ASTM-D5357 2008
$35.75
D5357-03(2008)e1 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
| Published By | Publication Date | Number of Pages |
| ASTM | 2008 | 3 |
1.1 This test method covers a procedure for determining the relative crystallinity of zeolite sodium A (zeolite NaA) using selected peaks from the X-ray diffraction pattern of the zeolite.
1.2 The term intensity of an X-ray powder diffraction (XRD) peak refers to the integral intensity, either the area or counts under the peak or the product of the peak height and the peak width at half height.
1.3 This test method provides a number that is the ratio of intensity of portions of the XRD pattern of the sample to intensity of the corresponding portion of the pattern of a reference zeolite NaA. The intensity ratio, expressed as a percentage, is then labeled relative crystallinity of NaA.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Summary of Test Method Significance and Use Apparatus |
| 2 | Reagents and Materials Procedure Calculation FIG. 1 |
| 3 | Report Precision and Bias Keywords |
Related products
-
ASTM-D5857 2009
D5857-09 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D3557 2002
D3557-02 Standard Test Methods for Cadmium in Water Published By Publication Date Number of Pagesā¦
-
ASTM-D5857 2002
D5857-02a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D5347 2006
D5347-95(2006) Standard Test Method for Determination of the Ash Content of Fats and Oils Publishedā¦
-
ASTM-D5757 2000
D5757-00 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Airā¦
-
ASTM-D5358 2003
D5358-93(2003) Standard Practice for Sampling with a Dipper or Pond Sampler Published By Publication Dateā¦
-
ASTM-D5357 2008(Redline)
D5357-03(2008)e1 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-rayā¦
-
ASTM-D5355 2001
D5355-95(2001) Standard Test Method for Specific Gravity of Oils and Liquid Fats Published By Publicationā¦
-
ASTM-D5657 2007(Redline)
D5657-07 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners (Redline)ā¦
-
ASTM-D5359 2004
D5359-98(2004) Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glassā¦
-
ASTM-D5353 2006
D5353-95(2006) Standard Test Method for Determination of Total Desulfated Fatty Matter Published By Publication Dateā¦
-
ASTM-D5857 2002
D5857-02 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D5355 2006
D5355-95(2006) Standard Test Method for Specific Gravity of Oils and Liquid Fats Published By Publicationā¦
-
ASTM-D3557 2007(Redline)
D3557-02(2007)e1 Standard Test Methods for Cadmium in Water (Redline) Published By Publication Date Number ofā¦
-
ASTM-D5537 2008
D5537-08 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testingā¦
-
ASTM-D5350 2001
D5350-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Methodā¦
-
ASTM-D5358 2009
D5358-93(2009) Standard Practice for Sampling with a Dipper or Pond Sampler Published By Publication Dateā¦
-
ASTM-D5367 2008
D5367-08 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Preventā¦
-
ASTM-D5397 2005
D5397-99(2005) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notchedā¦
-
ASTM-D5557 2001
D5557-95(2001) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Usedā¦
-
ASTM-D5657 2007
D5657-07 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners Publishedā¦
-
ASTM-D5857 2002
D5857-02e1 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D5857 2008
D5857-08 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D5327 2002
D5327-97(2002) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Generalā¦
-
ASTM-D5537 2018(Redline)
D5537-18 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testingā¦
-
ASTM-D5337 2004
D5337-04 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps Published By Publicationā¦
-
ASTM-D5350 2006
D5350-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Methodā¦
-
ASTM-D5356 2009
D5356-93(2009) Standard Test Method for PH of Chrome Tanning Solutions Published By Publication Date Numberā¦
-
ASTM-D5357 2003
D5357-03 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Rayā¦
-
ASTM-D5857 2004
D5857-04 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D5857 2005
D5857-05 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D5352 2001
D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method Cā¦
-
ASTM-D5377 2007
D5377-93(2007) Standard Classification for Rubber Compounding Materials—Ground Coal Published By Publication Date Number of Pagesā¦
-
ASTM-D3557 2007
D3557-02(2007)e1 Standard Test Methods for Cadmium in Water Published By Publication Date Number of Pagesā¦
-
ASTM-D7357 2007
D7357-07 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete Published By Publication Date Number ofā¦
-
ASTM-D5457 2004
D5457-04a Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Loadā¦
-
ASTM-D2357 2003
D2357-74(2003) Standard for Qualitative Classification of Surfactants by Infrared Absorption Published By Publication Date Numberā¦
-
ASTM-D5857 2001
D5857-01 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Publishedā¦
-
ASTM-D5367 2008(Redline)
D5367-08 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Preventā¦
-
ASTM-D5307 2007
D5307-97(2007) Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gasā¦
