ASTM-D5887 2008
$31.25
D5887-08 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
| Published By | Publication Date | Number of Pages |
| ASTM | 2008 | 7 |
1.1 This test method covers an index test that covers laboratory measurement of flux through saturated geosynthetic clay liner (GCL) specimens using a flexible wall permeameter.
1.2 This test method is applicable to GCL products having geotextile backing(s). It may not be applicable to GCL products with geomembrane backing(s).
1.3 This test method provides a measurement of flux under a prescribed set of conditions that can be used for manufacturing quality control. The test method can also be used to check conformance. The flux value determined using this test method is not considered to be representative of the in-service flux of GCLs.
1.4 The values stated in SI units are to be regarded as the standard, unless other units are specifically given.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method Significance and Use |
| 2 | Apparatus |
| 3 | FIG. 1 |
| 4 | Reagents Test Specimen Preparation Procedure |
| 5 | Calculation Report Precision and Bias Keywords |
| 6 | X1. IN-SERVICE GCL FLUX DETERMINATION X1.1 X1.2 X1.3 X1.4 X1.5 X1.6 X1.7 X1.8 X1.9 X2. CALCULATION OF HYDRAULIC CONDUCTIVITY USING INDEX FLUX TEST DATA X2.1 X2.2 X2.3 |
| 7 | X2.4 X2.5 X2.6 |
Related products
-
ASTM-D5587 2005
D5587-05 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure Published By Publication…
-
ASTM-D5886 2001
D5886-95(2001) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through…
-
ASTM-D5587 2008
D5587-08 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure Published By Publication…
-
ASTM-D5878 2008(Redline)
D5878-08 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes (Redline) Published By Publication…
-
ASTM-D5857 2004
D5857-04 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Published…
-
ASTM-D5587 2003
D5587-03 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure Published By Publication…
-
ASTM-D5087 2008(Redline)
D5087-02(2008) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne…
-
ASTM-D5287 2008
D5287-08 Standard Practice for Automatic Sampling of Gaseous Fuels Published By Publication Date Number of…
-
ASTM-D5887 2009
D5887-09 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens…
-
ASTM-D5807 2008
D5807-08 Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions Published By Publication…
-
ASTM-D5883 2008
D5883-96(2008) Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS)…
-
ASTM-D5887 2009(Redline)
D5887-09 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens…
-
ASTM-D5587 2008(Redline)
D5587-08 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure (Redline) Published By…
-
ASTM-D5827 2002
D5827-95(2002) Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by…
-
ASTM-D2887 2008
D2887-08 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography Published…
-
ASTM-D5087 2008
D5087-02(2008) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne…
-
ASTM-D5807 2018(Redline)
D5807-18 Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions (Redline) Published By…
-
ASTM-D5889 2008
D5889-97(2008) Standard Practice for Quality Control of Geosynthetic Clay Liners Published By Publication Date Number…
-
ASTM-D2887 2008(Redline)
D2887-08 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography (Redline)…
-
ASTM-D3887 2004
D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics Published By Publication Date Number of Pages…
-
ASTM-D3887 2008
D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics Published By Publication Date Number of Pages…
-
ASTM-D5857 2002
D5857-02 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Published…
-
ASTM-D5787 2009
D5787-95(2009) Standard Practice for Monitoring Well Protection Published By Publication Date Number of Pages ASTM…
-
ASTM-D5287 2008(Redline)
D5287-08 Standard Practice for Automatic Sampling of Gaseous Fuels (Redline) Published By Publication Date Number…
-
ASTM-D5883 2002
D5883-96(2002) Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS)…
-
ASTM-D5887 2004
D5887-04 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens…
-
ASTM-D5847 2007
D5847-02(2007) Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis…
-
ASTM-D887 2008(Redline)
D887-08 Standard Practices for Sampling Water-Formed Deposits (Redline) Published By Publication Date Number of Pages…
-
ASTM-D5827 2009(Redline)
D5827-09e1 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by…
-
ASTM-D5857 2002
D5857-02a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Published…
-
ASTM-D5807 2008(Redline)
D5807-08 Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions (Redline) Published By…
-
ASTM-D5884 2004
D5884-04a Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes Published By Publication…
-
ASTM-D5889 2003
D5889-97(2003) Standard Practice for Quality Control of Geosynthetic Clay Liners Published By Publication Date Number…
-
ASTM-D6887 2008
D6887-03(2008) Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions Published By…
-
ASTM-D5857 2008
D5857-08 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology Published…
-
ASTM-D5882 2007(Redline)
D5882-07 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations (Redline) Published…
-
ASTM-D887 2008
D887-08 Standard Practices for Sampling Water-Formed Deposits Published By Publication Date Number of Pages ASTM…
-
ASTM-D5878 2008
D5878-08 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes Published By Publication Date…
-
ASTM-D5867 2005
D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume…
-
ASTM-D5487 2008
D5487-98(2008) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines Published By…
