🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME BPVC III 3 2021

ASME BPVC III 3 2021

$290.00

ASME BPVC – III – 3 -2021 BPVC Section III, Rules for Construction of Nuclear Facility Components, Division 3, Containment Systems for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material

Published By Publication Date Number of Pages
ASME 2021 330
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This Division contains requirements for the design and construction of the containment systems for nuclear spent fuel or high-level radioactive material transport packaging. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.

PDF Catalog

PDF Pages PDF Title
5 TABLE OF CONTENTS
12 LIST OF SECTIONS
13 INTERPRETATIONS
CODE CASES
14 FOREWORD
16 STATEMENT OF POLICY ON THE USE OF THE ASME SINGLE CERTIFICATION MARK AND CODE AUTHORIZATION IN ADVERTISING
STATEMENT OF POLICY ON THE USE OF ASME MARKING TO IDENTIFY MANUFACTURED ITEMS
17 SUBMITTAL OF TECHNICAL INQUIRIES TO THE BOILER AND PRESSURE VESSEL STANDARDS COMMITTEES
20 PERSONNEL
41 ORGANIZATION OF SECTION III
1 GENERAL
42 2 SUBSECTIONS
3 ARTICLES
4 SUBARTICLES
5 SUBSUBARTICLES
6 PARAGRAPHS
7 SUBPARAGRAPHS
8 SUBSUBPARAGRAPHS
43 9 REFERENCES
45 SUMMARY OF CHANGES
47 LIST OF CHANGES IN RECORD NUMBER ORDER
48 CROSS-REFERENCING AND STYLISTIC CHANGES IN THE BOILER AND PRESSURE VESSEL CODE
49 Subsection WA General Requirements
Article WA-1000 Scope of Division 3
WA-1100 Scope
WA-1110 Nature of These Rules and Containment Systems to Which They Are Applicable
WA-1120 Definitions
WA-1130 Limits of These Rules
WA-1140 Use of Code Editions and Cases
50 WA-1150 Units of Measure
WA-1200 General Requirements
WA-1210 Valves
WA-1220 Materials
WA-1230 Parts
51 Article WA-2000 Design Basis
WA-2100 General Requirements
WA-2110 Scope
WA-2120 Design Basis
52 WA-2130 Special Requirements
53 Article WA-3000 Responsibilities and Duties
WA-3100 General
WA-3110 Responsibilities vs. Legal Liabilities
WA-3120 Authorization
54 WA-3130 Welding and Subcontracting of Welding
55 WA-3300 Responsibilities of an N3 Certificate Holder
WA-3320 Categories of the N3 Certificate Holder’s Responsibilities
WA-3330 Obtaining a Certificate
WA-3340 Compliance With This Division
WA-3350 Design Documents
57 WA-3360 Fabrication Specification
WA-3370 Responsibility for Quality Assurance
58 WA-3380 Data Reports
WA-3390 N3 Certificate Holder’s Responsibility for Records
WA-3400 Responsibilities of an NPT Certificate Holder
WA-3420 Categories of an NPT Certificate Holder’s Responsibilities
WA-3430 Obtaining a Certificate
WA-3440 Compliance With This Division
WA-3450 Responsibility for Quality Assurance
WA-3460 Documentation of Quality Assurance Program
WA-3470 Data Report
WA-3800 Metallic Material
WA-3810 Scope and Applicability
59 WA-3820 Material Organizations
60 Article WA-4000 Quality Assurance
WA-4100 Requirements
WA-4110 Scope and Applicability
WA-4120 Definitions
WA-4130 Establishment and Implementation
61 TABLES
Table WA-4134.17-1 Lifetime Quality Assurance Records
Table WA-4134.17-2 Nonpermanent Quality Assurance Records
62 Article WA-5000 Authorized Inspection
WA-5100 Introduction
WA-5110 Applicability
WA-5120 Performance of Inspection
WA-5130 Access for Inspection Agency Personnel
WA-5200 Duties of Inspector
WA-5210 General Inspection Duties
63 WA-5220 Categories of Inspector’s Duties
WA-5230 Scope of Work, Design Specifications, Design Reports, and Fabrication Specifications
WA-5240 Quality Assurance Programs
WA-5250 Qualification Records
64 WA-5260 Materials, Parts, and Heat Treatment
WA-5270 Examinations and Tests
WA-5280 Final Tests
WA-5290 Data Reports
WA-5300 Responsibilities of the Authorized Inspection Agency
66 Article WA-7000 Reference Standards
WA-7100 General Requirements
67 Table WA-7100-1 Dimensional Standards
68 Table WA-7100-2 Standards and Specifications Referenced in Division 3
69 Article WA-8000 Certificates of Authorization, Nameplates, Certification Mark, and Data Reports
WA-8100 Authorization to Perform Code Activities
WA-8110 General
WA-8120 Scope of Authorization
WA-8130 Inspection Agreement Required
WA-8140 Quality Assurance Program Requirements
Table WA-8100-1 Authorizations and Certification Mark Issued by the Society for the Construction of Transportation and Storage Components and Parts
70 WA-8150 Application for Authorization
WA-8160 Evaluation for Authorization
WA-8170 Issuance of Authorization
WA-8180 Renewal of Authorization
WA-8200 Nameplates and Stamping With Certification Mark
WA-8210 General Requirements
71 WA-8220 Nameplates
WA-8230 Nameplates for Certification Mark With NPT Designator Items
WA-8300 Certification Mark
WA-8310 General Requirements
FIGURES
Figure WA-8212-1 Form of Stamping
72 WA-8330 Removable Items
WA-8400 Data Reports
WA-8410 General Requirements
73 FORMS
Form N-7 Nuclear Containments
75 Form N-8 For Class SC or TC Closure Welds
76 Form N-9 Shop Fabricated Parts
78 Form N-11 Certificate Holder’s Data Report for Internal Support Structures
79 Article WA-9000 Glossary
WA-9100 Introduction
WA-9200 Definitions
81 Subsection WB Class TC Transportation Containments
Article WB-1000 Introduction
WB-1100 Scope
WB-1120 Limits of Rules for Class TC Transportation Containments
WB-1130 Boundaries of Jurisdiction
83 Article WB-2000 Material
WB-2100 General Requirements for Material
WB-2110 Scope of Principal Terms Employed
WB-2120 Containment Material
84 WB-2130 Certification of Material
WB-2140 Welding Material
WB-2150 Material Identification
85 WB-2160 Deterioration of Material in Service
WB-2170 Heat Treatment to Enhance Impact Properties
WB-2180 Procedures for Heat Treatment of Material
WB-2190 Material Not Performing a Containment Function
WB-2200 Material Test Coupons and Specimens for Ferritic Steel Material and Ductile Cast Iron
WB-2210 Heat Treatment Requirements
86 WB-2220 Procedure for Obtaining Test Coupons and Specimens for Quenched and Tempered Material and for Ductile Cast Iron
87 WB-2300 Fracture Toughness Requirements for Material
WB-2310 Material to Be Toughness Tested
88 WB-2320 Impact Test Procedures
WB-2330 Test Requirements and Acceptance Standards5
89 Table WB-2331.2-1 Required LST − RTNDT Values for Ferritic Steel Material for Containment Material
Table WB-2331.2-2 Required Fracture Toughness Values for Ferritic Steel Material for Containments Having a Specified Yield Strength of 50 ksi (350 000 kPa) or Less at 100°F (38°C)
90 WB-2340 Number of Toughness Tests Required
Table WB-2332(a)-1 Required Cv Values for Piping
Table WB-2333-1 Required Cv Values for Bolting Material
91 WB-2350 Retests
WB-2360 Calibration of Instruments and Equipment
WB-2400 Welding Material
WB-2410 General Requirements
WB-2420 Required Tests
93 WB-2430 Weld Metal Tests
94 Table WB-2432.1-1 Sampling of Welding Materials for Chemical Analysis
Table WB-2432.2-1 Chemical Analysis for Welding Material
95 Figure WB-2433.1-1 Weld Metal Delta Ferrite Content
96 WB-2440 Storage and Handling of Welding Material
WB-2500 Examination and Repair of Containment Material
WB-2510 Examination of Containment Material
WB-2520 Examination After Quenching and Tempering
WB-2530 Examination and Repair of Plate
97 WB-2540 Examination and Repair of Forgings and Bars
99 WB-2550 Examination and Repair of Seamless and Welded Tubular Products and Fittings
100 Figure WB-2552.1-1 Axial Propagation of Sound in Tube Wall
102 WB-2570 Examination and Repair of Cast Products
104 WB-2580 Examination of Bolts, Studs, and Nuts
105 WB-2600 Material Organization’s Quality System Programs
WB-2610 Documentation and Maintenance of Quality System Programs
106 WB-2700 Dimensional Standards
107 Article WB-3000 Design
WB-3100 General Design
WB-3110 Loading Criteria
108 WB-3120 Special Considerations
WB-3130 General Design Rules
111 Table WB-3133.4-1 Values of Spherical Radius Factor, K1
112 WB-3200 Design of Containments
WB-3210 Design Criteria
115 WB-3220 Stress Limits for Other Than Bolts
116 Table WB-3217-1 Classification of Stress Intensity in Containments for Some Typical Cases
118 Figure WB-3221-1 Stress Categories and Limits of Stress Intensity for Design Loadings
119 Figure WB-3222-1 Stress Categories and Limits of Stress Intensity for Normal Loadings
125 Figure WB-3224.1-1 Stress Categories and Limits of Stress Intensity for Accident Loadings for Elastic Analysis
127 WB-3230 Stress Limits for Bolts
128 WB-3240 Nozzles or Openings
WB-3250 Design of Welded Construction
129 Figure WB-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
130 Figure WB-3252-1 Typical Butt Joints
131 WB-3260 Special Containment Requirements
132 WB-3700 Strain-Based Acceptance Criteria
Figure WB-3261-1 Category A and B Joints Between Sections of Unequal Thickness
133 Article WB-4000 Fabrication
WB-4100 General Requirements
WB-4110 Introduction
WB-4120 Certification of Materials and Fabrication by Certificate Holder
134 WB-4130 Repair of Material
WB-4200 Forming, Fitting, and Aligning
WB-4210 Cutting, Forming, and Bending
135 WB-4220 Forming Tolerances
136 Figure WB-4221.1-1 Maximum Difference in Cross‐Sectional Diameters
Figure WB-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
138 WB-4230 Fitting and Aligning
Table WB-4232-1 Maximum Allowable Offset in Final Welded Joints
139 WB-4240 Requirements for Weld Joints in Containments
Figure WB-4233(a)-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
140 Figure WB-4243-1 Acceptable Full Penetration Weld Details for Category C Joints
141 Figure WB-4243-2 Typical Flat Heads With Hubs
142 WB-4300 Welding Qualifications
WB-4310 General Requirements
Figure WB-4244(a)-1 Nozzles Attached by Full Penetration Butt Welds
143 Figure WB-4244(b)-1 Nozzles Attached by Full Penetration Corner Welds
144 Figure WB-4244(c)-1 Deposited Weld Metal Used as Reinforcement of Openings for Nozzles
145 WB-4320 Welding Qualifications, Records, and Identifying Stamps
Figure WB-4244(d)-1 Nozzles Attached by Partial Penetration Welds
146 WB-4330 General Requirements for Welding Procedure Qualification Tests
149 WB-4400 Rules Governing Making, Examining, and Repairing Welds
WB-4410 Precautions to Be Taken Before Welding
WB-4420 Rules for Making Welded Joints
150 WB-4430 Welding of Attachments
Figure WB-4427-1 Fillet Weld Details
151 WB-4450 Repair of Weld Metal Defects
152 Figure WB-4433-1 Types of Attachment Welds
153 WB-4600 Heat Treatment
WB-4610 Welding Preheat Requirements
WB-4620 Postweld Heat Treatment
154 Table WB-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds
Table WB-4622.4(c)-1 Alternative Holding Temperatures and Times
155 Table WB-4622.7(b)-1 Exemptions to Mandatory PWHT
157 Figure WB-4622.9(c)(8)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
158 Figure WB-4622.9(c)(8)-2 Temper Bead Reinforcement
159 Figure WB-4622.9(f)-1 Qualification Test Plate
162 Figure WB-4622.11(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
163 WB-4630 Heat Treatment of Welds Other Than the Final Postweld Heat Treatment
WB-4700 Mechanical Joints
WB-4710 Bolting and Threading
WB-4720 Bolting Flanged Joints
164 Article WB-5000 Examination
WB-5100 General Requirements for Examination
WB-5110 Procedures, Qualifications, and Evaluation
WB-5120 Time of Examination of Welds and Weld Metal Cladding
165 Table WB-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
166 WB-5130 Examination of Weld Edge Preparation Surfaces
WB-5140 Examination of Adjacent Base Material
WB-5200 Required Examination of Welds
WB-5210 Category A Welded Joints
WB-5220 Category B Welded Joints
WB-5230 Category C Welded Joints
WB-5240 Category D Welded Joints
167 WB-5260 Fillet, Partial Penetration, and Attachment Welded Joints
WB-5270 Special Welded Joints
WB-5300 Acceptance Standards
WB-5320 Radiographic Acceptance Standards
168 WB-5330 Ultrasonic Acceptance Standards
WB-5340 Magnetic Particle Acceptance Standards
WB-5350 Liquid Penetrant Acceptance Standards
169 WB-5400 Final Examination of Containments
WB-5410 Examination After Hydrostatic Test
WB-5500 Qualifications and Certification of Nondestructive Examination Personnel
WB-5510 General Requirements
WB-5520 Personnel Qualification, Certification, and Verification
170 WB-5530 Records
171 Article WB-6000 Testing
WB-6100 General Requirements
WB-6110 Scope
WB-6120 Testing of Containments
WB-6130 Preparation for Testing
172 WB-6200 Hydrostatic Tests
WB-6210 Hydrostatic Test Procedure
WB-6220 Hydrostatic Test Pressure Requirements
WB-6300 Pneumatic Tests
WB-6310 Pneumatic Testing Procedures
WB-6320 Pneumatic Test Pressure Requirements
173 WB-6400 Test Gages
WB-6410  
WB-6600 Special Test Pressure Situations
WB-6610 Containments Designed for External Pressure
WB-6620 Testing of Combination Units
WB-6700 Leak Testing
WB-6710 Helium Leak Testing
174 Article WB-8000 Nameplates, Stamping With Certification Mark, and Reports
WB-8100 General Requirements
175 Subsection WC Class SC Storage Containments
Article WC-1000 Introduction
WC-1100 Scope
WC-1120 Limits of Rules for Class SC Storage Containments
WC-1130 Boundaries of Jurisdiction
177 Article WC-2000 Material
WC-2100 General Requirements for Material
WC-2110 Scope of Principal Terms Employed
WC-2120 Containment Material
179 WC-2130 Certification of Material
WC-2140 Welding Materials
WC-2150 Material Identification
WC-2160 Deterioration of Material in Service
WC-2170 Heat Treatment to Enhance Impact Properties
WC-2180 Procedures for Heat Treatment of Material
WC-2190 Attachment Material
180 WC-2200 Material Test Coupons and Specimens for Ferritic Steel Material and Ductile Cast Iron
WC-2210 Heat Treatment Requirements
WC-2220 Procedure for Obtaining Test Coupons and Specimens for Quenched and Tempered Material and for Ductile Cast Iron
182 WC-2300 Fracture Toughness Requirements for Material
WC-2310 Material to Be Impact Tested
Table WC-2311(a)-1 Exemptions From Impact Testing Under WC-2311(a)(7)
183 WC-2320 Impact Test Procedures
WC-2330 Test Requirements and Acceptance Standards
184 Table WC-2332.1-1 Required Cv Lateral Expansion Values for Containment Material Other Than Bolting
Table WC-2332.1-2 Required Cv Energy Values for Containment Material Other Than Bolting
185 WC-2340 Number of Impact Tests Required
Table WC-2332.3-1 Required Cv Values for Bolting Material Tested in Accordance With WC-2332.3
186 WC-2350 Retests
WC-2360 Calibration of Instruments and Equipment
WC-2400 Welding Material
WC-2410 General Requirements
WC-2420 Required Tests
187 WC-2430 Weld Metal Tests
189 Table WC-2432.1-1 Sampling of Welding Materials for Chemical Analysis
Table WC-2432.2-1 Welding Material Chemical Analysis
190 WC-2440 Storage and Handling of Welding Material
WC-2500 Examination and Repair of Containment Material
WC-2510 Containment Material
Figure WC-2433.1-1 Weld Metal Delta Ferrite Content
191 WC-2530 Examination and Repair of Plate
192 WC-2540 Examination and Repair of Forgings and Bars
193 WC-2550 Examination and Repair of Seamless and Welded (Without Filler Metal) Tubular Products and Fittings
195 WC-2560 Examination and Repair of Tubular Products and Fittings Welded With Filler Metal
WC-2570 Examination and Repair of Cast Products
197 WC-2580 Examination of Bolts, Studs, and Nuts
WC-2600 Material Organizations’ Quality System Programs
WC-2610 Documentation and Maintenance of Quality System Programs
WC-2700 Dimensional Standards
198 Article WC-3000 Design
WC-3100 General Design
WC-3110 Loading Criteria
199 WC-3120 Special Considerations
WC-3130 General Design Rules
201 Table WC-3133.4-1 Values of Spherical Radius Factor, K1
202 WC-3200 Design Rules for Containments
WC-3210 General Requirements
204 Table WC-3217-1 Stress Intensity k Factors for Design and Operating Load Combinations
205 WC-3220 Design Consideration
207 Figure WC-3224.6-1 Design Curves for Torispherical Heads and 2:1 Ellipsoidal Heads for Use With WC-3224.8 and WC-3224.6
208 WC-3230 Openings and Reinforcement
209 Figure WC-3225-1 Typical Flat Heads
210 Figure WC-3225-2 Some Acceptable Types of Unstayed Flat Heads and Covers
211 Figure WC-3225-3 Attachment of Flat Heads to Containment Shell
212 Figure WC-3232.2-1 Chart for Determining the Value of F
213 WC-3250 Design of Welded Construction
Figure WC-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
214 Figure WC-3251-2 Typical Butt Joints
216 WC-3260 Special Containment Requirements
Figure WC-3261-1 Categories A and B Joints Between Sections of Unequal Thickness
Table WC-3262-1 Stress Reduction Factors and Examinations for Closure Welds
217 WC-3700 Strain-Based Acceptance Criteria
218 Article WC-4000 Fabrication
WC-4100 General Requirements
WC-4110 Introduction
WC-4120 Certification of Materials and Fabrication by Certificate Holder
219 WC-4130 Repair of Material
WC-4200 Forming, Cutting, and Aligning
WC-4210 Cutting, Forming, and Bending
220 WC-4220 Forming Tolerances
221 Figure WC-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
222 Figure WC-4221.2(a)-2 Maximum ARC Length for Determining Plus or Minus Deviation
223 WC-4230 Fitting and Aligning
Table WC-4232(a)-1 Maximum Allowable Offset in Final Welded Joints
224 WC-4260 Requirements for Weld Joints in Containments
Figure WC-4233-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
225 Figure WC-4265-1 Acceptable Full Penetration Weld Details for Category C Joints
226 WC-4300 Welding Qualifications
WC-4310 General Requirements
Figure WC-4265-2 Typical Partial Penetration Weld Detail for Category C Flat Head Closure Joints
227 WC-4320 Welding Qualifications, Records, and Identifying Stamps
Figure WC-4265-3 Typical Flat Heads With Hubs
228 Figure WC-4266(a)-1 Nozzles Attached by Full Penetration Butt Welds
230 WC-4330 General Requirements for Welding Procedure Qualification Tests
Figure WC-4266(c)-1 Deposited Weld Metal Used as Reinforcement of Openings for Nozzles
Figure WC-4266(d)-1 Fittings With Internal Threads
231 Figure WC-4266(e)-1 Partial Penetration Weld Connections
233 WC-4400 Rules Governing Making, Examining, and Repairing Welds
WC-4410 Precautions to Be Taken Before Welding
WC-4420 Rules for Making Welded Joints
234 WC-4430 Welding of Attachments
235 WC-4450 Repair of Weld Metal Defects
Figure WC-4427-1 Fillet Weld Details and Dimensions
236 Figure WC-4433-1 Typical Types of Attachment Welds
237 Figure WC-4433-2 Typical Attachments
238 WC-4500 Brazing
WC-4510 Rules for Brazing
WC-4511 Where Brazing May Be Used
WC-4512 Brazing Material
WC-4520 Brazing Qualification Requirements
WC-4521 Brazing Procedure and Performance Qualification
WC-4523 Reheated Joints
WC-4524 Maximum Temperature Limits
WC-4530 Fitting and Aligning of Parts to Be Brazed
WC-4540 Examination of Brazed Joints
WC-4600 Heat Treatment
WC-4610 Welding Preheat Requirements
WC-4611 When Preheat Is Necessary
WC-4612 Preheating Methods
239 WC-4613 Interpass Temperature
WC-4620 Postweld Heat Treatment
WC-4621 Heating and Cooling Methods
WC-4622 PWHT Time and Temperature Requirements
WC-4622.1 General Requirements.
WC-4622.2 Time–Temperature Recordings.
Table WC-4524-1 Maximum Design Temperatures for Brazing Filler Metal, °F (°C)
Table WC-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds
Table WC-4524-1 Maximum Design Temperatures for Brazing Filler Metal, °F (°C)
Table WC-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds
240 WC-4622.3 Definition of Nominal Thickness Governing PWHT.
WC-4622.4 Holding Times at Temperature.
WC-4622.5 PWHT Requirements When Different P‐Number Materials Are Joined.
WC-4622.6 PWHT Requirements for Noncontainment Parts.
WC-4622.7 Exemptions to Mandatory Requirements.
Table WC-4622.4(c)-1 Alternative Holding Temperatures and Times
Table WC-4622.4(c)-1 Alternative Holding Temperatures and Times
241 WC-4622.8 Requirements for Exempting PWHT of Nozzles to Containment Welds.
Table WC-4622.7(b)-1 Exemptions to Mandatory PWHT
Table WC-4622.7(b)-1 Exemptions to Mandatory PWHT
242 WC-4622.9 Weld Repair to Containments.
WC-4622.10 Temper Bead Technique.
243 WC-4622.11 Repair Welds to Cladding After Final Postweld Heat Treatment.
244 Figure WC-4622.10(c)(7)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
Figure WC-4622.10(c)(7)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
245 WC-4622.12 Temper Bead Weld Repair to Dissimilar Metal Welds or Buttering.
Figure WC-4622.10(c)(7)-2 Temper Bead Reinforcement
Figure WC-4622.10(c)(7)-2 Temper Bead Reinforcement
246 Figure WC-4622.10(f)-1 Qualification Test Plate
Figure WC-4622.10(f)-1 Qualification Test Plate
247 WC-4623 PWHT Heating and Cooling Rate Requirements
WC-4624 Methods of Postweld Heat Treatment
WC-4624.1 Furnace Heating — One Heat.
WC-4624.2 Furnace Heating — More Than One Heat.
248 Figure WC-4622.12(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
Figure WC-4622.12(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
249 WC-4624.3 Local Heating.
WC-4624.4 Heating Components Internally.
WC-4630 Heat Treatment of Welds Other Than the Final Postweld Heat Treatment
WC-4700 Mechanical Joints
WC-4710 Bolting and Threading
WC-4711 Thread Engagement
WC-4712 Thread Lubricants
WC-4713 Removal of Thread Lubricants
WC-4720 Bolting Flanged Joints
250 Article WC-5000 Examination
WC-5100 General Requirements for Examination
WC-5110 Procedures, Qualifications, and Evaluation
WC-5120 Time of Examination of Welds and Weld Metal Cladding
251 Table WC-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
252 WC-5130 Examination of Weld Edge Preparation Surfaces
WC-5140 Examination of Adjacent Base Material
WC-5200 Required Examination of Welds
WC-5210 Category A Longitudinal Welded Joints
WC-5220 Category B Circumferential Welded Joints
WC-5230 Category C Welded Joints
WC-5240 Category D Welded Joints
253 WC-5250 Examination of Containment Closure Welds
WC-5260 Fillet, Partial Penetration, and Attachment Welded Joints
WC-5270 Special Welds and Brazed Joints
254 WC-5300 Acceptance Standards
WC-5320 Radiographic Acceptance Standards
WC-5330 Ultrasonic Acceptance Standards
WC-5340 Magnetic Particle Acceptance Standards
255 WC-5350 Liquid Penetrant Acceptance Standards
WC-5360 Visual Acceptance Standards for Brazed Joints
WC-5400 Final Examination of Containments
WC-5410 Examination After Pressure Test
WC-5500 Qualifications and Certification of Nondestructive Examination Personnel
WC-5510 General Requirements
WC-5520 Personnel Qualification, Certification, and Verification
256 WC-5530 Records
257 Article WC-6000 Testing
WC-6100 General Requirements
WC-6110 Scope
WC-6120 Testing of Containments
WC-6130 Preparation for Testing
258 WC-6200 Hydrostatic Tests
WC-6210 Hydrostatic Test Procedure
WC-6220 Hydrostatic Test Pressure Requirements
WC-6300 Pneumatic Tests
WC-6310 Pneumatic Testing Procedures
259 WC-6320 Pneumatic Test Pressure Requirements
WC-6400 Test Gages
WC-6410  
WC-6600 Special Test Pressure Situations
WC-6610 Containments Designed for External Pressure
WC-6620 Pressure Testing of Combination Units
WC-6700 Leak Testing
WC-6710 Helium Leak Testing
260 WC-6720 Containment Closures
261 Article WC-8000 Nameplates, Stamping With Certification Mark, and Reports
WC-8100 General Requirements
262 Subsection WD Class ISS Internal Support Structures
Article WD-1000 Introduction
WD-1100 Scope and General Requirements
WD-1110 Scope
WD-1120 Limits of Rules for Class ISS Internal Support Structures
WD-1130 Boundaries of Jurisdiction
263 Figure WD-1131-1 Jurisdictional Boundary Between the Internal Support Structure and the Containment
264 Article WD-2000 Material
WD-2100 General Requirements for Material
WD-2110 Scope of Principal Terms Employed
WD-2120 Material for Internal Support Structures
265 WD-2130 Certification of Material
WD-2140 Welding Material
WD-2150 Material Identification
WD-2160 Deterioration of Material in Service
WD-2170 Heat Treatment to Enhance Impact Properties
WD-2180 Procedures for Heat Treatment of Material
WD-2190 Temporary Attachment Material
WD-2200 Material Test Coupons and Specimens for Ferritic Steel Material
WD-2210 Heat Treatment Requirements
266 WD-2220 Procedure for Obtaining Test Coupons and Specimens for Quenched and Tempered Material
267 WD-2300 Fracture Toughness Requirements for Material
WD-2310 Material to Be Impact Tested
268 WD-2320 Impact Test Procedures
WD-2330 Test Requirements and Acceptance Standards23
Table WD-2331(a)-1 Required Cv Values for Internal Support Structure Material With 2 in. (50 mm) Maximum Thickness (OtherThan Bolting)
269 WD-2340 Number of Impact Tests Required
Table WD-2333-1 Required Cv Values for Bolting Material
270 WD-2350 Retests
WD-2360 Calibration of Instruments and Equipment
WD-2400 Welding Material
WD-2410 General Requirements
WD-2420 Required Tests
271 WD-2430 Weld Metal Tests
273 Table WD-2432.1-1 Sampling of Welding Materials for Chemical Analysis
274 WD-2440 Storage and Handling of Welding Material
WD-2500 Examination and Repair of Internal Support Structure Material
WD-2510 Examination of Internal Support Structure Material
WD-2520 Examination After Quenching and Tempering
WD-2530 Examination and Repair of Plate
Table WD-2432.2-1 Welding Material Chemical Analysis
275 Figure WD-2433.1-1 Weld Metal Delta Ferrite Content
276 WD-2540 Examination and Repair of Forgings and Bars
277 WD-2550 Examination and Repair of Seamless and Welded Tubular Products and Fittings
279 WD-2580 Examination of Bolting
280 WD-2600 Material Organizations’ Quality System Programs
WD-2610 Documentation and Maintenance of Quality System Programs
281 Article WD-3000 Design
WD-3100 General Requirements for Design
WD-3110 Loading Criteria
282 WD-3120 Special Considerations
283 WD-3130 General Design Rules
WD-3200 Design Rules for Plate- and Shell-Type Internal Support Structures
WD-3210 General Requirements
286 WD-3220 Design by Analysis Requirements for Plate- and Shell-Type Internal Support Structure Members
287 Table WD-3217-1 Classification of Stress Intensities for Some Typical Cases
288 Figure WD-3221-1 Stress Categories and Limits of Stress Intensities for Design Loadings
289 Figure WD-3222-1 Stress Categories and Limits of Stress Intensities for Normal Loadings
293 Figure WD-3224-1 Stress Categories and Limits of Stress Intensities for Off-Normal Loadings
297 Table WD-3229.2-1 Values of K for Various Boundary Conditions and a/b Ratios
298 WD-3230 Design Requirements for Plate- and Shell-Type Internal Support Structure Bolted Joints
Table WD-3234-1 Stress Limit Factors for Bolt Design by Analysis
299 Table WD-3234.1(d)-1 Effective Slip Coefficient Versus Surface Condition
300 Table WD-3234.2-1 Maximum Sizes of Bolt Holes
Table WD-3234.3(a)-1 Minimum Edge Distances
301 WD-3240 Design Requirements for Plate- and Shell-Type Internal Support Structure Welded Joints
Table WD-3234.4-1 Increment C1 for Minimum Spacing Between Oversized and Slotted Holes
Table WD-3235.4-1 Classification of Loading Conditions
302 Table WD-3235.5-1 Stress Categories
Table WD-3235.6-1 Allowable Stress Ranges
303 Table WD-3240-1 Permissible Welded Joints and Design Factors
304 WD-3300 Design Rules for Linear-Type Internal Support Structures
WD-3310 General Requirements
305 Article WD-4000 Fabrication
WD-4100 General Requirements
WD-4110 Introduction
WD-4120 Certification of Material and Fabrication by Certificate Holder
WD-4130 Repair of Material
306 WD-4200 Forming, Fitting, and Aligning
WD-4210 Cutting, Forming, and Bending
307 WD-4230 Fitting and Aligning
308 WD-4300 Welding Qualifications
WD-4310 General Requirements
WD-4320 Welding Qualifications, Records, and Identifying Stamps
309 WD-4330 General Requirements for Welding Procedure Qualification Tests
311 WD-4400 Rules Governing Making, Examining, and Repairing Welds
WD-4410 Precautions to Be Taken Before Welding
312 WD-4420 Rules for Making Welded Joints
313 WD-4430 Welding of Attachments
Figure WD-4427-1 Fillet Weld Details and Dimensions
314 WD-4440 Special Requirements for Welding
WD-4450 Repair of Weld Metal Defects
Figure WD-4441-1 Weld Inlay and Overlay Specifications
315 WD-4500 Brazing
WD-4600 Heat Treatment
WD-4610 Welding Preheat and Interpass Requirements
WD-4620 Postweld Heat Treatment
316 Table WD-4622.1-1 Mandatory Requirements for Postweld Heat Treatment (PWHT) of Welds
317 Table WD-4622.4(c)-1 Alternative Holding Temperatures and Times
318 Table WD-4622.7(b)-1 Exemptions to Mandatory PWHT
319 WD-4630 Heat Treatment of Welds Other Than the Final Postweld Heat Treatment
WD-4650 Heat Treatment After Bending or Forming
WD-4700 Mechanical Joints
WD-4710 Bolting and Threading
WD-4720 Bolting
321 Article WD-5000 Examination
WD-5100 General Requirements for Examination
WD-5110 Procedures, Qualifications, and Evaluation
WD-5120 Time of Examination of Welds
WD-5130 Examination of Weld Edge Preparation Surfaces
322 WD-5140 Examination of Adjacent Base Material
Table WD-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
323 WD-5200 Required Examination of Welds
WD-5210 Permissible Examination Methods
WD-5220 Requirements for Radiography or Ultrasonic and Liquid Penetrant or Magnetic Particle Examination
WD-5230 Requirements for Liquid Penetrant or Magnetic Particle Examination
WD-5260 Requirements for Surface Visual Examination
WD-5270 Special Welded Joints
324 WD-5300 Acceptance Standards
WD-5320 Radiographic Acceptance Standards
WD-5330 Ultrasonic Acceptance Standards
WD-5340 Magnetic Particle Acceptance Standards
325 WD-5350 Liquid Penetrant Acceptance Standards
WD-5360 Visual Examination Acceptance Standards
WD-5500 Qualifications and Certification of Nondestructive Examination Personnel
WD-5510 General Requirements
WD-5520 Personnel Qualification, Certification, and Verification
326 WD-5530 Records
327 Article WD-8000 Nameplates, Stamping With Certification Mark, and Report
WD-8100 General Requirements
328 ENDNOTES

Related products

ASME BPVC III 3 2021
$290.00