ASME BPVC III 3 2013

$377.00

ASME BPVC – III – 3 -2013 BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste

Published By	Publication Date	Number of Pages
ASME	2013

Guaranteed Safe Checkout

Category: ASME

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

None

PDF Catalog

PDF Pages	PDF Title
54	WA-4134.17-1 Lifetime Quality Assurance Records WA-4134.17-2 Nonpermanent Quality Assurance Records
58	WA-7100-1 Dimensional Standards
59	WA-7100-2 Standards and Specifications Referenced in Text
60	WA-8100-1 Authorizations and Certification Mark Issued by the Society for the Construction of Transportation and Storage Containments and Parts
62	WA-8212-1 Form of Stamping
64	N-7
66	N-8
67	N-9
79	WB-2331.2-1 Required LST‐RTNDT Values for Ferritic Steel Material for Containment Material WB-2331.2-2 Required Fracture Toughness Values for Ferritic Steel Material for Containments Having a Specified Yield Strength of 50 ksi (350 000 kPa) or Less at 100°F (38°C) WB-2332(a)-1 Required Cv Values for Piping
80	WB-2333-1 Required Cv Values for Bolting Material
83	WB-2432.1-1 Sampling of Welding Materials for Chemical Analysis
84	WB-2432.2-1 Chemical Analysis for Welding Material
85	WB-2433.1-1 Weld Metal Delta Ferrite Content
90	WB-2552.1-1 Axial Propagation of Sound in Tube Wall
99	WB-3133.4-1 Values of Spherical Radius Factor, K1
105	WB-3217-1 Classification of Stress Intensity in Containments for Some Typical Cases
106	WB-3221-1 Stress Categories and Limits of Stress Intensity for Design Loadings
107	WB-3222-1 Stress Categories and Limits of Stress Intensity for Normal Loadings
112	WB-3224.1-1 Stress Categories and Limits of Stress Intensity for Accident Loadings for Elastic Analysis
116	WB-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
117	WB-3252-1 Typical Butt Joints
119	WB-3261-1 Categories A and B Joints Between Sections of Unequal Thickness
122	WB-4221.1-1 Maximum Difference in Cross‐Sectional Diameters
123	WB-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
124	WB-4221.2(a)-2 Maximum ARC Length for Determining Plus or Minus Deviation
125	WB-4232-1 Maximum Allowable Offset in Final Welded Joints
126	WB-4233(a)-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
127	WB-4243-1 Acceptable Full Penetration Weld Details for Category C Joints
128	WB-4243-2 Typical Flat Heads With Hubs
129	WB-4244(a)-1 Nozzles Attached by Full Penetration Butt Welds
130	WB-4244(b)-1 Nozzles Attached by Full Penetration Corner Welds
131	WB-4244(c)-1 Deposited Weld Metal Used As Reinforcement of Openings for Nozzles
132	WB-4244(d)-1 Nozzles Attached by Partial Penetration Welds
137	WB-4427-1 Fillet Weld Details
139	WB-4433-1 Types of Attachment Welds
141	WB-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds WB-4622.4(c)-1 Alternative Holding Temperatures and Times
142	WB-4622.7(b)-1 Exemptions to Mandatory PWHT
144	WB-4622.9(c)(8)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
145	WB-4622.9(c)(8)-2 Temper Bead Reinforcement
146	WB-4622.9(f)-1 Qualification Test Plate
148	WB-4622.11(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
152	WB-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
169	WC-2311(a)-1 Exemptions From Impact Testing Under WC-2311(a)(7)
170	WC-2332.1-1 Required Cv Lateral Expansion Values for Containment Material Other Than Bolting
171	WC-2332.1-2 Required Cv Energy Values for Containment Material Other Than Bolting WC-2332.3-1 Required Cv Values for Bolting Material Tested in Accordance With WC-2332.3
175	WC-2432.1-1 Sampling of Welding Materials for Chemical Analysis
176	WC-2432.2-1 Welding Material Chemical Analysis
177	WC-2433.1-1 Weld Metal Delta Ferrite Content
187	WC-3133.4-1 Values of Spherical Radius Factor K1
190	WC-3217-1 Stress Intensity k Factors for Design and Operating Load Combinations
194	WC-3224.6-1 Design Curves for Torispherical Heads and 2:1 Ellipsoidal Heads for Use With WC-3224.8 and WC-3224.6
195	WC-3225-1 Typical Flat Heads
196	WC-3225-2 Some Acceptable Types of Unstayed Flat Heads and Covers
197	WC-3225-3 Attachment of Flat Heads to Containment Shell
198	WC-3232.2-1 Chart for Determining the Value of F
200	WC-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
201	WC-3251-2 Typical Butt Joints
203	WC-3261-1 Categories A and B Joints Between Sections of Unequal Thickness
204	WC-3262-1 Stress Reduction Factors and Examinations for Closure Welds
207	WC-4221.1-1 Maximum Difference in Cross‐Sectional Diameters
208	WC-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
209	WC-4221.2(a)-2 Maximum ARC Length for Determining Plus or Minus Deviation
210	WC-4232(a)-1 Maximum Allowable Offset in Final Welded Joints
211	WC-4233-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
212	WC-4265-1 Acceptable Full Penetration Weld Details for Category C Joints
213	WC-4265-2 Typical Partial Penetration Weld Detail for Category C Flat Head Closure Joints
214	WC-4265-3 Typical Flat Heads
215	WC-4266(a)-1 Nozzles Attached by Full Penetration Butt Welds
216	WC-4266(b)-1 Full Penetration Corner Welded Attachments
217	WC-4266(c)-1 Deposited Weld Metal Used As Reinforcement of Openings for Nozzles WC-4266(d)-1 Fittings With Internal Threads
218	WC-4266(e)-1 Partial Penetration Weld Connections
223	WC-4427-1 Fillet and Socket Weld Details and Dimensions
224	WC-4433-1 Typical Types of Attachment Welds
225	WC-4433-2 Typical Attachments
227	WC-4524-1 Maximum Design Temperatures for Brazing Filler Metal, °F (°C)
228	WC-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds WC-4622.4(c)-1 Alternative Holding Temperatures and Times
229	WC-4622.7(b)-1 Exemptions to Mandatory PWHT
232	WC-4622.10(c)(7)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
233	WC-4622.10(c)(7)-2 Temper Bead Reinforcement
234	WC-4622.10(f)-1 Qualification Test Plate
236	WC-4622.12(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
239	WC-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
255	INTERPRETATIONS Volume 62

Additional information

Standard Title	ASME BPVC – III – 3 -2013 BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste
Published Code	ASME
Publication Date	2013

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASME BPVC III 3 2013

PDF Catalog

Related products