🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME BPVC III 3 2010

ASME BPVC III 3 2010

$377.00

ASME BPVC – III – 3 -2010 BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste

Published By Publication Date Number of Pages
ASME 2010
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

None

PDF Catalog

PDF Pages PDF Title
5 CONTENTS
16 LIST OF SECTIONS
18 FOREWORD
20 STATEMENTS OF POLICICY
21 PERSONNEL
33 ORGANIZATION OF SECTION III
35 SUMMARY OF CHANGES
37 LIST OF CHANGES IN RECORD ORDER
39 SUBSECTION WA GENERAL REQUIREMENTS
ARTICLE WA- 1000 SCOPE OF DIVISION 3
WA- 1100 SCOPE
WA- 1110 NATURE OF THESE RULES AND CONTAINMENTS TO WHICH THEY ARE APPLICABLE
WA- 1120 DEFINITIONS
WA- 1130 LIMITS OF THESE RULES
WA- 1140 USE OF CODE EDITIONS, ADDENDA, AND CASES
40 WA- 1150 UNITS OF MEASURE
WA- 1200 GENERAL REQUIREMENTS
WA- 1210 VALVES
WA- 1220 MATERIALS WA- 1221 Metallic Materials
WA- 1230 PARTS
41 ARTICLE WA- 2000 DESIGN BASIS FOR CONTAINMENTS
WA- 2100 GENERAL REQUIREMENTS
WA- 2110 SCOPE
WA- 2120 DESIGN BASIS WA- 2121 Consideration of Operating Conditions
42 WA- 2130 SPECIAL REQUIREMENTS
43 ARTICLE WA- 3000 RESPONSIBILITIES AND DUTIES
WA- 3100 GENERAL
WA- 3110 RESPONSIBILITIES VS. LEGAL LIABILITIES
WA- 3120 AUTHORIZATION WA- 3121 Types of Authorization
44 WA- 3130 WELDING AND SUBCONTRACTING OF WELDING WA- 3131 Welding During Construction
WA- 3300 RESPONSIBILITIES OF AN N3 CERTIFICATE HOLDER
WA- 3320 CATEGORIES OF THE N3 CERTIFICATE HOLDER’S RESPONSIBILITIES
45 WA- 3330 OBTAINING A CERTIFICATE
WA- 3340 COMPLIANCE WITH THIS DIVISION
WA- 3350 DESIGN DOCUMENTS WA- 3351 Design Specifications WA- 3351.1 Provision and Correlation.
46 WA- 3360 FABRICATION SPECIFICATION WA- 3361 Provisions of the Fabrication Specification WA- 3361.1 Responsibility.
47 WA- 3370 RESPONSIBILITY FOR QUALITY ASSURANCE WA- 3371 Scope of Responsibilities
WA- 3380 DATA REPORTS
WA- 3390 N3 CERTIFICATE HOLDER’S RESPONSIBILITY FOR RECORDS
WA- 3400 RESPONSIBILITIES OF AN NPT CERTIFICATE HOLDER
WA- 3420 CATEGORIES OF AN NPT CERTIFICATE HOLDER’S RESPONSIBILITIES
48 WA- 3430 OBTAINING A CERTIFICATE
WA- 3440 COMPLIANCE WITH THIS DIVISION
WA- 3450 RESPONSIBILITY FOR QUALITY ASSURANCE WA- 3451 Scope of Responsibilities
WA- 3460 DOCUMENTATION OF QUALITY ASSURANCE PROGRAM
WA- 3470 DATA REPORT
WA- 3800 METALLIC MATERIAL
WA- 3810 SCOPE AND APPLICABILITY
WA- 3820 MATERIAL ORGANIZATIONS
49 ARTICLE WA- 4000 QUALITY ASSURANCE
WA- 4100 REQUIREMENTS
WA- 4110 SCOPE AND APPLICABILITY
WA- 4120 DEFINITIONS
WA- 4130 ESTABLISHMENT AND IMPLEMENTATION WA- 4131 Material Organizations
50 TABLES
TABLE WA-4134.17-1 LIFETIME QUALITY ASSURANCE RECORDS
TABLE WA-4134.17-2 NONPERMANENT QUALITY ASSURANCE RECORDS
51 ARTICLE WA- 5000 AUTHORIZED INSPECTION
WA- 5100 INTRODUCTION
WA- 5110 APPLICABILITY
WA- 5120 PERFORMANCE OF INSPECTION WA- 5121 Authorized Inspection Agency
WA- 5130 ACCESS FOR INSPECTION AGENCY PERSONNEL WA- 5131 Access to the Certificate Holder’s Facilities
WA- 5200 DUTIES OF INSPECTOR
WA- 5210 GENERAL INSPECTION DUTIES
52 WA- 5220 CATEGORIES OF INSPECTOR’S DUTIES
WA- 5230 SCOPE OF WORK, DESIGN SPECIFICATIONS, DESIGN REPORTS, AND FABRICATION SPECIFICATIONS
WA- 5240 QUALITY ASSURANCE PROGRAMS WA- 5241 Stipulation of Inspections Prior to Issuance of Process Sheets or Controls
WA- 5250 QUALIFICATION RECORDS WA- 5251 Review of Qualification Records
53 WA- 5260 MATERIALS, PARTS, AND HEAT TREATMENT WA- 5261 Inspection of Materials for Compliance
WA- 5270 EXAMINATIONS AND TESTS
WA- 5280 FINAL TESTS
WA- 5290 DATA REPORTS
WA- 5300 RESPONSIBILITIES OF THE AUTHORIZED INSPECTION AGENCY
55 ARTICLE WA- 7000 REFERENCE STANDARDS
WA- 7100 GENERAL REQUIREMENTS
56 TABLES
TABLE WA-7100-1 DIMENSIONAL STANDARDS
57 TABLE WA-7100-2 STANDARDS AND SPECIFICATIONS REFERENCED IN TEXT
58 ARTICLE WA- 8000 CERTIFICATES OF AUTHORIZATION, NAMEPLATES, CODE SYMBOL STAMPING, AND DATA REPORTS
WA- 8100 AUTHORIZATION TO PERFORM CODE ACTIVITIES
WA- 8110 GENERAL
WA- 8120 SCOPE OF AUTHORIZATION
WA- 8130 INSPECTION AGREEMENT REQUIRED
WA- 8140 QUALITY ASSURANCE PROGRAM REQUIREMENTS
WA- 8150 APPLICATION FOR AUTHORIZATION
59 WA- 8160 EVALUATION FOR AUTHORIZATION WA- 8161 Evaluation for Certificate of Authorization
WA- 8170 ISSUANCE OF AUTHORIZATION
TABLE
TABLE WA-8100-1 AUTHORIZATIONS AND CODE SYMBOL STAMPS ISSUED BY THE SOCIETY FOR THE CONSTRUCTION OF TRANSPORTATION AND STORAGE CONTAINMENTS AND PARTS
60 WA- 8180 RENEWAL OF AUTHORIZATION
WA- 8200 NAMEPLATES AND STAMPING
WA- 8210 GENERAL REQUIREMENTS WA- 8211 Nameplates
WA- 8220 NAMEPLATES
WA- 8230 NAMEPLATES FOR NPT STAMPED ITEMS
WA- 8300 CODE SYMBOL STAMPS
WA- 8310 GENERAL REQUIREMENTS
FIGURE
FIG. WA-8212-1 FORM OF STAMPING
61 WA- 8330 REMOVABLE ITEMS
WA- 8400 DATA REPORTS
WA- 8410 GENERAL REQUIREMENTS
62 FORMS
FORM N-7 NUCLEAR CONTAINMENTS
64 FORM N-8 FOR CLASS SC OR TC CLOSURE WELDS
65 FORM N-9 SHOP FABRICATED CONTAINMENT PARTS
67 ARTICLE WA- 9000 GLOSSARY
WA- 9100 INTRODUCTION
WA- 9200 DEFINITIONS
69 SUBSECTION WB CLASS TC TRANSPORTATION CONTAINMENTS
ARTICLE WB- 1000 INTRODUCTION
WB- 1100 SCOPE
WB- 1120 RULES FOR CLASS TC TRANSPORTATION CONTAINMENTS
WB- 1130 BOUNDARIES OF JURISDICTION WB- 1131 Boundary of Containments
71 ARTICLE WB- 2000 MATERIAL
WB- 2100 GENERAL REQUIREMENTS FOR MATERIAL
WB- 2110 SCOPE OF PRINCIPAL TERMS EMPLOYED
WB- 2120 CONTAINMENT MATERIAL WB- 2121 Permitted Material Specifications
72 WB- 2130 CERTIFICATION OF MATERIAL
WB- 2140 WELDING MATERIAL
WB- 2150 MATERIAL IDENTIFICATION
WB- 2160 DETERIORATION OF MATERIAL IN SERVICE
WB- 2170 HEAT TREATMENT TO ENHANCE IMPACT PROPERTIES
73 WB- 2180 PROCEDURES FOR HEAT TREATMENT OF MATERIAL
WB- 2190 MATERIAL NOT PERFORMING A CONTAINMENT FUNCTION
WB- 2200 MATERIAL TEST COUPONS AND SPECIMENS FOR FERRITIC STEEL MATERIAL
WB- 2210 HEAT TREATMENT REQUIREMENTS WB- 2211 Test Coupon Heat Treatment for Ferritic Material1
WB- 2220 PROCEDURE FOR OBTAINING TEST COUPONS AND SPECIMENS FOR QUENCHED AND TEMPERED MATERIAL WB- 2221 General Requirements
75 WB- 2300 FRACTURE TOUGHNESS REQUIREMENTS FOR MATERIAL
WB- 2310 MATERIAL TO BE TOUGHNESS TESTED WB- 2311 Material for Which Toughness Testing Is Required
WB- 2320 IMPACT TEST PROCEDURES WB- 2321 Types of Tests WB- 2321.1 Drop Weight Tests.
76 WB- 2330 TEST REQUIREMENTS AND ACCEPTANCE STANDARDS3 WB- 2331 Material for Containments WB- 2331.1 Test Requirements for Ferritic Steel Material for Containments.
77 WB- 2340 NUMBER OF TOUGHNESS TESTS REQUIRED WB- 2341 Plates
TABLES
TABLE WB-2331.2-1 REQUIRED LST-RTNDTVALUES FOR FERRITIC STEEL MATERIAL FOR CONTAINMENT MATERIAL
TABLE WB-2331.2-2 REQUIRED FRACTURE TOUGHNESS VALUES FOR FERRITIC STEEL MATERIAL FOR CONTAINMENTS HAVING A SPECIFIED YIELD STRENGTH OF 50 ksi (350 000 kPa) OR LESS AT 100°F (38°C)
TABLE WB-2332(a)-1 REQUIRED Cv VALUES FOR PIPING
TABLE WB-2333-1 REQUIRED Cv VALUES FOR BOLTING MATERIAL
78 WB- 2350 RETESTS
WB- 2360 CALIBRATION OF INSTRUMENTS AND EQUIPMENT
WB- 2400 WELDING AND BRAZING MATERIAL
WB- 2410 GENERAL REQUIREMENTS
79 WB- 2420 REQUIRED TESTS
80 WB- 2430 WELD METAL TESTS WB- 2431 Mechanical Properties Test
81 TABLE WB-2432.1-1 SAMPLING OF WELDING MATERIALS FOR CHEMICAL ANALYSIS
82 WB- 2440 STORAGE AND HANDLING OF WELDING MATERIAL
WB- 2500 EXAMINATION AND REPAIR OF CONTAINMENT MATERIAL
WB- 2510 EXAMINATION OF CONTAINMENT MATERIAL
WB- 2520 EXAMINATION AFTER QUENCHING AND TEMPERING
TABLE WB-2432.2-1 CHEMICAL ANALYSIS FOR WELDING MATERIAL
83 FIGURES
FIG. WB-2433.1-1 WELD METAL DELTA FERRITE CONTENT
84 WB- 2530 EXAMINATION AND REPAIR OF PLATE WB- 2531 Required Examination
85 WB- 2540 EXAMINATION AND REPAIR OF FORGINGS AND BARS WB- 2541 Required Examinations
87 WB- 2550 EXAMINATION AND REPAIR OF SEAMLESS AND WELDED TUBULAR PRODUCTS AND FITTINGS WB- 2551 Required Examination
88 FIG. WB-2552.1-1 AXIAL PROPAGATION OF SOUND IN TUBE WALL
90 WB- 2570 EXAMINATION AND REPAIR OF STATICALLY AND CENTRIFUGALLY CAST PRODUCTS
WB- 2580 EXAMINATION OF BOLTS, STUDS, AND NUTS WB- 2581 Required Examination
91 WB- 2600 MATERIAL ORGANIZATION’S QUALITY SYSTEM PROGRAMS
WB- 2610 DOCUMENTATION AND MAINTENANCE OF QUALITY SYSTEM PROGRAMS
92 WB- 2700 DIMENSIONAL STANDARDS
93 ARTICLE WB- 3000 DESIGN
WB- 3100 GENERAL DESIGN
WB- 3110 LOADING CRITERIA WB- 3111 Loading Conditions
94 WB- 3120 SPECIAL CONSIDERATIONS WB- 3121 Material Degradation
WB- 3130 GENERAL DESIGN RULES WB- 3131 Design Reports
96 TABLES
TABLE WB-3133.4-1 VALUES OF SPHERICAL RADIUS FACTOR, K1
98 WB- 3200 DESIGN OF CONTAINMENTS
WB- 3210 DESIGN CRITERIA WB- 3211 Requirements for Acceptability
102 WB- 3220 STRESS LIMITS FOR OTHER THAN BOLTS WB- 3221 Design Limits
103 TABLE WB-3217-1 CLASSIFICATION OF STRESS INTENSITY IN CONTAINMENTS FOR SOME TYPICAL CASES
105 FIGURES
FIG. WB-3221-1 STRESS CATEGORIES AND LIMITS OF STRESS INTENSITY FOR DESIGN LOADINGS
106 FIG. WB-3222-1 STRESS CATEGORIES AND LIMITS OF STRESS INTENSITY FOR NORMAL LOADINGS
110 FIG. WB-3224.1-1 STRESS CATEGORIES AND LIMITS OF STRESS INTENSITY FOR ACCIDENT LOADINGS FOR ELASTIC ANALYSIS
112 WB- 3230 STRESS LIMITS FOR BOLTS
113 WB- 3240 NOZZLES OR OPENINGS
WB- 3250 DESIGN OF WELDED CONSTRUCTION WB- 3251 Welded Joint Category
114 FIG. WB-3251-1 WELDED JOINT LOCATIONS TYPICAL OF CATEGORIES A, B, C, AND D
115 FIG. WB-3252-1 TYPICAL BUTT JOINTS
117 WB- 3260 SPECIAL CONTAINMENT REQUIREMENTS WB- 3261 Category A or Category B Joints Between Sections of Unequal Thickness
118 FIG. WB-3261-1 CATEGORY A AND B JOINTS BETWEEN SECTIONS OF UNEQUAL THICKNESS
119 ARTICLE WB- 4000 FABRICATION
WB- 4100 GENERAL REQUIREMENTS
WB- 4110 INTRODUCTION
WB- 4120 CERTIFICATION OF MATERIALS AND FABRICATION BY CERTIFICATE HOLDER WB- 4121 Means of Certification
120 WB- 4130 REPAIR OF MATERIAL WB- 4131 Elimination and Repair of Defects
WB- 4200 FORMING, FITTING, AND ALIGNING
WB- 4210 CUTTING, FORMING, AND BENDING WB- 4211 Cutting
121 WB- 4220 FORMING TOLERANCES WB- 4221 Tolerance for Containment Shells
122 WB- 4230 FITTING AND ALIGNING WB- 4231 Fitting and Aligning Methods
FIGURES
FIG. WB-4221.1-1 MAXIMUM DIFFERENCE IN CROSS-SECTIONAL DIAMETERS
123 FIG. WB-4221.2(a)-1 MAXIMUM PERMISSIBLE DEVIATION eFROM A TRUE CIRCULAR FORM
124 FIG. WB-4221.2(a)-2 MAXIMUM ARC LENGTH FOR DETERMINING PLUS OR MINUS DEVIATION
125 WB- 4240 REQUIREMENTS FOR WELD JOINTS IN CONTAINMENTS WB- 4241 Category A Weld Joints in Containments
TABLES
TABLE WB-4232-1 MAXIMUM ALLOWABLE OFFSET IN FINAL WELDED JOINTS
126 FIG. WB-4233(a)-1 BUTT WELD ALIGNMENT AND MISMATCH TOLERANCES FOR UNEQUAL I.D. AND O.D. WHEN ITEMS ARE WELDED FROM ONE SIDE AND FAIRING IS NOT PERFORMED
127 FIG. WB-4243-1 ACCEPTABLE FULL PENETRATION WELD DETAILS FOR CATEGORY C JOINTS
128 FIG. WB-4243-2 TYPICAL FLAT HEADS WITH HUBS
129 FIG. WB-4244(a)-1 NOZZLES ATTACHED BY FULL PENETRATION BUTT WELDS
130 FIG. WB-4244(b)-1 NOZZLES ATTACHED BY FULL PENETRATION CORNER WELDS
131 FIG. WB-4244(c)-1 DEPOSITED WELD METAL USED AS REINFORCEMENT OF OPENINGS FOR NOZZLES
132 FIG. WB-4244(d)-1 NOZZLES ATTACHED BY PARTIAL PENETRATION WELDS
133 WB- 4300 WELDING QUALIFICATIONS
WB- 4310 GENERAL REQUIREMENTS WB- 4311 Types of Processes Permitted
WB- 4320 WELDING QUALIFICATIONS, RECORDS, AND IDENTIFYING STAMPS WB- 4321 Required Qualifications
134 WB- 4330 GENERAL REQUIREMENTS FOR WELDING PROCEDURE QUALIFICATION TESTS WB- 4331 Conformance to Section IX Requirements
136 WB- 4400 RULES GOVERNING MAKING, EXAMINING, AND REPAIRING WELDS
WB- 4410 PRECAUTIONS TO BE TAKEN BEFORE WELDING WB- 4411 Identification, Storage, and Handling of Welding Material
137 WB- 4420 RULES FOR MAKING WELDED JOINTS WB- 4421 Backing Rings
138 FIG. WB-4427-1 FILLET WELD DETAILS
139 WB- 4430 WELDING OF ATTACHMENTS WB- 4431 Materials for Attachments
WB- 4450 REPAIR OF WELD METAL DEFECTS WB- 4451 General Requirements
140 FIG. WB-4433-1 TYPES OF ATTACHMENT WELDS
141 WB- 4600 HEAT TREATMENT
WB- 4610 WELDING PREHEAT REQUIREMENTS WB- 4611 When Preheat Is Necessary
WB- 4620 POSTWELD HEAT TREATMENT WB- 4621 Heating and Cooling Methods
142 TABLE WB-4622.1-1 MANDATORY REQUIREMENTS FOR POSTWELD HEAT TREATMENT OF WELDS
TABLE WB-4622.4(c)-1 ALTERNATIVE HOLDING TEMPERATURES AND TIMES
144 TABLE WB-4622.7(b)-1 EXEMPTIONS TO MANDATORY PWHT
146 FIG. WB-4622.9(c)(8)-1 TEMPER BEAD WELD REPAIR AND WELD TEMPER BEAD REINFORCEMENT
147 FIG. WB-4622.9(c)(8)-2 TEMPER BEAD REINFORCEMENT
148 FIG. WB-4622.9(f)-1 QUALIFICATION TEST PLATE
150 FIG. WB-4622.11(c)(6)-1 TEMPER BEAD WELD REPAIR AND WELD TEMPER BEAD REINFORCEMENT OF DISSIMILAR METAL WELDS OR BUTTERING
151 WB- 4630 HEAT TREATMENT OF WELDS OTHER THAN THE FINAL POSTWELD HEAT TREATMENT
152 WB- 4700 MECHANICAL JOINTS
WB- 4710 BOLTING AND THREADING WB- 4711 Thread Engagement
WB- 4720 BOLTING FLANGED JOINTS
153 ARTICLE WB- 5000 EXAMINATION
WB- 5100 GENERAL REQUIREMENTS FOR EXAMINATION
WB- 5110 PROCEDURES, QUALIFICATIONS, AND EVALUATION WB- 5111 General Requirements
WB- 5120 TIME OF EXAMINATION OF WELDS AND WELD METAL CLADDING
154 TABLE
TABLE WB-5111-1 THICKNESS, IQI DESIGNATIONS, ESSENTIAL HOLES, AND WIRE DIAMETERS
155 WB- 5130 EXAMINATION OF WELD EDGE PREPARATION SURFACES
WB- 5140 EXAMINATION OF ADJACENT BASE MATERIAL
WB- 5200 REQUIRED EXAMINATION OF WELDS
WB- 5210 CATEGORY A WELDED JOINTS
WB- 5220 CATEGORY B WELDED JOINTS
WB- 5230 CATEGORY C WELDED JOINTS WB- 5231 General Requirements
WB- 5240 CATEGORY D WELDED JOINTS WB- 5241 General Requirements
156 WB- 5260 FILLET, PARTIAL PENETRATION, SOCKET, AND ATTACHMENT WELDED JOINTS WB- 5261 Fillet, Partial Penetration, and Socket Welded Joints
WB- 5270 SPECIAL WELDED JOINTS WB- 5272 Weld Metal Cladding
WB- 5300 ACCEPTANCE STANDARDS
WB- 5320 RADIOGRAPHIC ACCEPTANCE STANDARDS
157 WB- 5330 ULTRASONIC ACCEPTANCE STANDARDS
WB- 5340 MAGNETIC PARTICLE ACCEPTANCE STANDARDS WB- 5341 Evaluation of Indications
WB- 5350 LIQUID PENETRANT ACCEPTANCE STANDARDS WB- 5351 Evaluation of Indications
158 WB- 5400 FINAL EXAMINATION OF CONTAINMENTS
WB- 5410 EXAMINATION AFTER HYDROSTATIC TEST
WB- 5500 QUALIFICATIONS AND CERTIFICATION OF NONDESTRUCTIVE EXAMINATION PERSONNEL
WB- 5510 GENERAL REQUIREMENTS
WB- 5520 PERSONNEL QUALIFICATION, CERTIFICATION, AND VERIFICATION WB- 5521 Qualification Procedure
159 WB- 5530 RECORDS
160 ARTICLE WB- 6000 TESTING
WB- 6100 GENERAL REQUIREMENTS
WB- 6110 SCOPE
WB- 6120 TESTING OF CONTAINMENTS
WB- 6130 PREPARATION FOR TESTING WB- 6131 Exposure of Joints
161 WB- 6200 HYDROSTATIC TESTS
WB- 6210 HYDROSTATIC TEST PROCEDURE WB- 6211 Venting During Fill Operation
WB- 6220 HYDROSTATIC TEST PRESSURE REQUIREMENTS WB- 6221 Minimum Hydrostatic Test Pressure
WB- 6300 PNEUMATIC TESTS
WB- 6310 PNEUMATIC TESTING PROCEDURES WB- 6311 General Requirements
WB- 6320 PNEUMATIC TEST PRESSURE REQUIREMENTS WB- 6321 Minimum Required Pneumatic Test Pressure
162 WB- 6400 TEST GAGES
WB- 6600 SPECIAL TEST PRESSURE SITUATIONS
WB- 6610 CONTAINMENTS DESIGNED FOR EXTERNAL PRESSURE
WB- 6620 TESTING OF COMBINATION UNITS WB- 6621 Pressure Chambers Designed to Operate Independently
WB- 6700 LEAK TESTING
WB- 6710 HELIUM LEAK TESTING
163 ARTICLE WB- 8000 NAMEPLATES, STAMPING, AND REPORTS
WB- 8100 GENERAL REQUIREMENTS
164 SUBSECTION WC CLASS SC STORAGE CONTAINMENTS
ARTICLE WC- 1000 INTRODUCTION
WC- 1100 SCOPE
WC- 1120 RULES FOR CLASS SC CONTAINMENTS
WC- 1130 BOUNDARIES OF JURISDICTION WC- 1131 Boundary of Containments
166 ARTICLE WC- 2000 MATERIAL
WC- 2100 GENERAL REQUIREMENTS FOR MATERIAL
WC- 2110 SCOPE OF PRINCIPAL TERMS EMPLOYED
WC- 2120 CONTAINMENT MATERIAL WC- 2121 Permitted Material Specifications
167 WC- 2130 CERTIFICATION OF MATERIAL
WC- 2140 WELDING MATERIALS
WC- 2150 MATERIAL IDENTIFICATION
168 WC- 2160 DETERIORATION OF MATERIAL IN SERVICE
WC- 2170 HEAT TREATMENT TO ENHANCE IMPACT PROPERTIES
WC- 2180 PROCEDURES FOR HEAT TREATMENT OF MATERIAL
WC- 2190 ATTACHMENT MATERIAL
WC- 2200 MATERIAL TEST COUPONS AND SPECIMENS FOR FERRITIC STEEL MATERIAL
WC- 2210 HEAT TREATMENT REQUIREMENTS WC- 2211 Test Coupon Heat Treatment for Ferritic Material2
169 WC- 2220 PROCEDURE FOR OBTAINING TEST COUPONS AND SPECIMENS FOR QUENCHED AND TEMPERED MATERIAL WC- 2221 General Requirements
170 WC- 2300 FRACTURE TOUGHNESS REQUIREMENTS FOR MATERIAL
WC- 2310 MATERIAL TO BE IMPACT TESTED WC- 2311 Material for Which Impact Testing Is Required
171 WC- 2320 IMPACT TEST PROCEDURES WC- 2321 Types of Tests WC- 2321.1 Drop Weight Tests.
TABLES
TABLE WC-2311(a)-1 EXEMPTIONS FROM IMPACT TESTING UNDER WC-2311(a)(7)
172 WC- 2330 TEST REQUIREMENTS AND ACCEPTANCE STANDARDS WC- 2331 Containment Material Test Methods and Temperature
TABLE WC-2332.1-1 REQUIRED Cv LATERAL EXPANSION VALUES FOR CONTAINMENT MATERIAL OTHER THAN BOLTING
173 WC- 2340 NUMBER OF IMPACT TESTS REQUIRED WC- 2341 Plates
TABLE WC-2332.1-2 REQUIRED Cv ENERGY VALUES FOR CONTAINMENT MATERIAL OTHER THAN BOLTING
TABLE WC-2332.3-1 REQUIRED Cv VALUES FOR BOLTING MATERIAL TESTED IN ACCORDANCE WITH WC-2332.3
174 WC- 2350 RETESTS WC- 2351 Retests for Material Other Than Bolting
WC- 2360 CALIBRATION OF INSTRUMENTS AND EQUIPMENT
WC- 2400 WELDING MATERIAL
WC- 2410 GENERAL REQUIREMENTS
175 WC- 2420 REQUIRED TESTS
176 WC- 2430 WELD METAL TESTS WC- 2431 Mechanical Properties Test
177 TABLE WC-2432.1-1 SAMPLING OF WELDING MATERIALS FOR CHEMICAL ANALYSIS
178 WC- 2440 STORAGE AND HANDLING OF WELDING MATERIAL
WC- 2500 EXAMINATION AND REPAIR OF CONTAINMENT MATERIAL
WC- 2510 CONTAINMENT MATERIAL
WC- 2530 EXAMINATION AND REPAIR OF PLATE WC- 2531 Required Examination
TABLE WC-2432.2-1 WELDING MATERIAL CHEMICAL ANALYSIS
179 FIGURE
FIG. WC-2433.1-1 WELD METAL DELTA FERRITE CONTENT
180 WC- 2540 EXAMINATION AND REPAIR OF FORGINGS AND BARS WC- 2541 Required Examinations
181 WC- 2550 EXAMINATION AND REPAIR OF SEAMLESS AND WELDED ( WITHOUT FILLER METAL) TUBULAR PRODUCTS AND FITTINGS WC- 2551 Required Examination
183 WC- 2560 EXAMINATION AND REPAIR OF TUBULAR PRODUCTS AND FITTINGS WELDED WITH FILLER METAL WC- 2561 Required Examination
184 WC- 2570 EXAMINATION AND REPAIR OF STATICALLY AND CENTRIFUGALLY CAST PRODUCTS
WC- 2580 EXAMINATION OF BOLTS, STUDS, AND NUTS WC- 2581 Requirements
WC- 2600 MATERIAL ORGANIZATIONS’ QUALITY SYSTEM PROGRAMS
WC- 2610 DOCUMENTATION AND MAINTENANCE OF QUALITY SYSTEM PROGRAMS
WC- 2700 DIMENSIONAL STANDARDS
185 ARTICLE WC- 3000 DESIGN
WC- 3100 GENERAL DESIGN
WC- 3110 LOADING CRITERIA WC- 3111 Loading Conditions
WC- 3120 SPECIAL CONSIDERATIONS WC- 3121 Corrosion
186 WC- 3130 GENERAL DESIGN RULES
188 TABLES
TABLE WC-3133.4-1 VALUES OF SPHERICAL RADIUS FACTOR K1
189 WC- 3200 DESIGN RULES FOR CONTAINMENTS
WC- 3210 GENERAL REQUIREMENTS WC- 3211 Basis for Use WC- 3211.1 Scope
191 TABLE WC-3217-1 STRESS INTENSITY kFACTORS FOR DESIGN AND OPERATING LOAD COMBINATIONS
194 WC- 3220 DESIGN CONSIDERATION WC- 3224 Containments Under Internal Pressure WC- 3224.1 General Requirements.
195 FIGURES
FIG. WC-3224.6-1 DESIGN CURVES FOR TORISPHERICAL HEADS AND 2:1 ELLIPSOIDAL HEADS FOR USE WITH WC-3224.8 AND WC-3224.6
197 WC- 3230 OPENINGS AND REINFORCEMENT WC- 3231 General Requirements
FIG. WC-3225-1 TYPICAL FLAT HEADS
198 FIG. WC-3225-2 SOME ACCEPTABLE TYPES OF UNSTAYED FLAT HEADS AND COVERS
199 FIG. WC-3225-3 ATTACHMENT OF FLAT HEADS TO CONTAINMENT SHELL
200 FIG. WC-3232.2-1 CHART FOR DETERMINING THE VALUE OF F
201 WC- 3250 DESIGN OF WELDED CONSTRUCTION WC- 3251 Welded Joint Categories
FIG. WC-3251-1 WELDED JOINT LOCATIONS TYPICAL OF CATEGORIES A, B, C, AND D
202 FIG. WC-3251-2 TYPICAL BUTT JOINTS
204 WC- 3260 SPECIAL CONTAINMENT REQUIREMENTS WC- 3261 Category A or B Joints Between Sections of Unequal Thickness
FIG. WC-3261-1 CATEGORY A AND B JOINTS BETWEEN SECTIONS OF UNEQUAL THICKNESS
TABLE WC-3262-1 STRESS REDUCTION FACTORS AND EXAMINATIONS FOR CLOSURE WELDS
205 ARTICLE WC- 4000 FABRICATION
WC- 4100 GENERAL REQUIREMENTS
WC- 4110 INTRODUCTION
WC- 4120 CERTIFICATION OF MATERIALS AND FABRICATION BY CERTIFICATE HOLDER WC- 4121 Means of Certification
206 WC- 4130 REPAIR OF MATERIAL
WC- 4200 FORMING, CUTTING, AND ALIGNING
WC- 4210 CUTTING, FORMING, AND BENDING WC- 4211 Cutting
207 WC- 4220 FORMING TOLERANCES WC- 4221 Tolerance for Containment Shells
FIGURES
FIG. WC-4221.1-1 MAXIMUM DIFFERENCE IN CROSS-SECTIONAL DIAMETERS
208 FIG. WC-4221.2(a)-1 MAXIMUM PERMISSIBLE DEVIATION eFROM A TRUE CIRCULAR FORM
209 WC- 4230 FITTING AND ALIGNING WC- 4231 Fitting and Aligning Methods
FIG. WC-4221.2(a)-2 MAXIMUM ARC LENGTH FOR DETERMINING PLUS OR MINUS DEVIATION
210 WC- 4260 REQUIREMENTS FOR WELD JOINTS IN CONTAINMENTS WC- 4262 Description and Limitations of Joint Types
TABLES
TABLE WC-4232(a)-1 MAXIMUM ALLOWABLE OFFSET IN FINAL WELDED JOINTS
211 FIG. WC-4233-1 BUTT WELD ALIGNMENT AND MISMATCH TOLERANCES FOR UNEQUAL I.D. AND O.D. WHEN ITEMS ARE WELDED FROM ONE SIDE AND FAIRING IS NOT PERFORMED
212 WC- 4300 WELDING QUALIFICATIONS
WC- 4310 GENERAL REQUIREMENTS WC- 4311 Types of Processes Permitted
213 FIG. WC-4265-1 ACCEPTABLE FULL PENETRATION WELD DETAILS FOR CATEGORY C JOINTS
214 WC- 4320 WELDING QUALIFICATIONS, RECORDS, AND IDENTIFYING STAMPS WC- 4321 Required Qualifications
FIG. WC-4265-2 TYPICAL PARTIAL PENETRATION WELD DETAIL FOR CATEGORY C FLAT HEAD CLOSURE JOINTS
215 FIG. WC-4265-3 TYPICAL FLAT HEADS
216 FIG. WC-4266(a)-1 NOZZLES ATTACHED BY FULL PENETRATION BUTT WELDS
217 FIG. WC-4266(b)-1 FULL PENETRATION CORNER WELDED ATTACHMENTS
218 FIG. WC-4266(c)-1 DEPOSITED WELD METAL USED AS REINFORCEMENT OF OPENINGS FOR NOZZLES
FIG. WC-4266(d)-1 FITTINGS WITH INTERNAL THREADS
219 WC- 4330 GENERAL REQUIREMENTS FOR WELDING PROCEDURE QUALIFICATION TESTS WC- 4331 Conformance to Section IX Requirements
FIG. WC-4266(e)-1 PARTIAL PENETRATION WELD CONNECTIONS
222 WC- 4400 RULES GOVERNING MAKING, EXAMINING, AND REPAIRING WELDS
WC- 4410 PRECAUTIONS TO BE TAKEN BEFORE WELDING WC- 4411 Identification, Storage, and Handling of Welding Materials
WC- 4420 RULES FOR MAKING WELDED JOINTS WC- 4421 Backing Rings
223 WC- 4430 WELDING OF ATTACHMENTS WC- 4431 Materials for Attachments
WC- 4450 REPAIR OF WELD METAL DEFECTS WC- 4451 General Requirements
224 FIG. WC-4427-1 FILLET AND SOCKET WELD DETAILS AND DIMENSIONS
225 FIG. WC-4433-1 TYPICAL TYPES OF ATTACHMENT WELDS
226 FIG. WC-4433-2 TYPICAL ATTACHMENTS
227 WC- 4500 BRAZING
WC- 4510 RULES FOR BRAZING WC- 4511 Where Brazing May Be Used
WC- 4520 BRAZING QUALIFICATION REQUIREMENTS WC- 4521 Brazing Procedure and Performance Qualification
WC- 4530 FITTING AND ALIGNING OF PARTS TO BE BRAZED
WC- 4540 EXAMINATION OF BRAZED JOINTS
WC- 4600 HEAT TREATMENT
WC- 4610 WELDING PREHEAT REQUIREMENTS WC- 4611 When Preheat Is Necessary
228 WC- 4620 POSTWELD HEAT TREATMENT WC- 4621 Heating and Cooling Methods
TABLE WC-4524-1 MAXIMUM DESIGN TEMPERATURES FOR BRAZING FILLER METAL, °F (°C)
229 TABLE WC-4622.1-1 MANDATORY REQUIREMENTS FOR POSTWELD HEAT TREATMENT OF WELDS
TABLE WC-4622.4(c)-1 ALTERNATIVE HOLDING TEMPERATURES AND TIMES
231 TABLE WC-4622.7(b)-1 EXEMPTIONS TO MANDATORY PWHT
233 FIG. WC-4622.10(c)(5)-1 TEMPER BEAD WELD REPAIR AND WELD TEMPER BEAD REINFORCEMENT
234 FIG. WC-4622.10(c)(5)-2 TEMPER BEAD REINFORCEMENT
235 FIG. WC-4622.10(f)-1 QUALIFICATION TEST PLATE
237 FIG. WC-4622.12(c)(6)-1 TEMPER BEAD WELD REPAIR AND WELD TEMPER BEAD REINFORCEMENT OF DISSIMILAR METAL WELDS OR BUTTERING
238 WC- 4630 HEAT TREATMENT OF WELDS OTHER THAN THE FINAL POSTWELD HEAT TREATMENT
239 WC- 4700 MECHANICAL JOINTS
WC- 4710 BOLTING AND THREADING WC- 4711 Thread Engagement
WC- 4720 BOLTING FLANGED JOINTS
240 ARTICLE WC- 5000 EXAMINATION
WC- 5100 GENERAL REQUIREMENTS FOR EXAMINATION
WC- 5110 PROCEDURES, QUALIFICATIONS, AND EVALUATION WC- 5111 General Requirements
WC- 5120 TIME OF EXAMINATION OF WELDS AND WELD METAL CLADDING
241 TABLE
TABLE WC-5111-1 THICKNESS, IQI DESIGNATIONS, ESSENTIAL HOLES, AND WIRE DIAMETERS
242 WC- 5130 EXAMINATION OF WELD EDGE PREPARATION SURFACES
WC- 5140 EXAMINATION OF ADJACENT BASE MATERIAL
WC- 5200 REQUIRED EXAMINATION OF WELDS
WC- 5210 CATEGORY A LONGITUDINAL WELDED JOINTS
WC- 5220 CATEGORY B CIRCUMFERENTIAL WELDED JOINTS
WC- 5230 CATEGORY C WELDED JOINTS WC- 5231 General Requirements
243 WC- 5240 CATEGORY D WELDED JOINTS WC- 5241 General Requirements
WC- 5250 EXAMINATION OF CONTAINMENT CLOSURE WELDS
WC- 5260 FILLET, PARTIAL PENETRATION, SOCKET, AND ATTACHMENT WELDED JOINTS WC- 5261 Fillet, Partial Penetration, and Socket Welded Joints
WC- 5270 SPECIAL WELDS AND BRAZED JOINTS WC- 5272 Weld Metal Cladding
244 WC- 5300 ACCEPTANCE STANDARDS
WC- 5320 RADIOGRAPHIC ACCEPTANCE STANDARDS
WC- 5330 ULTRASONIC ACCEPTANCE STANDARDS
WC- 5340 MAGNETIC PARTICLE ACCEPTANCE STANDARDS WC- 5341 Evaluation of Indications
245 WC- 5350 LIQUID PENETRANT ACCEPTANCE STANDARDS WC- 5351 Evaluation of Indications
WC- 5360 VISUAL ACCEPTANCE STANDARDS FOR BRAZED JOINTS
WC- 5400 FINAL EXAMINATION OF CONTAINMENTS
WC- 5410 EXAMINATION AFTER PRESSURE TEST
WC- 5500 QUALIFICATIONS AND CERTIFICATION OF NONDESTRUCTIVE EXAMINATION PERSONNEL
WC- 5510 GENERAL REQUIREMENTS
WC- 5520 PERSONNEL QUALIFICATION, CERTIFICATION, AND VERIFICATION WC- 5521 Qualification Procedure
246 WC- 5530 RECORDS
247 ARTICLE WC- 6000 TESTING
WC- 6100 GENERAL REQUIREMENTS
WC- 6110 SCOPE
WC- 6120 TESTING OF CONTAINMENTS
WC- 6130 PREPARATION FOR TESTING WC- 6131 Exposure of Joints
248 WC- 6200 HYDROSTATIC TESTS
WC- 6210 HYDROSTATIC TEST PROCEDURE WC- 6211 Venting During Fill Operation
WC- 6220 HYDROSTATIC TEST PRESSURE REQUIREMENTS WC- 6221 Minimum Hydrostatic Test Pressure
WC- 6300 PNEUMATIC TESTS
WC- 6310 PNEUMATIC TESTING PROCEDURES WC- 6311 General Requirements
249 WC- 6320 PNEUMATIC TEST PRESSURE REQUIREMENTS WC- 6321 Minimum Required Pneumatic Test Pressure
WC- 6400 TEST GAGES
WC- 6600 SPECIAL TEST PRESSURE SITUATIONS
WC- 6610 CONTAINMENTS DESIGNED FOR EXTERNAL PRESSURE
WC- 6620 PRESSURE TESTING OF COMBINATION UNITS WC- 6621 Pressure Chambers Designed to Operate Independently
WC- 6700 LEAK TESTING
WC- 6710 HELIUM LEAK TESTING
250 WC- 6720 CONTAINMENT CLOSURES
251 ARTICLE WC- 8000 NAMEPLATES, STAMPING, AND REPORTS
WC- 8100 GENERAL REQUIREMENTS
252 NONMANDATORY APPENDIX A CODES, STANDARDS, AND SPECIFICATIONS REFERENCED IN TEXT
A- 1 AISC STANDARDS
A- 2 API STANDARD
A- 3 APHA STANDARD
A- 4 ASME STANDARDS
A- 5 ASNT STANDARD
A- 6 ASTM STANDARDS

Related products

ASME BPVC III 3 2010
$377.00