ASTM-A484 2012(Redline)

$30.55

A484/A484M-12 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings (Redline)

Published By	Publication Date	Number of Pages
ASTM	2012	16

Guaranteed Safe Checkout

Categories: 77.140.20 - Stainless steels, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

Abstract

This specification covers general requirements that shall apply to wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials shall be furnished in one of the following conditions: (1) hot-worked; (2) hot-worked and annealed; (3) hot-worked, annealed and cold-worked; or (4) hot-worked, annealed, and heat-treated. Product analysis tolerances shall be performed wherein the specimens shall conform to the required chemical compositions of carbon, manganese, phosphorus, sulfur, silicon, chromium, nickel, molybdenum, titanium, cobalt, columbium, tantalum, copper, aluminum, nitrogen, tungsten, vanadium, and selenium. The materials shall be heat treated and austenitic stainless steels and austenitic-ferritic grades shall be furnished in the solution annealed condition and shall conform to the required values of temperature, permitted annealing procedure, quenching, and rapid cooling.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification ² covers general requirements that shall apply to wrought stainless steel bars, shapes, forgings, and billets or other semi-finished material (except wire) for forging, under the latest revision of each of the following ASTM specifications: A276 , A314 , A458 , A473 , A477 , A479/A479M , A564/A564M , A565/A565M , A582/A582M , A638/A638M , A705/A705M , and A831/A831M .

1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail. The purchase order requirements shall not take precedence if they, in any way, violate the requirements of the product specification or this specification; for example, by waiving a test requirement or by making a test requirement less stringent.

1.3 The requirements for introduction of new materials in specifications referencing this specification are given in Annex A1 .

1.4 General requirements for flat-rolled stainless steel products other than bar are covered in Specification A480/A480M .

1.5 General requirements for wire products in coils are covered in Specification A555/A555M .

1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.7 Unless the order specifies an ???M??? designation, the material shall be furnished to inch-pound units.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels A276 Specification for Stainless Steel Bars and Shapes A314 Specification for Stainless Steel Billets and Bars for Forging A370 Test Methods and Definitions for Mechanical Testing of Steel Products A458 Specification for Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures A473 Specification for Stainless Steel Forgings A477 Specification for Hot-Worked, Hot-Cold Worked and Cold-Worked Alloy Steel Forgings and Forging Billets for High Strength at Elevated Temperatures A479/A479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels A480/A480M Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip A555/A555M Specification for General Requirements for Stainless Steel Wire and Wire Rods A564/A564M Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes A565/A565M Specification for Martensitic Stainless Steel Bars for High-Temperature Service A582/A582M Specification for Free-Machining Stainless Steel Bars A638/A638M Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment A705/A705M Specification for Age-Hardening Stainless Steel Forgings A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products A831/A831M Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components E112 Test Methods for Determining Average Grain Size E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

Federal Standards

FedStd.No.183 Continuous Marking of Iron and Steel Products

Military Standards

MIL-STD-163 Preservation of Steel Products for Shipment (Storage and Overseas Shipment)

Other Standard

PrimaryMetalsBarCode

Keywords

general delivery requirements; stainless steel bars; stainless steel billets; stainless steel forgings; stainless steel shapes;

ICS Code

ICS Number Code 77.140.20 (Steels of high quality)

DOI: 10.1520/A0484_A0484M-12 ASTM International is a member of CrossRef.

ASTM A484 / A484M (Steel Standards)

Citing ASTM Standards

[Back to Top]

Additional information

Standard Title	A484/A484M-12 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings (Redline)
Published Code	ASTM
Publication Date	2012
Pages Count	16
ICS Codes	77.140.20 - Stainless steels

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASTM-A484 2012(Redline)

ASTM A484 / A484M (Steel Standards)

Related products