Name: ASME BPVC III 1 NB 2017 PDF - PDF Standards Store
Price: 377.00 USD
Availability: InStock

None

PDF Catalog

PDF Pages	PDF Title
49	NB-1132.2-1 Attachments in the Component Support Load Path That Do Not Perform a Pressure‑Retaining Function
50	NB-1132.2-2 Attachments That Do Not Perform a Pressure‑Retaining Function and Are Not in the Component Support Load Path (Nonstructural Attachments)
51	NB-1132.2-3 Attachments That Perform a Pressure‑Retaining Function
52	NB-1132.2-4 Attachments Within the Reactor Pressure Vessel (Core Support Structures) That Do Not Perform a Pressure‑Retaining Function
60	NB-2332(a)-1 Required Cv Values for Piping, Pumps, and Valves
61	NB-2333-1 Required Cv Values for Bolting Material
64	NB-2432.1-1 Sampling of Welding Materials for Chemical Analysis NB-2432.2(a)-1 Chemical Analysis for Reactor Vessel Welding Material
65	NB-2432.2(a)-2 Chemical Analysis for Welding Material for Other Than Reactor Vessel Welds
66	NB-2433.1-1 Weld Metal Delta Ferrite Content
71	NB-2552-1 Axial Propagation of Sound in Tube Wall
74	NB-2571-1 Required Examinations
77	NB-2575.2-1 Typical Pressure‑Retaining Parts of Pumps and Valves
89	NB-3332.2-1 Chart for Determining Value of F
91	NB-3338.2(a)-1 Direction of Stress Components
92	NB-3338.2(a)-2 Nozzle Dimensions
93	NB-3338.2(c)-1 Stress Indices for Nozzles
94	NB-3339.1(b)-1 Examples of Acceptable Transition Details NB-3339.3-1 Required Minimum Reinforcing Area, Ar
95	NB-3339.4-1 Limits of Reinforcing Zone NB-3339.7(c)-1 Stress Indices for Internal Pressure Loading
96	NB-3351-1 Welded Joint Locations Typical of Categories A, B, C, and D
97	NB-3352-1 Typical Butt Joints
99	NB-3361-1 Category A and B Joints Between Sections of Unequal Thickness
100	NB-3423-1 Typical Single Volute Casing NB-3423-2 Typical Double Volute Casing
101	NB-3433.4-1 Minimum Tangential Inlet and Outlet Wall Thickness
102	NB-3441.1-1 Type A Pump NB-3441.1-2 Type A Pump NB-3441.2-1 Type B Pump
103	NB-3441.3-1 Type C Pump NB-3441.3-2 Type C Pump
104	NB-3441.4(a)-1 Type D Pump NB-3441.5-1 Type E Pump NB-3441.6(a)-1 Type F Pump
110	NB-3544.1(a)-1 Fillets and Corners NB-3544.1(c)-1 Ring Grooves
111	NB-3544.3-1 Lugs and Protuberances
112	NB-3544.7-1 Flat Wall Limitation
113	NB-3545.1(a)-1 Pressure Area Method
116	NB-3545.2(a)-1 Critical Sections of Valve Bodies
118	NB-3545.2(c)-1 Model for Determining Secondary Stress in Valve Crotch Region
119	NB-3545.2(c)-3 Thermal Stress Index Versus Thickness Continuity Run or Branch
120	NB-3545.2(c)-4 Secondary Stress Index Versus Thickness Discontinuity Run or Branch
121	NB-3545.2(c)-5 C4 Versus Te1/te NB-3545.2(c)-6 Stress Index for Thermal Fatigue
125	NB-3591.1-1 Typical Pressure Relief Devices
126	NB-3591.1-2 Typical Pressure Relief and Safety Relief Devices
127	NB-3594.3-1 Valve Nozzle
130	NB-3622-1 Examples of Reversing and Nonreversing Dynamic Loads
133	NB-3641.1(a)-1 Values of A
135	NB-3643.3(a)-1 Branch Connection Nomenclature
136	NB-3643.3(a)-2 Typical Reinforcement of Openings
137	NB-3643.3(a)-3 Typical Reinforced Extruded Outlet
139	NB-3644(b)-1 Miter Joint Geometry
140	NB-3647.2-1 Types of Permanent Blanks
143	NB-3653.2(b)-1 Decomposition of Temperature Distribution Range
150	NB-3681(a)-1 Stress Indices for Use With Equations in NB-3650
152	NB-3683.1(c)-1
153	NB-3683.1(d)-1
156	NB-3683.6-1
158	NB-3684-1 Direction of Stress Components
159	NB-3685.1-1 Curved Pipe or Welding End Elbows, Internal Pressure
160	NB-3685.1-2 Curved Pipe or Welding End Elbows, Moment Loading (λ≥0.2)
161	NB-3685.2-1 Elbow Nomenclature NB-3686.1-1
162	NB-3686.2-1 NB-3686.5-1 Branch Connections in Straight Pipe
163	NB-3686.6-1 Reducers
167	NB-4221.1-1 Maximum Difference in Cross‑Sectional Diameters
168	NB-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
169	NB-4221.2(a)-2 Maximum Arc Length for Determining Plus or Minus Deviation NB-4232-1 Maximum Allowable Offset in Final Welded Joints
171	NB-4233(a)-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Components Are Welded From One Side and Fairing Is Not Performed
172	NB-4243-1 Acceptable Full Penetration Weld Details for Category C Joints (NB-3352.3)
173	NB-4244(a)-1 Nozzles Joined by Full Penetration Butt Welds
174	NB-4244(b)-1 Nozzles Joined by Full Penetration Corner Welds
175	NB-4244(c)-1 Deposited Weld Metal Used as Reinforcement of Openings for Nozzles
176	NB-4244(d)-1 Partial Penetration Nozzles
177	NB-4244(d)-2 Partial Penetration Nozzle for Coaxial Cylinders
178	NB-4244(e)-1 Oblique Connections
179	NB-4246(a)-1 Typical Piping Branch Connections Joined by Full Penetration Welds
180	NB-4246(b)-1 Typical Piping Branch Connections Joined by a Fillet Weld or a Partial Penetration Weld
181	NB-4250-1 Welding End Transitions — Maximum Envelope
182	NB-4250-2 Component to Pipe Weld NB-4250-3 Pipe to Pipe Weld
190	NB-4427-1 Fillet and Socket Weld Details and Dimensions
191	NB-4433-1 Types of Attachment Welds
193	NB-4440-1 Appurtenance Weld Joint Details, NPS 2 (DN 50) and Smaller
194	NB-4511-1 Brazed Connections for Appurtenances and Piping, NPS 1 (DN 25) and Smaller
195	NB-4524-1 Maximum Design Temperatures for Brazing Filler Metal
197	NB-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds
198	NB-4622.4(c)-1 Alternative Holding Temperatures and Times
199	NB-4622.7(b)-1 Exemptions to Mandatory PWHT
202	NB-4622.9(d)(1)-1 Dissimilar Metal Repair Cavity Measurement
205	NB-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters

Published By	Publication Date	Number of Pages
ASME	2017	235


PDF Format	Searchable	Printable	Preview Now

Standard Title	ASME BPVC – III – 1 – NB -2017 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 1, Subsection NB, Class 1 Components
Published Code	ASME
Publication Date	2017
Pages Count	235

ASME BPVC III 1 NB 2017

PDF Catalog

Related products