ASTM-D633 2011
$35.75
D633-11 Standard Volume Correction Table for Road Tar
Published By | Publication Date | Number of Pages |
ASTM | 2011 | 3 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ASTM D633-11
Historical Standard: Standard Volume Correction Table for Road Tar
ASTM D633
Scope
1.1 This table has been prepared by the National Institute of Standards and Technology to meet a demand from the tar industry for a short and convenient table for reducing volumes of road tar to the basis of 15.6°C (60°F) when extreme accuracy is not required. The table shows the volume occupied at 15.6°C by a quantity of material occupying unit volume at the indicated temperature.
Keywords
road tar
ICS Code
ICS Number Code 93.080.20 (Road construction materials)
DOI: 10.1520/D0633-11
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | Scope Referenced Documents Significance and Use |
2 | TABLE 1 |
Standard Title | D633-11 Standard Volume Correction Table for Road Tar |
---|---|
Published Code | ASTM |
Publication Date | 2011 |
Pages Count | 3 |
ICS Codes | 93.080.20 - Road construction materials |
This document does not provide a preview.
Related products
-
ASTM-E633 2021(Redline)
E633-21 Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing (Redline) Published By Publication…
-
ASTM-D633 2011(Redline)
D633-11 Standard Volume Correction Table for Road Tar (Redline) Published By Publication Date Number of…
-
ASTM-D6339 2011
D6339-11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion…
-
ASTM-D6332 2012
D6332-12 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to…
-
ASTM-D6373 2013(Redline)
D6373-13 Standard Specification for Performance Graded Asphalt Binder (Redline) Published By Publication Date Number of…
-
ASTM-B633 2019(Redline)
B633-19 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel (Redline) Published By…
-
ASTM-D653 2011
D653-11 Standard Terminology Relating to Soil, Rock, and Contained Fluids Published By Publication Date Number…
-
ASTM-D653 2011(Redline)
D653-11 Standard Terminology Relating to Soil, Rock, and Contained Fluids (Redline) Published By Publication Date…
-
ASTM-B633 2011
B633-11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel Published By Publication…
-
ASTM-D6373 2016
D6373-16 Standard Specification for Performance Graded Asphalt Binder Published By Publication Date Number of Pages…
-
ASTM-D633 2001
D633-97(2001) Standard Volume Correction Table for Road Tar Published By Publication Date Number of Pages…
-
ASTM-B633 2011(Redline)
B633-11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel (Redline) Published By…
-
ASTM-D6353 2011
D6353-06(2011) Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum…
-
ASTM-D6383 2011(Redline)
D6383/D6383M-99(2011)e1 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material…
-
ASTM-D6433 2011(Redline)
D6433-11 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys (Redline) Published By…
-
ASTM-D6336 2021
D6336-11(2021) Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified…
-
ASTM-D6339 2011(Redline)
D6339-11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion…
-
ASTM-A633 2011
A633/A633M-01(2011) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates Published By Publication Date Number…
-
ASTM-D6433 2011
D6433-11 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys Published By Publication…
-
ASTM-D6433 2016
D6433-16 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys Published By Publication…
-
ASTM-D632 2012
D632-12 Standard Specification for Sodium Chloride Published By Publication Date Number of Pages ASTM 2012…
-
ASTM-D633 2016
D633-11(2016) Standard Volume Correction Table for Road Tar Published By Publication Date Number of Pages…
-
ASTM-D623 2019
D623-07(2019) Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression Published By…
-
ASTM-D6336 2011(Redline)
D6336-11 Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified…
-
ASTM-D632 2001
D632-01 Standard Specification for Sodium Chloride (Withdrawn 2010) Published By Publication Date Number of Pages…
-
ASTM-D6373 2021
D6373-21 Standard Specification for Performance-Graded Asphalt Binder Published By Publication Date Number of Pages ASTM…
-
ASTM-D6933 2018(Redline)
D6933-18 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) (Redline) Published By…
-
ASTM-D6373 2021(Redline)
D6373-21a Standard Specification for Performance-Graded Asphalt Binder (Redline) Published By Publication Date Number of Pages…
-
ASTM-D6733 2011
D6733-01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by…
-
ASTM-D6334 2012(Redline)
D6334-12 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Redline) Published…
-
ASTM-D6383 2011
D6383/D6383M-99(2011)e1 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material…
-
ASTM-D638 2001
D638-01 Standard Test Method for Tensile Properties of Plastics Published By Publication Date Number of…
-
ASTM-D6933 2013
D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) Published By Publication…
-
ASTM-D6335 2016(Redline)
D6335-16 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation…
-
ASTM-D333 2021
D333-01(2021) Standard Guide for Clear and Pigmented Lacquers Published By Publication Date Number of Pages…
-
ASTM-D6336 2011
D6336-11 Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified…
-
ASTM-E633 2021
E633-21 Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing Published By Publication Date…
-
ASTM-D6353 2017
D6353-06(2017)e1 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum…
-
ASTM-D5633 2016
D5633-04(2016) Standard Practice for Sampling with a Scoop Published By Publication Date Number of Pages…
-
ASTM-D6336 2017
D6336-11(2017) Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified…