ASTM-C873 2010
$35.75
C873/C873M-10a Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
| Published By | Publication Date | Number of Pages |
| ASTM | 2010 | 4 |
1.1 This test method covers the determination of strength of cylindrical concrete specimens that have been molded in place using special molds attached to formwork. This test method is limited to use in slabs where the depth of concrete is from 125 to 300 mm [5 to 12 in.].
1.2 Units The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ( Warning Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure. )
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Summary of Test Method Significance and Use |
| 2 | Apparatus FIG. 1 |
| 3 | Installation of Apparatus Procedure Calculation Report |
| 4 | Precision and Bias Keywords |
Related products
-
ASTM-C843 2012
C843-99(2012) Standard Specification for Application of Gypsum Veneer Plaster Published By Publication Date Number of…
-
ASTM-C473 2012
C473-12 Standard Test Methods for Physical Testing of Gypsum Panel Products Published By Publication Date…
-
ASTM-C873 2010(Redline)
C873/C873M-10a Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical…
-
ASTM-C874 2011
C874-11 Standard Practice for Rotary Slag Testing of Refractory Materials Published By Publication Date Number…
-
ASTM-C870 2000
C870-96(2000) Standard Practice for Conditioning of Thermal Insulating Materials Published By Publication Date Number of…
-
ASTM-C373 2014(Redline)
C373-14a Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-C273 2011
C273/C273M-11 Standard Test Method for Shear Properties of Sandwich Core Materials Published By Publication Date…
-
ASTM-C773 2016
C773-88(2016) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials Published By Publication…
-
ASTM-C73 2010
C73-10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) Published By Publication Date Number of…
-
ASTM-C87 2010
C87/C87M-10 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of…
-
ASTM-E873 2013
E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels Published By Publication…
-
ASTM-C874 2020
C874-20 Standard Test Method for Rotary Slag Testing of Refractory Materials Published By Publication Date…
-
ASTM-C373 2014
C373-14a Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-C783 2015
C783-85(2015) Standard Practice for Core Sampling of Graphite Electrodes Published By Publication Date Number of…
-
ASTM-C87/C87M 2017
C87/C87M-17 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of…
-
ASTM-D873 2012
D873-12 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) Published By…
-
ASTM-C803 2010
C803/C803M-03(2010) Standard Test Method for Penetration Resistance of Hardened Concrete Published By Publication Date Number…
-
ASTM-C875 2014
C875-98(2014) Standard Specification for Asbestos-Cement Conduit Published By Publication Date Number of Pages ASTM 2014…
-
ASTM-C863 2000
C863-00 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures…
-
ASTM-C783 2010
C783-85(2010)e1 Standard Practice for Core Sampling of Graphite Electrodes Published By Publication Date Number of…
-
ASTM-C87/C87M 2017(Redline)
C87/C87M-17 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of…
-
ASTM-C373 2014(Redline)
C373-14 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-C473 2017(Redline)
C473-17 Standard Test Methods for Physical Testing of Gypsum Panel Products (Redline) Published By Publication…
-
ASTM-C873 2010
C873/C873M-10 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical…
-
ASTM-C373 2014
C373-14 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity…
-
ASTM-C863 2010
C863-00(2010) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures…
-
ASTM-C373 2018
C373-18 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method…
-
ASTM-C872 2010
C872-10 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces Published By…
-
ASTM-C872 2015
C872-10(2015) Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces Published By…
-
ASTM-C873/C873M 2015
C873/C873M-15 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical…
-
ASTM-C473 2010
C473-10 Standard Test Methods for Physical Testing of Gypsum Panel Products Published By Publication Date…
-
ASTM-C87 2010(Redline)
C87/C87M-10 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of…
-
ASTM-B873 2012(Redline)
B873-12 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods…
-
ASTM-C373 2016
C373-16 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method…
-
ASTM-C863 2016
C863-00(2016) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures…
-
ASTM-C873/C873M 2015(Redline)
C873/C873M-15 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical…
-
ASTM-C473 2019
C473-19 Standard Test Methods for Physical Testing of Gypsum Panel Products Published By Publication Date…
-
ASTM-B873 2017(Redline)
B873-17 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods…
-
ASTM-C823 2000
C823-00 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions Published By Publication…
-
ASTM-C73 2010(Redline)
C73-10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) (Redline) Published By Publication Date Number…
