ASTM-D5008 2007
$35.75
D5008-07 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
| Published By | Publication Date | Number of Pages |
| ASTM | 2007 | 4 |
1.1 This test method covers the determination of ethyl methyl pentanol content and purity value of 2-ethylhexanol.
1.2 Water and acid cannot be determined by this test method and must be determined in accordance with Test Methods D 1613 and E 203 and those results used to normalize the chromatographic data.
1.3 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off ‘to the nearest unit’ in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see 6.1.1.
1.5 For hazard information and guidance, see the supplier’s Material Safety Data Sheet.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Summary of Test Method Significance and Use Apparatus |
| 2 | Reagents and Materials Calibration and Standardization TABLE 1 |
| 3 | Procedure Calculation Report Precision and Bias Keywords |
Related products
-
ASTM-D5708 2000
D5708-00 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and…
-
ASTM-D5003 2006
D5003-06 Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke Published By…
-
ASTM-D5002 2005
D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density…
-
ASTM-D5080 2017(Redline)
D5080-17 Standard Test Method for Rapid Determination of Percent Compaction (Redline) Published By Publication Date…
-
ASTM-D5508 2001
D5508-94a(2001)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and…
-
ASTM-D5003 2017
D5003-06a(2017) Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke Published By Publication…
-
ASTM-D5048 2009(Redline)
D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of…
-
ASTM-D5004 2017
D5004-11(2017) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement Published…
-
ASTM-D5008 2001
D5008-01 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By…
-
ASTM-D5000 2005(Redline)
D5000-05 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor (Redline) Published…
-
ASTM-D5007 2003
D5007-99(2003) Standard Test Method for Wet-to-Dry Hiding Change Published By Publication Date Number of Pages…
-
ASTM-D5608 2001
D5608-01 Standard Practice for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites…
-
ASTM-D5808 2009(Redline)
D5808-09a Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry…
-
ASTM-D5004 2009
D5004-89(2009) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement Published…
-
ASTM-D5088 2008
D5088-02(2008) Standard Practice for Decontamination of Field Equipment Used at Waste Sites Published By Publication…
-
ASTM-D2008 2001
D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products Published By Publication…
-
ASTM-D5208 2001
D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics Published By Publication Date…
-
ASTM-D5028 2009(Redline)
D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis (Redline) Published…
-
ASTM-D4008 2009
D4008-95(2009) Standard Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for…
-
ASTM-D5009 2002
D5009-96(2002) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under…
-
ASTM-D5808 2009
D5808-09a Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry…
-
ASTM-D5007 2017
D5007-99(2017) Standard Test Method for Wet-to-Dry Hiding Change Published By Publication Date Number of Pages…
-
ASTM-D5068 2004
D5068-04 Standard Practice for Preparation of Paint Brushes for Evaluation Published By Publication Date Number…
-
ASTM-D5009 2017
D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under…
-
ASTM-D5058 2007
D5058-90(2007) Standard Test Methods for Compatibility of Screening Analysis of Waste Published By Publication Date…
-
ASTM-D7008 2008
D7008-08 Standard Specification for Geosynthetic Alternate Daily Covers Published By Publication Date Number of Pages…
-
ASTM-D5006 2003
D5006-03 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation…
-
ASTM-D5080 2000
D5080-00 Standard Test Method for Rapid Determination of Percent Compaction Published By Publication Date Number…
-
ASTM-D5808 2003
D5808-03 Standard Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by…
-
ASTM-D2008 2006
D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products Published By Publication…
-
ASTM-D5078 2000
D5078-95(2000) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements…
-
ASTM-D5068 2009(Redline)
D5068-04(2009) Standard Practice for Preparation of Paint Brushes for Evaluation (Redline) Published By Publication Date…
-
ASTM-D2008 2009
D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products Published By Publication…
-
ASTM-D5003 2005
D5003-95(2005) Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke Published By…
-
ASTM-D5028 2003
D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis Published By…
-
ASTM-D5508 2009
D5508-94a(2009)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and…
-
ASTM-D5098 2005
D5098-05 Standard Specification for Artists’ Acrylic Dispersion Paints Published By Publication Date Number of Pages…
-
ASTM-D5028 2003
D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis Published By…
-
ASTM-D5088 2002
D5088-02 Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites Published By…
-
ASTM-D5003 2000
D5003-95(2000)e1 Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke Published By…
