ASTM-D5211:2007 Edition
$35.75
D5211-07 Standard Specification for Xylenes for p-Xylene Feedstock
Published By | Publication Date | Number of Pages |
ASTM | 2007 | 2 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This specification covers xylenes for p -xylene feedstock. These xylenes typically are extracted from reformate.
1.2 The following applies to all specified limits in this specification: for purposes of determining conformance with this specification, an observed value or calculated value shall be rounded off ‘to the nearest unit’ in the last right hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 Consult current OSHA regulations, suppliers’ Material Safety Data Sheets (MSDS), and local regulations for all materials used in this specification.
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | Scope Referenced Documents Properties |
2 | Sampling Keywords |
Standard Title | D5211-07 Standard Specification for Xylenes for <i>p</i>-Xylene Feedstock |
---|---|
Published Code | ASTM |
Publication Date | 2007 |
Pages Count | 2 |
ICS Codes | 71.080.15 - Aromatic hydrocarbons |
This document does not provide a preview.
Related products
-
ASTM-D5211:2011 Edition
D5211-11 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5212:1997 Edition
D5212-91(1997) Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures Published…
-
ASTM-D2211:2015 Edition
D2211-00(2015) Standard Test Method for Elongation of Leather Published By Publication Date Number of Pages…
-
ASTM-D5211:2009 Edition
D5211-09 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D7211:2013 Edition
D7211-13 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use Published…
-
ASTM-D5511:2002 Edition
D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions…
-
ASTM-D5121:1995 Edition
D5121-90(1995) Standard Practice for Preparation of Rock Slabs for Durability Testing Published By Publication Date…
-
ASTM-D7211:2006 Edition(Redline)
D7211-06 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use (Redline)…
-
ASTM-D5211:2012 Edition
D5211-12 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5121:2010 Edition(Redline)
D5121-10 Standard Practice for Preparation of Rock Slabs for Durability Testing (Redline) Published By Publication…
-
ASTM-D5211:2019 Edition(Redline)
D5211-19 Standard Specification for Xylenes for p-Xylene Feedstock (Redline) Published By Publication Date Number of…
-
ASTM-D5211:2019 Edition
D5211-19 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5811:2020 Edition(Redline)
D5811-20 Standard Test Method for Strontium-90 in Water (Redline) Published By Publication Date Number of…
-
ASTM-D5211:2016 Edition
D5211-16 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5211:2010 Edition
D5211-10 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5216:1998 Edition
D5216-98 Standard Specification for Propylene Glycol Base Engine Coolant for Automobile and Light-Duty Service (Withdrawn…
-
ASTM-D2511:2009 Edition
D2511-93(2009) Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants Published By Publication…
-
ASTM-D5211:2017 Edition(Redline)
D5211-17 Standard Specification for Xylenes for p-Xylene Feedstock (Redline) Published By Publication Date Number of…
-
ASTM-D2511:2014 Edition(Redline)
D2511-93(2014) Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants (Redline) Published By…
-
ASTM-D5011:2017 Edition(Redline)
D5011-17 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards (Redline) Published By Publication…
-
ASTM-D5121:2001 Edition
D5121-90(2001) Standard Practice for Preparation of Rock Slabs for Durability Testing Published By Publication Date…
-
ASTM-D5211:2016 Edition(Redline)
D5211-16 Standard Specification for Xylenes for p-Xylene Feedstock (Redline) Published By Publication Date Number of…
-
ASTM-D5511:2018 Edition(Redline)
D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions…
-
ASTM-D8211:2018 Edition
D8211-18 Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface Published…
-
ASTM-D5711:2003 Edition(Redline)
D5711-03 Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Redline) Published By…
-
ASTM-D5211:2000 Edition
D5211-00 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5219:2009 Edition(Redline)
D5219-09 Standard Terminology Relating to Body Dimensions for Apparel Sizing (Redline) Published By Publication Date…
-
ASTM-D5211:2006 Edition
D5211-06 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5231:2008 Edition
D5231-92(2008) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste Published…
-
ASTM-D8211:2021 Edition(Redline)
D8211-21 Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface (Redline)…
-
ASTM-D7211:2018 Edition
D7211-13(2018) Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use Published…
-
ASTM-D2511:2020 Edition(Redline)
D2511-20 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants (Redline) Published By…
-
ASTM-D5211:2012 Edition(Redline)
D5211-12 Standard Specification for Xylenes for p-Xylene Feedstock (Redline) Published By Publication Date Number of…
-
ASTM-D5211:2017 Edition
D5211-17 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5211:2001 Edition
D5211-01 Standard Specification for Xylenes for p-Xylene Feedstock Published By Publication Date Number of Pages…
-
ASTM-D5213:2012 Edition(Redline)
D5213-12 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications (Redline) Published…
-
ASTM-D5111:2006 Edition
D5111-99(2006) Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban…
-
ASTM-D5213:2004 Edition
D5213-04 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications Published By…
-
ASTM-D5201:2020 Edition
D5201-05a(2020) Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings Published By Publication…
-
ASTM-D5911:2002 Edition
D5911-96(2002)e1 Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site…