ASTM-C873 2004
$35.75
C873/C873M-04e1 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
| Published By | Publication Date | Number of Pages |
| ASTM | 2004 | 4 |
1.1 This test method covers the determination of strength of cylindrical concrete specimens that have been molded in place using special molds attached to formwork. This test method is limited to use in slabs where the depth of concrete is from 5 to 12 in. [125 to 300 mm].
1.2 The values stated in either inch-pounds or SI units shall be regarded separately as standard. SI units are shown in brackets. The values stated may not be exact equivalents, therefore each system must be used independently of the other. Combining values of the two units may result in nonconformance.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ( Warning Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure. )
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Summary of Test Method Significance and Use |
| 2 | Apparatus FIG. 1 |
| 3 | Installation of Apparatus Procedure Calculation Report |
| 4 | Precision and Bias Keywords |
Related products
-
ASTM-C823 2007
C823/C823M-07 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions Published By Publication…
-
ASTM-C273 2000
C273-00e1 Standard Test Method for Shear Properties of Sandwich Core Materials Published By Publication Date…
-
ASTM-C879 2003
C879-03 Standard Test Methods for Release Papers Used With Preformed Tape Sealants Published By Publication…
-
ASTM-C874 2009
C874-99(2009) Standard Practice for Rotary Slag Testing of Refractory Materials Published By Publication Date Number…
-
ASTM-C877 2001
C877-01 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections…
-
ASTM-C973 2004
C973-87(2004) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing Published…
-
ASTM-C373 2014(Redline)
C373-14 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-E873 2024
E873-24 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels Published By Publication…
-
ASTM-C833 2008(Redline)
C833-01(2008) Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets (Redline) Published By Publication Date Number of…
-
ASTM-C473 2005
C473-05 Standard Test Methods for Physical Testing of Gypsum Panel Products Published By Publication Date…
-
ASTM-C373 2014
C373-14a Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-C837 2009
C837-09 Standard Test Method for Methylene Blue Index of Clay Published By Publication Date Number…
-
ASTM-C273 2007
C273/C273M-07a Standard Test Method for Shear Properties of Sandwich Core Materials Published By Publication Date…
-
ASTM-C837 2009(Redline)
C837-09 Standard Test Method for Methylene Blue Index of Clay (Redline) Published By Publication Date…
-
ASTM-C878 2009(Redline)
C878/C878M-09 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete (Redline) Published By Publication Date…
-
ASTM-D873 2002
D873-02 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) Published By…
-
ASTM-C473 2007
C473-07 Standard Test Methods for Physical Testing of Gypsum Panel Products Published By Publication Date…
-
ASTM-C863 2000
C863-00 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures…
-
ASTM-C877 2000
C877-00 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections…
-
ASTM-C878 2009
C878/C878M-09 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete Published By Publication Date Number…
-
ASTM-C877 2008
C877-08 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections…
-
ASTM-C837 2003
C837-99(2003) Standard Test Method for Methylene Blue Index of Clay Published By Publication Date Number…
-
ASTM-C879 2009(Redline)
C879-03(2009) Standard Test Methods for Release Papers Used With Preformed Tape Sealants (Redline) Published By…
-
ASTM-C873 2004
C873-04 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical…
-
ASTM-C673 2003
C673-97(2003) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes Published By Publication…
-
ASTM-C273 2007
C273/C273M-07 Standard Test Method for Shear Properties of Sandwich Core Materials Published By Publication Date…
-
ASTM-C870 2004
C870-96(2004) Standard Practice for Conditioning of Thermal Insulating Materials Published By Publication Date Number of…
-
ASTM-C973 2009
C973-87(2009) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing Published…
-
ASTM-C373 2014(Redline)
C373-14a Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-C874 2004
C874-99(2004) Standard Practice for Rotary Slag Testing of Refractory Materials Published By Publication Date Number…
-
ASTM-C843 2006
C843-99(2006) Standard Specification for Application of Gypsum Veneer Plaster Published By Publication Date Number of…
-
ASTM-C87 2004
C87-04 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of…
-
ASTM-C373 2014
C373-14 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-C473 2003
C473-03 Standard Test Methods for Physical Testing of Gypsum Panel Products Published By Publication Date…
-
ASTM-C870 2024
C870-24 Standard Practice for Conditioning of Thermal Insulating Materials Published By Publication Date Number of…
-
ASTM-C879 2009
C879-03(2009) Standard Test Methods for Release Papers Used With Preformed Tape Sealants Published By Publication…
-
ASTM-E873 2024(Redline)
E873-24 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels (Redline) Published By…
-
ASTM-C823 2000
C823-00 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions Published By Publication…
-
ASTM-C875 2014
C875-98(2014) Standard Specification for Asbestos-Cement Conduit Published By Publication Date Number of Pages ASTM 2014…
-
ASTM-C870 2000
C870-96(2000) Standard Practice for Conditioning of Thermal Insulating Materials Published By Publication Date Number of…
