🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME BPVC III 3 2017

ASME BPVC III 3 2017

$377.00

ASME BPVC – III – 3 -2017 BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste

Published By Publication Date Number of Pages
ASME 2017 335
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

None

PDF Catalog

PDF Pages PDF Title
67 WA-4134.17-1 Lifetime Quality Assurance Records
WA-4134.17-2 Nonpermanent Quality Assurance Records
71 WA-7100-1 Dimensional Standards
72 WA-7100-2 Standards and Specifications Referenced in Division 3
73 WA-8100-1 Authorizations and Certification Mark Issued by the Society for the Construction of Transportation and Storage Components and Parts
75 WA-8212-1 Form of Stamping
77 N-7 Nuclear Containments
79 N-8 For Class SC or TC Closure Welds
80 N-9 Shop Fabricated Parts
82 N-11 Certificate Holder’s Data Report for Internal Support Structures
93 WB-2331.2-1 Required LST‐RTNDT Values for Ferritic Steel Material for Containment Material
WB-2331.2-2 Required Fracture Toughness Values for Ferritic Steel Material for Containments Having a Specified Yield Strength of 50 ksi (350 000 kPa) or Less at 100°F (38°C)
94 WB-2332(a)-1 Required Cv Values for Piping
WB-2333-1 Required Cv Values for Bolting Material
97 WB-2432.1-1 Sampling of Welding Materials for Chemical Analysis
98 WB-2432.2-1 Chemical Analysis for Welding Material
99 WB-2433.1-1 Weld Metal Delta Ferrite Content
104 WB-2552.1-1 Axial Propagation of Sound in Tube Wall
113 WB-3133.4-1 Values of Spherical Radius Factor, K1
119 WB-3217-1 Classification of Stress Intensity in Containments for Some Typical Cases
121 WB-3221-1 Stress Categories and Limits of Stress Intensity for Design Loadings
122 WB-3222-1 Stress Categories and Limits of Stress Intensity for Normal Loadings
126 WB-3224.1-1 Stress Categories and Limits of Stress Intensity for Accident Loadings for Elastic Analysis
130 WB-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
131 WB-3252-1 Typical Butt Joints
134 WB-3261-1 Categories A and B Joints Between Sections of Unequal Thickness
138 WB-4221.1-1 Maximum Difference in Cross‐Sectional Diameters
139 WB-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
140 WB-4221.2(a)-2 Maximum ARC Length for Determining Plus or Minus Deviation
WB-4232-1 Maximum Allowable Offset in Final Welded Joints
141 WB-4233(a)-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
142 WB-4243-1 Acceptable Full Penetration Weld Details for Category C Joints
143 WB-4243-2 Typical Flat Heads With Hubs
144 WB-4244(a)-1 Nozzles Attached by Full Penetration Butt Welds
145 WB-4244(b)-1 Nozzles Attached by Full Penetration Corner Welds
147 WB-4244(c)-1 Deposited Weld Metal Used as Reinforcement of Openings for Nozzles
148 WB-4244(d)-1 Nozzles Attached by Partial Penetration Welds
153 WB-4427-1 Fillet Weld Details
154 WB-4433-1 Types of Attachment Welds
156 WB-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds
WB-4622.4(c)-1 Alternative Holding Temperatures and Times
157 WB-4622.7(b)-1 Exemptions to Mandatory PWHT
159 WB-4622.9(c)(8)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
160 WB-4622.9(c)(8)-2 Temper Bead Reinforcement
161 WB-4622.9(f)-1 Qualification Test Plate
164 WB-4622.11(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
167 WB-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
184 WC-2311(a)-1 Exemptions From Impact Testing Under WC-2311(a)(7)
185 WC-2332.1-1 Required Cv Lateral Expansion Values for Containment Material Other Than Bolting
186 WC-2332.1-2 Required Cv Energy Values for Containment Material Other Than Bolting
WC-2332.3-1 Required Cv Values for Bolting Material Tested in Accordance With WC-2332.3
190 WC-2432.1-1 Sampling of Welding Materials for Chemical Analysis
191 WC-2432.2-1 Welding Material Chemical Analysis
192 WC-2433.1-1 Weld Metal Delta Ferrite Content
203 WC-3133.4-1 Values of Spherical Radius Factor, K1
206 WC-3217-1 Stress Intensity k Factors for Design and Operating Load Combinations
209 WC-3224.6-1 Design Curves for Torispherical Heads and 2:1 Ellipsoidal Heads for Use With WC-3224.8 and WC-3224.6
211 WC-3225-1 Typical Flat Heads
212 WC-3225-2 Some Acceptable Types of Unstayed Flat Heads and Covers
213 WC-3225-3 Attachment of Flat Heads to Containment Shell
215 WC-3232.2-1 Chart for Determining the Value of F
216 WC-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
217 WC-3251-2 Typical Butt Joints
219 WC-3261-1 Categories A and B Joints Between Sections of Unequal Thickness
WC-3262-1 Stress Reduction Factors and Examinations for Closure Welds
223 WC-4221.1-1 Maximum Difference in Cross‐Sectional Diameters
224 WC-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
225 WC-4221.2(a)-2 Maximum ARC Length for Determining Plus or Minus Deviation
226 WC-4232(a)-1 Maximum Allowable Offset in Final Welded Joints
227 WC-4233-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
228 WC-4265-1 Acceptable Full Penetration Weld Details for Category C Joints
229 WC-4265-2 Typical Partial Penetration Weld Detail for Category C Flat Head Closure Joints
230 WC-4265-3 Typical Flat Heads
231 WC-4266(a)-1 Nozzles Attached by Full Penetration Butt Welds
232 WC-4266(b)-1 Full Penetration Corner-Welded Attachments
233 WC-4266(c)-1 Deposited Weld Metal Used as Reinforcement of Openings for Nozzles
WC-4266(d)-1 Fittings With Internal Threads
234 WC-4266(e)-1 Partial Penetration Weld Connections
239 WC-4427-1 Fillet and Socket Weld Details and Dimensions
240 WC-4433-1 Typical Types of Attachment Welds
241 WC-4433-2 Typical Attachments
243 WC-4524-1 Maximum Design Temperatures for Brazing Filler Metal, °F (°C)
244 WC-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds
245 WC-4622.4(c)-1 Alternative Holding Temperatures and Times
246 WC-4622.7(b)-1 Exemptions to Mandatory PWHT
248 WC-4622.10(c)(7)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
249 WC-4622.10(c)(7)-2 Temper Bead Reinforcement
250 WC-4622.10(f)-1 Qualification Test Plate
252 WC-4622.12(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
256 WC-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
268 WD-1131-1 Jurisdictional Boundary Between the Internal Support Structure and the Containment
273 WD-2331(a)-1 Required Cv Values for Internal Support Structure Material With 2 in. (50 mm) Maximum Thickness (Other Than Bolting)
274 WD-2333-1 Required Cv Values for Bolting Material
278 WD-2432.1-1 Sampling of Welding Materials for Chemical Analysis
WD-2432.2-1 Welding Material Chemical Analysis
279 WD-2433.1-1 Weld Metal Delta Ferrite Content
291 WD-3217-1 Classification of Stress Intensities for Some Typical Cases
292 WD-3221-1 Stress Categories and Limits of Stress Intensities for Design Loadings
293 WD-3222-1 Stress Categories and Limits of Stress Intensities for Normal Loadings
297 WD-3224-1 Stress Categories and Limits of Stress Intensities for Off-Normal Loadings
301 WD-3229.2-1 Values of K for Various Boundary Conditions and a/b Ratios
302 WD-3234-1 Stress Limit Factors for Bolt Design by Analysis
303 WD-3234.1(d)-1 Effective Slip Coefficient Versus Surface Condition
304 WD-3234.2-1 Maximum Sizes of Bolt Holes
WD-3234.3(a)-1 Minimum Edge Distances
305 WD-3234.4-1 Increment C1 for Minimum Spacing Between Oversized and Slotted Holes
WD-3235.4-1 Classification of Loading Conditions
306 WD-3235.5-1 Stress Categories
WD-3235.6-1 Allowable Stress Ranges
307 WD-3240-1 Permissible Welded Joints and Design Factors
317 WD-4427-1 Fillet Weld Details and Dimensions
318 WD-4441-1 Weld Inlay and Overlay Specifications
320 WD-4622.1-1 Mandatory Requirements for Postweld Heat Treatment (PWHT) of Welds
321 WD-4622.4(c)-1 Alternative Holding Temperatures and Times
322 WD-4622.7(b)-1 Exemptions to Mandatory PWHT
326 WD-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters

Related products

ASME BPVC III 3 2017
$377.00