ASTM-D5969 2005
$40.63
D5969-05e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
| Published By | Publication Date | Number of Pages |
| ASTM | 2005 | 8 |
1.1 This test method covers the determination of the corrosion-preventive properties of greases using grease-lubricated tapered roller bearings exposed to various concentrations of dilute synthetic sea water stored under wet conditions. It is based on Test Method D 1743, which is practiced using a similar procedure and distilled water. The reported result is a pass or fail rating as determined by at least two of three bearings.
1.2 Apparatus Dimensions The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 All Other Values The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method Significance and Use Apparatus |
| 2 | Reagents FIG. 1 |
| 3 | Standardization of Thrust Loading Device Preparation of Bearings FIG. 2 |
| 4 | Procedure FIG. 3 FIG. 4 |
| 5 | Rating Procedure Report FIG. 5 |
| 6 | Precision and Bias Keywords FIG. 5 |
| 7 | FIG. 6 TABLE 1 |
Related products
-
ASTM-D5909 2006
D5909-96a(2006) Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance Published…
-
ASTM-D5869 2007
D5869-07 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials Published By…
-
ASTM-D5967 2015
D5967-15 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine Published…
-
ASTM-D5869 2002
D5869-95(2002) Standard Practice for Dark Oven Heat Exposure of Bituminous Materials Published By Publication Date…
-
ASTM-D5949 2008
D5949-08 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) Published…
-
ASTM-D5269 2002
D5269-96(2002) Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery…
-
ASTM-D5989 2005
D5989-05 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) Published By…
-
ASTM-D5769 2015(Redline)
D5769-15 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines…
-
ASTM-D6969 2015
D6969-15 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis Published By Publication…
-
ASTM-D5966 2002
D5966-02 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty…
-
ASTM-D5469 2000
D5469-00 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems…
-
ASTM-D5989 2003
D5989-03 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) Published By…
-
ASTM-D5949 2001
D5949-01 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) Published…
-
ASTM-D5963 2001
D5963-97a(2001) Standard Test Method for Rubber—Property Abrasion Resistance (Rotary Drum Abrader) Published By Publication Date…
-
ASTM-D5968 2006
D5968-06 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C Published…
-
ASTM-D5269 2008
D5269-96(2008) Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery…
-
ASTM-D5369 2008
D5369-93(2008)e1 Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction…
-
ASTM-D5996 2005
D5996-05 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography…
-
ASTM-D5969 2005
D5969-05e2 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic…
-
ASTM-D5769 2015
D5769-15 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines…
-
ASTM-D5964 2015
D5964-15 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for…
-
ASTM-D5369 2003
D5369-93(2003) Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction…
-
ASTM-D5959 2007
D5959-96(2007) Standard Test Method for Bulk Density of Level Paintbrush Filaments Published By Publication Date…
-
ASTM-D2969 2004
D2969-04 Standard Test Methods for Steel Tire Cords Published By Publication Date Number of Pages…
-
ASTM-D5979 2002
D5979-96(2002) Standard Guide for Conceptualization and Characterization of Ground-Water Systems Published By Publication Date Number…
-
ASTM-D5966 2008
D5966-08 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty…
-
ASTM-D5979 2008
D5979-96(2008) Standard Guide for Conceptualization and Characterization of Groundwater Systems Published By Publication Date Number…
-
ASTM-D5929 2004
D5929-96(2004) Standard Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting…
-
ASTM-D3969 2001
D3969-01 Standard Test Method for Zirconium in Paint Driers by EDTA Method Published By Publication…
-
ASTM-D5969 2008
D5969-08 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic…
-
ASTM-D5909 2001
D5909-96a(2001) Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance Published…
-
ASTM-D5869 2000
D5869-95(2000)e1 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials Published By Publication Date…
-
ASTM-D5969 2005
D5969-05 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic…
-
ASTM-D6969 2008
D6969-03(2008) Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis Published By Publication…
-
ASTM-D5967 2005
D5967-05 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine Published…
-
ASTM-D5949 2001
D5949-01e1 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) Published…
-
ASTM-D5869 2007
D5869-07a Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials Published By…
-
ASTM-D5069 2007(Redline)
D5069-07 Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings (Redline) Published…
-
ASTM-D5969 2002
D5969-02 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic…
-
ASTM-D5469 2005
D5469-00(2005) Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems…
