ASME BPVC IV 2013

$377.00

ASME BPVC – IV -2013 BPVC Section IV, Rules for Construction of Heating Boilers

Published By	Publication Date	Number of Pages
ASME	2013	318

Guaranteed Safe Checkout

Category: ASME

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

PDF Catalog

PDF Pages	PDF Title
46	HG-307 Some Acceptable Types of Unstayed Flat Heads and Covers
50	HG-309 Spherically Dished Steel Plate Covers with Bolting Flanges
52	HG-312.4 Acceptable Type of Ring Reinforced Furnace
53	HG-312.7 Connection Between Plain and Corrugated Furnace
54	HG-312.8 Acceptable Type of Semicircular Furnace Reinforcement
56	HG-321 Chart for Determining Values of F HG-321 Values of Spherical Radius Factor K1
58	HG-326.1 Some Representative Configurations Describing the Reinforcement Dimension, te, and the Finished Opening Dimension, d
59	HG-326.2 Nomenclature and Formulas for Reinforced Openings
62	HG-340.1 Pitch of Staybolts Adjacent to Upper Corners of Fireboxes HG-340.2 Acceptable Proportions for Ends of Through‐Stays HG-340.3 Examples of Acceptable Corner Welds for Pressures Not Over 30 psi
63	HG-340 Allowable Pitch of Stays, in. (mm) (Limited by HG-340.3)
65	HG-343 Details of Installation of Diagonal Stays
66	HG-345.1(a) Sketch Showing Application of HG-345.1 to the Staying of Boilers
67	HG-345.1(b) Sketch Showing Application of HG-345.1 to the Staying of Boilers
68	HG-350.1 Example of Tube Spacing with Pitch of Holes Equal in Every Row
69	HG-350.2 Example of Tube Spacing with Pitch of Holes Unequal in Every Second Row HG-350.3 Example of Tube Spacing with Pitch of Holes Varying in Every Second and Third Row
70	HG-350.4 Example of Tube Spacing with Tube Holes on Diagonal Lines
71	HG-360 Permitted O‐Ring Materials HG-370 Minimum Thickness of Material for Threaded Connections to Boilers
72	HG-400.1 Minimum Pounds of Steam per Hour (kg/hr) per Square Foot (Meter) of Heating Surface
75	HG-402 Official Certification Mark to Denote the American Society of Mechanical Engineers’ Standard
85	HG-530.1 Official Certification Mark to Denote the American Society of Mechanical Engineers’ Standard HG-530.2 Steam and Water Boilers Form of Stamping on Completed Boilers or their Nameplates
86	HG-530.3 Boilers Suitable for Water Only HG-530.4 Steam and Water Boilers
87	HG-530.5 Boilers Suitable for Water Only HG-530.6 Boilers Suitable for Water Only
88	HG-530.7 Steam and Water Boilers HG-530.8 Boilers Suitable for Water Only
98	HG-703.1(a) Steam Boilers in Battery ‐ Pumped Return ‐ Acceptable Piping Installation
99	HG-703.1(b) Steam Boilers in Battery ‐ Gravity Return ‐ Acceptable Piping Installation
100	HG-703.2 Hot Water Boilers in Battery ‐ Acceptable Piping Installation
102	HG-709.2 Expansion Tank Capacities for Forced Hot Water Systems
103	HG-715 Size of Bottom Blowoff Piping, Valves, and Cocks
104	HG-725(a) Spacing and Weld Details for Supporting Lugs in Pairs on Horizontal‐Return Tubular Boiler
105	HG-725(b) Welded Bracket Connection for Horizontal‐Return Tubular Boiler
112	HF-300.1 Maximum Allowable Stress Values for Ferrous Materials, ksi
118	HF-300.1M Maximum Allowable Stress Values for Ferrous Materials, MPa
124	HF-300.2 Maximum Allowable Stress Values for Nonferrous Materials, ksi
129	HF-300.2M Maximum Allowable Stress Values for Nonferrous Materials, MPa
137	HW-701.1 Butt Welding of Plates of Unequal Thickness
139	HW-701.3 Some Forms of Attachments of Pressure Parts to Flat Plates to Form a Corner Joint (Tee Joint)
140	HW-710.4(a) Some Acceptable Types of Diagonal Stays for Installation by Welding HW-710.4(b) Unacceptable Types of Diagonal Stays for Installation by Welding
142	HW-715.1 Heads Attached to Shells HW-713 Firetube Extension Through Tubesheets for Welded Construction
144	HW-731 Some Acceptable Types of Welds for Fittings, Nozzles, and Other Connections to Shells, Drums, and Headers
147	HW-740 Three‐Ply Joint Assemblies
149	HW-745 Two‐Ply Joint Assemblies
159	HB-1305 Recommended Joint Clearances at Brazing Temperature
164	HC-205.1 Dimensions of Tensile Test Specimen HC-206.1 Cast Test Bars
166	HC-210 Correction Factors for Transverse Test Bars HC-213 Pipe Plug Size for Minimum Wall Thickness
167	HC-300 Maximum Allowable Stress Values in Tension for Cast Iron, ksi (MPa)
168	HC-311 Spherically Shaped Covers with Bolting Flanges
192	HLW-300 Maximum Allowable Stress Values in Tension for Lined Water Heater Materials, ksi (MPa)
194	HLW-301 Maximum Allowable Stress Values in Tension for Unlined Water Heater Materials ksi (MPa)
197	HLW-401.1 Butt Welding of Plates of Unequal Thickness
198	HLW-401.2 Typical Corner Joints
199	HLW-411 Typical Water Heater Welded Joints
201	HLW-413 Tubes Attached by Welding
203	HLW-415 Heads Attached to Shells
204	HLW-431.1 Some Acceptable Types of Welds for Fittings, Nozzles, and Other Connections to Shells and Head
206	HLW-431.5 Some Acceptable Types of Welds for Fittings, Nozzles, and Other Connections to Shells and Head
208	HLW-432.1 Some Acceptable Types of Brazed Fittings, Nozzles, and Other Connections to Copper‐Lined Shells and Heads
214	HLW-602.1 Official Symbol to Denote The American Society of Mechanical Engineers’ Standard HLW-602.2 Form of Stamping on Completed Water Heaters
218	HLW-809.1 Expansion Tank Capacities for a Water Heater
219	HLW-809.1 A Typical Acceptable Piping Installation for Storage Water Heaters in Battery
220	HLW-809.2 A Typical Acceptable Piping Installation for Flow Through Water Heater with Provisions for Piping Expansion
230	8-1 Certificate of Conformance for Reapplication of the Certification Mark
256	L-1 Guide for the Preparation of Section IV Manufacturer’s Data Report Forms
259	H-2 Manufacturer’s Data Report for all Types of Boilers Except Watertube and those Made of Cast Iron
261	H-3 Manufacturer’s Data Report for Watertube Boilers
263	H-4 Manufacturer’s Partial Data Report
265	H-5 Manufacturer’s Master Data Report for Boilers Constructed from Cast Iron
267	H-5A Manufacturer’s Master Data Report for Boilers Constructed from Cast Aluminum
269	H-6 Manufacturer’s Data Report Supplementary Sheet
270	HC-1 Manufacturer’s Material Certificate of Conformance for Cast Iron Boiler Sections
271	HC-2 Manufacturer’s Material Certificate of Conformance for Hydrostatic Testing of Cast Iron Boiler Sections
272	HA-1 Manufacturer’s Material Certificate of Conformance for Cast Aluminum Boiler Sections
273	HA-2 Manufacturer’s Material Certificate of Conformance for Hydrostatic Testing of Cast Aluminum Boiler Sections
274	HLW-6 Manufacturer’s Data Report for Water Heaters or Storage Tanks
276	HLW-7 Manufacturer’s Partial Data Report for Water Heaters and Storage Tanks
278	HLW-8 Manufacturer’s Master Data Proof Test Report for Water Heaters or Storage Tanks
284	HV-1 Manufacturer’s Certificate of Conformance for Pressure Relief Valves
307	INTERPRETATIONS Volume 62