ASME BPVC V 2019

$377.00

ASME BPVC – V -2019 BPVC Section V, Nondestructive Examination

Published By	Publication Date	Number of Pages
ASME	2019	991

Guaranteed Safe Checkout

Category: ASME

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

This Section contains requirements and methods for nondestructive examination which are referenced and required by other BPVC Sections. It also includes manufacturer’s examination responsibilities, duties of authorized inspectors and requirements for qualification of personnel, inspection and examination. Examination methods are intended to detect surface and internal discontinuities in materials, welds, and fabricated parts and components. A glossary of related terms is included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.

PDF Catalog

PDF Pages	PDF Title
5	Table of Contents
27	List of Sections
28	Interpretations Code Cases
29	Foreword
31	Statement of Policy on the Use of the ASME Single Certification Mark and Code Authorization in Advertising Statement of Policy on the Use of ASME Marking to Identify Manufactured Items
32	Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees 1 Introduction 2 Inquiry Format
33	3 Code Revisions or Additions 4 Code Cases 5 Code Interpretations
34	6 Submittals
35	Personnel
57	ASTM Personnel
58	Summary of Changes
63	List of Changes in Record Number Order
67	Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code Subparagraph Breakdowns/Nested Lists Hierarchy Footnotes Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees Cross-References
69	Subsection A Nondestructive Methods of Examination Article 1 General Requirements T-110 Scope T-120 General
70	T-130 Equipment T-150 Procedure
71	T-160 Calibration T-170 Examinations and Inspections T-180 Evaluation T-190 Records/Documentation
73	Mandatory Appendix I Glossary of Terms for Nondestructive Examination I-110 Scope I-120 General Requirements I-121 General Terms
92	I-130 UT — Ultrasonics
93	Mandatory Appendix II Supplemental Personnel Qualification Requirements for NDE Certification II-110 Scope II-120 General Requirements II-121 Level I and Level II Training and Experience Requirements II-122 Level I and Level II Examinations II-123 Level III Requirements II-124 Training Outlines
94	II-121-1 Initial Training and Experience Requirements for CR and DR Techniques
95	II-121-2 Additional Training and Experience Requirements for PAUT, TOFD, and FMC Ultrasonic Techniques II-122.1 Minimum CR and DR Examination Questions II-122.2 Minimum Ultrasonic Technique Examination Questions
96	Mandatory Appendix II Supplement A II-A-110 Training Outline for Level II Personnel
98	Mandatory Appendix III Exceptions and Additional Requirements for use of ASNT SNT-TC-1A 2016 Edition
103	Mandatory Appendix IV Exceptions to ASNT/ANSI CP-189 2016 Edition
105	Nonmandatory Appendix A Imperfection vs Type of NDE Method A-110 Scope A-110 Imperfection vs. Type of NDE Method
107	Article 2 Radiographic Examination T-210 Scope T-220 General Requirements T-221 Procedure Requirements T-222 Surface Preparation T-223 Backscatter Radiation T-224 System of Identification T-225 Monitoring Density Limitations of Radiographs T-226 Extent of Examination
108	T-230 Equipment and Materials T-231 Film T-232 Intensifying Screens T-233 Image Quality Indicator (IQI) Design T-233.1 Hole-Type IQI Designation, Thickness, and Hole Diameters T-233.2 Wire IQI Designation, Wire Diameter, and Wire Identity
109	T-234 Facilities for Viewing of Radiographs T-260 Calibration T-261 Source Size T-262 Densitometer and Step Wedge Comparison Film T-270 Examination T-271 Radiographic Technique
110	T-272 Radiation Energy T-273 Direction of Radiation T-274 Geometric Unsharpness T-275 Location Markers
111	T-275 Location Marker Sketches
112	T-276 IQI Selection T-277 Use of IQIs to Monitor Radiographic Examination
113	T-276 IQI Selection
114	T-280 Evaluation T-281 Quality of Radiographs T-282 Radiographic Density T-283 IQI Sensitivity
115	T-284 Excessive Backscatter T-285 Evaluation by Manufacturer T-290 Documentation T-291 Radiographic Technique Documentation Details T-292 Radiograph Review Form T-283 Equivalent Hole-Type IQI Sensitivity
116	Mandatory Appendix I In-Motion Radiography I-210 Scope I-220 General Requirements I-223 Backscatter Detection Symbol Location I-260 Calibration I-263 Beam Width I-270 Examination I-274 Geometric and In-Motion Unsharpness I-275 Location Markers I-277 Placement and Number of IQIs
117	I-279 Repaired Area I-263 Beam Width Determination
118	Mandatory Appendix II Real-Time Radioscopic Examination II-210 Scope II-220 General Requirements II-221 Procedure Requirements II-230 Equipment and Materials II-231 Radioscopic Examination Record II-235 Calibration Block II-236 Calibrated Line Pair Test Pattern and Step Wedge II-237 Equivalent Performance Level II-260 Calibration II-263 System Performance Measurement II-264 Measurement With a Calibration Block
119	II-270 Examination II-278 System Configuration II-280 Evaluation II-286 Factors Affecting System Performance II-290 Documentation II-291 Radioscopic Technique Information II-292 Evaluation by Manufacturer
120	Mandatory Appendix III Digital Image Acquisition, Display, and Storage for Radiography and Radioscopy III-210 Scope III-220 General Requirements III-221 Procedure Requirements III-222 Original Image Artifacts III-230 Equipment and Materials III-231 Digital Image Examination Record III-234 Viewing Considerations III-236 Calibrated Optical Line Pair Test Pattern and Optical Density Step Wedge III-250 Image Acquisition and Storage III-255 Area of Interest III-258 System Configuration III-260 Calibration III-263 System Performance Measurement III-280 Evaluation III-286 Factors Affecting System Performance
121	III-287 System-Induced Artifacts III-290 Documentation III-291 Digital Imaging Technique Information III-292 Evaluation by Manufacturer
122	Mandatory Appendix IV Interpretation, Evaluation, and Disposition of Radiographic and Radioscopic Examination Test Results Produced by the Digital Image Acquisition and Display Process IV-210 Scope IV-220 General Requirements IV-221 Procedure Requirements IV-222 Original Image Artifacts IV-230 Equipment and Materials IV-231 Digital Image Examination Record IV-234 Viewing Considerations IV-236 Calibrated Optical Line Pair Test Pattern and Optical Density Step Wedge
123	IV-250 Image Acquisition, Storage, and Interpretation IV-255 Area of Interest IV-258 System Configuration IV-260 Calibration IV-263 System Performance Measurement IV-280 Evaluation IV-286 Factors Affecting System Performance IV-287 System-Induced Artifacts IV-290 Documentation IV-291 Digital Imaging Technique Information IV-292 Evaluation by Manufacturer
124	Mandatory Appendix VI Acquisition, Display, Interpretation, and Storage of Digital Images of Radiographic Film for Nuclear Applications VI-210 Scope VI-220 General Requirements VI-221 Supplemental Requirements VI-222 Written Procedure VI-223 Personnel Requirements VI-230 Equipment and Materials VI-231 System Features VI-232 System Spot Size
125	VI-240 System Performance Requirements VI-241 Spatial Resolution VI-242 Contrast Sensitivity VI-243 Dynamic Range VI-244 Spatial Linearity VI-250 Technique VI-251 Spatial Resolution Evaluation VI-252 Contrast Sensitivity Evaluation VI-253 Dynamic Range Evaluation VI-254 Spatial Linearity Evaluation VI-260 Demonstration of System Performance VI-261 Procedure Demonstration VI-262 Processed Targets VI-263 Changes in Essential Variables VI-264 Frequency of Verification
126	VI-265 Changes in System Performance VI-270 Examination VI-271 System Performance Requirements VI-272 Artifacts VI-273 Calibration VI-280 Evaluation VI-281 Process Evaluation VI-282 Interpretation VI-283 Baseline VI-290 Documentation VI-291 Reporting Requirements VI-292 Archiving
127	Mandatory Appendix VI Supplement A VI-A-210 Scope VI-A-220 General VI-A-221 Reference Film VI-A-230 Equipment and Materials VI-A-231 Reference Targets VI-A-232 Spatial Resolution Targets VI-A-233 Constrast Sensitivity Targets VI-A-234 Dynamic Range Targets VI-A-235 Spatial Linearity Targets VI-A-240 Miscellaneous Requirements
128	VI-A-1 Reference Film
129	VI-A-241 Material VI-A-242 Film Size VI-A-243 Spatial Resolution VI-A-244 Density VI-A-245 Linearity
130	Mandatory Appendix VII Radiographic Examination of Metallic Castings VII-210 Scope VII-220 General Requirements VII-224 System of Identification VII-270 Examination VII-271 Radiographic Technique VII-276 IQI Selection VII-280 Evaluation VII-282 Radiographic Density VII-290 Documentation VII-293 Layout Details
131	Mandatory Appendix VIII Radiography Using Phosphor Imaging Plate VIII-210 Scope VIII-220 General Requirements VIII-221 Procedure Requirements VIII-225 Monitoring Density Limitations of Radiographs VIII-230 Equipment and Materials VIII-231 Phosphor Imaging Plate VIII-234 Facilities for Viewing of Radiographs VIII-260 Calibration VIII-262 Densitometer and Step Wedge Comparison Film VIII-270 Examination VIII-277 Use of IQIs to Monitor Radiographic Examination
132	VIII-280 Evaluation VIII-281 System-Induced Artifacts VIII-282 Image Brightness VIII-283 IQI Sensitivity VIII-284 Excessive Backscatter VIII-287 Dimensional Measuring VIII-288 Interpretation
133	VIII-290 Documentation VIII-291 Digital Imaging Technique Documentation Details
134	Mandatory Appendix VIII Supplement A VIII-A-210 Scope VIII-A-220 General VIII-A-221 Demonstration Block VIII-A-230 Equipment and Materials VIII-A-231 Scan Parameters VIII-A-232 Gray Scale Values VIII-A-233 Image Quality Indicators VIII-A-240 Miscellaneous Requirements VIII-A-241 Sensitivity VIII-A-242 Records
135	VIII-A-221-1 Procedure Demonstration Block
136	Mandatory Appendix IX Radiography Using Digital Detector Systems IX-210 Scope IX-220 General Requirements IX-221 Procedure Requirements IX-225 Monitoring Density Limitations of Radiographs IX-230 Equipment and Materials IX-231 Film IX-232 Intensifying Screens IX-234 Facilities for Viewing of Radiographs IX-260 Calibration IX-262 Densitometer and Step Wedge Comparison Film
137	IX-263 Beam Width IX-270 Examination IX-274 Geometric and In-Motion Unsharpness IX-263 Beam Width Determination
138	IX-275 Location Markers IX-277 Use of IQIs to Monitor Radiographic Examination IX-280 Evaluation IX-281 Quality of Digital Images IX-282 Image Brightness IX-283 IQI Sensitivity
139	IX-284 Excessive Backscatter IX-287 Dimensional Measuring IX-288 Interpretation IX-290 Documentation IX-291 Digital Imaging Technique Documentation Details
140	Mandatory Appendix IX Supplement A IX-A-210 Scope IX-A-220 General IX-A-221 Demonstration Block IX-A-230 Equipment and Materials IX-A-231 Acquisition Parameters IX-A-232 Gray Scale Values IX-A-233 Image Quality Indicators IX-A-240 Miscellaneous Requirements IX-A-241 Sensitivity IX-A-242 Records
141	Nonmandatory Appendix A Recommended Radiographic Technique Sketches for Pipe or Tube Welds A-210 Scope
142	A-210-1 Single-Wall Radiographic Techniques
143	A-210-2 Double-Wall Radiographic Techniques
144	Nonmandatory Appendix C Hole-Type IQI Placement Sketches for Welds C-210 Scope
145	C-210-1 Side and Top Views of Hole-Type IQI Placements
146	C-210-2 Side and Top Views of Hole-Type IQI Placements
147	C-210-3 Side and Top Views of Hole-Type IQI Placements
148	C-210-4 Side and Top Views of Hole-Type IQI Placements
149	Nonmandatory Appendix D Number of IQIs (Special Cases) D-210 Scope D-210-1 Complete Circumference Cylindrical Component D-210-2 Section of Circumference 240 deg or More Cylindrical Component (Example is Alternate Intervals) D-210-3 Section(s) of Circumference Less Than 240 deg Cylindrical Component
150	D-210-4 Section(s) of Circumference Equal to or More Than 120 deg and Less Than 240 deg Cylindrical Component Option D-210-5 Complete Circumferential Welds Spherical Component D-210-6 Welds in Segments of Spherical Component D-210-7 Plan View A-A
151	D-210-8 Array of Objects in a Circle
152	Article 4 Ultrasonic Examination Methods for Welds T-410 Scope T-420 General T-421 Written Procedure Requirements T-430 Equipment T-431 Instrument Requirements T-432 Search Units
153	T-421 Requirements of an Ultrasonic Examination Procedure
154	T-433 Couplant T-434 Calibration Blocks
155	T-434.1.7.2 Ratio Limits for Curved Surfaces
156	T-434.2.1 Nonpiping Calibration Blocks
157	T-434.3-1 Calibration Block for Piping
158	T-434.3-2 Alternate Calibration Block for Piping
159	T-434.4.1 Calibration Block for Technique One
160	T-434.4.2.1 Alternate Calibration Block for Technique One
161	T-434.4.2.2 Alternate Calibration Block for Technique One T-434.4.3 Calibration Block for Technique Two
162	T-434.5.1 Calibration Block for Straight Beam Examination of Nozzle Side Weld Fusion Zone and/or Adjacent Nozzle Parent Metal
163	T-440 Miscellaneous Requirements T-441 Identification of Weld Examination Areas T-450 Techniques T-451 Coarse Grain Materials T-452 Computerized Imaging Techniques T-453 Scanning Techniques T-460 Calibration T-461 Instrument Linearity Checks
164	T-462 General Calibration Requirements T-463 Calibration for Nonpiping
165	T-464 Calibration for Piping T-465 Calibration for Weld Metal Overlay Cladding T-466 Calibration for Nozzle Side Weld Fusion Zone and/or Adjacent Nozzle Parent Metal
166	T-467 Calibration Confirmation T-470 Examination T-471 General Examination Requirements
167	T-472 Weld Joint Distance–Amplitude Technique T-473 Weld Metal Overlay Cladding Techniques T-474 Nondistance–Amplitude Techniques
168	T-475 Nozzle Side Weld Fusion Zone and/or Adjacent Nozzle Parent Metal T-477 Post-Examination Cleaning T-480 Evaluation T-481 General T-482 Evaluation Level T-483 Evaluation of Laminar Reflectors T-484 Alternative Evaluations T-490 Documentation T-491 Recording Indications T-492 Examination Records
169	T-493 Report T-494 Storage Media
170	Mandatory Appendix I Screen Height Linearity I-410 Scope I-440 Miscellaneous Requirements I-440 Linearity
171	Mandatory Appendix II Amplitude Control Linearity II-410 Scope II-440 Miscellaneous Requirements
172	Mandatory Appendix III Time of Flight Diffraction (TOFD) Technique III-410 Scope III-420 General III-421 Written Procedure Requirements III-430 Equipment III-431 Instrument Requirements III-432 Search Units III-421 Requirements of a TOFD Examination Procedure
173	III-434 Calibration Blocks III-434.2.1(a) TOFD Reference Block
174	III-435 Mechanics III-460 Calibration III-463 Calibration III-464 Calibration for Piping III-465 Calibration for Cladding III-434.2.1(b) Two-Zone Reference Block Example
175	III-467 Encoder Confirmation III-470 Examination III-471 General Examination Requirements III-463.5 Offset Scans
176	III-472 Weld Joint Distance–Amplitude Technique III-473 Cladding Technique III-475 Data Sampling Spacing III-480 Evaluation III-485 Missing Data Lines III-486 Flaw Sizing and Interpretation III-490 Documentation III-492 Examination Record III-493 Report
177	Mandatory Appendix IV Phased Array Manual Raster Examination Techniques Using Linear Arrays IV-410 Scope IV-420 General IV-421 Written Procedure Requirements IV-422 Scan Plan IV-460 Calibration IV-461 Instrument Linearity Checks IV-462 General Calibration Requirements IV-490 Documentation IV-492 Examination Record
178	IV-421 Manual Linear Phased Array Raster Scanning Examination Procedure Requirements
179	Mandatory Appendix V Phased Array E-Scan and S-Scan Linear Scanning Examination Techniques V-410 Scope V-420 General V-421 Written Procedure Requirements V-422 Scan Plan V-460 Calibration V-461 Instrument Linearity Checks V-462 General Calibration Requirements V-467 Encoder Calibration V-470 Examination V-471 General Examination Requirements
180	V-421 Requirements of Phased Array Linear Scanning Examination Procedures
181	V-490 Documentation V-492 Examination Record
182	Mandatory Appendix VII Ultrasonic Examination Requirements for Workmanship-Based Acceptance Criteria VII-410 Scope VII-420 General VII-421 Written Procedure Requirements VII-423 Personnel Qualifications VII-430 Equipment VII-431 Instrument Requirements VII-434 Calibration Blocks VII-440 Miscellaneous Requirements VII-442 Scanning Data VII-421 Requirements of an Ultrasonic Examination Procedure for Workmanship-Based Acceptance Criteria
183	VII-460 Calibration VII-466 Calibration for Nozzle Side Weld Fusion Zone and/or Adjacent Nozzle Parent Metal VII-470 Examination VII-471 General Examination Requirements VII-480 Evaluation VII-483 Evaluation of Laminar Reflectors VII-485 Evaluation VII-486 Supplemental Manual Techniques VII-487 Evaluation by Manufacturer VII-490 Documentation VII-492 Examination Record
184	Mandatory Appendix VIII Ultrasonic Examination Requirements for Fracture-Mechanics-Based Acceptance Criteria VIII-410 Scope VIII-420 General VIII-421 Written Procedure Requirements VIII-423 Personnel Qualifications VIII-430 Equipment VIII-431 Instrument Requirements VIII-432 Search Units VIII-434 Calibration Blocks VIII-421 Requirements of an Ultrasonic Examination Procedure for Fracture-Mechanics-Based Acceptance Criteria
185	VIII-440 Miscellaneous Requirements VIII-442 Scanning Data VIII-460 Calibration VIII-467 Calibration for Nozzle Side Weld Fusion Zone and/or Adjacent Nozzle Parent Metal VIII-470 Examination VIII-471 General Examination Requirements VIII-480 Evaluation VIII-482 Evaluation Level VIII-483 Evaluation of Laminar Reflectors VIII-485 Evaluation Settings VIII-486 Size and Category VIII-487 Supplemental Manual Techniques
186	VIII-488 Evaluation by Manufacturer VIII-490 Documentation VIII-492 Examination Records
187	Mandatory Appendix IX Procedure Qualification Requirements for Flaw Sizing and Categorization IX-410 Scope IX-420 General IX-430 Equipment IX-435 Demonstration Blocks IX-440 Miscellaneous Requirements IX-442 Qualification Data
188	IX-480 Evaluation IX-481 Size and Category IX-482 Automated and Semiautomated Acceptable Performance Criteria IX-483 Supplemental Manual Technique(s) Acceptable Performance IX-490 Documentation IX-492 Demonstration Block Record
189	Mandatory Appendix X Ultrasonic Examination of High Density Polyethylene X-410 Scope X-420 General X-421 Written Procedure Requirements X-422 Scan Plan X-430 Equipment X-431 Instrument Requirements X-432 Search Units X-421 Requirements of an Ultrasonic Examination Procedure for HDPE Techniques
190	X-434 Calibration Blocks X-460 Calibration X-462 General Calibration Requirements X-464 Calibration for Piping X-467 Calibration Confirmation
191	X-470 Examination X-471 General Examination Requirements X-490 Documentation X-492 Examination Record X-471.1 Fusion Pipe Joint Examination Volume
192	Mandatory Appendix XI Full Matrix Capture XI-410 Scope XI-420 General XI-421 Written Procedure Requirements XI-422 Scan Plan XI-423 Personnel Qualifications XI-430 Equipment XI-432 Search Unit(s) XI-434 Calibration Blocks
193	XI-435 Reference Standards XI-450 Techniques XI-451 Data Reconstruction Techniques XI-460 Calibration XI-461 Amplitude Fidelity XI-462 General Calibration Requirements XI-421.1-1 Requirements of an FMC Examination Procedure
194	XI-434.1-1 Calibration Block
195	XI-464 XI-467 Encoder Calibration
196	XI-470 Examination XI-471 General Examination Requirements XI-474 XI-480 Evaluation XI-481 General Evaluation Requirements XI-482 Evaluation Level XI-483 Evaluation of Laminar Reflectors XI-485 Evaluation Settings XI-486 Size and Category
197	XI-488 Evaluation by Manufacturer XI-490 Documentation XI-492 Examination Records XI-494 Data Storage
198	Nonmandatory Appendix A Layout of Vessel Reference Points A-410 Scope A-440 Miscellaneous Requirements A-441 Circumferential (Girth) Welds A-442 Longitudinal Welds A-443 Nozzle-to-Vessel Welds
199	Nonmandatory Appendix B General Techniques for Angle Beam Calibrations B-410 Scope B-460 Calibration B-461 Sweep Range Calibration B-461.1 Sweep Range (Side-Drilled Holes)
200	B-461.2 Sweep Range (IIW Block) B-461.3 Sweep Range (Notches)
201	B-462 Distance–Amplitude Correction B-462.1 Sensitivity and Distance–Amplitude Correction (Side-Drilled Holes)
202	B-463 Distance–Amplitude Correction Inner 1/4 Volume (See Nonmandatory Appendix J, Figure J-431 View A) B-464 Position Calibration (See Figure B-464) B-462.3 Sensitivity and Distance–Amplitude Correction (Notches)
203	B-465 Calibration Correction for Planar Reflectors Perpendicular to the Examination Surface at or Near the Opposite Surface (See Figure B-465) B-466 Beam Spread (See Figure B-466) B-464 Position Depth and Beam Path B-465 Planar Reflections
204	B-466 Beam Spread
205	Nonmandatory Appendix C General Techniques for Straight Beam Calibrations C-410 Scope C-460 Calibration C-461 Sweep Range Calibration (See Figure C-461) C-462 Distance–Amplitude Correction (See Figure C-462) C-461 Sweep Range
206	C-462 Sensitivity and Distance–Amplitude Correction
207	Nonmandatory Appendix D Examples of Recording Angle Beam Examination Data D-410 Scope D-420 General D-470 Examination Requirements D-471 Reflectors With Indication Amplitudes Greater Than 20% of DAC or Reference Level D-472 Reflectors With Indication Amplitudes Greater Than the DAC Curve or Reference Level D-473 Flaw Sizing Techniques to Be Qualified and Demonstrated D-490 Documentation
208	D-491 Reflectors With Indication Amplitudes Greater Than 20% of DAC or Reference Level D-490 Search Unit Location, Position, and Beam Direction D-490 Example Data Record
209	D-492 Reflectors With Indication Amplitudes Greater Than the DAC Curve or Reference Level D-493 Reflectors That Require Measurement Techniques to Be Qualified and Demonstrated
210	Nonmandatory Appendix E Computerized Imaging Techniques E-410 Scope E-420 General E-460 Calibration E-470 Examination E-471 Synthetic Aperture Focusing Technique for Ultrasonic Testing (SAFT-UT)
211	E-472 Line-Synthetic Aperture Focusing Technique (L-SAFT) E-473 Broadband Holography Technique
212	E-460.1 Lateral Resolution and Depth Discrimination Block for 45 deg and 60 deg Applications
213	E-474 UT-Phased Array Technique
214	E-460.2 Lateral and Depth Resolution Block for 0 deg Applications
215	E-475 UT-Amplitude Time-of-Flight Locus-Curve Analysis Technique E-476 Automated Data Acquisition and Imaging Technique
216	Nonmandatory Appendix F Examination of Welds Using Full Matrix Capture F-410 Scope F-420 General F-421 Post-Processing F-430 Equipment F-432 Search Unit Selection
217	F-440 Miscellaneous F-441 Full Matrix Capture F-442 Total Focusing Method F-450 Techniques F-451 Conventional Phased-Array vs. FMC/TFM F-441-1 An Illustrated Elementary Transmit/Receive Matrix
218	F-460 Calibration F-461 Amplitude Fidelity F-451.1-1 FMC/TFM Generic Workflow
219	F-451.1-2 Active Focusing Workflow F-451.1-3 Active Focusing Workflow With FMC Data Acquisition
220	F-470 Examination F-471 Ultrasonic Paths/Modes F-451.1-4 Example of an Iterative FMC/TFM Workflow as an Adaptation of That Shown in Figure F-451.1-1
221	F-471-1 Ultrasonic Imaging Paths/Modes
222	F-471-1 Examples of Ultrasonic Imaging Modes
223	F-472 Selection of the Path(s)/Mode(s) F-473 Defect Orientation and Sensitivity F-480 Evaluation F-481 Detection
224	Nonmandatory Appendix G Alternate Calibration Block Configuration G-410 Scope G-460 Calibration G-461 Determination of Gain Correction G-461 Transducer Factor, F1, for Various Ultrasonic Transducer Diameters and Frequencies
225	G-461(a) Critical Radius, RC, for Transducer/Couplant Combinations
226	G-461(b) Correction Factor (Gain) for Various Ultrasonic Examination Parameters
227	Nonmandatory Appendix I Examination of Welds Using Angle Beam Search Units I-410 Scope I-470 Examination I-471 General Scanning Requirements I-472 Exceptions To General Scanning Requirements I-473 Examination Coverage
228	Nonmandatory Appendix J Alternative Basic Calibration Block J-410 Scope J-430 Equipment J-431 Basic Calibration Block J-432 Basic Calibration Block Material J-433 Calibration Reflectors
229	J-431 Basic Calibration Block
231	Nonmandatory Appendix K Recording Straight Beam Examination Data for Planar Reflectors K-410 Scope K-470 Examination K-471 Overlap K-490 Records/Documentation
232	Nonmandatory Appendix L TOFD Sizing Demonstration/Dual Probe — Computer Imaging Technique L-410 Scope L-420 General L-430 Equipment L-431 System L-432 Demonstration Block L-460 Calibration L-461 System L-462 System Checks L-470 Examination L-480 Evaluation L-481 Sizing Determinations
233	L-482 Sizing Accuracy Determinations L-483 Classification/Sizing System L-432 Example of a Flat Demonstration Block Containing Three Notches
234	L-490 Documentation L-491 Demonstration Report
235	Nonmandatory Appendix M General Techniques for Angle Beam Longitudinal Wave Calibrations M-410 Scope M-460 Calibration M-461 Sweep Range Calibration M-461.1 Sweep Range (Side-Drilled Holes)
236	M-461.2 Sweep Range (Cylindrical Surfaces) M-461.3 Sweep Range (Straight Beam Search Unit)
237	M-462 Distance–Amplitude Correction (DAC) (See Figure M-462) M-462 Sensitivity and Distance–Amplitude Correction
238	Nonmandatory Appendix N Time of Flight Diffraction (TOFD) Interpretation N-410 Scope N-420 General N-421 TOFD Images — Data Visualization N-421(a) Schematic Showing Waveform Transformation Into Grayscale
239	N-421(b) Schematic Showing Generation of Grayscale Image From Multiple A-Scans N-421(c) Schematic Showing Standard TOFD Setup and Display With Waveform and Signal Phases
240	N-450 Procedure N-451 Measurement Tools N-452 Flaw Position Errors N-421(d) TOFD Display With Flaws and Displayed A-Scan
241	N-453 Measuring Flaw Length N-454 Measuring Flaw Depth N-480 Evaluation N-481 Single Flaw Images N-451 Measurement Tools for Flaw Heights N-452(a) Schematic Showing the Detection of Off-Axis Flaws
242	N-452(b) Measurement Errors From Flaw Position Uncertainty N-453 TOFD Image Showing Hyperbolic “Tails” From the Ends of a Flaw Image Used to Measure Flaw Length
243	N-454(a) TOFD Image Showing Top and Bottom Diffracted Signals From Midwall Flaw and A-Scan Interpretation N-454(b) TOFD Image Showing Top and Bottom Diffracted Signals From Centerline Crack and A-Scan Interpretation
244	N-481(a) Schematics of Image Generation, Scan Pattern, Waveform, and TOFD Display Showing the Image of the Point Flaw
245	N-481(b) Schematics of Image Generation, Flaw Location, and TOFD Display Showing the Image of the Inside (ID) Surface-Breaking Flaw N-481(c) Schematics of Image Generation, Flaw Location, and TOFD Display Showing the Image of the Outside (OD) Surface-Breaking Flaw
246	N-481(d) Schematics of Flaw Location, Signals, and TOFD Display Showing the Image of the Midwall Flaw N-481(e) Flaw Location and TOFD Display Showing the Image of the Lack of Root Penetration
247	N-481(f) Flaw Location and TOFD Display Showing the Image of the Concave Root Flaw N-481(g) Flaw Location, TOFD Display Showing the Image of the Midwall Lack of Fusion Flaw, and the A-Scan
248	N-481(h) Flaw Location and TOFD Display Showing the Image of the Porosity N-481(i) Flaw Location and TOFD Display Showing the Image of the Transverse Crack
249	N-482 Multiple Flaw Images N-481(j) Schematics of Image Generation, Flaw Location, and TOFD Display Showing the Image of the Interpass Lack of Fusion
250	N-482(a) Schematic of Flaw Locations and TOFD Image Showing the Lateral Wave, Backwall, and Three of the Four Flaws
251	N-483 Typical Problems With TOFD Interpretation N-482(b) Schematic of Flaw Locations and TOFD Display Showing the Lateral Wave, Backwall, and Four Flaws
252	N-483(a) Acceptable Noise Levels, Flaws, Lateral Wave, and Longitudinal Wave Backwall
253	N-483(b) TOFD Image With Gain Too Low
254	N-483(c) TOFD Image With Gain Set Too High N-483(d)(1) TOFD Image With the Gate Set Too Early
255	N-483(d)(2) TOFD Image With the Gate Set Too Late N-483(d)(3) TOFD Image With the Gate Set Too Long
256	N-483(e) TOFD Image With Transducers Set Too Far Apart N-483(f) TOFD Image With Transducers Set Too Close Together
257	N-483(g) TOFD Image With Transducers Not Centered on the Weld Axis N-483(h) TOFD Image Showing Electrical Noise Interference
258	Nonmandatory Appendix O Time of Flight Diffraction (TOFD) Technique — General Examination Configurations O-410 Scope O-430 Equipment O-432 Search Units O-470 Examination O-432(a) Search Unit Parameters for Single Zone Examinations Up to 3 in. (75 mm) O-432(b) Search Unit Parameters for Multiple Zone Examinations Up to 12 in. (300 mm) Thick O-470 Recommended TOFD Zones for Butt Welds Up to 12 in. (300 mm) Thick
259	O-470(a) Example of a Single Zone TOFD Setup O-470(b) Example of a Two Zone TOFD Setup (Equal Zone Heights) O-470(c) Example of a Three Zone TOFD Setup (Unequal Zone Heights With Zone 3 Addressed by Two Offset Scans)
260	O-470(d) Example of a Four Zone TOFD Setup (Equal Zone Heights)
261	Nonmandatory Appendix P Phased Array (PAUT) Interpretation P-410 Scope P-420 General P-421 PAUT Images — Data Visualization P-450 Procedure P-451 Measurement Tools P-452 Flaw Sizing Techniques P-480 Evaluation
262	P-481 I.D. (Inside Diameter) Connected Crack P-421-1 Black and White (B&W) Version of Color Palette
263	P-421-2 Scan Pattern Format
264	P-421-3 Example of an E-Scan Image Display
265	P-421-4 Example of an S-Scan Image Display P-452.1 Flaw Length Sizing Using Amplitude Drop Technique and the Vertical Cursors on the C-Scan Display
266	P-452.2-1 Scan Showing Flaw Height Sizing Using Amplitude Drop Technique and the Horizontal Cursors on the B-Scan Display P-452.2-2 Flaw Height Sizing Using Top Diffraction Technique and the Horizontal Cursors on the S-Scan Display
267	P-481 S-Scan of I.D. Connected Crack P-481.1 E-Scan of LOF in Midwall
268	P-481.2 S-Scan of Porosity, Showing Multiple Reflectors P-481.3 O.D. Toe Crack Detected Using S-Scan
269	P-481.4 IP Signal on S-Scan, Positioned on Root P-481.5 Slag Displayed as a Midwall Defect on S-Scan
270	Nonmandatory Appendix Q Example of a Split DAC Curve Q-410 Scope Q-420 General Q-421 First DAC Q-422 Second DAC Q-423 Notch Reflectors Q-410 Distance–Amplitude Correction
271	Q-421 First DAC Curve Q-422 Second DAC Curve
272	Nonmandatory Appendix R Straight Beam Calibration Blocks for Restricted Access Weld Examinations R-410 Scope R-420 General R-430 Equipment R-434 Calibration Blocks
273	R-434-1 Corner Weld Example
274	R-434-2 Tee Weld Example
275	Article 5 Ultrasonic Examination Methods for Materials T-510 Scope T-520 General T-521 Basic Requirements T-522 Written Procedure Requirements T-530 Equipment T-531 Instrument T-532 Search Units T-533 Couplant T-534 Calibration Block Requirements
276	T-560 Calibration T-561 Instrument Linearity Checks T-562 General Calibration Requirements T-522 Variables of an Ultrasonic Examination Procedure
277	T-534.3 Straight Beam Calibration Blocks for Bolting
278	T-563 Calibration Confirmation T-564 Casting Calibration for Supplementary Angle Beam Examinations T-570 Examination T-571 Examination of Product Forms
279	T-572 Examination of Pumps and Valves T-573 Inservice Examination T-574 Thickness Measurement T-577 Post-Examination Cleaning T-580 Evaluation T-590 Documentation T-591 Recording Indications T-592 Examination Records
280	T-593 Report T-594 Storage Media
281	Mandatory Appendix I Ultrasonic Examination of Pumps and Valves I-510 Scope I-530 Equipment I-531 Calibration Blocks I-560 Calibration I-561 System Calibration I-570 Examination
282	Mandatory Appendix II Inservice Examination of Nozzle Inside Corner Radius and Inner Corner Regions II-510 Scope II-530 Equipment II-531 Calibration Blocks II-560 Calibration II-561 System Calibration II-570 Examination
283	Mandatory Appendix IV Inservice Examination of Bolts IV-510 Scope IV-530 Equipment IV-531 Calibration Blocks IV-560 Calibration IV-561 DAC Calibration IV-570 Examination IV-571 General Examination Requirements
284	Article 6 Liquid Penetrant Examination T-610 Scope T-620 General T-621 Written Procedure Requirements T-630 Equipment T-640 Miscellaneous Requirements T-641 Control of Contaminants T-642 Surface Preparation
285	T-643 Drying After Preparation T-650 Technique T-651 Techniques T-621.1 Requirements of a Liquid Penetrant Examination Procedure T-621.3 Minimum and Maximum Time Limits for Steps in Penetrant Examination Procedures
286	T-652 Techniques for Standard Temperatures T-653 Techniques for Nonstandard Temperatures T-654 Technique Restrictions T-660 Calibration T-670 Examination T-671 Penetrant Application T-672 Penetration (Dwell) Time T-673 Excess Penetrant Removal
287	T-674 Drying After Excess Penetrant Removal T-675 Developing T-672 Minimum Dwell Times
288	T-676 Interpretation T-677 Post-Examination Cleaning T-680 Evaluation T-690 Documentation T-691 Recording of Indications T-692 Examination Records
289	Mandatory Appendix II Control of Contaminants for Liquid Penetrant Examination II-610 Scope II-640 Requirements II-641 Nickel Base Alloys II-642 Austenitic or Duplex Stainless Steel and Titanium II-643 Water II-690 Documentation
290	Mandatory Appendix III Qualification Techniques for Examinations at Nonstandard Temperatures III-610 Scope III-630 Materials III-640 Requirements III-641 Comparator Application III-630 Liquid Penetrant Comparator
292	Article 7 Magnetic Particle Examination T-710 Scope T-720 General T-721 Written Procedure Requirements T-730 Equipment T-731 Examination Medium
293	T-740 Miscellaneous Requirements T-741 Surface Conditioning T-750 Technique T-751 Techniques T-752 Prod Technique T-721 Requirements of a Magnetic Particle Examination Procedure
294	T-753 Longitudinal Magnetization Technique T-754 Circular Magnetization Technique
295	T-755 Yoke Technique T-756 Multidirectional Magnetization Technique T-754.2.1 Single-Pass and Two-Pass Central Conductor Technique T-754.2.2 The Effective Region of Examination When Using an Offset Central Conductor
296	T-760 Calibration T-761 Frequency of Calibration T-762 Lifting Power of Yokes T-763 Gaussmeters T-764 Magnetic Field Adequacy and Direction
297	T-765 Wet Particle Concentration and Contamination T-764.2(a) Pie-Shaped Magnetic Particle Field Indicator T-764.2(b)(1) Artificial Flaw Shims
298	T-764.2(b)(2) Artificial Flaw Shims
299	T-766 System Performance of Horizontal Units T-770 Examination T-771 Preliminary Examination T-772 Direction of Magnetization T-773 Method of Examination
300	T-766.1 Ketos (Betz) Test Ring
301	T-774 Examination Coverage T-775 Rectified Current T-776 Excess Particle Removal T-777 Interpretation
302	T-778 Demagnetization T-779 Post-Examination Cleaning T-780 Evaluation T-790 Documentation T-791 Multidirectional Magnetization Technique Sketch T-792 Recording of Indications T-793 Examination Records
303	Mandatory Appendix I Magnetic Particle Examination Using the AC Yoke Technique on Ferromagnetic Materials Coated With Nonferromagnetic Coatings I-710 Scope I-720 General I-721 Written Procedure Requirements I-722 Personnel Qualification I-721 Requirements of AC Yoke Technique on Coated Ferritic Component
304	I-723 Procedure/Technique Demonstration I-730 Equipment I-740 Miscellaneous Requirements I-741 Coating Thickness Measurement I-750 Technique I-751 Technique Qualification I-760 Calibration I-761 Yoke Maximum Lifting Force
305	I-762 Light Intensity Measurement I-770 Examination I-780 Evaluation I-790 Documentation I-791 Examination Record
306	Mandatory Appendix III Magnetic Particle Examination Using the Yoke Technique With Fluorescent Particles in an Undarkened Area III-710 Scope III-720 General III-721 Written Procedure Requirements III-723 Procedure Demonstration III-750 Technique III-751 Qualification Standard III-760 Calibration III-761 Black Light Intensity Measurement III-762 White Light Intensity Measurement III-770 Examination III-721 Requirements for an AC or HWDC Yoke Technique With Fluorescent Particles in an Undarkened Area
307	III-777 Interpretation III-790 Documentation III-791 Examination Record
308	Mandatory Appendix IV Qualification of Alternate Wavelength Light Sources for Excitation of Fluorescent Particles IV-710 Scope IV-720 General IV-721 Written Procedure Requirements IV-723 Procedure Demonstration IV-750 Technique IV-751 Qualification Standard IV-752 Filter Glasses IV-770 Qualification Examinations IV-771 Black Light Intensity IV-772 Examination Requirements IV-721 Requirements for Qualifying Alternate Wavelength Light Sources for Excitation of Specific Fluorescent Particles
309	IV-773 Qualification of Alternate Wavelength Light Source and Specific Particles IV-790 Documentation IV-791 Examination Record
310	Mandatory Appendix V Requirements for the Use of Magnetic Rubber Techniques V-710 Scope V-720 General Requirements V-721 Written Procedure Requirements V-730 Equipment V-731 Magnetizing Apparatus V-732 Magnetic Rubber Materials V-733 Magnetic Field Strength V-734 Magnification V-740 Miscellaneous Requirements V-741 Surface Preparation
311	V-742 Taping and Damming V-743 Release Treatment V-750 Techniques V-751 Techniques V-752 Application of Magnetic Field V-721 Requirements for the Magnetic Rubber Examination Procedure
312	V-760 Calibration V-764 Magnetic Field Adequacy and Direction V-770 Examination V-773 Application of Liquid Polymer- Magnetic Particle Material V-774 Movement During Cure V-776 Removal of Replicas V-780 Evaluation V-790 Documentation V-793 Examination Records
313	Nonmandatory Appendix A Measurement of Tangential Field Strength With Gaussmeters A-710 Scope A-720 General Requirements A-730 Equipment A-750 Procedure A-790 Documentation/Records
314	Article 8 Eddy Current Examination T-810 Scope
315	Mandatory Appendix II Eddy Current Examination of Nonferromagnetic Heat Exchanger Tubing II-810 Scope II-820 General II-821 Written Procedure Requirements II-822 Personnel Requirements II-830 Equipment II-831 Data Acquisition System II-832 Analog Data Acquisition System
316	II-833 Digital Data Acquisition System II-834 Bobbin Coils II-821 Requirements for an Eddy Current Examination Procedure
317	II-835 Data Analysis System II-836 Analog Data Analysis System II-837 Digital Data Analysis System II-838 Hybrid Data Analysis System II-840 Requirements II-841 Recording and Sensitivity Level II-842 Probe Traverse Speed II-843 Fixture Location Verification II-844 Automated Data Screening System II-860 Calibration II-861 Equipment Calibration
318	II-862 Calibration Reference Standards II-863 Analog System Setup and Adjustment
319	II-864 Digital System Off-Line Calibration II-870 Examination II-880 Evaluation II-881 Data Evaluation II-882 Means of Determining Indication Depth II-863.1 Differential Technique Response From Calibration Reference Standard II-863.2 Absolute Technique Response From Calibration Reference Standard
320	II-883 Frequencies Used for Data Evaluation II-890 Documentation II-891 Reporting II-892 Records II-880 Flaw Depth as a Function of Phase Angle at 400 kHz [Ni–Cr–Fe 0.050 in. (1.24 mm) Wall Tube]
322	Mandatory Appendix III Eddy Current Examination on Coated Ferromagnetic Materials III-810 Scope III-820 General III-821 Personnel Qualification III-822 Written Procedure Requirements III-823 Procedure Demonstration III-830 Equipment III-850 Technique III-860 Calibration
323	III-870 Examination III-890 Documentation III-891 Examination Report III-893 Record Retention
324	Mandatory Appendix IV External Coil Eddy Current Examination of Tubular Products IV-810 Scope IV-820 General IV-821 Performance IV-822 Personnel Qualification IV-823 Written Procedure Requirements IV-830 Equipment IV-831 Test Coils and Probes IV-823 Requirements of an External Coil Eddy Current Examination Procedure
325	IV-832 Scanners IV-833 Reference Specimen IV-850 Technique IV-860 Calibration IV-861 Performance Verification IV-862 Calibration of Equipment IV-870 Examination IV-880 Evaluation IV-890 Documentation IV-891 Examination Reports IV-893 Record Retention
326	Mandatory Appendix V Eddy Current Measurement of Nonconductive-Nonferromagnetic Coating Thickness on a Nonferromagnetic Metallic Material V-810 Scope V-820 General V-821 Written Procedure Requirements V-822 Personnel Qualification V-823 Procedure/Technique Demonstration V-830 Equipment V-821 Requirements of an Eddy Current Examination Procedure for the Measurement of Nonconductive-Nonferromagnetic Coating Thickness on a Metallic Material
327	V-831 Probes V-850 Technique V-860 Calibration V-870 Examination V-880 Evaluation V-890 Documentation V-891 Examination Report V-893 Record Retention
328	V-860 Typical Lift-off Calibration Curve for Coating Thickness Showing Thickness Calibration Points Along the Curve
329	Mandatory Appendix VI Eddy Current Detection and Measurement of Depth of Surface Discontinuities in Nonferromagnetic Metals With Surface Probes VI-810 Scope VI-820 General VI-821 Written Procedure Requirements VI-822 Personnel Qualification VI-823 Procedure/Technique Demonstration VI-821 Requirements of an Eddy Current Examination Procedure for the Detection and Measurement of Depth for Surface Discontinuities in Nonferromagnetic Metallic Materials
330	VI-830 Equipment VI-831 Probes VI-832 Reference Specimen VI-850 Technique VI-860 Calibration VI-870 Examination VI-880 Evaluation
331	VI-890 Documentation VI-891 Examination Report VI-893 Record Retention VI-832 Reference Specimen VI-850 Impedance Plane Representations of Indications From Figure VI-832
332	Mandatory Appendix VII Eddy Current Examination of Ferromagnetic and Nonferromagnetic Conductive Metals to Determine If Flaws Are Surface Connected VII-810 Scope VII-820 General VII-821 Performance VII-822 Personnel Qualification VII-823 Written Procedure Requirements VII-830 Equipment VII-831 System Description VII-832 Surface Probes VII-833 Cables VII-823 Requirements of an Eddy Current Surface Examination Procedure
333	VII-834 Instrumentation VII-835 Reference Specimen VII-850 Technique VII-860 Calibration VII-861 General VII-862 Calibration Response VII-870 Examination VII-880 Evaluation VII-890 Documentation VII-891 Examination Report
334	VII-892 Record Retention VII-835 Eddy Current Reference Specimen
335	VII-862 Impedance Plane Responses for Stainless Steel and Carbon Steel Reference Specimens
336	Mandatory Appendix VIII Alternative Technique for Eddy Current Examination of Nonferromagnetic Heat Exchanger Tubing, Excluding Nuclear Steam Generator Tubing VIII-810 Scope VIII-820 General VIII-821 Written Procedure Requirements VIII-830 Equipment VIII-831 Data Acquisition System VIII-832 Analog Data Acquisition System
337	VIII-833 Digital Data Acquisition System VIII-834 Bobbin Coils VIII-821 Requirements for an Eddy Current Examination Procedure
338	VIII-850 Technique VIII-851 Probe Data Acquisition Speed VIII-852 Recording VIII-853 Automated Data Screening System VIII-860 Calibration VIII-861 Equipment Calibration VIII-862 Calibration Reference Standards VIII-863 Base Frequency
339	VIII-864 Setup and Adjustment VIII-864.1 Differential Technique Response From Calibration Reference VIII-864.2 Absolute Technique From Calibration Reference Standard
340	VIII-870 Examination VIII-880 Evaluation VIII-881 Data Evaluation VIII-882 Means of Determining Indication Depth VIII-883 Frequencies Used for Data Evaluation VIII-890 Documentation VIII-891 Reporting VIII-892 Support Members VIII-893 Records
342	Mandatory Appendix IX Eddy Current Array Examination of Ferromagnetic and Nonferromagnetic Materials for the Detection of Surface-Breaking Flaws IX-810 Scope IX-820 General Requirements IX-821 ECA Technique IX-822 Written Procedure Requirements IX-823 Procedure Qualification IX-824 Personnel Qualification IX-821-1 ECA Technique Compared to Raster Scan
343	IX-825 Procedure Demonstration IX-830 Equipment IX-831 Digital Data Acquisition Equipment IX-832 Probes IX-832-1 Array Coil Sensitivity Variance IX-822-1 Written Procedure Requirements for an ECA Examination
344	IX-833 Reference Standard (See Figure IX-833-1) IX-840 Application Requirements IX-841 Scanning Speed IX-842 Coated Surfaces IX-843 Magnetic Permeability Variance IX-833-1 Example Reference Standard
345	IX-844 Automated Data Screening System IX-850 Technique IX-851 Frequency, Probe Drive, and Gain Selection IX-852 Channel Standardization IX-853 Color Palette Adjustment IX-860 Calibration IX-861 Equipment Calibration IX-862 System Calibration and Verification IX-870 Examination IX-871 Surface Condition IX-872 Scanning Method (See Figure IX-872-1) IX-873 Secondary Scanning IX-880 Evaluation IX-881 Relevant vs. Nonrelevant Indications IX-882 Length Sizing
346	IX-890 Documentation IX-891 Examination Report IX-892 Record Retention IX-872-1 Scanning Overlap
347	Mandatory Appendix X Eddy Current Array Examination of Ferromagnetic and Nonferromagnetic Welds for the Detection of Surface-Breaking Flaws X-810 Scope X-820 General Requirements X-821 ECA Technique X-822 Written Procedure Requirements X-823 Procedure Qualification X-824 Personnel Qualification X-825 Procedure Demonstration X-830 Equipment X-831 Digital Data Acquisition Equipment
348	X-832 Probes X-833 Reference Standard (See Figure X-833-1) X-822-1 Written Procedure Requirements for an ECA Examination
349	X-840 Application Requirements X-841 Scanning Speed X-842 Coated Surfaces X-843 Magnetic Permeability Variance X-844 Automated Data Screening System X-850 Technique X-851 Frequency, Probe Drive, and Gain Selection X-852 Channel Standardization X-853 Color Palette Adjustment X-860 Calibration X-861 Equipment Calibration X-833-1 Example Reference Standard
350	X-862 Calibration and Verification X-870 Examination X-871 Surface Condition X-872 Scanning Method (See Mandatory Appendix IX, Figure IX-872-1) X-873 Secondary Scanning X-880 Evaluation X-881 Relevant vs. Nonrelevant Indications X-882 Length Sizing X-890 Documentation X-891 Examination Report X-892 Record Retention
351	Article 9 Visual Examination T-910 Scope T-920 General T-921 Written Procedure Requirements T-922 Personnel Requirements T-923 Physical Requirements T-921 Requirements of a Visual Examination Procedure
352	T-930 Equipment T-950 Technique T-951 Applications T-952 Direct Visual Examination T-953 Remote Visual Examination T-954 Translucent Visual Examination T-955 Light Meter Calibration T-980 Evaluation T-990 Documentation T-991 Report of Examination T-993 Record Maintenance
353	Article 10 Leak Testing T-1010 Scope T-1020 General T-1021 Written Procedure Requirements T-1022 Referencing Code T-1030 Equipment T-1031 Gages
354	T-1040 Miscellaneous Requirements T-1041 Cleanliness T-1042 Openings T-1043 Temperature T-1044 Pressure/Vacuum (Pressure Limits) T-1050 Procedure T-1051 Preliminary Leak Test T-1052 Test Sequence T-1060 Calibration T-1061 Pressure/Vacuum Gages T-1062 Temperature Measuring Devices T-1063 Calibration Leak Standards
355	T-1070 Test T-1080 Evaluation T-1081 Acceptance Standards T-1090 Documentation T-1091 Test Report T-1092 Record Retention
356	Mandatory Appendix I Bubble Test — Direct Pressure Technique I-1010 Scope I-1020 General I-1021 Written Procedure Requirements I-1030 Equipment I-1031 Gases I-1032 Bubble Solution I-1033 Immersion Bath I-1070 Test I-1071 Soak Time I-1021 Requirements of a Direct Pressure Bubble Leak Testing Procedure
357	I-1072 Surface Temperature I-1073 Application of Solution I-1074 Immersion in Bath I-1075 Lighting and Visual Aids I-1076 Indication of Leakage I-1077 Posttest Cleaning I-1080 Evaluation I-1081 Leakage I-1082 Repair/Retest
358	Mandatory Appendix II Bubble Test — Vacuum Box Technique II-1010 Scope II-1020 General II-1021 Written Procedure Requirements II-1030 Equipment II-1031 Bubble Solution II-1032 Vacuum Box II-1021 Requirements of a Vacuum Box Leak Testing Procedure
359	II-1033 Vacuum Source II-1070 Test II-1071 Surface Temperature II-1072 Application of Solution II-1073 Vacuum Box Placement II-1074 Pressure (Vacuum) Retention II-1075 Vacuum Box Overlap II-1076 Lighting and Visual Aids II-1077 Indication of Leakage II-1078 Posttest Cleaning II-1080 Evaluation II-1081 Leakage II-1082 Repair/Retest
360	Mandatory Appendix III Halogen Diode Detector Probe Test III-1010 Introduction and Scope III-1011 Alkali-Ion Diode (Heated Anode) Halogen Leak Detectors III-1012 Electron Capture Halogen Leak Detectors III-1020 General III-1021 Written Procedure Requirements III-1030 Equipment III-1031 Tracer Gas III-1032 Instrument III-1033 Calibration Leak Standards III-1060 Calibration III-1061 Standard Leak Size
361	III-1062 Warm Up III-1063 Scanning Rate III-1064 Detection Time III-1065 Frequency and Sensitivity III-1070 Test III-1071 Location of Test III-1072 Concentration of Tracer Gas III-1073 Soak Time III-1021 Requirements of a Halogen Diode Detector Probe Testing Procedure III-1031 Tracer Gases
362	III-1074 Scanning Distance III-1075 Scanning Rate III-1076 Scanning Direction III-1077 Leakage Detection III-1078 Application III-1080 Evaluation III-1081 Leakage III-1082 Repair/Retest
363	Mandatory Appendix IV Helium Mass Spectrometer Test — Detector Probe Technique IV-1010 Scope IV-1020 General IV-1021 Written Procedure Requirements IV-1030 Equipment IV-1031 Instrument IV-1032 Auxiliary Equipment IV-1033 Calibration Leak Standards IV-1060 Calibration IV-1061 Instrument Calibration IV-1062 System Calibration
364	IV-1070 Test IV-1071 Location of Test IV-1072 Concentration of Tracer Gas IV-1073 Soak Time IV-1074 Scanning Distance IV-1075 Scanning Rate IV-1021 Requirements of a Helium Mass Spectrometer Detector Probe Testing Procedure
365	IV-1076 Scanning Direction IV-1077 Leakage Detection IV-1078 Application IV-1080 Evaluation IV-1081 Leakage IV-1082 Repair/Retest
366	Mandatory Appendix V Helium Mass Spectrometer Test — Tracer Probe Technique V-1010 Scope V-1020 General V-1021 Written Procedure Requirements V-1030 Equipment V-1031 Instrument V-1032 Auxiliary Equipment V-1033 System Calibration Leak Standard V-1060 Calibration V-1061 Instrument Calibration
367	V-1062 System Calibration V-1070 Test V-1071 Scanning Rate V-1072 Scanning Direction V-1073 Scanning Distance V-1074 Leakage Detection V-1075 Flow Rate V-1080 Evaluation V-1081 Leakage V-1021 Requirements of a Helium Mass Spectrometer Tracer Probe Testing Procedure
368	V-1082 Repair/Retest
369	Mandatory Appendix VI Pressure Change Test VI-1010 Scope VI-1020 General VI-1021 Written Procedure Requirements VI-1030 Equipment VI-1031 Pressure Measuring Instruments VI-1032 Temperature Measuring Instruments VI-1021 Requirements of a Pressure Change Testing Procedure
370	VI-1060 Calibration VI-1061 Pressure Measuring Instruments VI-1062 Temperature Measuring Instruments VI-1070 Test VI-1071 Pressure Application VI-1072 Vacuum Application VI-1073 Test Duration VI-1074 Small Pressurized Systems VI-1075 Large Pressurized Systems VI-1076 Start of Test VI-1077 Essential Variables VI-1080 Evaluation VI-1081 Acceptable Test VI-1082 Rejectable Test
371	Mandatory Appendix VIII Thermal Conductivity Detector Probe Test VIII-1010 Introduction and Scope VIII-1011 Thermal Conductivity Leak Detectors VIII-1020 General VIII-1021 Written Procedure Requirements VIII-1030 Equipment VIII-1031 Tracer Gas VIII-1032 Instrument VIII-1033 Calibration Leak Standard VIII-1060 Calibration VIII-1061 Standard Leak Size
372	VIII-1062 Warm Up VIII-1063 Scanning Rate VIII-1064 Detection Time VIII-1065 Frequency and Sensitivity VIII-1070 Test VIII-1071 Location of Test VIII-1072 Concentration of Tracer Gas VIII-1021 Requirements of a Thermal Conductivity Detector Probe Testing Procedure VIII-1031 Tracer Gases
373	VIII-1073 Soak Times VIII-1074 Scanning Distance VIII-1075 Scanning Rate VIII-1076 Scanning Direction VIII-1077 Leakage Detection VIII-1078 Application VIII-1080 Evaluation VIII-1081 Leakage VIII-1082 Repair/Retest
374	Mandatory Appendix IX Helium Mass Spectrometer Test — Hood Technique IX-1010 Scope IX-1020 General IX-1021 Written Procedure Requirements IX-1030 Equipment IX-1031 Instrument IX-1032 Auxiliary Equipment IX-1021 Requirements of a Helium Mass Spectrometer Hood Testing Procedure
375	IX-1033 System Calibration Leak Standard IX-1050 Technique IX-1051 Permeation IX-1052 Repetitive or Similar Tests IX-1053 Multiple-Mode Mass Spectrometer Leak Detectors IX-1060 Calibration IX-1061 Instrument Calibration
376	IX-1062 System Calibration IX-1070 Test IX-1071 Standard Technique
377	IX-1072 Alternative Technique IX-1080 Evaluation IX-1081 Leakage IX-1082 Repair/Retest
378	Mandatory Appendix X Ultrasonic Leak Detector Test X-1010 Introduction X-1020 General X-1021 Written Procedure Requirements X-1030 Equipment X-1031 Instrument X-1032 Capillary Calibration Leak Standard X-1021 Requirements of an Ultrasonic Leak Testing Procedure
379	X-1060 Calibration X-1061 Standard Leak Size X-1062 Warm Up X-1063 Scanning Rate X-1064 Frequency and Sensitivity X-1070 Test X-1071 Location of Test X-1072 Soak Time X-1073 Scanning Distance X-1074 Scanning Rate X-1075 Leakage Detection X-1080 Evaluation X-1081 Leakage X-1082 Repair/Retest
380	Mandatory Appendix XI Helium Mass Spectrometer — Helium-Filled-Container Leakage Rate Test XI-1010 Scope XI-1020 General XI-1021 Written Procedure Requirements XI-1030 Equipment XI-1031 Instrument XI-1032 Auxiliary Equipment XI-1033 System Calibration Leak Standard
381	XI-1050 Technique XI-1051 Helium Depletion XI-1052 Multiple-Mode Mass Spectrometer Leak Detectors XI-1053 Tracer Gas Supply in the Upstream Volume XI-1060 Calibration XI-1061 Instrument Calibration XI-1021.1-1 Requirements of a Helium Mass Spectrometer Sealed-Object Leakage Rate Test
382	XI-1062 Test Sequence and System Calibration — Standard Technique XI-1063 Test Sequence and System Calibration — Alternative Sequence for Small Upstream Volume
383	XI-1070 Calculation of Test Reliability and Corrected Leakage Rate XI-1071 Test Reliability XI-1072 Calculation and Report of Corrected Leakage Rates XI-1080 Evaluation XI-1081 Leakage XI-1082 Repair/Retest
384	Nonmandatory Appendix A Supplementary Leak Testing Equation Symbols A-1010 Applicability of the Formulas
385	Article 11 Acoustic Emission Examination of Fiber-Reinforced Plastic Vessels T-1110 Scope T-1120 General T-1121 Vessel Conditioning T-1122 Vessel Loading T-1121 Requirements for Reduced Operating Level Immediately Prior to Examination
386	T-1123 Vessel Support T-1124 Environmental Conditions T-1125 Noise Elimination T-1126 Instrumentation Settings T-1127 Sensors T-1128 Procedure Requirements T-1130 Equipment
387	T-1160 Calibration T-1161 System Calibration T-1162 Sensor Locations and Spacings T-1163 Systems Performance Check T-1170 Examination T-1171 General Guidelines T-1172 Background Noise
388	T-1173 Loading T-1174 AE Activity T-1175 Test Termination T-1180 Evaluation T-1181 Evaluation Criteria T-1182 Emissions During Load Hold, EH T-1183 Felicity Ratio Determination T-1184 High Amplitude Events Criterion T-1185 Total Counts Criterion T-1190 Documentation T-1191 Report
389	T-1192 Record
390	T-1173(a)(1) Atmospheric Vessels Loading Sequence
391	T-1173(a)(2) Vacuum Vessels Loading Sequence
392	T-1173(a)(3) Test Algorithm — Flowchart for Atmospheric Vessels
393	T-1173(b)(1) Pressure Vessel Loading Sequence
394	T-1173(b)(2) Algorithm — Flowchart for Pressure Vessels
395	T-1181 Evaluation Criteria
396	Mandatory Appendix I Instrumentation Performance Requirements I-1110 AE Sensors I-1111 High Frequency Sensors I-1112 Low Frequency Sensors I-1120 Signal Cable I-1130 Couplant I-1140 Preamplifier I-1150 Filters I-1160 Power-Signal Cable I-1161 Power Supply
397	I-1170 Main Amplifier I-1180 Main Processor I-1181 General I-1182 Peak Amplitude Detection I-1183 Signal Outputs and Recording
398	I-1183 Sample of Schematic of AE Instrumentation for Vessel Examination
399	Mandatory Appendix II Instrument Calibration II-1110 General II-1120 Threshold II-1130 Reference Amplitude Threshold II-1140 Count Criterion Nc and AM Value II-1160 Field Performance
400	Nonmandatory Appendix A Sensor Placement Guidelines A-1110 Case 1 — Atmospheric Vertical Vessel
401	A-1120 Case 2 — Atmospheric Vertical Vessel
402	A-1130 Case 3 — Atmospheric/Pressure Vessel
403	A-1140 Case 4 — Atmospheric/Pressure Vertical Vessel
404	A-1150 Case 5 — Atmospheric/Vacuum Vertical Vessel
405	A-1160 Case 6 — Atmospheric/Pressure Horizontal Tank
406	Article 12 Acoustic Emission Examination of Metallic Vessels During Pressure Testing T-1210 Scope T-1220 General T-1221 Vessel Stressing T-1222 Noise Reduction T-1223 Sensors T-1224 Location of Acoustic Emission Sources
407	T-1225 Procedure Requirements T-1230 Equipment T-1260 Calibration T-1261 System Calibration T-1262 On-Site System Calibration T-1263 Attenuation Characterization T-1264 Sensor Location T-1265 Sensor Spacing
408	T-1266 Systems Performance Check T-1270 Examination T-1271 General Guidelines T-1272 Background Noise T-1273 Vessel Pressurization
409	T-1280 Evaluation T-1281 Evaluation Criteria T-1290 Documentation T-1291 Written Report T-1292 Record
410	T-1273.2.1 An Example of Pressure Vessel Test Stressing Sequence
411	T-1273.2.2 An Example of In-Service, Pressure Vessel, Test Loading Sequence
412	T-1281 An Example of Evaluation Criteria for Zone Location
413	Mandatory Appendix I Instrumentation Performance Requirements I-1210 Acoustic Emission Sensors I-1211 General I-1212 Sensor Characteristics I-1220 Signal Cable I-1230 Couplant I-1240 Preamplifier I-1250 Filter I-1260 Power-Signal Cable I-1270 Power Supply I-1280 Main Amplifier I-1290 Main Processor I-1291 General
414	I-1292 Peak Amplitude Detection
415	Mandatory Appendix II Instrument Calibration and Cross-Referencing II-1210 Manufacturer’s Calibration II-1211 Annual Calibration II-1220 Instrument Cross-Referencing II-1221 Sensor Characterization
416	Nonmandatory Appendix A Sensor Placement Guidelines A-1210 Case 1 — Vertical Pressure Vessel Dished Heads, Lug or Leg Supported
417	A-1220 Case 2 — Vertical Pressure Vessel Dished Heads, Agitated, Baffled Lug, or Leg Support
418	A-1230 Case 3 — Horizontal Pressure Vessel Dished Heads, Saddle Supported
419	A-1240 Case 4 — Vertical Pressure Vessel Packed or Trayed Column Dished Heads, Lug or Skirt Supported
420	A-1250 Case 5 — Spherical Pressure Vessel, Leg Supported
421	Nonmandatory Appendix B Supplemental Information for Conducting Acoustic Emission Examinations B-1210 Frequency Selection B-1220 Combining More Than One Sensor in a Single Channel B-1230 Attenuative Welds B-1240 Production Line Testing of Identical Vessels
422	Article 13 Continuous Acoustic Emission Monitoring of Pressure Boundary Components T-1310 Scope T-1311 References T-1320 General T-1321 Relevant Indications T-1322 Personnel Qualification T-1323 Written Procedures
423	T-1330 Equipment T-1331 General T-1332 AE Sensors T-1331 Functional Flow Diagram — Continuous AE Monitoring System
424	T-1333 Signal Cables T-1334 Amplifiers T-1335 AE Instrument and Monitor T-1332.2 Response of a Waveguide AE Sensor Inductively Tuned to 500 kHz
425	T-1340 Miscellaneous Requirements T-1341 Equipment Verification T-1342 Sensor Calibration T-1343 Signal Pattern Recognition
426	T-1344 Material Attenuation/Characterization T-1345 Background Noise T-1346 Verification Records T-1347 Sensor Installation T-1348 Signal Lead Installation T-1349 AE Monitor Installation T-1350 Technique/Procedure Requirements
427	T-1351 AE System Operation T-1352 Data Processing, Interpretation, and Evaluation T-1353 Data Recording and Storage T-1354 Component Loading T-1355 Noise Interference T-1356 Coordination with Plant System Owner/Operator
428	T-1357 Source Location and Sensor Mounting T-1360 Calibration T-1361 Sensors T-1362 Complete AE Monitor System T-1363 Verification Intervals T-1364 Verification Records T-1370 Examination T-1371 Plant Startup and Shutdown T-1373 Plant Steady-State Operation
429	T-1374 Nuclear Metal Components T-1375 Non-Nuclear Metal Components T-1376 Nonmetallic Components T-1377 Limited Zone Monitoring T-1378 Hostile Environment Applications T-1379 Leak Detection Applications T-1380 Evaluation/Results T-1381 Data Processing, Interpretation, and Evaluation T-1382 Data Requirements T-1390 Reports/Records T-1391 Reports to Plant System Owner/Operator T-1392 Records
430	T-1393 Record Retention Requirements
431	Mandatory Appendix I Nuclear Components I-1310 Scope I-1330 Equipment I-1331 Preamplifiers I-1332 AE Sensors I-1333 Frequency Response I-1334 Signal Processing I-1340 Miscellaneous Requirements I-1341 Equipment Qualification I-1360 Calibration I-1361 Calibration Block I-1362 Calibration Interval I-1380 Evaluation
433	Mandatory Appendix II Non-Nuclear Metal Components II-1310 Scope II-1330 Equipment II-1331 Sensors II-1333 Amplifiers II-1334 Main Processor
434	II-1360 Calibration II-1361 System Performance Check II-1362 System Performance Check Verification II-1380 Evaluation II-1381 Evaluation Criteria — Zone Location II-1382 Evaluation Criteria — Multisource Location II-1381 An Example of Evaluation Criteria for Zone Location II-1382 An Example of Evaluation Criteria for Multisource Location
435	Mandatory Appendix III Nonmetallic Components III-1310 Scope III-1320 General III-1321 Applications III-1330 Equipment III-1331 Sensors III-1332 Source Location Accuracy III-1360 Calibration III-1361 Annual Field Calibration III-1362 Performance Verification III-1363 Low Amplitude Threshold III-1364 High Amplitude Threshold
436	III-1380 Evaluation III-1381 Evaluation Criteria III-1382 Source Mechanism
437	Mandatory Appendix IV Limited Zone Monitoring IV-1310 Scope IV-1320 General IV-1321 Guard Sensor Technique IV-1340 Miscellaneous Requirements IV-1341 Redundant Sensors IV-1350 Technique IV-1351 Techniques IV-1352 Procedure IV-1353 Other Techniques IV-1360 Calibration IV-1380 Evaluation
438	IV-1390 Documentation
439	Mandatory Appendix V Hostile Environment Applications V-1310 Scope V-1330 Equipment V-1331 AE Sensors V-1332 AE Sensor Types V-1333 Waveguide V-1334 AE Signal Transmission V-1340 Miscellaneous Requirements V-1341 Sensor Mounting
440	V-1333 Metal Waveguide AE Sensor Construction
441	V-1341 Mounting Fixture for Steel Waveguide AE Sensor
442	Mandatory Appendix VI Leak Detection Applications VI-1310 Scope VI-1320 General VI-1330 Equipment VI-1331 Sensor Type VI-1332 Waveguide
443	VI-1333 Electronic Filters VI-1350 Technique VI-1351 Procedure VI-1360 Calibration VI-1361 Calibration Checks VI-1370 Examination VI-1371 Implementation of System Requirements VI-1372 Verification Procedure VI-1373 Equipment Qualification and Calibration Data VI-1380 Evaluation VI-1381 Leak Indications VI-1382 Leak Location
444	Article 14 Examination System Qualification T-1410 Scope T-1420 General Requirements T-1421 The Qualification Process T-1422 Technical Justification T-1423 Performance Demonstration T-1424 Levels of Rigor
445	T-1425 Planning a Qualification Demonstration T-1430 Equipment T-1440 Application Requirements T-1441 Technical Justification Report
446	T-1442 Performance Demonstration
447	T-1443 Examination System Requalification T-1450 Conduct of Qualification Demonstration T-1451 Protocol Document T-1452 Individual Qualification
448	T-1460 Calibration T-1470 Examination T-1471 Intermediate Rigor Detection Test T-1472 High Rigor Detection Tests
449	T-1472.1 Total Number of Samples for a Given Number of Misses at a Specified Confidence Level and POD T-1472.2 Required Number of First Stage Examiners vs. Target Pass Rate
450	T-1480 Evaluation T-1490 Documentation and Records
451	Mandatory Appendix II UT Performance Demonstration Criteria II-1410 Scope II-1420 General II-1430 Equipment II-1434 Qualification Blocks II-1440 Application Requirements
452	II-1450 Conduct of Qualification Demonstration II-1434 Flaw Characterization for Tables II-1434-1 and II-1434-2 II-1434-1 Flaw Acceptance Criteria for 4-in. to 12-in. Thick Weld II-1434-2 Flaw Acceptance Criteria for Larger Than 12-in. Thick Weld
453	II-1460 Calibration II-1470 Examination II-1480 Evaluation II-1481 Low Level II-1482 Intermediate Level II-1483 High Level II-1490 Documentation
454	Article 15 Alternating Current Field Measurement Technique (ACFMT) T-1510 Scope T-1520 General T-1521 Supplemental Requirements T-1522 Written Procedure Requirements T-1530 Equipment T-1531 Instrument T-1532 Probes T-1533 Calibration Blocks
455	T-1540 Miscellaneous Requirements T-1541 Surface Conditioning T-1542 Demagnetization T-1543 Identification of Weld Examination Areas T-1560 Calibration T-1561 General Requirements T-1562 Calibration T-1522 Requirements of an ACFMT Examination Procedure
456	T-1563 Performance Confirmation T-1533 ACFMT Calibration Block
457	T-1570 Examination T-1571 General Examination Requirements T-1572 Examination Coverage T-1573 Overlap T-1574 Interpretation T-1580 Evaluation T-1590 Documentation T-1591 Recording Indication T-1592 Examination Record T-1593 Report
458	Article 16 Magnetic Flux Leakage (MFL) Examination T-1610 Scope T-1620 General T-1621 Personnel Qualification Requirements T-1622 Equipment Qualification Requirements T-1623 Written Procedure Requirements
459	T-1630 Equipment T-1640 Requirements T-1650 Calibration T-1660 Examination T-1622.1.1 Reference Plate Dimensions
460	T-1670 Evaluation T-1680 Documentation T-1622.1.2 Reference Pipe or Tube Dimensions
461	T-1623 Requirements of an MFL Examination Procedure
462	Article 17 Remote Field Testing (RFT) Examination Method T-1710 Scope T-1720 General T-1721 Written Procedure Requirements T-1722 Personnel Requirements T-1730 Equipment T-1750 Technique T-1721 Requirements of an RFT Examination Procedure
463	T-1760 Calibration T-1761 Instrument Calibration T-1762 System Preparation T-1763 System Setup and Calibration T-1762 Pit Reference Tube (Typical)
464	T-1763.1(a) Voltage Plane Display of Differential Channel Response for Through-Wall Hole (Through-Hole Signal) and 20% Groove Showing Preferred Angular Relationship T-1763.1(b) Voltage Plane Display of Differential Channel Response for the Tube Support Plate (TSP), 20% Groove, and Through-Wall Hole (Through-Hole Signal)
465	T-1764 Auxiliary Frequency(ies) Calibration Procedure T-1765 Calibration Confirmation T-1766 Correlation of Signals to Estimate Depth of Flaws T-1770 Examination T-1771 General T-1772 Probe Speed T-1780 Evaluation T-1790 Documentation T-1763.2 Reference Curve and the Absolute Channel Signal Response From Two Circumferential Grooves and a Tube Support Plate
466	T-1793 Record Retention
467	Article 18 Acoustic Pulse Reflectometry (APR) Examination T-1810 Scope T-1820 General T-1821 Written Procedure Requirements T-1830 Equipment T-1831 Instrumentation T-1832 Reference Specimen T-1821 Requirements of an Acoustic Pulse Reflectometry Examination Procedure
468	T-1832 Reference Specimens
469	T-1840 Miscellaneous Requirements T-1841 Tube or Pipe Precleaning T-1850 Prior to the Examination T-1860 Calibration T-1861 Instrument Calibration T-1862 System Preparation T-1863 System Setup T-1864 Functional Test
470	T-1865 Analysis of Signals to Determine Flaw Type and Estimate Flaw Size T-1870 Examination T-1880 Evaluation T-1890 Documentation T-1891 Recording Indications
471	T-1892 Examination Records T-1893 Storage Media T-1865.1 Signal Analysis From Various Types of Discontinuities
472	T-1865.2 Reflection From a Through-Wall Hole
473	Article 19 Guided Wave Examination Method for Piping T-1910 Scope T-1920 General T-1921 Written Procedure Requirements T-1922 Personnel Qualification T-1930 Equipment T-1931 Instrumentation Requirements T-1932 Sensors T-1950 Wave Modes
474	T-1951 Miscellaneous Requirements T-1960 Calibration T-1961 Instrument Calibration T-1921.1 Requirements of a GWT Examination Procedure
475	T-1962 System Calibration T-1963 Distance–Amplitude Correction (DAC) or Time-Corrected Gain (TCG) T-1964 Detection Threshold T-1965 Call Level T-1970 Examination T-1971 Examination Coverage T-1980 Evaluation T-1981 General T-1982 Evaluation Level T-1990 Documentation T-1992 Examination Records
477	Nonmandatory Appendix A Operation of GWT Systems A-1910 Scope A-1920 General
478	A-1921 Call Level A-1922 Effect of Pipe Geometry on Examination Range A-1920 Illustration of the Guided Wave Examination Procedure
479	A-1923 Effect of Pipe Coating A-1924 Effect of General Corrosion on Examination Range A-1925 Special Applications of Guided Wave Testing
480	Subsection B Documents Adopted by Section V
481	Article 22 Radiographic Standards
483	SE-94
497	SE-747
513	SE-999
519	SE-1025
527	SE-1030/SE-1030M
539	SE-1114
545	SE-1165
559	SE-1255
571	SE-1416
579	SE-1647
585	SE-2597/SE-2597M
604	Article 23 Ultrasonic Standards
605	SA-388/SA-388M
615	SA-435/SA-435M
619	SA-577/SA-577M
623	SA-578/SA-578M
629	SA-609/SA-609M
639	SA-745/SA-745M
645	SB-548
651	SD-7091
659	SE-213
671	SE-273
677	SE-317
691	SE-797/SE-797M
699	SE-2491
719	SE-2700
728	Article 24 Liquid Penetrant Standards
729	SD-129
735	SD-516
741	SD-808
747	SE-165/SE-165M
767	SE-2297
773	SE-3022
782	Article 25 Magnetic Particle Standards
783	SD-1186
789	SE-709
837	Article 26 Eddy Current Standard
839	SE-243
845	Article 29 Acoustic Emission Standards
847	SE-650/SE-650M
851	SE-750
863	SE-976
873	SE-1067/SE-1067M
889	SE-1118/SE-1118M
903	SE-1139/SE-1139M
911	SE-1211/SE-1211M
917	SE-1419/SE-1419M
925	SE-2075/SE-2075M
930	Article 30 Terminology for Nondestructive Examinations Standard
931	Article 31 Alternating Current Field Measurement Standard
933	SE-2261/SE-2261M
948	Article 32 Remote Field Testing Standard
949	SE-2096/SE-2096M
959	Article 33 Guided Wave Standards
961	SE-2775
973	SE-2929
984	Mandatory Appendix Mandatory Appendix II Standard Units for Use in Equations II-1 Standard Units for Use in Equations
985	Nonmandatory Appendix Nonmandatory Appendix A Guidance for the Use of U.S. Customary and SI Units in the ASME Boiler and Pressure Vessel Code A-1 Use of Units in Equations A-2 Guidelines Used to Develop SI Equivalents
987	A-3 Soft Conversion Factors
989	Endnotes