ASTM-A673 2005
$40.63
A673/A673M-05a Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
| Published By | Publication Date | Number of Pages |
| ASTM | 2005 | 5 |
1.1 This specification establishes the procedure for longitudinal Charpy V-notch testing of structural steel and contains two frequencies of testing. The impact properties of steel can vary within the same heat and piece, be it as rolled, control rolled, or heat treated. The purchaser should, therefore, be aware that testing of one plate, bar, or shape does not provide assurance all plates, bars, or shapes of the same heat as processed will be identical in toughness with the product tested. Normalizing or quenching and tempering the product will reduce the degree of variation.
1.2 This specification is intended to supplement specifications for structural steel when so specified.
1.3 This specification does not necessarily apply to all product specifications; therefore, the manufacturer or processor should be consulted for energy absorption levels and minimum testing temperatures that can be expected or supplied.
1.4 Two frequencies of testing (P and H) are prescribed.
1.5 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Ordering Information Tests |
| 2 | FIG. 1 FIG. 2 FIG. 3 |
| 3 | Frequency of Testing Heat Treatment Retests TABLE 1 |
| 4 | Test Reports Keywords X1. VARIATION IN CHARPY V-NOTCH TESTS X1.1 |
Related products
-
ASTM-A473 2001
A473-01 Standard Specification for Stainless Steel Forgings Published By Publication Date Number of Pages ASTM…
-
ASTM-A653 2006
A653/A653M-06 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…
-
ASTM-A67 2005
A67-00(2005) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked Published By Publication Date…
-
ASTM-A623 2006
A623-06a Standard Specification for Tin Mill Products, General Requirements Published By Publication Date Number of…
-
ASTM-A677 2005
A677-05e1 Standard Specification for Nonoriented Electrical Steel Fully Processed Types Published By Publication Date Number…
-
ASTM-A653 2009
A653/A653M-09 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…
-
ASTM-A683 2005
A683-05e1 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types Published By Publication Date Number of…
-
ASTM-A677 2007
A677-07 Standard Specification for Nonoriented Electrical Steel Fully Processed Types Published By Publication Date Number…
-
ASTM-A473 2009(Redline)
A473-01(2009) Standard Specification for Stainless Steel Forgings (Redline) Published By Publication Date Number of Pages…
-
ASTM-A623 2002
A623-02 Standard Specification for Tin Mill Products, General Requirements Published By Publication Date Number of…
-
ASTM-A693 2006(Redline)
A693-06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip (Redline) Published…
-
ASTM-A693 2001
A693-01 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip Published By…
-
ASTM-A673 2005
A673/A673M-05 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel Published By Publication…
-
ASTM-E673 2002
E673-02 Standard Terminology Relating to Surface Analysis Published By Publication Date Number of Pages ASTM…
-
ASTM-A653 2000
A653/A653M-00 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…
-
ASTM-A633 2006
A633/A633M-01(2006) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates Published By Publication Date Number…
-
ASTM-B673 2005
B673-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe Published By…
-
ASTM-A633 2001
A633/A633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates Published By Publication Date Number…
-
ASTM-A623 2006
A623-06 Standard Specification for Tin Mill Products, General Requirements Published By Publication Date Number of…
-
ASTM-A675 2003
A675/A675M-03e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties Published By Publication…
-
ASTM-A763 2004
A763-93(2004) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels Published By…
-
ASTM-A653 2005
A653/A653M-05a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…
-
ASTM-A673 2007
A673/A673M-07 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel Published By Publication…
-
ASTM-A672 2006
A672-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures Published By…
-
ASTM-A693 2006
A693-06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip Published By…
-
ASTM-A573 2009(Redline)
A573/A573M-05(2009) Standard Specification for Structural Carbon Steel Plates of Improved Toughness (Redline) Published By Publication…
-
ASTM-A674 2005
A674-05 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids…
-
ASTM-A673 2004
A673/A673M-04 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel Published By Publication…
-
ASTM-B673 2005
B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe Published By…
-
ASTM-A672 2005
A672-96(2005) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures Published By…
-
ASTM-A653 2005
A653/A653M-05 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…
-
ASTM-A675 2009
A675/A675M-03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties Published By Publication…
-
ASTM-A973 2007
A973/A973M-07 Standard Specification for Grade 100 Alloy Steel Chain Published By Publication Date Number of…
-
ASTM-A573 2005
A573/A573M-05 Standard Specification for Structural Carbon Steel Plates of Improved Toughness Published By Publication Date…
-
ASTM-A623 2009
A623-09 Standard Specification for Tin Mill Products, General Requirements Published By Publication Date Number of…
-
ASTM-A683 2005
A683-05 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types Published By Publication Date Number of…
-
ASTM-A677 2005
A677-05 Standard Specification for Nonoriented Electrical Steel Fully Processed Types Published By Publication Date Number…
-
ASTM-A623 2005
A623-05 Standard Specification for Tin Mill Products, General Requirements Published By Publication Date Number of…
-
ASTM-A675 2009(Redline)
A675/A675M-03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties (Redline) Published By…
-
ASTM-A473 2015(Redline)
A473-15 Standard Specification for Stainless Steel Forgings (Redline) Published By Publication Date Number of Pages…
