ASTM-D2361:2001 Edition
$35.75
D2361-95(2001) Standard Test Method for Chlorine in Coal
Published By | Publication Date | Number of Pages |
ASTM | 2001 | 3 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. Weāre here to assist you 24/7.
Email:[email protected]
ASTM D2361-95-Reapproved2001
Historical Standard: Standard Test Method for Chlorine in Coal
ASTM D2361
Scope
1.1 This test method pertains to the determination of total chlorine content in a coal sample.
1.2 The values stated in SI units are regarded as the standard. The values shown in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Note 2 and Section 8.
Keywords
chlorine content; coal; coal products; combustion bomb method
ICS Code
ICS Number Code 75.160.10 (Solid fuels)
DOI: 10.1520/D2361-95R01
Standard Title | D2361-95(2001) Standard Test Method for Chlorine in Coal |
---|---|
Published Code | ASTM |
Publication Date | 2001 |
Pages Count | 3 |
ICS Codes | 75.160.10 - Solid fuels |
This document does not provide a preview.
Related products
-
ASTM-D2561:2023 Edition
D2561-17(2023) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers Published By Publicationā¦
-
ASTM-D3261:2012 Edition
D3261-12e1 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plasticā¦
-
ASTM-D2261:2024 Edition
D2261-13(2024) Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedureā¦
-
ASTM-E2361:2013 Edition
E2361-13 Standard Guide for Testing Leave-On Products Using In-Situ Methods Published By Publication Date Numberā¦
-
ASTM-D2161:2016 Edition
D2161-10(2016) Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Sayboltā¦
-
ASTM-D7361:2007 Edition
D7361-07 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superpositionā¦
-
ASTM-D2316:1984 Edition
D2316-75(1984) Recommended Practice for Installing Bituminized Fiber Drain and Sewer Pipe (Withdrawn 1990) Published Byā¦
-
ASTM-D2661:2011 Edition(Redline)
D2661-11 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe andā¦
-
ASTM-D2561:1995 Edition
D2561-95 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers Published By Publicationā¦
-
ASTM-D4361:2010 Edition(Redline)
D4361-10 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Rollerā¦
-
ASTM-D2061:2003 Edition
D2061-03 Standard Test Methods for Strength Tests for Zippers Published By Publication Date Number ofā¦
-
ASTM-D5361:2011 Edition(Redline)
D5361/D5361M-11a Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing (Redline) Published By Publicationā¦
-
ASTM-D2161:2020 Edition(Redline)
D2161-20 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Sayboltā¦
-
ASTM-D5361:2005 Edition
D5361-05 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing Published By Publication Dateā¦
-
ASTM-D2261:2011 Edition
D2261-11 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedureā¦
-
ASTM-D3261:2012 Edition
D3261-12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plasticā¦
-
ASTM-D3261:2024 Edition
D3261-24 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plasticā¦
-
ASTM-D2261:2002 Edition
D2261-96(2002) Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedureā¦
-
ASTM-D2361:1995 Edition
D2361-95 Standard Test Method for Chlorine in Coal Published By Publication Date Number of Pagesā¦
-
ASTM-D2661:2008 Edition
D2661-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe andā¦
-
ASTM-D2661:1991 Edition
D2661-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe andā¦
-
ASTM-D2316:1975 Edition
D2316-75 Standard Recommended Practice for Installing Bituminized Fiber Drain And Sewer Pipe Published By Publicationā¦
-
ASTM-D2861:1998 Edition
D2861-87(1998) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treatedā¦
-
ASTM-D2561:2005 Edition
D2561-95(2005) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers Published By Publicationā¦
-
ASTM-D2321:2011 Edition(Redline)
D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applicationsā¦
-
ASTM-D2561:2001 Edition
D2561-95(2001) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers Published By Publicationā¦
-
ASTM-D2301:2004 Edition
D2301-99(2004) Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape Published By Publication Dateā¦
-
ASTM-D2321:2020 Edition
D2321-20 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applicationsā¦
-
ASTM-F2361:2003 Edition
F2361-03 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motorsā¦
-
ASTM-E2361:2004 Edition
E2361-04 Standard Guide for Testing Leave-On Products Using In-Situ Methods Published By Publication Date Numberā¦
-
ASTM-D2341:1981 Edition
D2341-81 Specification for Rigid Urethane Foam (Withdrawn 1988) Published By Publication Date Number of Pagesā¦
-
ASTM-D2061:2021 Edition
D2061-07(2021) Standard Test Methods for Strength Tests for Zippers Published By Publication Date Number ofā¦
-
ASTM-D4361:2009 Edition
D4361-09 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Rollerā¦
-
ASTM-D2861:2009 Edition
D2861-87(2009) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treatedā¦
-
ASTM-D2381:1999 Edition
D2381-87(1999)e1 Standard Test Methods for Flexible Composite Materials Used for Electrical Insulation (Withdrawn 2005) Publishedā¦
-
ASTM-D2961:2001 Edition
D2961-01 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced toā¦
-
ASTM-D2361:2002 Edition
D2361-02 Standard Test Method for Chlorine in Coal (Withdrawn 2008) Published By Publication Date Numberā¦
-
ASTM-D2661:2006 Edition
D2661-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe andā¦
-
ASTM-D3261:2016 Edition(Redline)
D3261-16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plasticā¦
-
ASTM-D7361:2023 Edition
D7361-07(2023) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superpositionā¦