ASTM-B609 2012

$40.63

B609/B609M-12 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

Published By	Publication Date	Number of Pages
ASTM	2012	5

Guaranteed Safe Checkout

Categories: 77.150.10 - Aluminium products, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM B609/B609M-12

Historical Standard: Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

ASTM B609/B609M

Scope

1.1 This specification covers aluminum 1350-O (annealed), 1350-H12 or -H22 (¼ hard), 1350-H14 or -H24 (½ hard), 1350-H16 or -H26 (¾ hard) and 1350-H142 or -H242 (½ hard), suitable for stranding into conductors or for solid single conductors, either bare or insulated (see Table 1 or Table 2).

1.2 The values stated in inch-pound units or SI units are to be regarded separately as standard. The values in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.2.1 For density, resistivity, and temperature, the values stated in SI units are to be regarded as standard.

Note 1—Prior to 1975, aluminum 1350 was designated as EC-aluminum.

Note 2—The aluminum and temper designations conform to ANSI H35.1. Aluminum 1350 corresponds to Unified Numbering System A91350 in accordance with Practice E527.

TABLE 1 Standard Nominal Diameters, Cross-Sectional Areas, and Mass Per Unit Length of Solid Round Aluminum Wires and Conductors at 20°C AWG or cmil Sizes

Note—Metric values listed as follows represent a soft conversion and as such they may not be the same as those metric mass per unit length which are calculated from the basic metric density. Conversion factors: 1 lb/1000 ft = 1.488 ft + 00 kg/km 1 in. = 25.4 mm

TABLE 2 Standard Nominal Diameters, Cross-Sectional Areas, and Mass per Unit Length of Solid Round Aluminum Wires and Conductors at 20°C

Note—The data in Table 2 were extracted in part from Specification B682.

Keywords

aluminum electrical conductors; aluminum 1350 round wire-annealed and intermediate tempers; aluminum 1350 wire; aluminum wire; electrical conductors; electrical conductors-aluminum; Aluminum electrical conductors–specifications; Annealed aluminum materials; Intermediate temper aluminum electrical conductors; Round aluminum electrical wire; UNS A91350 (Wr. alum. alloy)–wire (electrical)

ICS Code

ICS Number Code 77.150.10 (Aluminium products)

DOI: 10.1520/B0609_B0609M-12

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents Terminology Ordering Information
2	Materials and Manufacture Workmanship, Finish and Appearance Tensile Properties TABLE 1
3	Bending Properties Resistivity Density Diameter Joints Sampling TABLE 2 TABLE 3 TABLE 4
4	Test Methods Inspection Packaging and Package Marking TABLE 5
5	Keywords

Additional information

2.50	4.91
1.80	2.55
25	17.9
500 000	707.1
24	20.1
5.00	19.6
23	22.6
250 000	500.0
450 000	670.8
0.315	0.0779
27	14.2
12.5	123.0
21	28.5
18.0	255.0
20	32.0
9	114.4
8	128.5
28	12.6
1.25	1.23
22	25.3
29	11.3
11.2	98.5
0.355	0.0990
0.630	0.312
8.00	50.3
2.24	3.94
1.12	0.985
0.710	0.396
300 000	547.7
30	10.0
4.00	12.6
0.280	0.0616
1.40	1.54
9.00	63.6
0.400	0.126
0.560	0.246
1.00	0.785
7	144.3
26	15.9
0.800	0.503
4.50	15.9
0.500	0.196
16	50.8
14	64.1
13	72.0
12	80.8
11	90.7
10	101.9
350 000	591.6
10.0	78.5
0000	460.0
15	57.1
6.30	31.2
5.60	24.6
0.900	0.636
1.60	2.01
00	364.8

400 000	632.5
1	289.3
7.10	39.6
16.0	201.0
2.80	6.16
0.250	0.0491
5	181.9
4	204.3
3	229.4
14.0	154.0
2	257.6
17	45.3
ICS Codes	77.150.10 - Aluminium products
6	162.0
000	409.6
3.55	9.90
0.450	0.159
2.00	3.14
3.15	7.79
19	35.9
18	40.3