ASME PTB 2 2022

$75.42

ASME PTB-2-2022 Guide to Life Cycle Management of Pressure Equipment Integrity

Published By	Publication Date	Number of Pages
ASME	2022

Guaranteed Safe Checkout

Category: ASME

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

This Guide provides a summary of some of the more commonly used codes, standards, recommended practices (RPs), publications, specifications and guidelines produced by organizations based in the United States that assist manufacturers, owners, users and their designated agents, regulators and other stakeholders in maintaining the integrity of fixed pressure equipment in process plants and in general industrial use.

PDF Catalog

PDF Pages	PDF Title
4	Table of Contents
7	FOREWORD
9	ABBREVIATIONS AND ACRONYMS
10	1 Scope
11	2 Definitions
12	3 Organization of this Guide
14	4 Power (Steam) Boilers 4.1 Specification (Purchase) of Power (Steam) Boilers
16	4.2 Design and Construction of Power (Steam) Boilers 4.3 Operation of Power (Steam) Boilers
17	4.4 In-service Inspection of Power (Steam) Boilers 4.5 Fitness-for-service Analysis of Power (Steam) Boilers
18	4.6 Repair of Power (Steam) Boilers
19	5 Heat Recovery Steam Generators (HRSGs) 5.1 Specification (Purchase) of HRSGs
21	5.2 Design and Construction of HRSGs 5.3 Operation of HRSGs
22	5.4 In-service Inspection of HRSGs
23	5.5 Fitness-for-service Analysis of HRSGs 5.6 Repair of HRSGs
25	6 Heating Boilers 6.1 Specification (Purchase) of Heating Boilers
27	6.2 Design and Construction of Heating Boilers 6.3 Operation of Heating Boilers
28	6.4 In-service Inspection of Heating Boilers
29	6.5 Fitness-for-service Analysis of Heating Boilers 6.6 Repair of Heating Boilers
30	7 Unfired Steam Boilers 7.1 Specification (Purchase) of Unfired Steam Boilers
32	7.2 Design and Construction of Unfired Steam Boilers 7.3 Operation of Unfired Steam Boilers
33	7.4 In-service Inspection of Unfired Steam Boilers 7.5 Fitness-for-service Analysis of Unfired Steam Boilers
34	7.6 Repair of Unfired Steam Boilers
35	8 Typical Pressure Vessels
37	8.1 Specification (Purchase) of Typical Pressure Vessels
39	8.2 Design and Construction of Typical Pressure Vessels
40	8.3 Operation of Typical Pressure Vessels 8.4 In-service Inspection of Typical Pressure Vessels
41	8.5 Fitness-for-service Analysis of Typical Pressure Vessels
42	8.6 Repair of Typical Pressure Vessels
44	9 Large, Heavy Wall and High Temperature Pressure Vessels
46	9.1 Specification (Purchase) of Large, Heavy Wall and High Temperature Pressure Vessels
48	9.2 Design and Construction of Large, Heavy Wall and High Temperature Pressure Vessels
49	9.3 Operation of Large, Heavy Wall and High Temperature Pressure Vessels
50	9.4 In-service Inspection of Large, Heavy Wall and High Temperature Pressure Vessels
51	9.5 Fitness-for-service Analysis of Large, Heavy Wall and High Temperature Pressure Vessels
52	9.6 Repair of Large, Heavy Wall and High Temperature Pressure Vessels
53	10 High Pressure Vessels 10.1 Specification (Purchase) of High Pressure Vessels
55	10.2 Design and Construction of High Pressure Vessels 10.3 Operation of High Pressure Vessels
56	10.4 In-service Inspection of High Pressure Vessels 10.5 Fitness-for-service Analysis of High Pressure Vessels
57	10.6 Repair of High Pressure Vessels
58	11 Heat Exchangers
59	11.1 Specification (Purchase) of Heat Exchangers
61	11.2 Design and Construction of Heat Exchangers
63	11.3 Operation of Heat Exchangers 11.4 In-service Inspection of Heat Exchangers
64	11.5 Fitness-for-service Analysis of Heat Exchangers
65	11.6 Repair of Heat Exchangers
66	12 Storage Tanks 12.1 Specification (Purchase) of Storage Tanks
68	12.2 Design and Construction of Storage Tanks 12.3 Operation of Storage Tanks
69	12.4 In-service Inspection of Storage Tanks
70	12.5 Fitness-for-service Analysis of Storage Tanks 12.6 Repair of Storage Tanks
72	13 Piping Systems
73	13.1 Specification (Purchase) of Piping Systems
75	13.2 Design and Construction of Piping Systems
77	13.3 Operation of Piping Systems 13.4 In-service Inspection of Piping Systems
78	13.5 Fitness-for-service Analysis of Piping Systems
79	13.6 Repair of Piping Systems
81	14 Acquisition (Purchase) of Components, Including Fittings
83	15 Post-construction Documents for Components, Including Fittings
84	16 Overpressure Protection Systems 16.1 Specification (Purchase) of Overpressure Protection Systems
86	16.2 Design and Construction of Overpressure Protection Systems 16.3 Operation of Overpressure Protection Systems 16.4 In-service Inspection of Overpressure Protection Systems
87	16.5 Fitness-for-service Analysis of Overpressure Protection Systems 16.6 Repair of Overpressure Protection Systems
88	17 Specific Tasks
89	Appendix A SUMMARY OF STANDARDS REFERENCED AMERICAN PETROLEUM INSTITUTE (API) STANDARDS A-1 API 510 Pressure Vessel Inspection Code: In-service Inspection, Rating, Repair, and Alteration
90	A-2 API Std 520 Part I Sizing, Selection, and Installation of Pressure-relieving Devices─Part I: Sizing and Selection
91	A-3 API Std 520 Part II Sizing, Selection, and Installation of Pressure-relieving Devices─Part II: Installation
92	A-4 API Std 521 Pressure-relieving and Depressuring Systems
93	A-5 API Std 526 Flanged Steel Pressure-relief Valves
94	A-6 API Std 527 Seat Tightness of Pressure Relief Valves
95	A-7 API Std 530 Calculation of Heater-tube Thickness in Petroleum Refineries
96	A-8 API RP 534 Heat Recovery Steam Generators
97	A-9 API Std 537 Flare Details for Petroleum, Petrochemical, and Natural Gas Industries
98	A-10 API RP 538 Industrial Fired Boilers for General Refinery and Petrochemical Service
99	A-11 API Std 560 Fired Heaters for General Refinery Service
100	A-12 API 570 Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems
101	A-13 API RP 571 Damage Mechanisms Affecting Fixed Equipment in the Refining Industry
102	A-14 API RP 572 Inspection Practices for Pressure Vessels
103	A-15 API RP 573 Inspection of Fired Boilers and Heaters
104	A-16 API RP 574 Inspection Practices for Piping System Components
105	A-17 API RP 575 Inspection Practices for Atmospheric and Low-pressure Storage Tanks
106	A-18 API RP 576 Inspection of Pressure-Relieving Devices
107	A-19 API RP 577 Welding Processes, Inspection, and Metallurgy
108	A-20 API RP 578 Guidelines for a Material Verification Program (MVP) for New and Existing Assets
109	A-21 API 579-1/ASME FFS-1 Fitness-For-Service
110	A-22 API 579-2/ASME FFS-2 Fitness-For-Service Example Problem Manual
111	A-23 API RP 580 Risk-Based Inspection
112	A-24 API RP 581 Risk-Based Inspection Methodology
113	A-25 API RP 582 Welding Guidelines for the Chemical, Oil and Gas Industries
114	A-26 API RP 583 Corrosion Under Insulation and Fireproofing
115	A-27 API RP 584 Integrity Operating Windows
116	A-28 API RP 585 Pressure Equipment Integrity Incident Investigation
117	A-29 API Bulletin 587 Guidance for the Development of Ultrasonic Examiner Qualification Programs
118	A-30 API RP 588 Recommended Practice for Source Inspection and Quality Surveillance of Fixed Equipment
119	A-31 API RP 591 Process Valve Qualification Procedure
120	A-32 API Std 594 Check Valves: Flanged, Lug, Wafer and Butt-Welding
121	A-33 API Std 598 Valve Inspection and Testing
122	A-34 API Std 599 Metal Plug Valves—Flanged, Threaded, and Welding Ends
123	A-35 API Std 600 Steel Gate Valves – Flanged and Butt-welding Ends, Bolted Bonnets
124	A-36 API Std 602 Gate, Globe and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural Gas Industries
126	A-37 API Std 603 Corrosion-resistant, Bolted Bonnet Gate Valves—Flanged and Butt-welding Ends
127	A-38 API Std 607 Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats
128	A-39 API Std 608 Metal Ball Valves-Flanged, Threaded and Welding Ends
129	A-40 API Std 609 Butterfly Valves: Double-flanged, Lug- and Wafer-Type, and Butt Welding Ends
130	A-41 API RP 615 Valve Selection Guide
131	A-42 API Std 620 Design and Construction of Large, Welded, Low-pressure Storage Tanks
133	A-43 API RP 621 Reconditioning of Metallic Gate, Globe, and Check Valves
134	A-44 API Std 622 Type Testing of Process Valve Packing for Fugitive Emissions
135	A-45 API Std 623 Steel Globe Valves—Flanged and Butt-welding Ends, Bolted Bonnets
136	A-46 API Std 624 Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emissions
137	A-47 API Std 641 Type Testing of Quarter-turn Valves for Fugitive Emissions
138	A-48 API Std 650 Welded Tanks for Oil Storage
139	A-49 API RP 651 Cathodic Protection of Aboveground Petroleum Storage Tanks
140	A-50 API RP 652 Linings of Aboveground Petroleum Storage Tank Bottoms
141	A-51 API Std 653 Tank Inspection, Repair, Alteration, and Reconstruction
142	A-52 API Std 660 Shell-and-Tube Heat Exchangers
143	A-53 API Std 661 Petroleum, Petrochemical, and Natural Gas Industries – Air-cooled Heat Exchangers
144	A-54 API Std 662, Part 1 Plate Heat Exchangers for General Refinery Services–Part 1–Plate-and-Frame Heat Exchangers
145	A-55 API Std 663 Hairpin-type Heat Exchangers
146	A-56 API Std 664 Spiral Plate Heat Exchangers
147	A-57 API Std 668 Brazed Aluminum Plate-fin Heat Exchangers
148	A-58 API RP 686 Recommended Practice for Machinery Installation and Installation Design–Chapter 6–Piping
149	A-59 API RP 751 Safe Operation of Hydrofluoric Acid Alkylation Units
150	A-60 API RP 932-B Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems
151	A-61 API RP 934A Materials and Fabrication of 2¼Cr-1Mo, 2¼Cr-1Mo-¼V, 3Cr-1Mo and 3Cr-1Mo-¼V Steel Heavy Wall Pressure Vessels for High-temperature, High-pressure Hydrogen Service
152	A-62 API RP 934C Materials and Fabrication of 1¼Cr-½Mo Steel Heavy Wall Pressure Vessels for High-pressure Hydrogen Service Operating at or Below 825 F (440 C)
153	A-63 API RP 934E Recommended Practice for Materials and Fabrication of 1¼Cr-½Mo Steel Pressure Vessels for Service above 825 F (440 C)
154	A-64 API TR 934G Design, Fabrication, Operational Effects, Inspection, Assessment, and Repair of Coke Drums and Peripheral Components in Delayed Coking Units
155	A-65 API Std 936 Refractory Installation Quality Control—Inspection and Testing Monolithic Refractory Linings and Materials
156	A-66 API RP 939C Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries
157	A-67 API RP 941 Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants
159	A-68 API RP 945 Avoiding Environmental Cracking in Amine Units
160	A-69 API RP 970 Corrosion Control Documents
161	A-70 API Std 976 Refractory Installation Quality Control—Inspection and Testing of AES/RCF Fiber Linings and Materials
162	A-71 API Std 1104 Welding of Pipelines and Related Facilities
163	A-72 API Std 2000 Venting Atmospheric and Low-pressure Storage Tanks
164	A-73 API RP 2201 Safe Hot Tapping Practices in the Petroleum and Petrochemical Industries
165	A-74 API RP 2611 Terminal Piping Inspection—Inspection of In-Service Terminal Piping Systems
166	A-75 API Std 2350 Overfill Protection for Storage Tanks in Petroleum Facilities
167	AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE) STANDARDS A-76 ASCE/SEI 7 Minimum Design Loads and Associated Criteria for Buildings and Other Structures
168	AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) STANDARDS A-77 ASME B16.1 Gray Iron Pipe Flanges and Flanged Fittings (Classes 25, 125, and 250)
169	A-78 ASME B16.3 Malleable Iron Threaded Fittings (Classes 150 and 300)
170	A-79 ASME B16.4 Gray Iron Threaded Fittings (Classes 125 and 250)
171	A-80 ASME B16.5 Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard
172	A-81 ASME B16.9 Factory-Made Wrought Buttwelding Fittings
173	A-82 ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves
174	A-83 ASME B16.11 Forged Fittings, Socket-Welding and Threaded
175	A-84 ASME B16.14 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads
176	A-85 ASME B16.15 Cast Copper Alloy Threaded Fittings (Classes 125 and 250)
177	A-86 ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings
178	A-87 ASME B16.20 Metallic Gaskets for Pipe Flanges
180	A-88 ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges
181	A-89 ASME B16.22 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
182	A-90 ASME B16.24 Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves (Classes 150, 300, 600, 900, 1500, and 2500)
183	A-91 ASME B16.25 Buttwelding Ends
184	A-92 ASME B16.26 Cast Copper Alloy Fittings for Flared Copper Tubes
185	A-93 ASME B16.34 Valves – Flanged, Threaded, and Welding End
186	A-94 ASME B16.36 Orifice Flanges
187	A-95 ASME B16.39 Malleable Iron Threaded Pipe Unions Classes 150, 250, and 300
188	A-96 ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings (Classes 150 and 300)
189	A-97 ASME B16.47 Large Diameter Steel Flanges (NPS 26 through NPS 60 Metric/Inch Standard)
190	A-98 ASME B16.48 Line Blanks
191	A-99 ASME B16.50 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings
192	A-100 ASME B16.52 Forged Nonferrous Fittings, Socket-Welding and Threaded (Titanium, Titanium Alloys, Aluminum, and Aluminum Alloys)
193	A-101 ASME B31.1 Power Piping
194	A-102 ASME B31.3 Process Piping
195	A-103 ASME B31.5 Refrigeration Piping and Heat Transfer Components
196	A-104 ASME B31.9 Building Services Piping
198	A-105 ASME B31.12 Hydrogen Piping and Pipelines
199	A-106 ASME B31E Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems
200	A-107 ASME B31G Manual for Determining the Remaining Strength of Corroded Pipelines
202	A-108 ASME B31J Stress Intensification Factors (i-Factors), Flexibility Factors (k-Factors), and Their Determination for Metallic Piping Components
203	A-109 ASME B31P Standard Heat Treatments for Fabrication Processes
204	A-110 ASME B31T Standard Toughness Requirements for Piping
205	A-111 ASME B36.10M Welded and Seamless Wrought Steel Pipe
206	A-112 ASME B36.19M Stainless Steel Pipe
207	A-113 ASME B40.100 Pressure Gauges and Gauge Attachments
209	A-114 ASME BPE Bioprocessing Equipment
210	A-115 BPVC Section I Rules for Construction of Power Boilers
211	A-116 BPVC Section II–Materials–Part A Ferrous Material Specifications
212	A-117 BPVC Section II–Materials–Part B Nonferrous Material Specifications
213	A-118 BPVC Section II–Materials–Part C Specifications for Welding Rods, Electrodes, and Filler Metals
214	A-119 BPVC Section II–Materials–Part D Properties (Customary)
215	A-120 BPVC Section II–Materials–Part D Properties (Metric)
216	A-121 BPVC Section IV Rules for Construction of Heating Boilers
217	A-122 BPVC Section V Nondestructive Examination
218	A-123 BPVC Section VI Recommended Rules for the Care and Operation of Heating Boilers
219	A-124 BPVC Section VII Recommended Guidelines for the Care of Power Boilers
220	A-125 BPVC Section VIII–Division 1 Rules for Construction of Pressure Vessels
221	A-126 BPVC Section VIII–Division 2 Rules for Construction of Pressure Vessels–Alternative Rules
223	A-127 BPVC Section VIII–Division 3 Rules for Construction of Pressure Vessels–Alternative Rules for Construction of High Pressure Vessels
224	A-128 BPVC Section IX Welding, Brazing, and Fusing Qualifications
225	A-129 BPVC Section X Fiber-Reinforced Plastic Pressure Vessels
227	A-130 BPVC Section XIII Rules for Overpressure Protection
229	A-131 BPVC Code Cases Boilers and Pressure Vessels
230	A-132 ASME NM.1 Thermoplastic Piping Systems
231	A-133 ASME NM.2 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems
232	A-134 ASME NM.3.1 Nonmetallic Materials Part 1—Thermoplastic Material Specifications
233	A-135 ASME NM.3.2 Nonmetallic Materials Part 2 — Reinforced Thermoset Plastic Material Specifications
234	A-136 ASME NM.3.3 Nonmetallic Materials Part 3—Properties
235	A-137 ASME RTP-1 Reinforced Thermoset Plastic Corrosion-Resistant Equipment
237	A-138 ASME PCC-1 Guidelines for Pressure Boundary Bolted Flange Joint Assembly
238	A-139 ASME PCC-2 Repair of Pressure Equipment and Piping
239	A-140 ASME PCC-3 Inspection Planning Using Risk-Based Methods
240	A-141 ASME PTC 25 Pressure Relief Devices (Performance Test Codes)
241	AMERICAN SOCIETY OF NONDESTRUCTIVE TESTING (ASNT)STANDARDS A-142 ASNT CP-189 ASNT for Qualification and Certification of Nondestructive Testing Personnel
242	A-143 ASNT RP SNT-TC-1A Personnel Qualification and Certification in Nondestructive Testing
244	ELECTRIC POWER RESEARCH INSTITUTE (EPRI) STANDARDS A-144 EPRI CS-4774 Guidelines for the Evaluation of Seam-Welded High-Energy Piping
245	A-145 EPRI CS-5208 Life Extension and Assessment of Fossil Power Plants (Conference Proceedings)
246	A-146 EPRI CS-5235 Recommended Practices for Operating and Maintaining Steam Surface Condensers
247	NATIONAL ASSOCIATION OF CORROSION ENGINEERS (NACE) STANDARDS A-147 NACE MR0103/ISO 17945-2015 Petroleum, petrochemical and natural gas industries–Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
248	A-148 NACE SP0106-2018 Control of Internal Corrosion in Steel Pipelines and Piping Systems
249	A-149 NACE SP0169-2013 Control of External Corrosion on Underground or Submerged Metallic Piping Systems
250	A-150 NACE SP0170-2018 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During a Shutdown of Refinery Equipment
251	A-151 NACE SP0288-2011 Inspection of Lining Application in Steel and Concrete Equipment
252	A-152 NACE SP0296-2016–Detection, Repair, and Mitigation of Cracking in Refinery Equipment in Wet H2S Environments
253	A-153 NACE SP0472-2020 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments
254	A-154 NACE SP0590-2015 Prevention, Detection, and Correction of Deaerator Cracking
255	NATIONAL BOARD OF BOILER AND PRESSURE VESSEL INSPECTORS (NBBPVI) STANDARDS A-155 NB-18 National Board Pressure Relief Device Certifications
257	A-156 NB-23 National Board Inspection Code
259	A-157 NB-370 National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations
260	TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION (TEMA) STANDARDS A-158 Standards of the Tubular Exchanger Manufacturers Association (TEMA)
261	Appendix B ADDITIONAL References B-1 API 5UE Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections
262	B-2 API Publication 327 Aboveground Storage Tank Standards: A Tutorial
263	B-3 API TR 654 Aboveground Storage Tank Caulking or Sealing the Bottom Edge Projection to the Foundation
264	B-4 API Publication 932-A A Study of Corrosion in Hydroprocess Reactor Effluent Air Cooler Systems
265	B-5 API TR 934-D Technical Report on the Materials and Fabrication Issues of 1 1/4Cr-1/2Mo and 1Cr-1/2Mo Steel Pressure Vessels
266	B-6 API TR 934-F, Part 1 Impact of Hydrogen Embrittlement on Minimum Pressurization Temperature for Thick-Wall Cr-Mo Steel Reactors in High-Pressure H2 Service—Initial Technical Basis for RP 934-F
267	B-7 API TR 934-F, Part 2 Impact of Hydrogen Embrittlement on Minimum Pressurization Temperature for Thick-Wall Cr-Mo Steel Reactors in High-Pressure H2 Service—Initial Technical Basis for RP 934-F
268	B-8 API TR 934-F, Part 3 Subcritical Cracking of Modern 2¼Cr-1Mo-¼V Steel Due to Dissolved Internal Hydrogen and H2 Environment, Research Report
269	B-9 API TR 934-F, Part 4 The Effects of Hydrogen for Establishing a Minimum Pressurization Temperature (MPT) for Heavy Wall Steel Reactor Vessels
270	B-10 API Publication 935 Thermal Conductivity Measurement Study of Refractory Castables
271	B-11 API Publication 937-A Study to Establish Relations for the Relative Strength of API 650 Cone Roof Roof-to-Shell and Shell-to-Bottom Joints
272	B-12 API Publication 938-A An Experimental Study of Causes and Repair of Cracking of 1¼Cr-1/2Mo Steel Equipment
273	B-13 API TR 938-B Use of 9Cr-1Mo-V (Grade 91) Steel in the Oil Refining Industry
274	B-14 API TR 938-C Use of Duplex Stainless Steels in the Oil Refining Industry
275	B-15 API Publication 939-A Research Report on Characterization and Monitoring of Cracking in Wet H2S Service
276	B-16 API Publication 939-B Repair and Remediation Strategies for Equipment Operating in Wet H2S Service
277	B-17 API TR 939-D Stress Corrosion Cracking of Carbon Steel in Fuel-Grade Ethanol: Review, Experience Survey, Field Monitoring, and Laboratory Testing
278	B-18 API Bulletin 939-E Identification, Repair, and Mitigation of Cracking of Steel Equipment in Fuel Ethanol Service
279	B-19 API TR 942-A Materials, Fabrication, and Repair Considerations for Hydrogen Reformer Furnace Outlet Pigtails and Manifolds
280	B-20 API TR 942-B Material, Fabrication, and Repair Considerations for Austenitic Alloys Subject to Embrittlement and Cracking in High Temperature 565 C to 760 C (1050 F to 1400 F) Refinery Services
281	B-21 API TR 977 ASTM C704 Test Variability Reduced to Allow Further Optimization of Erosion-Resistant Refractories for Critical Oil Refining Applications
282	B-22 API TR 978 Monolithic Refractories: Manufacture, Properties, and Selection
283	B-23 API TR 979 Applications of Refractory Lining Materials
284	B-24 API TR 980 Monolithic Refractories: Installation and Dryout
285	B-25 ASCE 48303 Wind Loads for Petrochemical and Other Industrial Facilities
287	B-27 ASCE Anchorage Design for Petrochemical Facilities
288	B-28 ASCE Design of Secondary Containment in Petrochemical Facilities
289	B-29 Companion Guide to the ASME Boiler & Pressure Vessel Code, Fifth Edition – Volumes 1 & 2
290	B-30 ASME PTB-1—2014 ASME Section VIII – Division 2, Criteria and Commentary
291	B-31 ASME PTB-3—2013 Section VIII – Division 2 Example Problem Manual
292	B-32 ASME PTB-4—2013 Section VIII–Division 1 Example Problem Manual
294	B-33 ASME PTB-5—2019 Section VIII – Division 3 Example Problem Manual
295	B-34 ASME PTB-7—2014 Criteria for Shell-and-Tube Heat Exchangers According to Part UHX of ASME Section VIII Division 1
296	B-35 ASME PTB-8—2014 Procurement Guidelines for Metallic Materials
297	B-36 ASME PTB-10—2015 Guide for ASME Section VIII Div 1 Stamp Holders—Use of ASME Section VIII, Division 1 to Meet the EC Pressure Equipment Directive (2014/68/EU)
298	B-37 ASME PTB-11—2017 Guide for ASME Section I Stamp Holders—Use of ASME Section I to Meet the EC Pressure Equipment Directive (2014/68/EU)
299	MTI Publications B-38 MTI Publication No. 30: Damage Assessment: Investigating Fires, Explosions and Storm Damage in Chemical Plants; 2nd Edition, 2012, 196 pages B-39 Design, Installation, Maintenance and Inspection of Metallic Plastic-Lined Pipe, 2016, 251 pages B-40 Fiber Reinforced Plastic Flange Design, 2016, 96 pages
300	B-41 Global FRP Standards; Volume 1: Discussion, 2015, 362 pages B-42 Guide for the Repair and Alteration of FRP Equipment, 2010, 163 pages
301	B-43 Guidelines for Large Diameter FRP Tanks, 2015, 220 pages B-44 Guidelines for Troubleshooting Water Cooled Heat Exchangers, 2004, 276 pages B-45 Implementing & Evergreening RBI in Process Plants, 2005, 128 pages
302	B-46 Operation, Maintenance and Repair of Glass-Lined Equipment, 2008, 163 pages B-47 Practical Guide to Field Inspection of FRP Equipment and Piping, 2001, 51 pages B-48 Users Guide to ASME Standards for Fiberglass Tanks and Vessels, MTI Publication No. 50, 1996, 168 pages
303	B-49 Additional MTI Publications
304	B-50 WRC 107 Local Stresses In Spherical And Cylindrical Shells Due To External Loadings
305	B-51 WRC 175 PVRC Recommendations on Toughness Requirements for Ferritic Materials
306	B-52 WRC 198 Part 1 Secondary Stress Indices for Integral Structural Attachments to Straight Pipe
307	B-53 WRC 265 Interpretive Report on Small Scale Test Correlations with Klc Data
308	B-54 WRC 409 Fundamental Studies of the Metallurgical Causes and Mitigation of Reheat Cracking in 1¼Cr-½Mo and 2¼Cr-1Mo Steels
309	B-55 WRC 411 An Experimental Study of Causes and Repair of Cracking of 1¼Cr-½Mo Steel Equipment
310	B-56 WRC 412 Challenges and Solutions in Repair Welding for Power and Processing Plants – Proceedings of a Workshop
311	B-57 WRC 429 3D Stress Criteria Guidelines for Application
312	B-58 WRC 430 Review of Existing Fitness-For-Service Criteria for Crack-Like Flaws
313	B-59 WRC 447 Evaluation of Operating Margins for In-Service Pressure Equipment
314	B-60 WRC 452 Recommended Practices for Local Heating of Welds in Pressure Vessels
315	B-61 WRC 465 Technologies for the Evaluation of Non-Crack-Like Flaws in Pressurized Components—Erosion/Corrosion, Pitting, Blisters, Shell Out-Of-Roundness, Weld Misalignment, Bulges and Dents
316	B-62 WRC 470 Recommendations for Design of Vessels for Elevated Temperature Service
317	B-63 WRC 474 3D Master S-N Curve Method for Fatigue Evaluation of Welded Components
318	B-64 WRC 488 Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry Introduction Scope
319	Organization and Use
320	B-65 WRC 490 Damage Mechanisms Affecting Fixed Equipment in the Fossil Electric Power Industry Introduction Scope
321	Organization and Use
322	B-66 WRC 506 Examination of Mechanical Properties and Corrosion of High Temperature Alloys after Long Term Service Under Advanced Power Plant Boiler Conditions: The Eddystone Studies
323	B-67 WRC 510 Analysis of the Effects of Temperature on Bolted Joints
324	B-68 WRC 517 Half-Bead Temper-Bead Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo Steels
325	B-69 WRC 538 3D Determination of Pressure Boundary Joint Assembly Bolt Loads
326	B-70 WRC 541 Evaluation of Material Strength Data for Use in API Std 530
327	Appendix C INTERNATIONAL STANDARDS C.1 Pressure Equipment in Australia and New Zealand
333	C.2 Pressure Equipment in the European Union
340	C.3 Pressure Equipment in France
344	C.4 Pressure Equipment in the United Kingdom C.4.1 Standards
346	C.4.2 EEMUA (Engineering Equipment and Materials Users Association) Publications
348	ACKNOWLEDGEMENTS