened Austenitic Material at Lower Design Stress Values for Class 1 Valves Section III, Division 1 |
| 966 | Case N-705 Evaluation Criteria for Temporary Acceptance of Degradation in Moderate Energy Class 2 or 3 Vessels and Tanks Section XI, Division 1 |
| 976 | Case N-706-1 Alternative Examination Requirements of Table IWB-2500-1 and Table IWC-2500-1 for PWR Stainless Steel Residual and Regenerative Heat Exchangers Section XI, Division 1 |
| 978 | Case N-707 Use of SA-537, Class 1 Plate Material for Spent-Fuel Containment Internals in Non-pressure Retaining Applications Above 700°F (370°C) Section III, Division 3 |
| 980 | Case N-710 Use of Zirconium Alloy UNS R60702, Bars, Forgings, Plate, Seamless and Welded Fittings, Seamless and Welded Tubing, and Seamless and Welded Pipe, for Class 3 Construction Section III, Division 1 |
| 982 | Case N-711 Alternative Examination Coverage Requirements for Examination Category B-F, B-J, C-F-1, C-F-2, and R-A Piping Welds Section XI, Division 1 |
| 996 | Case N-712 Class 1 Socket Weld Examinations Section XI, Division 1 |
| 998 | Case N-716 Alternative Piping Classification and Examination Requirements Section XI, Division 1 |
| 1006 | Case N-717 Requirements for Construction of Storage Containments for Spent Nuclear Fuel and High Level Radioactive Waste and Material Section III, Division 3 |
| 1100 | Case N-722 Additional Examinations for PWR Pressure Retaining Welds in Class 1 Components Fabricated With Alloy 600/82/182 Materials Section XI, Division 1 |
| 1104 | Case N-725 Design Stress Values for UNS N06690 With a Minimum Specified Yield Strength of 35 ksi (240 MPa), Classes 2 and 3 Components Section III, Division 1 |
| 1106 | Case N-727 Dissimilar Welding Using Continuous Drive Friction Welding for Reactor Vessel CRDM/CEDM Nozzle to Flange/Adapter Welds, Class 1 Section III, Division 1 |
| 1108 | Case N-728 Use of ASTM B 932-04 Plate Material for Nonpressure Retaining Spent Fuel Containment Internals to 650°F (343°C) Section III, Division 3 |
| 1110 | Case N-729-1 Alternative Examination Requirements for PWR Reactor Vessel Upper Heads With Nozzles Having Pressure-Retaining Partial-Penetration Welds Section XI, Division 1 |
| 1124 | Case N-730 Roll Expansion of Class 1 Control Rod Drive Bottom Head Penetrations in BWRs Section XI, Division 1 |
| 1130 | Case N-731 Alternative Class 1 System Leakage Test Pressure Requirements Section XI, Division 1 |
| 1132 | Case N-732 Magnetic Particle Examination of Forgings for Construction Section III, Division 1 |
| 1134 | Case N-733 Mitigation of Flaws in NPS 2 (DN 50) and Smaller Nozzles and Nozzle Partial Penetration Welds in Vessels and Piping by Use of a Mechanical Connection Modification Section XI, Division 1 |
| 1138 | Case N-735 Successive Inspections of Class 1 and 2 Piping Welds Section XI, Division 1 |
| 1140 | Case N-736 Use of UNS S32050 Welded and Seamless Pipe and Tubing, Forgings, and Plates Conforming to SA-249/SA-249M, SA-479/SA-479M, and SA-240/ SA-240M, and Grade CK35MN Castings Conforming to ASTM A 743-03 for Construction of Class 1, 2, and 3 Components Section III, Division 1 |
| 1144 | Case N-738 NDE of Full Penetration Butt Welds in Class 2 Supports Section III, Division 1 |
| 1146 | Case N-739 Alternative Qualification Requirements for Personnel Performing Class CC Concrete and Post-tensioning System Visual Examinations Section XI, Division 1 |
| 1148 | Case N-740 Dissimilar Metal Weld Overlay for Repair of Class 1, 2, and 3 Items Section XI, Division 1 |
| 1156 | Case N-741 Use of 22Cr-5Ni-3Mo-N (Alloy UNS S32205 Austenitic/Ferritic Duplex Stainless Steel) Forgings, Plate, Welded and Seamless Pipe and Tubing, and Fit-tings to SA-182, SA-240, SA-789, A 790-04a, SA-815, Classes 2 and 3 Section III, Division 1 |
| 1158 | Case N-744 Use of Metric Units Boiler and Pressure Vessel Code Section III, Divisions 1 and 3, and Sections V and IX |
| 1160 | Case N-746 Use of 46Fe-24Ni-21Cr-6Mo-Cu-N (UNS N08367) Bolting Materials for Class 2 and 3 Components Section III, Division 1 |
| 1162 | Case N-747 Reactor Vessel Head-to-Flange Weld Examinations Section XI, Division 1 |
| 1164 | Case N-751 Pressure Testing of Containment Penetration Piping Section XI, Division 1 |
| 1166 | Case N-753 Vision Tests Section XI, Division 1 |
| 1168 | Case N-756 Alternative Rules for Acceptability for Class 1 Valves, NPS 1 (DN 25) and Smaller With Nonwelded End Con-nections Other Than Flanges Section III, Division 1 |
| 1170 | Case N-759 Alternative Rules for Determining Allowable External Pressure and Compressive Stresses for Cylinders, Cones, Spheres, and Formed Heads Section III, Division 1 |
Related products
-
ASME BPVC CC NC Edtn 2004
ASME BPVC CODE CASES: Nuclear Components-2004 Published By Publication Date Number of Pages ASME 2004…
