ASTM-D6802 2002
$40.63
D6802-02 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
| Published By | Publication Date | Number of Pages |
| ASTM | 2002 | 6 |
1.1 This test method characterizes by spectrophotometry the relative level of dissolved decay products in mineral insulating oils of petroleum origin. While new oil is almost transparent to a monochromatic beam of light in the visible spectrum, the increasing concentration of dissolved decay products shift the absorbance curve to longer wavelengths.
1.2 This test method is applicable to compare the extent of dissolved decay products for oils in service. It can assess the effectiveness of used or stored oil purification during the reclamation process, as well.
1.3 The values stated in SI units are to be regarded as standard. The values stated in parentheses are provided for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method Significance and Use Interferences Apparatus Reagents and Materials Sampling |
| 2 | Preparation of Apparatus Procedure Interpretation of Results Report Precision and Bias Keywords TABLE 1 |
| 3 | FIG. 1 |
| 4 | FIG. 2 |
| 5 | FIG. 3 |
Related products
-
ASTM-D6820 2007
D6820-02(2007) Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation Published…
-
ASTM-D6502 2008
D6502-08 Standard Test Method for Continuous Measurement of On-line Composite Samples of Low Level Filterable…
-
ASTM-D6805 2002
D6805-02 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous…
-
ASTM-D6842 2002
D6842-02e1 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty…
-
ASTM-D6602 2003
D6602-03b Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other…
-
ASTM-D6800 2002
D6800-02 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS…
-
ASTM-D6809 2012
D6809-02(2012) Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related…
-
ASTM-D6832 2002
D6832-02 Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion…
-
ASTM-D6807 2002
D6807-02 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates…
-
ASTM-D6822 2002
D6822-02 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and…
-
ASTM-D6820 2020(Redline)
D6820-20 Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site…
-
ASTM-D6502 2022
D6502-10(2022) Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids…
-
ASTM-D6822 2008
D6822-02(2008) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and…
-
ASTM-D802 2002
D802-02 Standard Test Methods for Sampling and Testing Pine Oils Published By Publication Date Number…
-
ASTM-D6302 2004
D6302-98(2004) Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins Published By Publication…
-
ASTM-D6302 2009
D6302-98(2009) Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins Published By Publication…
-
ASTM-D3802 2005
D3802-79(2005) Standard Test Method for Ball-Pan Hardness of Activated Carbon Published By Publication Date Number…
-
ASTM-D4802 2002
D4802-02 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet Published By Publication Date Number of…
-
ASTM-D6805 2002
D6805-02e1 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions…
-
ASTM-D6202 2001
D6202-01 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars…
-
ASTM-D6202 2002
D6202-02 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars…
-
ASTM-D6702 2001
D6702-01 Standard Test Method for Determining the Dynamic Wiping Efficiency of Nonwoven Fabrics Not Used…
-
ASTM-D6820 2002
D6820-02 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation Published…
-
ASTM-D6852 2002
D6852-02 Standard Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials…
-
ASTM-D6804 2002
D6804-02 Standard Guide for Hand Hole Design in Corrugated Boxes Published By Publication Date Number…
-
ASTM-D6822 2012
D6822-12 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and…
-
ASTM-D6862 2003
D6862-03 Standard Test Method for 90 Degree Peel Resistance of Adhesives Published By Publication Date…
-
ASTM-D6803 2002
D6803-02 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted…
-
ASTM-D6809 2002
D6809-02 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related…
-
ASTM-D6602 2002
D6602-02 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other…
-
ASTM-D6892 2020
D6892-03(2020) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method) Published By…
-
ASTM-D6002 2002
D6002-96(2002)e1 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics (Withdrawn 2011) Published By…
-
ASTM-D6806 2002
D6806-02 Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography…
-
ASTM-D6803 2007
D6803-02(2007) Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted…
-
ASTM-D6892 2003
D6892-03 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method) Published By…
-
ASTM-D6808 2002
D6808-02 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis Published By…
-
ASTM-D6402 2004
D6402-99(2004) Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning…
-
ASTM-D5802 2001
D5802-95(2001) Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using…
-
ASTM-D6082 2022(Redline)
D6082-22 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils (Redline) Published By…
-
ASTM-D6502 2003
D6502-99(2003) Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in…
