ASTM-A645 2005
$35.75
A645/A645M-05 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
| Published By | Publication Date | Number of Pages |
| ASTM | 2005 | 4 |
1.1 This specification covers austenitized, quenched, temperized, and reversion-annealed 5% nickel alloy steel plates intended primarily for welded pressure vessels for service at low or cryogenic temperatures.
1.2 The maximum thickness of plates which can be supplied under this specification is limited only by the capacity of the material to meet the specified requirements.
1.3 This material is susceptible to magnetization. Use of magnets in handling after heat treatment should be avoided if residual magnetism would be detrimental to subsequent fabrication or service.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents General Requirements and Ordering Information Materials and Manufacture Heat Treatment |
| 2 | Chemical Requirements Mechanical Requirements Keywords TABLE 1 TABLE 2 |
| 3 | TABLE S1 |
| 4 | TABLE S2 |
Related products
-
ASTM-A635 2005
A635/A635M-05 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy,…
-
ASTM-A644 2005
A644-05 Standard Terminology Relating to Iron Castings Published By Publication Date Number of Pages ASTM…
-
ASTM-F645 2015
F645-15 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems Published…
-
ASTM-A625 2008(Redline)
A625/A625M-08 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced (Redline) Published By Publication Date…
-
ASTM-A945 2005
A945/A945M-05 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur…
-
ASTM-E645 2002
E645-02a Standard Test Method for Efficacy of Microbicides Used in Cooling Systems Published By Publication…
-
ASTM-A649 2004
A649/A649M-04 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery Published By Publication…
-
ASTM-C645 2009
C645-09 Standard Specification for Nonstructural Steel Framing Members Published By Publication Date Number of Pages…
-
ASTM-A625 2008
A625/A625M-08 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced Published By Publication Date Number…
-
ASTM-C645 2009
C645-09a Standard Specification for Nonstructural Steel Framing Members Published By Publication Date Number of Pages…
-
ASTM-A644 2009(Redline)
A644-09a Standard Terminology Relating to Iron Castings (Redline) Published By Publication Date Number of Pages…
-
ASTM-F645 2015
F645-15a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems Published…
-
ASTM-A635 2007
A635/A635M-07 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy,…
-
ASTM-A635 2009
A635/A635M-09a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength…
-
ASTM-A675 2009
A675/A675M-03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties Published By Publication…
-
ASTM-A945 2006
A945/A945M-06 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur…
-
ASTM-A345 2009(Redline)
A345-09 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications (Redline) Published By Publication Date…
-
ASTM-E645 2007(Redline)
E645-07 Standard Test Method for Efficacy of Microbicides Used in Cooling Water Systems (Redline) Published…
-
ASTM-F645 2015(Redline)
F645-15a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems (Redline)…
-
ASTM-C645 2007
C645-07a Standard Specification for Nonstructural Steel Framing Members Published By Publication Date Number of Pages…
-
ASTM-A845 2000
A845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel (Withdrawn…
-
ASTM-F645 2004
F645-04 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems Published By…
-
ASTM-A635 2004
A635/A635M-04e1 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy,…
-
ASTM-A649 2008
A649/A649M-08 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery Published By Publication…
-
ASTM-A345 2009
A345-09 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications Published By Publication Date Number…
-
ASTM-A745 2009
A745/A745M-94(2009) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings Published By Publication Date Number…
-
ASTM-A945 2005
A945/A945M-05e1 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur…
-
ASTM-A640 2002
A640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable Published…
-
ASTM-C645 2007
C645-07b Standard Specification for Nonstructural Steel Framing Members Published By Publication Date Number of Pages…
-
ASTM-A675 2009(Redline)
A675/A675M-03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties (Redline) Published By…
-
ASTM-A345 2004
A345-04 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications Published By Publication Date Number…
-
ASTM-C645 2006
C645-06 Standard Specification for Nonstructural Steel Framing Members Published By Publication Date Number of Pages…
-
ASTM-A635 2009(Redline)
A635/A635M-09b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength…
-
ASTM-A945 2000
A945/A945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur…
-
ASTM-A675 2003
A675/A675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties Published By Publication…
-
ASTM-A745 2003
A745/A745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings Published By Publication Date Number…
-
ASTM-A635 2008
A635/A635M-08 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength…
-
ASTM-A646 2006
A646/A646M-06 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace…
-
ASTM-A625 2003
A625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced Published By Publication Date…
-
ASTM-C645 2004
C645-04 Standard Specification for Nonstructural Steel Framing Members Published By Publication Date Number of Pages…
